#include "mifare.h"
#include "cmdhfmfu.h"
#include "mifarehost.h"
+#include "cliparser/cliparser.h"
#include "emv/apduinfo.h"
#include "emv/emvcore.h"
int CmdHF14AReader(const char *Cmd) {
uint32_t cm = ISO14A_CONNECT;
- bool disconnectAfter = true;
+ bool leaveSignalON = false;
- int cmdp = 0;
- while(param_getchar(Cmd, cmdp) != 0x00) {
- switch(param_getchar(Cmd, cmdp)) {
- case 'h':
- case 'H':
- PrintAndLog("Usage: hf 14a reader [k|x] [3]");
- PrintAndLog(" k keep the field active after command executed");
- PrintAndLog(" x just drop the signal field");
- PrintAndLog(" 3 ISO14443-3 select only (skip RATS)");
- return 0;
- case '3':
- cm |= ISO14A_NO_RATS;
- break;
- case 'k':
- case 'K':
- disconnectAfter = false;
- break;
- case 'x':
- case 'X':
- cm &= ~ISO14A_CONNECT;
- break;
- default:
- PrintAndLog("Unknown command.");
- return 1;
- }
-
- cmdp++;
+ CLIParserInit("hf 14a reader", "Executes ISO1443A anticollision-select group of commands.", NULL);
+ void* argtable[] = {
+ arg_param_begin,
+ arg_lit0("kK", "keep", "keep the field active after command executed"),
+ arg_lit0("xX", "drop", "just drop the signal field"),
+ arg_lit0("3", NULL, "ISO14443-3 select only (skip RATS)"),
+ arg_param_end
+ };
+ if (CLIParserParseString(Cmd, argtable, arg_getsize(argtable), true)){
+ CLIParserFree();
+ return 0;
}
-
- if (!disconnectAfter)
+
+ leaveSignalON = arg_get_lit(1);
+ if (arg_get_lit(2)) {
+ cm = cm - ISO14A_CONNECT;
+ }
+ if (arg_get_lit(3)) {
+ cm |= ISO14A_NO_RATS;
+ }
+
+ CLIParserFree();
+
+ if (leaveSignalON)
cm |= ISO14A_NO_DISCONNECT;
UsbCommand c = {CMD_READER_ISO_14443a, {cm, 0, 0}};
if(card.ats_len >= 3) { // a valid ATS consists of at least the length byte (TL) and 2 CRC bytes
PrintAndLog(" ATS : %s", sprint_hex(card.ats, card.ats_len));
}
- if (!disconnectAfter) {
+ if (leaveSignalON) {
PrintAndLog("Card is selected. You can now start sending commands");
}
}
- if (disconnectAfter) {
+ if (!leaveSignalON) {
PrintAndLog("Field dropped.");
}
bool activateField = false;
bool leaveSignalON = false;
bool decodeTLV = false;
+
+ CLIParserInit("hf 14a apdu",
+ "Sends an ISO 7816-4 APDU via ISO 14443-4 block transmission protocol (T=CL)",
+ "Sample:\n\thf 14a apdu -st 00A404000E325041592E5359532E444446303100\n");
+
+ void* argtable[] = {
+ arg_param_begin,
+ arg_lit0("sS", "select", "activate field and select card"),
+ arg_lit0("kK", "keep", "leave the signal field ON after receive response"),
+ arg_lit0("tT", "tlv", "executes TLV decoder if it possible"),
+ arg_strx1(NULL, NULL, "<APDU (hex)>", NULL),
+ arg_param_end
+ };
+ CLIExecWithReturn(cmd, argtable, false);
- if (strlen(cmd) < 2) {
- PrintAndLog("Usage: hf 14a apdu [-s] [-k] [-t] <APDU (hex)>");
- PrintAndLog("Command sends an ISO 7816-4 APDU via ISO 14443-4 block transmission protocol (T=CL)");
- PrintAndLog(" -s activate field and select card");
- PrintAndLog(" -k leave the signal field ON after receive response");
- PrintAndLog(" -t executes TLV decoder if it possible. TODO!!!!");
- return 0;
- }
+ activateField = arg_get_lit(1);
+ leaveSignalON = arg_get_lit(2);
+ decodeTLV = arg_get_lit(3);
+ // len = data + PCB(1b) + CRC(2b)
+ CLIGetStrBLessWithReturn(4, data, &datalen, 1 + 2);
- int cmdp = 0;
- while(param_getchar(cmd, cmdp) != 0x00) {
- char c = param_getchar(cmd, cmdp);
- if ((c == '-') && (param_getlength(cmd, cmdp) == 2))
- switch (param_getchar_indx(cmd, 1, cmdp)) {
- case 's':
- case 'S':
- activateField = true;
- break;
- case 'k':
- case 'K':
- leaveSignalON = true;
- break;
- case 't':
- case 'T':
- decodeTLV = true;
- break;
- default:
- PrintAndLog("Unknown parameter '%c'", param_getchar_indx(cmd, 1, cmdp));
- return 1;
- }
-
- if (isxdigit((unsigned char)c)) {
- // len = data + PCB(1b) + CRC(2b)
- switch(param_gethex_to_eol(cmd, cmdp, data, sizeof(data) - 1 - 2, &datalen)) {
- case 1:
- PrintAndLog("Invalid HEX value.");
- return 1;
- case 2:
- PrintAndLog("APDU too large.");
- return 1;
- case 3:
- PrintAndLog("Hex must have even number of digits.");
- return 1;
- }
-
- // we get all the hex to end of line with spaces
- break;
- }
-
- cmdp++;
- }
+ CLIParserFree();
