-//-----------------------------------------------------------------------------\r
-// Definitions of interest to most of the software for this project.\r
-// Jonathan Westhues, Mar 2006\r
-//-----------------------------------------------------------------------------\r
-\r
-#ifndef __PROXMARK3_H\r
-#define __PROXMARK3_H\r
-\r
-// Might as well have the hardware-specific defines everywhere.\r
-#include <at91sam7s128.h>\r
-\r
-#include <config_gpio.h>\r
-#define LOW(x) PIO_OUTPUT_DATA_CLEAR = (1 << (x))\r
-#define HIGH(x) PIO_OUTPUT_DATA_SET = (1 << (x))\r
-\r
-#define SPI_FPGA_MODE 0\r
-#define SPI_LCD_MODE 1\r
-\r
-typedef unsigned long DWORD;\r
-typedef signed long SDWORD;\r
-typedef unsigned long long QWORD;\r
-typedef int BOOL;\r
-typedef unsigned char BYTE;\r
-typedef signed char SBYTE;\r
-typedef unsigned short WORD;\r
-typedef signed short SWORD;\r
-#define TRUE 1\r
-#define FALSE 0\r
-\r
-#include <usb_cmd.h>\r
-\r
-#define PACKED __attribute__((__packed__))\r
-\r
-#define USB_D_PLUS_PULLUP_ON() { \\r
- PIO_OUTPUT_DATA_SET = (1<<GPIO_USB_PU); \\r
- PIO_OUTPUT_ENABLE = (1<<GPIO_USB_PU); \\r
- }\r
-#define USB_D_PLUS_PULLUP_OFF() PIO_OUTPUT_DISABLE = (1<<GPIO_USB_PU)\r
-\r
-#define LED_A_ON() PIO_OUTPUT_DATA_SET = (1<<GPIO_LED_A)\r
-#define LED_A_OFF() PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_LED_A)\r
-#define LED_B_ON() PIO_OUTPUT_DATA_SET = (1<<GPIO_LED_B)\r
-#define LED_B_OFF() PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_LED_B)\r
-#define LED_C_ON() PIO_OUTPUT_DATA_SET = (1<<GPIO_LED_C)\r
-#define LED_C_OFF() PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_LED_C)\r
-#define LED_D_ON() PIO_OUTPUT_DATA_SET = (1<<GPIO_LED_D)\r
-#define LED_D_OFF() PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_LED_D)\r
-#define RELAY_ON() PIO_OUTPUT_DATA_SET = (1<<GPIO_RELAY)\r
-#define RELAY_OFF() PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_RELAY)\r
-#define BUTTON_PRESS() !(PIO_PIN_DATA_STATUS & (1<<GPIO_BUTTON))\r
-//--------------------------------\r
-// USB declarations\r
-\r
-void UsbSendPacket(BYTE *packet, int len);\r
-BOOL UsbConnected();\r
-BOOL UsbPoll(BOOL blinkLeds);\r
-void UsbStart(void);\r
-\r
-// This function is provided by the apps/bootrom, and called from UsbPoll\r
-// if data are available.\r
-void UsbPacketReceived(BYTE *packet, int len);\r
-\r
-#endif\r
+//-----------------------------------------------------------------------------
+// Jonathan Westhues, Mar 2006
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// Hardware and interface definitions
+//-----------------------------------------------------------------------------
+
+#ifndef __PROXMARK3_H
+#define __PROXMARK3_H
+
+// Might as well have the hardware-specific defines everywhere.
