parityWd = (parityWd << 1) | BitStream[startIdx+word+bit];
BitStream[j++] = (BitStream[startIdx+word+bit]);
}
- if (word+pLen >= bLen) break;
+ if (word+pLen > bLen) break;
j--; // overwrite parity with next data
// if parity fails then return 0
//search for given preamble in given BitStream and return success=1 or fail=0 and startIndex and length
uint8_t preambleSearch(uint8_t *BitStream, uint8_t *preamble, size_t pLen, size_t *size, size_t *startIdx)
{
+ return (preambleSearchEx(BitStream, preamble, pLen, size, startIdx, false)) ? 1 : 0;
+}
+
+// search for given preamble in given BitStream and return success=1 or fail=0 and startIndex (where it was found) and length if not fineone
+// fineone does not look for a repeating preamble for em4x05/4x69 sends preamble once, so look for it once in the first pLen bits
+bool preambleSearchEx(uint8_t *BitStream, uint8_t *preamble, size_t pLen, size_t *size, size_t *startIdx, bool findone) {
// Sanity check. If preamble length is bigger than bitstream length.
- if ( *size <= pLen ) return 0;
+ if ( *size <= pLen ) return false;
- uint8_t foundCnt=0;
- for (int idx=0; idx < *size - pLen; idx++){
- if (memcmp(BitStream+idx, preamble, pLen) == 0){
+ uint8_t foundCnt = 0;
+ for (size_t idx = 0; idx < *size - pLen; idx++) {
+ if (memcmp(BitStream+idx, preamble, pLen) == 0) {
//first index found
foundCnt++;
- if (foundCnt == 1){
+ if (foundCnt == 1) {
+ if (g_debugMode) prnt("DEBUG: preamble found at %u", idx);
*startIdx = idx;
- }
- if (foundCnt == 2){
+ if (findone) return true;
+ } else if (foundCnt == 2) {
*size = idx - *startIdx;
- return 1;
+ return true;
}
}
}
- return 0;
+ return false;
}
-// search for given preamble in given BitStream and return success=1 or fail=0 and startIndex (where it was found)
-// does not look for a repeating preamble
-// em4x05/4x69 only sends preamble once, so look for it once in the first pLen bits
-// leave it generic so it could be reused later...
-bool onePreambleSearch(uint8_t *BitStream, uint8_t *preamble, size_t pLen, size_t size, size_t *startIdx) {
- // Sanity check. If preamble length is bigger than bitstream length.
- if ( size <= pLen ) return false;
- for (size_t idx = 0; idx < size - pLen; idx++) {
- if (memcmp(BitStream+idx, preamble, pLen) == 0) {
- if (g_debugMode) prnt("DEBUG: preamble found at %u", idx);
- *startIdx = idx;
- return true;
+// find start of modulating data (for fsk and psk) in case of beginning noise or slow chip startup.
+size_t findModStart(uint8_t dest[], size_t size, uint8_t threshold_value, uint8_t expWaveSize) {
+ size_t i = 0;
+ size_t waveSizeCnt = 0;
+ uint8_t thresholdCnt = 0;
+ bool isAboveThreshold = dest[i++] >= threshold_value;
+ for (; i < size-20; i++ ) {
+ if(dest[i] < threshold_value && isAboveThreshold) {
+ thresholdCnt++;
+ if (thresholdCnt > 2 && waveSizeCnt < expWaveSize+1) break;
+ isAboveThreshold = false;
+ waveSizeCnt = 0;
+ } else if (dest[i] >= threshold_value && !isAboveThreshold) {
+ thresholdCnt++;
+ if (thresholdCnt > 2 && waveSizeCnt < expWaveSize+1) break;
+ isAboveThreshold = true;
+ waveSizeCnt = 0;
+ } else {
+ waveSizeCnt++;
}
+ if (thresholdCnt > 10) break;
}
- return false;
+ if (g_debugMode == 2) prnt("DEBUG: threshold Count reached at %u, count: %u",i, thresholdCnt);
+ return i;
}
//by marshmellow
//takes 1s and 0s and searches for EM410x format - output EM ID
uint8_t Em410xDecode(uint8_t *BitStream, size_t *size, size_t *startIdx, uint32_t *hi, uint64_t *lo)
{
- //no arguments needed - built this way in case we want this to be a direct call from "data " cmds in the future
- // otherwise could be a void with no arguments
- //set defaults
- uint32_t i = 0;
+ //sanity checks
+ if (*size < 64) return 0;
if (BitStream[1]>1) return 0; //allow only 1s and 0s
// 111111111 bit pattern represent start of frame
// include 0 in front to help get start pos
uint8_t preamble[] = {0,1,1,1,1,1,1,1,1,1};
- uint32_t idx = 0;
- uint32_t parityBits = 0;
uint8_t errChk = 0;
- uint8_t FmtLen = 10;
