git.zerfleddert.de Git - proxmark3-svn/blobdiff

index eabe9fbe627c15c97d8065bdb99b4b0c4939369a..e3bd1fe0192648832cd5cad7521b15597bed3238 100644 (file)

--- a/armsrc/appmain.c

+++ b/armsrc/appmain.c

@@ -21,16 +21,27 @@

#include "printf.h"

#include "string.h"

#include "legicrf.h"

#include "printf.h"

#include "string.h"

#include "legicrf.h"

+#include "legicrfsim.h"

#include "hitag2.h"

#include "hitagS.h"

#include "hitag2.h"

#include "hitagS.h"

+#include "iclass.h"

+#include "iso14443b.h"

+#include "iso15693.h"

#include "lfsampling.h"

#include "BigBuf.h"

#include "lfsampling.h"

#include "BigBuf.h"

+#include "mifarecmd.h"

#include "mifareutil.h"

+#include "mifaresim.h"

#include "pcf7931.h"

+#include "i2c.h"

+#include "hfsnoop.h"

+#include "fpgaloader.h"

#ifdef WITH_LCD

#include "LCD.h"

#endif

#ifdef WITH_LCD

#include "LCD.h"

#endif

+static uint32_t hw_capabilities;

// Craig Young - 14a stand-alone code

#ifdef WITH_ISO14443a

#include "iso14443a.h"

// Craig Young - 14a stand-alone code

#ifdef WITH_ISO14443a

#include "iso14443a.h"

@@ -138,7 +149,7 @@ void Dbhexdump(int len, uint8_t *d, bool bAsci) {

static int ReadAdc(int ch)

{

// Note: ADC_MODE_PRESCALE and ADC_MODE_SAMPLE_HOLD_TIME are set to the maximum allowed value.

static int ReadAdc(int ch)

{

// Note: ADC_MODE_PRESCALE and ADC_MODE_SAMPLE_HOLD_TIME are set to the maximum allowed value.

- // AMPL_HI is are high impedance (10MOhm || 1MOhm) output, the input capacitance of the ADC is 12pF (typical). This results in a time constant

+ // AMPL_HI is a high impedance (10MOhm || 1MOhm) output, the input capacitance of the ADC is 12pF (typical). This results in a time constant

// of RC = (0.91MOhm) * 12pF = 10.9us. Even after the maximum configurable sample&hold time of 40us the input capacitor will not be fully charged.

// The maths are:

// of RC = (0.91MOhm) * 12pF = 10.9us. Even after the maximum configurable sample&hold time of 40us the input capacitor will not be fully charged.

// The maths are:

@@ -157,7 +168,7 @@ static int ReadAdc(int ch)

while(!(AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ch))) {};

- return AT91C_BASE_ADC->ADC_CDR[ch];

+ return AT91C_BASE_ADC->ADC_CDR[ch] & 0x3ff;

}

int AvgAdc(int ch) // was static - merlok

}

int AvgAdc(int ch) // was static - merlok

@@ -172,6 +183,26 @@ int AvgAdc(int ch) // was static - merlok

return (a + 15) >> 5;

}

return (a + 15) >> 5;

}

+static int AvgAdc_Voltage_HF(void)

+ int AvgAdc_Voltage_Low, AvgAdc_Voltage_High;

+ AvgAdc_Voltage_Low= (MAX_ADC_HF_VOLTAGE_LOW * AvgAdc(ADC_CHAN_HF_LOW)) >> 10;

+ // if voltage range is about to be exceeded, use high voltage ADC channel if available (RDV40 only)

+ if (AvgAdc_Voltage_Low > MAX_ADC_HF_VOLTAGE_LOW - 300) {

+ AvgAdc_Voltage_High = (MAX_ADC_HF_VOLTAGE_HIGH * AvgAdc(ADC_CHAN_HF_HIGH)) >> 10;

+ if (AvgAdc_Voltage_High >= AvgAdc_Voltage_Low) {

+ return AvgAdc_Voltage_High;

+ }

+ return AvgAdc_Voltage_Low;

+static int AvgAdc_Voltage_LF(void)

