compatibility fix: get_clocktime() is not always available

[proxmark3-svn] / common / protocols.h

diff --git a/common/protocols.h b/common/protocols.h
index 57e6011f595a25279e21700de3998ede088d6d21..37a88449c5df1eba23d28c7d9ac9967c02746286 100644 (file)
--- a/common/protocols.h
+++ b/common/protocols.h
@@ -1,6 +1,9 @@
 #ifndef PROTOCOLS_H
 #define PROTOCOLS_H
 
 #ifndef PROTOCOLS_H
 #define PROTOCOLS_H
 

+#include <stdint.h>
+
+

 //The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
 /*
 ISO14443A (usually NFC tags)
 //The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
 /*
 ISO14443A (usually NFC tags)


@@ -96,7 +99,8 @@ NXP/Philips CUSTOM COMMANDS
 #define ICLASS_CMD_PAGESEL          0x84
 #define ICLASS_CMD_READCHECK_KD     0x88
 #define ICLASS_CMD_READCHECK_KC     0x18
 #define ICLASS_CMD_PAGESEL          0x84
 #define ICLASS_CMD_READCHECK_KD     0x88
 #define ICLASS_CMD_READCHECK_KC     0x18

-#define ICLASS_CMD_CHECK            0x05
+#define ICLASS_CMD_CHECK_KC         0x95
+#define ICLASS_CMD_CHECK_KD         0x05

 #define ICLASS_CMD_DETECT           0x0F
 #define ICLASS_CMD_HALT             0x00
 #define ICLASS_CMD_UPDATE           0x87
 #define ICLASS_CMD_DETECT           0x0F
 #define ICLASS_CMD_HALT             0x00
 #define ICLASS_CMD_UPDATE           0x87


@@ -105,44 +109,53 @@ NXP/Philips CUSTOM COMMANDS
 
 
 #define ISO14443A_CMD_REQA       0x26
 
 
 #define ISO14443A_CMD_REQA       0x26

-#define ISO14443A_CMD_READBLOCK  0x30

 #define ISO14443A_CMD_WUPA       0x52
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT     0x93
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2   0x95
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_3   0x97
 #define ISO14443A_CMD_WUPA       0x52
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT     0x93
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2   0x95
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_3   0x97

-#define ISO14443A_CMD_WRITEBLOCK 0xA0 // or 0xA2 ?

