// Intializes random number generator
time_t t;
srand((unsigned) time(&t));
-
- uint8_t pre[96];
- memset(pre, 0x00, sizeof(pre));
-
- uint8_t index = 8;
+ //uint8_t xorKey = rand() % 0xFF;
+ uint8_t xorKey = 0x66;
+ uint8_t i;
- // preamble 6bits
- pre[0] = 1;
- pre[1] = 1;
- pre[2] = 1;
- pre[3] = 1;
- pre[4] = 1;
- //pre[5] = 0;
-
- // add xor key
- uint8_t xorKey = rand() % 0xFF;
- num_to_bytebits(xorKey, 8, pre+index);
- index += 8;
- // add format length
- // len | hex | bin wiegand pos fc/cn
- // 26 | 1A | 0001 1010
- num_to_bytebits(26, 8, pre+index);
- // 36 | 24 | 0010 0100
- //num_to_bytebits(36, 8, pre+index);
- // 40 | 28 | 0010 1000
- //num_to_bytebits(40, 8, pre+index);
+ uint8_t pre[96];
+ memset(pre, 0x00, sizeof(pre));
- index += 8;
-
- // 2bit checksum
- // unknown today.
- index += 2;
-
// Get 26 wiegand from FacilityCode, CardNumber
uint8_t wiegand[24];
memset(wiegand, 0x00, sizeof(wiegand));
num_to_bytebits(cn, 16, wiegand+8);
// add wiegand parity bits (dest, source, len)
- wiegand_add_parity(pre+index, wiegand, 24);
-
- uint8_t tmp = 0, i = 0;
- for (i = 2; i < 12; ++i) {
- // // xor all bytes
- // tmp = xorKey ^ bytebits_to_byte(pre + (i*8), 8);
-
- // // copy to out..
- // num_to_bytebits(tmp, 8, pre + (i*8) );
- }
+ wiegand_add_parity(pre, wiegand, 24);
- // add spacer bit 0 every 5
+ // lets start. 12bytes of data to be produced.
+ uint8_t rawbytes[12];
+ memset(rawbytes, 0x00, sizeof(rawbytes));
+
+ // xor key
+ rawbytes[0] = xorKey;
+
+ // add format length (decimal)
+ // len | hex | bin
+ // 26 | 1A | 0001 1010
+ rawbytes[1] = (26 << 2);
+ // 36 | 24 | 0010 0100
+ //rawbytes[1] = (36 << 2);
+ // 40 | 28 | 0010 1000
+ //rawbytes[1] = (40 << 2);
+
+ // 2bit checksum, unknown today,
+ // these two bits are the last ones of rawbyte[1], hence the LSHIFT above.
+ rawbytes[2] = 1;
+ rawbytes[3] = 0;
+
+ // add wiegand to rawbytes
+ for (i = 0; i < 4; ++i)
+ rawbytes[i+4] = bytebits_to_byte( pre + (i*8), 8);
+
+ if (g_debugMode) printf(" WIE | %s\n", sprint_hex(rawbytes, sizeof(rawbytes)));
- // swap nibbles
+ // XOR (only works on wiegand stuff)
+ for (i = 1; i < 12; ++i)
+ rawbytes[i] ^= xorKey ;
+ if (g_debugMode) printf(" XOR | %s \n", sprint_hex(rawbytes, sizeof(rawbytes)));
+
+ // convert rawbytes to bits in pre
+ for (i = 0; i < 12; ++i)
+ num_to_bytebitsLSBF( rawbytes[i], 8, pre + (i*8));
+
+ if (g_debugMode) printf("\n Raw | %s \n", sprint_hex(rawbytes, sizeof(rawbytes)));
+ if (g_debugMode) printf(" Raw | %s\n", sprint_bin(pre, 64) );
- // copy to outarray
- memcpy(guardBits, pre, sizeof(pre));
+ // add spacer bit 0 every 4 bits, starting with index 0,
+ // 12 bytes, 24 nibbles. 24+1 extra bites. 3bytes. ie 9bytes | 1byte xorkey, 8bytes rawdata (64bits, should be enough for a 40bit wiegand)