+ return (MAX_ADC_LF_VOLTAGE * AvgAdc(ADC_CHAN_LF)) >> 10;

void MeasureAntennaTuningLfOnly(int *vLf125, int *vLf134, int *peakf, int *peakv, uint8_t LF_Results[])

{

int i, adcval = 0, peak = 0;

void MeasureAntennaTuningLfOnly(int *vLf125, int *vLf134, int *peakf, int *peakv, uint8_t LF_Results[])

{

int i, adcval = 0, peak = 0;

@@ -193,7 +224,7 @@ void MeasureAntennaTuningLfOnly(int *vLf125, int *vLf134, int *peakf, int *peakv

WDT_HIT();

FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);

SpinDelay(20);

WDT_HIT();

FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);

SpinDelay(20);

- adcval = ((MAX_ADC_LF_VOLTAGE * AvgAdc(ADC_CHAN_LF)) >> 10);

+ adcval = AvgAdc_Voltage_LF();

if (i==95) *vLf125 = adcval; // voltage at 125Khz

if (i==89) *vLf134 = adcval; // voltage at 134Khz

if (i==95) *vLf125 = adcval; // voltage at 125Khz

if (i==89) *vLf134 = adcval; // voltage at 134Khz

@@ -216,11 +247,10 @@ void MeasureAntennaTuningHfOnly(int *vHf)

// Let the FPGA drive the high-frequency antenna around 13.56 MHz.

LED_A_ON();

FpgaDownloadAndGo(FPGA_BITSTREAM_HF);

// Let the FPGA drive the high-frequency antenna around 13.56 MHz.

LED_A_ON();

FpgaDownloadAndGo(FPGA_BITSTREAM_HF);

- FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);

+ FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER);

SpinDelay(20);

- *vHf = (MAX_ADC_HF_VOLTAGE * AvgAdc(ADC_CHAN_HF)) >> 10;

+ *vHf = AvgAdc_Voltage_HF();

LED_A_OFF();

return;

}

return;

}

@@ -259,11 +289,11 @@ void MeasureAntennaTuningHf(void)

// Let the FPGA drive the high-frequency antenna around 13.56 MHz.

FpgaDownloadAndGo(FPGA_BITSTREAM_HF);

// Let the FPGA drive the high-frequency antenna around 13.56 MHz.

FpgaDownloadAndGo(FPGA_BITSTREAM_HF);

- FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);

+ FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER);

for (;;) {

- SpinDelay(20);

- vHf = (MAX_ADC_HF_VOLTAGE * AvgAdc(ADC_CHAN_HF)) >> 10;

+ SpinDelay(500);

+ vHf = AvgAdc_Voltage_HF();

Dbprintf("%d mV",vHf);

if (BUTTON_PRESS()) break;

Dbprintf("%d mV",vHf);

if (BUTTON_PRESS()) break;

@@ -288,8 +318,23 @@ extern struct version_information version_information;

/* bootrom version information is pointed to from _bootphase1_version_pointer */

extern char *_bootphase1_version_pointer, _flash_start, _flash_end, _bootrom_start, _bootrom_end, __data_src_start__;

/* bootrom version information is pointed to from _bootphase1_version_pointer */

extern char *_bootphase1_version_pointer, _flash_start, _flash_end, _bootrom_start, _bootrom_end, __data_src_start__;

+void set_hw_capabilities(void)

+ if (I2C_is_available()) {

+ hw_capabilities |= HAS_SMARTCARD_SLOT;

+ }

+ if (false) { // TODO: implement a test

+ hw_capabilities |= HAS_EXTRA_FLASH_MEM;

+ }

void SendVersion(void)

{

void SendVersion(void)

{

+ set_hw_capabilities();

char temp[USB_CMD_DATA_SIZE]; /* Limited data payload in USB packets */

char VersionString[USB_CMD_DATA_SIZE] = { '\0' };

char temp[USB_CMD_DATA_SIZE]; /* Limited data payload in USB packets */

char VersionString[USB_CMD_DATA_SIZE] = { '\0' };

@@ -310,15 +355,20 @@ void SendVersion(void)

for (int i = 0; i < fpga_bitstream_num; i++) {

strncat(VersionString, fpga_version_information[i], sizeof(VersionString) - strlen(VersionString) - 1);

for (int i = 0; i < fpga_bitstream_num; i++) {

strncat(VersionString, fpga_version_information[i], sizeof(VersionString) - strlen(VersionString) - 1);