 #define ISO14443A_CMD_HALT       0x50
 #define ISO14443A_CMD_RATS       0xE0
 
 #define ISO14443A_CMD_HALT       0x50
 #define ISO14443A_CMD_RATS       0xE0
 

-#define MIFARE_AUTH_KEYA        0x60
-#define MIFARE_AUTH_KEYB        0x61
-#define MIFARE_MAGICWUPC1       0x40
-#define MIFARE_MAGICWUPC2       0x43
-#define MIFARE_MAGICWIPEC       0x41
-#define MIFARE_CMD_INC          0xC0
-#define MIFARE_CMD_DEC          0xC1
-#define MIFARE_CMD_RESTORE      0xC2
-#define MIFARE_CMD_TRANSFER     0xB0
-
-#define MIFARE_EV1_PERSONAL_UID 0x40
-#define MIFARE_EV1_SETMODE      0x43
-
-
-#define MIFARE_ULC_WRITE        0xA2
-//#define MIFARE_ULC__COMP_WRITE  0xA0
-#define MIFARE_ULC_AUTH_1       0x1A
-#define MIFARE_ULC_AUTH_2       0xAF
-
-#define MIFARE_ULEV1_AUTH       0x1B
-#define MIFARE_ULEV1_VERSION    0x60
-#define MIFARE_ULEV1_FASTREAD   0x3A
-//#define MIFARE_ULEV1_WRITE      0xA2
-//#define MIFARE_ULEV1_COMP_WRITE 0xA0
-#define MIFARE_ULEV1_READ_CNT   0x39
-#define MIFARE_ULEV1_INCR_CNT   0xA5
-#define MIFARE_ULEV1_READSIG    0x3C
-#define MIFARE_ULEV1_CHECKTEAR  0x3E
-#define MIFARE_ULEV1_VCSL       0x4B
+#define MIFARE_CMD_READBLOCK     0x30
+#define MIFARE_CMD_WRITEBLOCK    0xA0
+#define MIFARE_AUTH_KEYA         0x60
+#define MIFARE_AUTH_KEYB         0x61
+#define MIFARE_MAGICWUPC1        0x40
+#define MIFARE_MAGICWUPC2        0x43
+#define MIFARE_MAGICWIPEC        0x41
+#define MIFARE_CMD_INC           0xC0
+#define MIFARE_CMD_DEC           0xC1
+#define MIFARE_CMD_RESTORE       0xC2
+#define MIFARE_CMD_TRANSFER      0xB0
+
+#define MIFARE_EV1_PERSONAL_UID  0x40
+#define MIFARE_EV1_UIDF0         0x00
+#define MIFARE_EV1_UIDF1         0x40
+#define MIFARE_EV1_UIDF2         0x20
+#define MIFARE_EV1_UIDF3         0x60
+#define MIFARE_EV1_SETMODE       0x43
+
+#define MIFARE_ULC_WRITE         0xA2
+#define MIFARE_ULC_COMP_WRITE    MIFARE_CMD_WRITEBLOCK
+#define MIFARE_ULC_AUTH_1        0x1A
+#define MIFARE_ULC_AUTH_2        0xAF
+
+#define MIFARE_ULEV1_AUTH        0x1B
+#define MIFARE_ULEV1_VERSION     0x60
+#define MIFARE_ULEV1_FASTREAD    0x3A
+#define MIFARE_ULEV1_WRITE       0xA2
+#define MIFARE_ULEV1_COMP_WRITE  MIFARE_CMD_WRITEBLOCK
+#define MIFARE_ULEV1_READ_CNT    0x39
+#define MIFARE_ULEV1_INCR_CNT    0xA5
+#define MIFARE_ULEV1_READSIG     0x3C
+#define MIFARE_ULEV1_CHECKTEAR   0x3E
+#define MIFARE_ULEV1_VCSL        0x4B
+
+// mifare 4bit card answers
+#define CARD_ACK                 0x0A  // 1010 - ACK
+#define CARD_NACK_NA             0x04  // 0100 - NACK, not allowed (command not allowed)
+#define CARD_NACK_TR             0x05  // 0101 - NACK, transmission error
+

 
 /**
 06 00 = INITIATE
 
 /**
 06 00 = INITIATE


@@ -167,22 +180,51 @@ NXP/Philips CUSTOM COMMANDS
 #define ISO14443B_COMPLETION   0x0F
 #define ISO14443B_AUTHENTICATE 0x0A
 
