#include "util.h"
#include "hitag2.h"
#include "string.h"
+#include "BigBuf.h"
static bool bQuiet;
-bool bCrypto;
-bool bAuthenticating;
-bool bPwd;
-bool bSuccessful;
+static bool bCrypto;
+static bool bAuthenticating;
+static bool bPwd;
+static bool bSuccessful;
-size_t nbytes(size_t nbits) {
- return (nbits/8)+((nbits%8)>0);
-}
-int LogTraceHitag(const uint8_t * btBytes, int iBits, int iSamples, uint32_t dwParity, int bReader)
-{
- // Return when trace is full
- if (traceLen >= TRACE_SIZE) return FALSE;
-
- // Trace the random, i'm curious
- rsamples += iSamples;
- trace[traceLen++] = ((rsamples >> 0) & 0xff);
- trace[traceLen++] = ((rsamples >> 8) & 0xff);
- trace[traceLen++] = ((rsamples >> 16) & 0xff);
- trace[traceLen++] = ((rsamples >> 24) & 0xff);
- if (!bReader) {
- trace[traceLen - 1] |= 0x80;
- }
- trace[traceLen++] = ((dwParity >> 0) & 0xff);
- trace[traceLen++] = ((dwParity >> 8) & 0xff);
- trace[traceLen++] = ((dwParity >> 16) & 0xff);
- trace[traceLen++] = ((dwParity >> 24) & 0xff);
- trace[traceLen++] = iBits;
- memcpy(trace + traceLen, btBytes, nbytes(iBits));
- traceLen += nbytes(iBits);
- return TRUE;
-}
struct hitag2_tag {
uint32_t uid;
},
};
-//#define TRACE_LENGTH 3000
-//uint8_t *trace = (uint8_t *) BigBuf;
-//int traceLen = 0;
-//int rsamples = 0;
+// ToDo: define a meaningful maximum size for auth_table. The bigger this is, the lower will be the available memory for traces.
+// Historically it used to be FREE_BUFFER_SIZE, which was 2744.
+#define AUTH_TABLE_LENGTH 2744
+static byte_t* auth_table;
+static size_t auth_table_pos = 0;
+static size_t auth_table_len = AUTH_TABLE_LENGTH;
-#define AUTH_TABLE_OFFSET FREE_BUFFER_OFFSET
-#define AUTH_TABLE_LENGTH FREE_BUFFER_SIZE
-byte_t* auth_table = (byte_t *)BigBuf+AUTH_TABLE_OFFSET;
-size_t auth_table_pos = 0;
-size_t auth_table_len = AUTH_TABLE_LENGTH;
-
-byte_t password[4];
-byte_t NrAr[8];
-byte_t key[8];
-uint64_t cipher_state;
+static byte_t password[4];
+static byte_t NrAr[8];
+static byte_t key[8];
+static uint64_t cipher_state;
/* Following is a modified version of cryptolib.com/ciphers/hitag2/ */
// Software optimized 48-bit Philips/NXP Mifare Hitag2 PCF7936/46/47/52 stream cipher algorithm by I.C. Wiener 2006-2007.
return c;
}
-int hitag2_reset(void)
+static int hitag2_reset(void)
{
tag.state = TAG_STATE_RESET;
tag.crypto_active = 0;
return 0;
}
-int hitag2_init(void)
+static int hitag2_init(void)
{
// memcpy(&tag, &resetdata, sizeof(tag));
hitag2_reset();
LOW(GPIO_SSC_DOUT);
}
-void hitag2_handle_reader_command(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen)
+
+static void hitag2_handle_reader_command(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen)
{
byte_t rx_air[HITAG_FRAME_LEN];
// Binary puls length modulation (BPLM) is used to encode the data stream
// This means that a transmission of a one takes longer than that of a zero
- // Enable modulation, which means, drop the the field
+ // Enable modulation, which means, drop the field
HIGH(GPIO_SSC_DOUT);
// Wait for 4-10 times the carrier period
LED_A_OFF();
}
+
static void hitag_reader_send_frame(const byte_t* frame, size_t frame_len)
{
// Send the content of the frame
}
// Send EOF
AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG;
- // Enable modulation, which means, drop the the field
+ // Enable modulation, which means, drop the field
HIGH(GPIO_SSC_DOUT);
// Wait for 4-10 times the carrier period
while(AT91C_BASE_TC0->TC_CV < T0*6);
size_t blocknr;
-bool hitag2_password(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
+static bool hitag2_password(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
// Reset the transmission frame length
*txlen = 0;
return true;
}
-bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
+static bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
// Reset the transmission frame length
*txlen = 0;
}
-bool hitag2_authenticate(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
+static bool hitag2_authenticate(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
// Reset the transmission frame length
*txlen = 0;
return true;
}
-bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
+
+static bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
+
// Reset the transmission frame length
*txlen = 0;
if (bCrypto) {
Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x Failed, removed entry!",NrAr[0],NrAr[1],NrAr[2],NrAr[3],NrAr[4],NrAr[5],NrAr[6],NrAr[7]);
- // Removing failed entry from authentiations table
- memcpy(auth_table+auth_table_pos,auth_table+auth_table_pos+8,8);
- auth_table_len -= 8;
+ // Removing failed entry from authentiations table
+ memcpy(auth_table+auth_table_pos,auth_table+auth_table_pos+8,8);
+ auth_table_len -= 8;
- // Return if we reached the end of the authentiactions table
+ // Return if we reached the end of the authentications table
bCrypto = false;
if (auth_table_pos == auth_table_len) {
return false;
}
-
- // Copy the next authentication attempt in row (at the same position, b/c we removed last failed entry)
+
+ // Copy the next authentication attempt in row (at the same position, b/c we removed last failed entry)
memcpy(NrAr,auth_table+auth_table_pos,8);
}
*txlen = 5;
return true;
}
+
void SnoopHitag(uint32_t type) {
int frame_count;
int response;
byte_t rx[HITAG_FRAME_LEN];
size_t rxlen=0;
- // Clean up trace and prepare it for storing frames
- iso14a_set_tracing(TRUE);
- iso14a_clear_trace();
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+ // Clean up trace and prepare it for storing frames
+ set_tracing(TRUE);
+ clear_trace();
+
auth_table_len = 0;
auth_table_pos = 0;
+
+ BigBuf_free();
+ auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
-
+
DbpString("Starting Hitag2 snoop");
LED_D_ON();
// Set up eavesdropping mode, frequency divisor which will drive the FPGA
// and analog mux selection.