- if (i < fpga_bitstream_num - 1) {

- strncat(VersionString, "\n", sizeof(VersionString) - strlen(VersionString) - 1);

- }

+ strncat(VersionString, "\n", sizeof(VersionString) - strlen(VersionString) - 1);

}

+ // test availability of SmartCard slot

+ if (I2C_is_available()) {

+ strncat(VersionString, "SmartCard Slot: available\n", sizeof(VersionString) - strlen(VersionString) - 1);

+ } else {

+ strncat(VersionString, "SmartCard Slot: not available\n", sizeof(VersionString) - strlen(VersionString) - 1);

+ }

// Send Chip ID and used flash memory

uint32_t text_and_rodata_section_size = (uint32_t)&__data_src_start__ - (uint32_t)&_flash_start;

uint32_t compressed_data_section_size = common_area.arg1;

// Send Chip ID and used flash memory

uint32_t text_and_rodata_section_size = (uint32_t)&__data_src_start__ - (uint32_t)&_flash_start;

uint32_t compressed_data_section_size = common_area.arg1;

- cmd_send(CMD_ACK, *(AT91C_DBGU_CIDR), text_and_rodata_section_size + compressed_data_section_size, 0, VersionString, strlen(VersionString));

+ cmd_send(CMD_ACK, *(AT91C_DBGU_CIDR), text_and_rodata_section_size + compressed_data_section_size, hw_capabilities, VersionString, strlen(VersionString));

}

// measure the USB Speed by sending SpeedTestBufferSize bytes to client and measuring the elapsed time.

}

// measure the USB Speed by sending SpeedTestBufferSize bytes to client and measuring the elapsed time.

@@ -357,17 +407,20 @@ void SendStatus(void)

{

BigBuf_print_status();

Fpga_print_status();

{

BigBuf_print_status();

Fpga_print_status();

+#ifdef WITH_SMARTCARD

+ I2C_print_status();

+#endif

printConfig(); //LF Sampling config

printUSBSpeed();

Dbprintf("Various");

printConfig(); //LF Sampling config

printUSBSpeed();

Dbprintf("Various");

- Dbprintf(" MF_DBGLEVEL......%d", MF_DBGLEVEL);

- Dbprintf(" ToSendMax........%d",ToSendMax);

- Dbprintf(" ToSendBit........%d",ToSendBit);

+ Dbprintf(" MF_DBGLEVEL........%d", MF_DBGLEVEL);

+ Dbprintf(" ToSendMax..........%d", ToSendMax);

+ Dbprintf(" ToSendBit..........%d", ToSendBit);

cmd_send(CMD_ACK,1,0,0,0,0);

}

cmd_send(CMD_ACK,1,0,0,0,0);

}

-#if defined(WITH_ISO14443a_StandAlone) || defined(WITH_LF)

+#if defined(WITH_ISO14443a_StandAlone) || defined(WITH_LF_StandAlone)

#define OPTS 2

@@ -635,14 +688,14 @@ void StandAloneMode14a()

}

-#elif WITH_LF

+#elif WITH_LF_StandAlone

// samy's sniff and repeat routine

void SamyRun()

{

StandAloneMode();

FpgaDownloadAndGo(FPGA_BITSTREAM_LF);

// samy's sniff and repeat routine

void SamyRun()

{

StandAloneMode();

FpgaDownloadAndGo(FPGA_BITSTREAM_LF);

- int high[OPTS], low[OPTS];

+ int tops[OPTS], high[OPTS], low[OPTS];

int selected = 0;

int playing = 0;

int cardRead = 0;

int selected = 0;

int playing = 0;

int cardRead = 0;

@@ -676,8 +729,11 @@ void SamyRun()

/* need this delay to prevent catching some weird data */

SpinDelay(500);

/* need this delay to prevent catching some weird data */

SpinDelay(500);

- CmdHIDdemodFSK(1, &high[selected], &low[selected], 0);

- Dbprintf("Recorded %x %x%08x", selected, high[selected], low[selected]);

+ CmdHIDdemodFSK(1, &tops[selected], &high[selected], &low[selected], 0);