+ uint8_t FmtLen = 10; // sets of 4 bits = end data
*startIdx = 0;
errChk = preambleSearch(BitStream, preamble, sizeof(preamble), size, startIdx);
- if (errChk == 0 || *size < 64) return 0;
- if (*size > 64) FmtLen = 22;
- *startIdx += 1; //get rid of 0 from preamble
- idx = *startIdx + 9;
- for (i=0; i<FmtLen; i++){ //loop through 10 or 22 sets of 5 bits (50-10p = 40 bits or 88 bits)
- parityBits = bytebits_to_byte(BitStream+(i*5)+idx,5);
- //check even parity - quit if failed
- if (parityTest(parityBits, 5, 0) == 0) return 0;
- //set uint64 with ID from BitStream
- for (uint8_t ii=0; ii<4; ii++){
- *hi = (*hi << 1) | (*lo >> 63);
- *lo = (*lo << 1) | (BitStream[(i*5)+ii+idx]);
- }
+ if ( errChk == 0 || (*size != 64 && *size != 128) ) return 0;
+ if (*size == 128) FmtLen = 22; // 22 sets of 4 bits
+
+ //skip last 4bit parity row for simplicity
+ *size = removeParity(BitStream, *startIdx + sizeof(preamble), 5, 0, FmtLen * 5);
+ if (*size == 40) { // std em410x format
+ *hi = 0;
+ *lo = ((uint64_t)(bytebits_to_byte(BitStream, 8)) << 32) | (bytebits_to_byte(BitStream + 8, 32));
+ } else if (*size == 88) { // long em format
+ *hi = (bytebits_to_byte(BitStream, 24));
+ *lo = ((uint64_t)(bytebits_to_byte(BitStream + 24, 32)) << 32) | (bytebits_to_byte(BitStream + 24 + 32, 32));
+ } else {
+ return 0;
}
- if (errChk != 0) return 1;
- //skip last 5 bit parity test for simplicity.
- // *size = 64 | 128;
- return 0;
+ return 1;
}
//by marshmellow
}
//by marshmellow
+//amplify based on ask edge detection
void askAmp(uint8_t *BitStream, size_t size)
{
uint8_t Last = 128;
{
size_t last_transition = 0;
size_t idx = 1;
- //uint32_t maxVal=0;
if (fchigh==0) fchigh=10;
if (fclow==0) fclow=8;
//set the threshold close to 0 (graph) or 128 std to avoid static
size_t currSample = 0;
if ( size < 1024 ) return 0; // not enough samples
- // jump to modulating data by finding the first 4 threshold crossings (or first 2 waves)
- // in case you have junk or noise at the beginning of the trace...
- uint8_t thresholdCnt = 0;
- size_t waveSizeCnt = 0;
- bool isAboveThreshold = dest[idx++] >= threshold_value;
- for (; idx < size-20; idx++ ) {
- if(dest[idx] < threshold_value && isAboveThreshold) {
- thresholdCnt++;
- if (thresholdCnt > 2 && waveSizeCnt < fchigh+1) break;
- isAboveThreshold = false;
- waveSizeCnt = 0;
- } else if (dest[idx] >= threshold_value && !isAboveThreshold) {
- thresholdCnt++;
- if (thresholdCnt > 2 && waveSizeCnt < fchigh+1) break;
- isAboveThreshold = true;
- waveSizeCnt = 0;
- } else {
- waveSizeCnt++;
- }
- if (thresholdCnt > 10) break;
- }
- if (g_debugMode == 2) prnt("threshold Count reached at %u",idx);
+ //find start of modulating data in trace
+ idx = findModStart(dest, size, threshold_value, fchigh);
// Need to threshold first sample
if(dest[idx] < threshold_value) dest[0] = 0;
continue;
// else new peak
// if we got less than the small fc + tolerance then set it to the small fc
- if (fcCounter < fcLow+fcTol)
+ // if it is inbetween set it to the last counter
+ if (fcCounter < fcHigh && fcCounter > fcLow)
+ fcCounter = lastFCcnt;
+ else if (fcCounter < fcLow+fcTol)
fcCounter = fcLow;
else //set it to the large fc
fcCounter = fcHigh;
}
}
- if (ii<0) return 0; // oops we went too far
+ if (ii<2) return 0; // oops we went too far
return clk[ii];
}
size_t numBits=0;
uint8_t curPhase = *invert;
size_t i=0, waveStart=1, waveEnd=0, firstFullWave=0, lastClkBit=0;
- uint8_t fc=0, fullWaveLen=0, tol=1;
- uint16_t errCnt=0, waveLenCnt=0;
- fc = countFC(dest, *size, 0);
+ uint16_t fc=0, fullWaveLen=0, tol=1;
+ uint16_t errCnt=0, waveLenCnt=0, errCnt2=0;
+ fc = countFC(dest, *size, 1);
+ uint8_t fc2 = fc >> 8;
+ if (fc2 == 10) return -1; //fsk found - quit
+ fc = fc & 0xFF;
if (fc!=2 && fc!=4 && fc!=8) return -1;
//PrintAndLog("DEBUG: FC: %d",fc);
*clock = DetectPSKClock(dest, *size, *clock);
if (*clock == 0) return -1;
- // jump to modulating data by finding the first 2 threshold crossings (or first 1 waves)
- // in case you have junk or noise at the beginning of the trace...