+// PrintAndLog("---str [%d] %s", arg_get_str(4)->count, arg_get_str(4)->sval[0]);
PrintAndLog(">>>>[%s%s%s] %s", activateField ? "sel ": "", leaveSignalON ? "keep ": "", decodeTLV ? "TLV": "", sprint_hex(data, datalen));
int res = ExchangeAPDU14a(data, datalen, activateField, leaveSignalON, data, USB_CMD_DATA_SIZE, &datalen);
bool bTimeout = false;
uint32_t timeout = 0;
bool topazmode = false;
- char buf[5]="";
- int i = 0;
uint8_t data[USB_CMD_DATA_SIZE];
- uint16_t datalen = 0;
- uint32_t temp;
-
- if (strlen(cmd)<2) {
- PrintAndLog("Usage: hf 14a raw [-r] [-c] [-p] [-f] [-b] [-t] <number of bits> <0A 0B 0C ... hex>");
- PrintAndLog(" -r do not read response");
- PrintAndLog(" -c calculate and append CRC");
- PrintAndLog(" -p leave the signal field ON after receive");
- PrintAndLog(" -a active signal field ON without select");
- PrintAndLog(" -s active signal field ON with select");
- PrintAndLog(" -b number of bits to send. Useful for send partial byte");
- PrintAndLog(" -t timeout in ms");
- PrintAndLog(" -T use Topaz protocol to send command");
- PrintAndLog(" -3 ISO14443-3 select only (skip RATS)");
- return 0;
- }
-
+ int datalen = 0;
- // strip
- while (*cmd==' ' || *cmd=='\t') cmd++;
-
- while (cmd[i]!='\0') {
- if (cmd[i]==' ' || cmd[i]=='\t') { i++; continue; }
- if (cmd[i]=='-') {
- switch (cmd[i+1]) {
- case 'r':
- reply = false;
- break;
- case 'c':
- crc = true;
- break;
- case 'p':
- power = true;
- break;
- case 'a':
- active = true;
- break;
- case 's':
- active_select = true;
- break;
- case 'b':
- sscanf(cmd+i+2,"%d",&temp);
- numbits = temp & 0xFFFF;
- i+=3;
- while(cmd[i]!=' ' && cmd[i]!='\0') { i++; }
- i-=2;
- break;
- case 't':
- bTimeout = true;
- sscanf(cmd+i+2,"%d",&temp);
- timeout = temp;
- i+=3;
- while(cmd[i]!=' ' && cmd[i]!='\0') { i++; }
- i-=2;
- break;
- case 'T':
- topazmode = true;
- break;
- case '3':
- no_rats = true;
- break;
- default:
- PrintAndLog("Invalid option");
- return 0;
- }
- i+=2;
- continue;
- }
- if ((cmd[i]>='0' && cmd[i]<='9') ||
- (cmd[i]>='a' && cmd[i]<='f') ||
- (cmd[i]>='A' && cmd[i]<='F') ) {
- buf[strlen(buf)+1]=0;
- buf[strlen(buf)]=cmd[i];
- i++;
-
- if (strlen(buf)>=2) {
- sscanf(buf,"%x",&temp);
- data[datalen]=(uint8_t)(temp & 0xff);
- *buf=0;
- if (datalen > sizeof(data)-1) {
- if (crc)
- PrintAndLog("Buffer is full, we can't add CRC to your data");
- break;
- } else {
- datalen++;
- }
- }
- continue;
- }
- PrintAndLog("Invalid char on input");
+ // extract parameters
+ CLIParserInit("hf 14a raw", "Send raw hex data to tag",
+ "Sample:\n"\
+ "\thf 14a raw -pa -b7 -t1000 52 -- execute WUPA\n"\
+ "\thf 14a raw -p 9320 -- anticollision\n"\
+ "\thf 14a raw -psc 60 00 -- select and mifare AUTH\n");
+ void* argtable[] = {
+ arg_param_begin,
+ arg_lit0("rR", "nreply", "do not read response"),
+ arg_lit0("cC", "crc", "calculate and append CRC"),
+ arg_lit0("pP", "power", "leave the signal field ON after receive"),
+ arg_lit0("aA", "active", "active signal field ON without select"),
+ arg_lit0("sS", "actives", "active signal field ON with select"),
+ arg_int0("bB", "bits", NULL, "number of bits to send. Useful for send partial byte"),
+ arg_int0("t", "timeout", NULL, "timeout in ms"),
+ arg_lit0("T", "topaz", "use Topaz protocol to send command"),
+ arg_lit0("3", NULL, "ISO14443-3 select only (skip RATS)"),
+ arg_strx1(NULL, NULL, "<data (hex)>", NULL),
+ arg_param_end
+ };
+ // defaults
+ arg_get_int(6) = 0;
+ arg_get_int(7) = 0;
+
+ if (CLIParserParseString(cmd, argtable, arg_getsize(argtable), false)){
+ CLIParserFree();
return 0;
}
-
+
+ reply = !arg_get_lit(1);
+ crc = arg_get_lit(2);
+ power = arg_get_lit(3);
+ active = arg_get_lit(4);
+ active_select = arg_get_lit(5);
+ numbits = arg_get_int(6) & 0xFFFF;
+ timeout = arg_get_int(7);
+ bTimeout = (timeout > 0);
+ topazmode = arg_get_lit(8);
+ no_rats = arg_get_lit(9);
+ // len = data + CRC(2b)
+ if (CLIParamHexToBuf(arg_get_str(10), data, sizeof(data) -2, &datalen)) {
+ CLIParserFree();
+ return 1;
+ }
+
+ CLIParserFree();
+
+ // logic
if(crc && datalen>0 && datalen<sizeof(data)-2)
{
uint8_t first, second;
projects / proxmark3-svn / blobdiff