+ if (tops[selected] > 0)

+ Dbprintf("Recorded %x %x%08x%08x", selected, tops[selected], high[selected], low[selected]);

+ else

+ Dbprintf("Recorded %x %x%08x", selected, high[selected], low[selected]);

LEDsoff();

LED(selected + 1, 0);

LEDsoff();

LED(selected + 1, 0);

@@ -698,7 +754,10 @@ void SamyRun()

LED(LED_ORANGE, 0);

// record

LED(LED_ORANGE, 0);

// record

- Dbprintf("Cloning %x %x%08x", selected, high[selected], low[selected]);

+ if (tops[selected] > 0)

+ Dbprintf("Cloning %x %x%08x%08x", selected, tops[selected], high[selected], low[selected]);

+ else

+ Dbprintf("Cloning %x %x%08x", selected, high[selected], low[selected]);

// wait for button to be released

while(BUTTON_PRESS())

// wait for button to be released

while(BUTTON_PRESS())

@@ -707,8 +766,11 @@ void SamyRun()

/* need this delay to prevent catching some weird data */

SpinDelay(500);

/* need this delay to prevent catching some weird data */

SpinDelay(500);

- CopyHIDtoT55x7(0, high[selected], low[selected], 0);

- Dbprintf("Cloned %x %x%08x", selected, high[selected], low[selected]);

+ CopyHIDtoT55x7(tops[selected] & 0x000FFFFF, high[selected], low[selected], (tops[selected] != 0 && ((high[selected]& 0xFFFFFFC0) != 0)), 0x1D);

+ if (tops[selected] > 0)

+ Dbprintf("Cloned %x %x%08x%08x", selected, tops[selected], high[selected], low[selected]);

+ else

+ Dbprintf("Cloned %x %x%08x", selected, high[selected], low[selected]);

LEDsoff();

LED(selected + 1, 0);

LEDsoff();

LED(selected + 1, 0);

@@ -741,8 +803,12 @@ void SamyRun()

// wait for button to be released

while(BUTTON_PRESS())

WDT_HIT();

// wait for button to be released

while(BUTTON_PRESS())

WDT_HIT();

- Dbprintf("%x %x%08x", selected, high[selected], low[selected]);

- CmdHIDsimTAG(high[selected], low[selected], 0);

+ if (tops[selected] > 0)

+ Dbprintf("%x %x%08x%08x", selected, tops[selected], high[selected], low[selected]);

+ else

+ Dbprintf("%x %x%08x", selected, high[selected], low[selected]);

+ CmdHIDsimTAG(tops[selected], high[selected], low[selected], 0);

DbpString("Done playing");

if (BUTTON_HELD(1000) > 0)

{

DbpString("Done playing");

if (BUTTON_HELD(1000) > 0)

{

@@ -807,13 +873,15 @@ static const int LIGHT_LEN = sizeof(LIGHT_SCHEME)/sizeof(LIGHT_SCHEME[0]);

void ListenReaderField(int limit)

{

void ListenReaderField(int limit)

{

- int lf_av, lf_av_new, lf_baseline= 0, lf_max;

- int hf_av, hf_av_new, hf_baseline= 0, hf_max;

+ int lf_av, lf_av_new=0, lf_baseline= 0, lf_max;

+ int hf_av, hf_av_new=0, hf_baseline= 0, hf_max;

int mode=1, display_val, display_max, i;

-#define LF_ONLY 1

-#define HF_ONLY 2

-#define REPORT_CHANGE 10 // report new values only if they have changed at least by REPORT_CHANGE

+#define LF_ONLY 1

+#define HF_ONLY 2

+#define REPORT_CHANGE_PERCENT 5 // report new values only if they have changed at least by REPORT_CHANGE_PERCENT

+#define MIN_HF_FIELD 300 // in mode 1 signal HF field greater than MIN_HF_FIELD above baseline

+#define MIN_LF_FIELD 1200 // in mode 1 signal LF field greater than MIN_LF_FIELD above baseline

// switch off FPGA - we don't want to measure our own signal

@@ -822,23 +890,23 @@ void ListenReaderField(int limit)

LEDsoff();

- lf_av = lf_max = AvgAdc(ADC_CHAN_LF);