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_TOGGLE_MODE);
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
RELAY_OFF();
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1);
AT91C_BASE_PIOA->PIO_BSR = GPIO_SSC_FRAME;
- // Disable timer during configuration
+ // Disable timer during configuration
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
// Capture mode, defaul timer source = MCK/2 (TIMER_CLOCK1), TIOA is external trigger,
bool bQuitTraceFull = false;
bQuiet = false;
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
// Clean up trace and prepare it for storing frames
- iso14a_set_tracing(TRUE);
- iso14a_clear_trace();
+ set_tracing(TRUE);
+ clear_trace();
+
auth_table_len = 0;
auth_table_pos = 0;
+ byte_t* auth_table;
+ BigBuf_free();
+ auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
DbpString("Starting Hitag2 simulation");
// Set up simulator mode, frequency divisor which will drive the FPGA
// and analog mux selection.
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_READER_FIELD);
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
RELAY_OFF();
// Disable timer during configuration
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
- // Capture mode, defaul timer source = MCK/2 (TIMER_CLOCK1), TIOA is external trigger,
+ // Capture mode, default timer source = MCK/2 (TIMER_CLOCK1), TIOA is external trigger,
// external trigger rising edge, load RA on rising edge of TIOA.
AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_TIMER_DIV1_CLOCK | AT91C_TC_ETRGEDG_RISING | AT91C_TC_ABETRG | AT91C_TC_LDRA_RISING;
- // Enable and reset counter
- AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
-
// Reset the received frame, frame count and timing info
memset(rx,0x00,sizeof(rx));
frame_count = 0;
response = 0;
overflow = 0;
+
+ // Enable and reset counter
+ AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
while(!BUTTON_PRESS()) {
// Watchdog hit
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS;
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-// Dbprintf("frame received: %d",frame_count);
-// Dbprintf("Authentication Attempts: %d",(auth_table_len/8));
-// DbpString("All done");
+
+ DbpString("Sim Stopped");
+
}
void ReaderHitag(hitag_function htf, hitag_data* htd) {
bool bStop;
bool bQuitTraceFull = false;
- // Reset the return status
- bSuccessful = false;
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+ // Reset the return status
+ bSuccessful = false;
// Clean up trace and prepare it for storing frames
- iso14a_set_tracing(TRUE);
- iso14a_clear_trace();
+ set_tracing(TRUE);
+ clear_trace();
+
DbpString("Starting Hitag reader family");
// Check configuration
switch(htf) {
case RHT2F_PASSWORD: {
- Dbprintf("List identifier in password mode");
+ Dbprintf("List identifier in password mode");
memcpy(password,htd->pwd.password,4);
- blocknr = 0;
+ blocknr = 0;
bQuitTraceFull = false;
bQuiet = false;
bPwd = false;
Dbhexdump(8,NrAr,false);
bQuiet = false;
bCrypto = false;
- bAuthenticating = false;
+ bAuthenticating = false;
bQuitTraceFull = true;
} break;
case RHT2F_CRYPTO: {
DbpString("Authenticating using key:");
- memcpy(key,htd->crypto.key,6);
+ memcpy(key,htd->crypto.key,6); //HACK; 4 or 6?? I read both in the code.
Dbhexdump(6,key,false);
- blocknr = 0;
+ blocknr = 0;
bQuiet = false;
bCrypto = false;
- bAuthenticating = false;
+ bAuthenticating = false;
bQuitTraceFull = true;
} break;
case RHT2F_TEST_AUTH_ATTEMPTS: {
Dbprintf("Testing %d authentication attempts",(auth_table_len/8));
auth_table_pos = 0;
- memcpy(NrAr,auth_table,8);
+ memcpy(NrAr, auth_table, 8);
bQuitTraceFull = false;
bQuiet = false;
bCrypto = false;
projects / proxmark3-svn / blobdiff