// own protocol.
//-----------------------------------------------------------------------------
-#ifndef __USB_CMD_H
-#define __USB_CMD_H
+#ifndef USB_CMD_H__
+#define USB_CMD_H__
+
#ifdef _MSC_VER
typedef DWORD uint32_t;
typedef BYTE uint8_t;
#define PACKED
-// stuff
#else
#include <stdint.h>
#include <stdbool.h>
#define USB_CMD_DATA_SIZE 512
+// the packets sent from client to PM3
typedef struct {
- uint64_t cmd;
- uint64_t arg[3];
- union {
- uint8_t asBytes[USB_CMD_DATA_SIZE];
- uint32_t asDwords[USB_CMD_DATA_SIZE/4];
- } d;
+ uint64_t cmd;
+ uint64_t arg[3];
+ union {
+ uint8_t asBytes[USB_CMD_DATA_SIZE];
+ uint32_t asDwords[USB_CMD_DATA_SIZE/4];
+ } d;
} PACKED UsbCommand;
+// the packets sent from PM3 to client (a smaller version of UsbCommand)
+typedef struct {
+ uint16_t cmd;
+ uint16_t datalen;
+ uint32_t arg[3];
+ union {
+ uint8_t asBytes[USB_CMD_DATA_SIZE];
+ uint32_t asDwords[USB_CMD_DATA_SIZE/4];
+ } d;
+} PACKED UsbResponse;
+
// A struct used to send sample-configs over USB
-typedef struct{
+typedef struct {
uint8_t decimation;
uint8_t bits_per_sample;
bool averaging;
int samples_to_skip;
} sample_config;
+
// For the bootloader
#define CMD_DEVICE_INFO 0x0000
#define CMD_SETUP_WRITE 0x0001
#define CMD_SNOOP_ICLASS 0x0392
#define CMD_SIMULATE_TAG_ICLASS 0x0393
#define CMD_READER_ICLASS 0x0394
-#define CMD_READER_ICLASS_REPLAY 0x0395
#define CMD_ICLASS_READBLOCK 0x0396
#define CMD_ICLASS_WRITEBLOCK 0x0397
#define CMD_ICLASS_EML_MEMSET 0x0398
#define CMD_ICLASS_CHECK 0x0399
-#define CMD_ICLASS_READCHECK 0x039A
+#define CMD_ICLASS_READCHECK 0x039A
// For measurements of the antenna tuning
#define CMD_MEASURE_ANTENNA_TUNING 0x0400
#define CMD_MIFAREU_WRITEBL 0x0722
#define CMD_MIFAREU_WRITEBL_COMPAT 0x0723
#define CMD_MIFAREUC_AUTH 0x0724
-//0x0725 and 0x0726 no longer used
+//0x0725 and 0x0726 no longer used
#define CMD_MIFAREUC_SETPWD 0x0727
#define CMD_HF_SNIFFER 0x0800
#define CMD_HF_PLOT 0x0801
+#define CMD_VARIABLE_SIZE_FLAG 0x8000
#define CMD_UNKNOWN 0xFFFF
// Mifare simulation flags
-#define FLAG_INTERACTIVE (1<<0)
-#define FLAG_4B_UID_IN_DATA (1<<1)
-#define FLAG_7B_UID_IN_DATA (1<<2)
-#define FLAG_NR_AR_ATTACK (1<<4)
-#define FLAG_RANDOM_NONCE (1<<5)
+#define FLAG_INTERACTIVE (1<<0)
+#define FLAG_4B_UID_IN_DATA (1<<1)
+#define FLAG_7B_UID_IN_DATA (1<<2)
+#define FLAG_NR_AR_ATTACK (1<<4)
+#define FLAG_RANDOM_NONCE (1<<5)
// iCLASS reader flags
// CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
/* Whether a bootloader that understands the common_area is present */
-#define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
+#define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
/* Whether a osimage that understands the common_area is present */
-#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
+#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
/* Set if the bootloader is currently executing */
-#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
+#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
/* Set if the OS is currently executing */
-#define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
+#define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
/* Set if this device understands the extend start flash command */
-#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
+#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
/* CMD_START_FLASH may have three arguments: start of area to flash,
end of area to flash, optional magic.