- uint8_t thresholdCnt = 0;
- size_t waveSizeCnt = 0;
- uint8_t threshold_value = 123; //-5
- bool isAboveThreshold = dest[i++] >= threshold_value;
- for (; i < *size-20; i++ ) {
- if(dest[i] < threshold_value && isAboveThreshold) {
- thresholdCnt++;
- if (thresholdCnt > 2 && waveSizeCnt < fc+1) break;
- isAboveThreshold = false;
- waveSizeCnt = 0;
- } else if (dest[i] >= threshold_value && !isAboveThreshold) {
- thresholdCnt++;
- if (thresholdCnt > 2 && waveSizeCnt < fc+1) break;
- isAboveThreshold = true;
- waveSizeCnt = 0;
- } else {
- waveSizeCnt++;
- }
- if (thresholdCnt > 10) break;
- }
- if (g_debugMode == 2) prnt("DEBUG PSK: threshold Count reached at %u, count: %u",i, thresholdCnt);
+ //find start of modulating data in trace
+ uint8_t threshold_value = 123; //-5
+ i = findModStart(dest, *size, threshold_value, fc);
- int avgWaveVal=0, lastAvgWaveVal=0;
- waveStart = i+1;
//find first phase shift
- for (; i<loopCnt; i++){
+ int avgWaveVal=0, lastAvgWaveVal=0;
+ waveStart = i;
+ for (; i<loopCnt; i++) {
+ // find peak
if (dest[i]+fc < dest[i+1] && dest[i+1] >= dest[i+2]){
waveEnd = i+1;
if (g_debugMode == 2) prnt("DEBUG PSK: waveEnd: %u, waveStart: %u",waveEnd, waveStart);
lastAvgWaveVal = avgWaveVal/(waveLenCnt);
firstFullWave = waveStart;
fullWaveLen=waveLenCnt;
- //if average wave value is > graph 0 then it is an up wave or a 1
- if (lastAvgWaveVal > threshold_value) curPhase ^= 1; //fudge graph 0 a little 123 vs 128
+ //if average wave value is > graph 0 then it is an up wave or a 1 (could cause inverting)
+ if (lastAvgWaveVal > threshold_value) curPhase ^= 1;
break;
}
waveStart = i+1;
//set start of wave as clock align
lastClkBit = firstFullWave;
if (g_debugMode==2) prnt("DEBUG PSK: firstFullWave: %u, waveLen: %u",firstFullWave,fullWaveLen);
- if (g_debugMode==2) prnt("DEBUG: clk: %d, lastClkBit: %u, fc: %u", *clock, lastClkBit,(unsigned int) fc);
+ if (g_debugMode==2) prnt("DEBUG PSK: clk: %d, lastClkBit: %u, fc: %u", *clock, lastClkBit,(unsigned int) fc);
waveStart = 0;
dest[numBits++] = curPhase; //set first read bit
for (i = firstFullWave + fullWaveLen - 1; i < *size-3; i++){
} else if (i+1 > lastClkBit + *clock + tol + fc){
lastClkBit += *clock; //no phase shift but clock bit
dest[numBits++] = curPhase;
+ } else if (waveLenCnt < fc - 1) { //wave is smaller than field clock (shouldn't happen often)
+ errCnt2++;
+ if(errCnt2 > 101) return errCnt2;
}
avgWaveVal = 0;
waveStart = i+1;
return errCnt;
}
+bool DetectST(uint8_t buffer[], size_t *size, int *foundclock) {
+ size_t ststart = 0, stend = 0;
+ return DetectST_ext(buffer, size, foundclock, &ststart, &stend);
+}
+
//by marshmellow
//attempt to identify a Sequence Terminator in ASK modulated raw wave
-bool DetectST(uint8_t buffer[], size_t *size, int *foundclock) {
+bool DetectST_ext(uint8_t buffer[], size_t *size, int *foundclock, size_t *ststart, size_t *stend) {
size_t bufsize = *size;
//need to loop through all samples and identify our clock, look for the ST pattern
uint8_t fndClk[] = {8,16,32,40,50,64,128};
size_t newloc = 0;
i=0;
if (g_debugMode==2) prnt("DEBUG STT: Starting STT trim - start: %d, datalen: %d ",dataloc, datalen);
-
+ bool firstrun = true;
// warning - overwriting buffer given with raw wave data with ST removed...
while ( dataloc < bufsize-(clk/2) ) {
//compensate for long high at end of ST not being high due to signal loss... (and we cut out the start of wave high part)
for(i=0; i < clk/2-tol; ++i) {
buffer[dataloc+i] = high+5;
}
+ } //test for single sample outlier (high between two lows) in the case of very strong waves
+ if (buffer[dataloc] >= high && buffer[dataloc+2] <= low) {
+ buffer[dataloc] = buffer[dataloc+2];
+ buffer[dataloc+1] = buffer[dataloc+2];
+ }
+ if (firstrun) {
+ *stend = dataloc;
+ *ststart = dataloc-(clk*4);
+ firstrun=false;
}
for (i=0; i<datalen; ++i) {
if (i+newloc < bufsize) {
projects / proxmark3-svn / blobdiff