 #define ISO14443B_COMPLETION   0x0F
 #define ISO14443B_AUTHENTICATE 0x0A
 

-//First byte is 26
-#define ISO15693_INVENTORY     0x01
-#define ISO15693_STAYQUIET     0x02
-//First byte is 02
-#define ISO15693_READBLOCK            0x20
-#define ISO15693_WRITEBLOCK           0x21
-#define ISO15693_LOCKBLOCK            0x22
-#define ISO15693_READ_MULTI_BLOCK     0x23
-#define ISO15693_SELECT               0x25
-#define ISO15693_RESET_TO_READY       0x26
-#define ISO15693_WRITE_AFI            0x27
-#define ISO15693_LOCK_AFI             0x28
-#define ISO15693_WRITE_DSFID          0x29
-#define ISO15693_LOCK_DSFID           0x2A
-#define ISO15693_GET_SYSTEM_INFO      0x2B
-#define ISO15693_READ_MULTI_SECSTATUS 0x2C
+// ISO15693 COMMANDS
+#define ISO15693_INVENTORY                   0x01
+#define ISO15693_STAYQUIET                   0x02
+#define ISO15693_READBLOCK                   0x20
+#define ISO15693_WRITEBLOCK                  0x21
+#define ISO15693_LOCKBLOCK                   0x22
+#define ISO15693_READ_MULTI_BLOCK            0x23
+#define ISO15693_WRITE_MULTI_BLOCK           0x24
+#define ISO15693_SELECT                      0x25
+#define ISO15693_RESET_TO_READY              0x26
+#define ISO15693_WRITE_AFI                   0x27
+#define ISO15693_LOCK_AFI                    0x28
+#define ISO15693_WRITE_DSFID                 0x29
+#define ISO15693_LOCK_DSFID                  0x2A
+#define ISO15693_GET_SYSTEM_INFO             0x2B
+#define ISO15693_READ_MULTI_SECSTATUS        0x2C
+
+// ISO15693 REQUEST FLAGS
+#define ISO15693_REQ_SUBCARRIER_TWO          (1<<0)
+#define ISO15693_REQ_DATARATE_HIGH           (1<<1)
+#define ISO15693_REQ_INVENTORY               (1<<2)
+#define ISO15693_REQ_PROTOCOL_EXT            (1<<3) // RFU
+#define ISO15693_REQ_OPTION                  (1<<6) // Command specific option selector
+// when REQ_INVENTORY is not set
+#define ISO15693_REQ_SELECT                  (1<<4) // only selected cards response
+#define ISO15693_REQ_ADDRESS                 (1<<5) // this req contains an address
+// when REQ_INVENTORY is set
+#define ISO15693_REQINV_AFI                  (1<<4) // AFI Field is present
+#define ISO15693_REQINV_SLOT1                (1<<5) // 1 Slot     (16 slots if not set)
+
+// ISO15693 RESPONSE FLAGS
+#define ISO15693_RES_ERROR                   (1<<0)
+#define ISO15693_RES_EXT                     (1<<3) // Protocol Extention      
+
+// ISO15693 RESPONSE ERROR CODES
+#define ISO15693_NOERROR                     0x00
+#define ISO15693_ERROR_CMD_NOT_SUP           0x01 // Command not supported
+#define ISO15693_ERROR_CMD_NOT_REC           0x02 // Command not recognized (eg. parameter error)
+#define ISO15693_ERROR_CMD_OPTION            0x03 // Command option not supported
+#define ISO15693_ERROR_GENERIC               0x0F // No additional Info about this error
+#define ISO15693_ERROR_BLOCK_UNAVAILABLE     0x10
+#define ISO15693_ERROR_BLOCK_LOCKED_ALREADY  0x11 // cannot lock again
+#define ISO15693_ERROR_BLOCK_LOCKED          0x12 // cannot be changed
+#define ISO15693_ERROR_BLOCK_WRITE           0x13 // Writing was unsuccessful
+#define ISO15693_ERROR_BLOCL_WRITELOCK       0x14 // Locking was unsuccessful

 
 
 // Topaz command set:
 
 
 // Topaz command set:


@@ -199,12 +241,36 @@ NXP/Philips CUSTOM COMMANDS
 #define TOPAZ_WRITE_E8                                 0x54    // Write-with-erase (eight bytes)
 #define TOPAZ_WRITE_NE8                                        0x1B    // Write-no-erase (eight bytes)
 
 #define TOPAZ_WRITE_E8                                 0x54    // Write-with-erase (eight bytes)
 #define TOPAZ_WRITE_NE8                                        0x1B    // Write-no-erase (eight bytes)
 