+ addParity(pre, guardBits+6, 64, 5, 3);
+
+ // preamble
+ guardBits[0] = 1;
+ guardBits[1] = 1;
+ guardBits[2] = 1;
+ guardBits[3] = 1;
+ guardBits[4] = 1;
+ guardBits[5] = 0;
- printf(" | %s\n", sprint_bin(guardBits, 96) );
+ if (g_debugMode) printf(" FIN | %s\n", sprint_bin(guardBits, 96) );
return 1;
}
uint32_t blocks[5] = {T55x7_MODULATION_BIPHASE | T55x7_BITRATE_RF_64 | 3<<T55x7_MAXBLOCK_SHIFT, 0, 0, 0, 0};
// if (param_getchar(Cmd, 3) == 'Q' || param_getchar(Cmd, 3) == 'q')
+ //t5555 (Q5) BITRATE = (RF-2)/2 (iceman)
// blocks[0] = T5555_MODULATION_FSK2 | 50<<T5555_BITRATE_SHIFT | 4<<T5555_MAXBLOCK_SHIFT;
if (sscanf(Cmd, "%u %u", &fc, &cn ) != 2) return usage_lf_guard_clone();
for ( i = 0; i<4; ++i )
PrintAndLog(" %02d | %08x", i, blocks[i]);
- // UsbCommand resp;
- // UsbCommand c = {CMD_T55XX_WRITE_BLOCK, {0,0,0}};
-
- // for ( i = 0; i<5; ++i ) {
- // c.arg[0] = blocks[i];
- // c.arg[1] = i;
- // clearCommandBuffer();
- // SendCommand(&c);
- // if (!WaitForResponseTimeout(CMD_ACK, &resp, 1000)){
- // PrintAndLog("Error occurred, device did not respond during write operation.");
- // return -1;
- // }
- // }
+ UsbCommand resp;
+ UsbCommand c = {CMD_T55XX_WRITE_BLOCK, {0,0,0}};
+
+ for ( i = 0; i<4; ++i ) {
+ c.arg[0] = blocks[i];
+ c.arg[1] = i;
+ clearCommandBuffer();
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1000)){
+ PrintAndLog("Error occurred, device did not respond during write operation.");
+ return -1;
+ }
+ }
return 0;
}
if (strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') return usage_lf_guard_sim();
uint32_t facilitycode = 0, cardnumber = 0, fc = 0, cn = 0;
+ uint8_t clock = 64, encoding = 2, separator = 0, invert = 0;
uint8_t bs[96];
- size_t size = sizeof(bs);
- memset(bs, 0x00, size);
+ memset(bs, 0x00, sizeof(bs));
- // Pyramid uses: ASK Biphase, clk: 32, invert: 0
- uint64_t arg1, arg2;
- arg1 = (10 << 8) + 8;
- arg2 = 32 | 0;
-
if (sscanf(Cmd, "%u %u", &fc, &cn ) != 2) return usage_lf_guard_sim();
facilitycode = (fc & 0x000000FF);
}
PrintAndLog("Simulating Guardall - Facility Code: %u, CardNumber: %u", facilitycode, cardnumber );
-
+
+ // Guard uses: clk: 64, invert: 0, encoding: 2 (ASK Biphase)
+ uint64_t arg1, arg2;
+ arg1 = (clock << 8) | encoding;
+ arg2 = (invert << 8) | separator;
+
+ uint8_t rawbytes[12];
+ size_t size = sizeof(rawbytes);
+ for (uint8_t i=0; i < size; ++i){
+ rawbytes[i] = bytebits_to_byte( bs + (i*8), 8);
+ }
+
UsbCommand c = {CMD_ASK_SIM_TAG, {arg1, arg2, size}};
- memcpy(c.d.asBytes, bs, size);
+ memcpy(c.d.asBytes, rawbytes, size );
clearCommandBuffer();
SendCommand(&c);
return 0;
projects / proxmark3-svn / blobdiff