+ lf_av = lf_max = AvgAdc_Voltage_LF();

if(limit != HF_ONLY) {

- Dbprintf("LF 125/134kHz Baseline: %dmV", (MAX_ADC_LF_VOLTAGE * lf_av) >> 10);

+ Dbprintf("LF 125/134kHz Baseline: %dmV", lf_av);

lf_baseline = lf_av;

}

lf_baseline = lf_av;

}

- hf_av = hf_max = AvgAdc(ADC_CHAN_HF);

+ hf_av = hf_max = AvgAdc_Voltage_HF();

if (limit != LF_ONLY) {

- Dbprintf("HF 13.56MHz Baseline: %dmV", (MAX_ADC_HF_VOLTAGE * hf_av) >> 10);

+ Dbprintf("HF 13.56MHz Baseline: %dmV", hf_av);

hf_baseline = hf_av;

}

for(;;) {

hf_baseline = hf_av;

}

for(;;) {

+ SpinDelay(500);

if (BUTTON_PRESS()) {

- SpinDelay(500);

switch (mode) {

case 1:

mode=2;

switch (mode) {

case 1:

mode=2;

@@ -851,21 +919,22 @@ void ListenReaderField(int limit)

return;

break;

}

return;

break;

}

+ while (BUTTON_PRESS());

}

WDT_HIT();

if (limit != HF_ONLY) {

if(mode == 1) {

}

WDT_HIT();

if (limit != HF_ONLY) {

if(mode == 1) {

- if (ABS(lf_av - lf_baseline) > REPORT_CHANGE)

+ if (lf_av - lf_baseline > MIN_LF_FIELD)

LED_D_ON();

else

LED_D_OFF();

}

LED_D_ON();

else

LED_D_OFF();

}

- lf_av_new = AvgAdc(ADC_CHAN_LF);

+ lf_av_new = AvgAdc_Voltage_LF();

// see if there's a significant change

- if(ABS(lf_av - lf_av_new) > REPORT_CHANGE) {

- Dbprintf("LF 125/134kHz Field Change: %5dmV", (MAX_ADC_LF_VOLTAGE * lf_av_new) >> 10);

+ if (ABS((lf_av - lf_av_new)*100/(lf_av?lf_av:1)) > REPORT_CHANGE_PERCENT) {

+ Dbprintf("LF 125/134kHz Field Change: %5dmV", lf_av_new);

lf_av = lf_av_new;

if (lf_av > lf_max)

lf_max = lf_av;

lf_av = lf_av_new;

if (lf_av > lf_max)

lf_max = lf_av;

@@ -874,16 +943,17 @@ void ListenReaderField(int limit)

if (limit != LF_ONLY) {

if (mode == 1){

if (limit != LF_ONLY) {

if (mode == 1){

- if (ABS(hf_av - hf_baseline) > REPORT_CHANGE)

+ if (hf_av - hf_baseline > MIN_HF_FIELD)

LED_B_ON();

else

LED_B_OFF();

}

LED_B_ON();

else

LED_B_OFF();

}

- hf_av_new = AvgAdc(ADC_CHAN_HF);

+ hf_av_new = AvgAdc_Voltage_HF();

// see if there's a significant change

- if(ABS(hf_av - hf_av_new) > REPORT_CHANGE) {

- Dbprintf("HF 13.56MHz Field Change: %5dmV", (MAX_ADC_HF_VOLTAGE * hf_av_new) >> 10);

+ if (ABS((hf_av - hf_av_new)*100/(hf_av?hf_av:1)) > REPORT_CHANGE_PERCENT) {

+ Dbprintf("HF 13.56MHz Field Change: %5dmV", hf_av_new);

hf_av = hf_av_new;

if (hf_av > hf_max)

hf_max = hf_av;

hf_av = hf_av_new;

if (hf_av > hf_max)

hf_max = hf_av;

@@ -928,7 +998,7 @@ void UsbPacketReceived(uint8_t *packet, int len)

switch(c->cmd) {

#ifdef WITH_LF

case CMD_SET_LF_SAMPLING_CONFIG:

switch(c->cmd) {

#ifdef WITH_LF

case CMD_SET_LF_SAMPLING_CONFIG:

- setSamplingConfig((sample_config *) c->d.asBytes);

+ setSamplingConfig(c->d.asBytes);

break;

case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K:

cmd_send(CMD_ACK,SampleLF(c->arg[0], c->arg[1]),0,0,0,0);

break;

case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K:

cmd_send(CMD_ACK,SampleLF(c->arg[0], c->arg[1]),0,0,0,0);

@@ -940,10 +1010,10 @@ void UsbPacketReceived(uint8_t *packet, int len)

cmd_send(CMD_ACK,SnoopLF(),0,0,0,0);

break;

case CMD_HID_DEMOD_FSK:

cmd_send(CMD_ACK,SnoopLF(),0,0,0,0);

break;

case CMD_HID_DEMOD_FSK:

- CmdHIDdemodFSK(c->arg[0], 0, 0, 1);

+ CmdHIDdemodFSK(c->arg[0], 0, 0, 0, 1);

break;

case CMD_HID_SIM_TAG:

break;

case CMD_HID_SIM_TAG:

- CmdHIDsimTAG(c->arg[0], c->arg[1], 1);

+ CmdHIDsimTAG(c->arg[0], c->arg[1], c->arg[2], 1);

break;

case CMD_FSK_SIM_TAG:

CmdFSKsimTAG(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);

break;

case CMD_FSK_SIM_TAG:

CmdFSKsimTAG(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);

@@ -955,7 +1025,11 @@ void UsbPacketReceived(uint8_t *packet, int len)

CmdPSKsimTag(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);

break;

case CMD_HID_CLONE_TAG:

CmdPSKsimTag(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);

break;

case CMD_HID_CLONE_TAG:

- CopyHIDtoT55x7(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);

+ CopyHIDtoT55x7(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0], 0x1D);

+ break;

+ case CMD_PARADOX_CLONE_TAG:

+ // Paradox cards are the same as HID, with a different preamble, so we can reuse the same function

+ CopyHIDtoT55x7(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0], 0x0F);

break;

case CMD_IO_DEMOD_FSK:

CmdIOdemodFSK(c->arg[0], 0, 0, 1);

break;

case CMD_IO_DEMOD_FSK:

CmdIOdemodFSK(c->arg[0], 0, 0, 1);

@@ -1007,12 +1081,18 @@ void UsbPacketReceived(uint8_t *packet, int len)

case CMD_PCF7931_WRITE:

WritePCF7931(c->d.asBytes[0],c->d.asBytes[1],c->d.asBytes[2],c->d.asBytes[3],c->d.asBytes[4],c->d.asBytes[5],c->d.asBytes[6], c->d.asBytes[9], c->d.asBytes[7]-128,c->d.asBytes[8]-128, c->arg[0], c->arg[1], c->arg[2]);

break;

case CMD_PCF7931_WRITE:

break;

+ case CMD_PCF7931_BRUTEFORCE:

+ BruteForcePCF7931(c->arg[0], (c->arg[1] & 0xFF), c->d.asBytes[9], c->d.asBytes[7]-128,c->d.asBytes[8]-128);

+ break;

case CMD_EM4X_READ_WORD:

EM4xReadWord(c->arg[0], c->arg[1],c->arg[2]);

break;

case CMD_EM4X_WRITE_WORD:

EM4xWriteWord(c->arg[0], c->arg[1], c->arg[2]);

break;

case CMD_EM4X_READ_WORD:

EM4xReadWord(c->arg[0], c->arg[1],c->arg[2]);

break;

case CMD_EM4X_WRITE_WORD:

EM4xWriteWord(c->arg[0], c->arg[1], c->arg[2]);

break;

+ case CMD_EM4X_PROTECT:

+ EM4xProtect(c->arg[0], c->arg[1], c->arg[2]);

+ break;

case CMD_AWID_DEMOD_FSK: // Set realtime AWID demodulation

CmdAWIDdemodFSK(c->arg[0], 0, 0, 1);

break;

case CMD_AWID_DEMOD_FSK: // Set realtime AWID demodulation

CmdAWIDdemodFSK(c->arg[0], 0, 0, 1);

break;

@@ -1038,10 +1118,13 @@ void UsbPacketReceived(uint8_t *packet, int len)