+// HITAG1 commands
+#define HITAG1_SET_CCNEW                0xC2    // left 5 bits only
+#define HITAG1_READ_ID                  0x00    // not a real command, consists of 5 bits length, <length> bits partial SN, 8 bits CRC
+#define HITAG1_SELECT                   0x00    // left 5 bits only, followed by 32 bits SN and 8 bits CRC
+#define HITAG1_WRPPAGE                  0x80    // left 4 bits only, followed by 8 bits page and 8 bits CRC
+#define HITAG1_WRPBLK                   0x90    // left 4 bits only, followed by 8 bits block and 8 bits CRC
+#define HITAG1_WRCPAGE                  0xA0    // left 4 bits only, followed by 8 bits page or key information and 8 bits CRC
+#define HITAG1_WRCBLK                   0xB0    // left 4 bits only, followed by 8 bits block and 8 bits CRC
+#define HITAG1_RDPPAGE                  0xC0    // left 4 bits only, followed by 8 bits page and 8 bits CRC
+#define HITAG1_RDPBLK                   0xD0    // left 4 bits only, followed by 8 bits block and 8 bits CRC
+#define HITAG1_RDCPAGE                  0xE0    // left 4 bits only, followed by 8 bits page and 8 bits CRC
+#define HITAG1_RDCBLK                   0xF0    // left 4 bits only, followed by 8 bits block and 8 bits CRC
+#define HITAG1_HALT                     0x70    // left 4 bits only, followed by 8 bits (dummy) page and 8 bits CRC
+
+// HITAG2 commands
+#define HITAG2_START_AUTH               0xC0    // left 5 bits only
+#define HITAG2_READ_PAGE                0xC0    // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits
+#define HITAG2_READ_PAGE_INVERTED       0x44    // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits
+#define HITAG2_WRITE_PAGE               0x82    // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits
+#define HITAG2_HALT                     0x00    // left 5 bits only
+
+#define ISO_14443A    0
+#define ICLASS        1
+#define ISO_14443B    2
+#define TOPAZ         3
+#define PROTO_MIFARE  4
+#define ISO_7816_4    5
+#define ISO_15693     6
+#define ISO_14443_4   7

 
 

-#define ISO_14443A             0
-#define ICLASS                 1
-#define ISO_14443B             2
-#define TOPAZ                  3
-#define PROTO_MIFARE   4

 
 //-- Picopass fuses
 #define FUSE_FPERS   0x80
 
 //-- Picopass fuses
 #define FUSE_FPERS   0x80


@@ -216,8 +282,31 @@ NXP/Philips CUSTOM COMMANDS
 #define FUSE_FPROD0  0x02
 #define FUSE_RA      0x01
 
 #define FUSE_FPROD0  0x02
 #define FUSE_RA      0x01
 

-void printIclassDumpInfo(uint8_t* iclass_dump);
-void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb);
+// ISO 7816-4 Basic interindustry commands. For command APDU's.
+#define ISO7816_ERASE_BINARY             0x0E
+#define ISO7816_VERIFY                   0x20
+#define ISO7816_MANAGE_CHANNEL           0x70
+#define ISO7816_EXTERNAL_AUTHENTICATE    0x82
+#define ISO7816_GET_CHALLENGE            0x84
+#define ISO7816_INTERNAL_AUTHENTICATE    0x88
+#define ISO7816_SELECT_FILE              0xA4
+#define ISO7816_GET_PROCESSING_OPTIONS   0xA8
+#define ISO7816_READ_BINARY              0xB0
+#define ISO7816_READ_RECORDS             0xB2
+#define ISO7816_GET_RESPONSE             0xC0
+#define ISO7816_ENVELOPE                 0xC2
+#define ISO7816_GET_DATA                 0xCA
+#define ISO7816_WRITE_BINARY             0xD0
+#define ISO7816_WRITE_RECORD             0xD2
+#define ISO7816_UPDATE_BINARY            0xD6
+#define ISO7816_PUT_DATA                 0xDA
+#define ISO7816_UPDATE_DATA              0xDC
+#define ISO7816_APPEND_RECORD            0xE2
+// ISO7816-4   For response APDU's
+#define ISO7816_OK                       0x9000
+//     6x xx = ERROR
+#define ISO7816_MAX_FRAME_SIZE           261
+

 
 /* T55x7 configuration register definitions */
 #define T55x7_POR_DELAY             0x00000001
 
 /* T55x7 configuration register definitions */
 #define T55x7_POR_DELAY             0x00000001