SimulateHitagSTag((bool)c->arg[0],(byte_t*)c->d.asBytes);

break;

case CMD_TEST_HITAGS_TRACES:// Tests every challenge within the given file

SimulateHitagSTag((bool)c->arg[0],(byte_t*)c->d.asBytes);

break;

case CMD_TEST_HITAGS_TRACES:// Tests every challenge within the given file

- check_challenges((bool)c->arg[0],(byte_t*)c->d.asBytes);

+ check_challenges_cmd((bool)c->arg[0], (byte_t*)c->d.asBytes, (uint8_t)c->arg[1]);

break;

case CMD_READ_HITAG_S://Reader for only Hitag S tags, args = key or challenge

break;

case CMD_READ_HITAG_S://Reader for only Hitag S tags, args = key or challenge

- ReadHitagS((hitag_function)c->arg[0],(hitag_data*)c->d.asBytes);

+ ReadHitagSCmd((hitag_function)c->arg[0], (hitag_data*)c->d.asBytes, (uint8_t)c->arg[1], (uint8_t)c->arg[2], false);

+ break;

+ case CMD_READ_HITAG_S_BLK:

+ ReadHitagSCmd((hitag_function)c->arg[0], (hitag_data*)c->d.asBytes, (uint8_t)c->arg[1], (uint8_t)c->arg[2], true);

break;

case CMD_WR_HITAG_S://writer for Hitag tags args=data to write,page and key or challenge

if ((hitag_function)c->arg[0] < 10) {

break;

case CMD_WR_HITAG_S://writer for Hitag tags args=data to write,page and key or challenge

if ((hitag_function)c->arg[0] < 10) {

@@ -1057,8 +1140,9 @@ void UsbPacketReceived(uint8_t *packet, int len)

case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693:

AcquireRawAdcSamplesIso15693();

break;

case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693:

AcquireRawAdcSamplesIso15693();

break;

- case CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693:

- RecordRawAdcSamplesIso15693();

+ case CMD_SNOOP_ISO_15693:

+ SnoopIso15693();

break;

case CMD_ISO_15693_COMMAND:

break;

case CMD_ISO_15693_COMMAND:

@@ -1076,14 +1160,19 @@ void UsbPacketReceived(uint8_t *packet, int len)

case CMD_READER_ISO_15693:

ReaderIso15693(c->arg[0]);

break;

case CMD_READER_ISO_15693:

ReaderIso15693(c->arg[0]);

break;

case CMD_SIMTAG_ISO_15693:

SimTagIso15693(c->arg[0], c->d.asBytes);

break;

case CMD_SIMTAG_ISO_15693:

SimTagIso15693(c->arg[0], c->d.asBytes);

break;

+ case CMD_CSETUID_ISO_15693:

+ SetTag15693Uid(c->d.asBytes);

+ break;

#endif

#ifdef WITH_LEGICRF

case CMD_SIMULATE_TAG_LEGIC_RF:

#endif

#ifdef WITH_LEGICRF

case CMD_SIMULATE_TAG_LEGIC_RF:

- LegicRfSimulate(c->arg[0], c->arg[1], c->arg[2]);

+ LegicRfSimulate(c->arg[0]);

break;

case CMD_WRITER_LEGIC_RF:

break;

case CMD_WRITER_LEGIC_RF:

@@ -1155,6 +1244,9 @@ void UsbPacketReceived(uint8_t *packet, int len)

case CMD_MIFARE_WRITEBL:

MifareWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);

break;

case CMD_MIFARE_WRITEBL:

MifareWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);

break;

+ case CMD_MIFARE_PERSONALIZE_UID:

+ MifarePersonalizeUID(c->arg[0], c->arg[1], c->d.asBytes);

+ break;

//case CMD_MIFAREU_WRITEBL_COMPAT:

//MifareUWriteBlockCompat(c->arg[0], c->d.asBytes);

//break;

//case CMD_MIFAREU_WRITEBL_COMPAT:

//MifareUWriteBlockCompat(c->arg[0], c->d.asBytes);

//break;

@@ -1171,7 +1263,7 @@ void UsbPacketReceived(uint8_t *packet, int len)

MifareChkKeys(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);

break;

case CMD_SIMULATE_MIFARE_CARD:

MifareChkKeys(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);

break;

case CMD_SIMULATE_MIFARE_CARD:

- Mifare1ksim(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);

+ MifareSim(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);

break;

// emulator

break;

// emulator

@@ -1232,9 +1324,6 @@ void UsbPacketReceived(uint8_t *packet, int len)

case CMD_ICLASS_WRITEBLOCK:

iClass_WriteBlock(c->arg[0], c->d.asBytes);

break;

case CMD_ICLASS_WRITEBLOCK:

iClass_WriteBlock(c->arg[0], c->d.asBytes);

break;

- case CMD_ICLASS_READCHECK: // auth step 1

- iClass_ReadCheck(c->arg[0], c->arg[1]);

- break;

case CMD_ICLASS_READBLOCK:

iClass_ReadBlk(c->arg[0]);

break;

case CMD_ICLASS_READBLOCK:

iClass_ReadBlk(c->arg[0]);

break;

@@ -1248,10 +1337,40 @@ void UsbPacketReceived(uint8_t *packet, int len)

iClass_Clone(c->arg[0], c->arg[1], c->d.asBytes);

break;

#endif

iClass_Clone(c->arg[0], c->arg[1], c->d.asBytes);

break;

#endif

#ifdef WITH_HFSNOOP

case CMD_HF_SNIFFER:

HfSnoop(c->arg[0], c->arg[1]);

break;

#ifdef WITH_HFSNOOP

case CMD_HF_SNIFFER:

HfSnoop(c->arg[0], c->arg[1]);

break;

+ case CMD_HF_PLOT:

+ HfPlot();

+ break;

+#endif

+#ifdef WITH_SMARTCARD

+ case CMD_SMART_ATR: {

+ SmartCardAtr();

+ break;

+ }

+ case CMD_SMART_SETCLOCK:{

+ SmartCardSetClock(c->arg[0]);

+ break;

+ }

+ case CMD_SMART_RAW: {

+ SmartCardRaw(c->arg[0], c->arg[1], c->d.asBytes);

+ break;

+ }

+ case CMD_SMART_UPLOAD: {

+ // upload file from client

+ uint8_t *mem = BigBuf_get_addr();

+ memcpy( mem + c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE);

+ cmd_send(CMD_ACK,1,0,0,0,0);

+ break;

+ }

+ case CMD_SMART_UPGRADE: {

+ SmartCardUpgrade(c->arg[0]);

+ break;

+ }

#endif

case CMD_BUFF_CLEAR:

#endif

case CMD_BUFF_CLEAR:

@@ -1277,7 +1396,6 @@ void UsbPacketReceived(uint8_t *packet, int len)

break;

case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K:

break;

case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K:

LED_B_ON();

uint8_t *BigBuf = BigBuf_get_addr();

for(size_t i=0; i<c->arg[1]; i += USB_CMD_DATA_SIZE) {

LED_B_ON();

uint8_t *BigBuf = BigBuf_get_addr();

for(size_t i=0; i<c->arg[1]; i += USB_CMD_DATA_SIZE) {

@@ -1384,13 +1502,10 @@ void __attribute__((noreturn)) AppMain(void)

}

common_area.flags.osimage_present = 1;

}

common_area.flags.osimage_present = 1;

- LED_D_OFF();

- LED_C_OFF();

- LED_B_OFF();

- LED_A_OFF();

+ LEDsoff();

// Init USB device

- usb_enable();

+ usb_enable();

// The FPGA gets its clock from us from PCK0 output, so set that up.

AT91C_BASE_PIOA->PIO_BSR = GPIO_PCK0;

// The FPGA gets its clock from us from PCK0 output, so set that up.

AT91C_BASE_PIOA->PIO_BSR = GPIO_PCK0;

@@ -1428,7 +1543,7 @@ void __attribute__((noreturn)) AppMain(void)

}

WDT_HIT();

}

WDT_HIT();

-#ifdef WITH_LF

+#ifdef WITH_LF_StandAlone

#ifndef WITH_ISO14443a_StandAlone

if (BUTTON_HELD(1000) > 0)

SamyRun();

#ifndef WITH_ISO14443a_StandAlone

if (BUTTON_HELD(1000) > 0)

SamyRun();