+#include "at91sam7s512.h"
+#include "config_gpio.h"
+
+#define WDT_HIT() AT91C_BASE_WDTC->WDTC_WDCR = 0xa5000001
+
+#define PWM_CH_MODE_PRESCALER(x) ((x)<<0)
+#define PWM_CHANNEL(x) (1<<(x))
+
+#define ADC_CHAN_LF 4
+#define ADC_CHAN_HF 5
+#define ADC_MODE_PRESCALE(x) ((x)<<8)
+#define ADC_MODE_STARTUP_TIME(x) ((x)<<16)
+#define ADC_MODE_SAMPLE_HOLD_TIME(x) ((x)<<24)
+#define ADC_CHANNEL(x) (1<<(x))
+#define ADC_END_OF_CONVERSION(x) (1<<(x))
+
+#define SSC_CLOCK_MODE_START(x) ((x)<<8)
+#define SSC_FRAME_MODE_WORDS_PER_TRANSFER(x) ((x)<<8)
+#define SSC_CLOCK_MODE_SELECT(x) ((x)<<0)
+#define SSC_FRAME_MODE_BITS_IN_WORD(x) (((x)-1)<<0)
+
+#define MC_FLASH_COMMAND_KEY ((0x5a)<<24)
+#define MC_FLASH_MODE_FLASH_WAIT_STATES(x) ((x)<<8)
+#define MC_FLASH_MODE_MASTER_CLK_IN_MHZ(x) (((x)+((x)/2))<<16)
+#define MC_FLASH_COMMAND_PAGEN(x) ((x)<<8)
+
+#define RST_CONTROL_KEY (0xa5<<24)
+
+#define PMC_MAIN_OSC_STARTUP_DELAY(x) ((x)<<8)
+#define PMC_PLL_DIVISOR(x) (x)
+#define PMC_PLL_MULTIPLIER(x) (((x)-1)<<16)
+#define PMC_PLL_COUNT_BEFORE_LOCK(x) ((x)<<8)
+#define PMC_PLL_FREQUENCY_RANGE(x) ((x)<<14)
+#define PMC_PLL_USB_DIVISOR(x) ((x)<<28)
+
+#define UDP_INTERRUPT_ENDPOINT(x) (1<<(x))
+#define UDP_CSR_BYTES_RECEIVED(x) (((x) >> 16) & 0x7ff)
+//**************************************************************
+
+#define LOW(x) AT91C_BASE_PIOA->PIO_CODR = (x)
+#define HIGH(x) AT91C_BASE_PIOA->PIO_SODR = (x)
+
+#define SPI_FPGA_MODE 0
+#define SPI_LCD_MODE 1
+
+#define TRUE 1
+#define FALSE 0
+
+#include <usb_cmd.h>
+
+//#define PACKED __attribute__((__packed__))
+
+#define USB_D_PLUS_PULLUP_ON() { \
+ HIGH(GPIO_USB_PU); \
+ AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; \
+ }
+#define USB_D_PLUS_PULLUP_OFF() AT91C_BASE_PIOA->PIO_ODR = GPIO_USB_PU
+
+#define LED_A_ON() HIGH(GPIO_LED_A)
+#define LED_A_OFF() LOW(GPIO_LED_A)
+#define LED_B_ON() HIGH(GPIO_LED_B)
+#define LED_B_OFF() LOW(GPIO_LED_B)
+#define LED_C_ON() HIGH(GPIO_LED_C)
+#define LED_C_OFF() LOW(GPIO_LED_C)
+#define LED_D_ON() HIGH(GPIO_LED_D)
+#define LED_D_OFF() LOW(GPIO_LED_D)
+#define RELAY_ON() HIGH(GPIO_RELAY)
+#define RELAY_OFF() LOW(GPIO_RELAY)
+#define BUTTON_PRESS() !(AT91C_BASE_PIOA->PIO_PDSR & GPIO_BUTTON)
+//--------------------------------
+// USB declarations
+
+void UsbSendPacket(uint8_t *packet, int len);
+int UsbConnected();
+int UsbPoll(int blinkLeds);
+void UsbStart(void);
+
+// This function is provided by the apps/bootrom, and called from UsbPoll
+// if data are available.
+void UsbPacketReceived(uint8_t *packet, int len);
+
+#define VERSION_INFORMATION_MAGIC 0x56334d50
+struct version_information {
+ int magic; /* Magic sequence to identify this as a correct version information structure. Must be VERSION_INFORMATION_MAGIC */
+ char versionversion; /* Must be 1 */
+ char present; /* 1 if the version information could be created at compile time, otherwise 0 and the remaining fields (except for magic) are empty */
+ char clean; /* 1: Tree was clean, no local changes. 0: Tree was unclean. 2: Couldn't be determined */
+ char svnversion[9]; /* String with the SVN revision */
+ char buildtime[30]; /* string with the build time */
+} __attribute__((packed));
+
+#define COMMON_AREA_MAGIC 0x43334d50
+#define COMMON_AREA_COMMAND_NONE 0
+#define COMMON_AREA_COMMAND_ENTER_FLASH_MODE 1
+struct common_area {
+ int magic; /* Magic sequence, to distinguish against random uninitialized memory */
+ char version; /* Must be 1 */
+ char command;
+ struct {
+ unsigned int bootrom_present:1; /* Set when a bootrom that is capable of parsing the common area is present */
+ unsigned int osimage_present:1; /* Set when a osimage that is capable of parsing the common area is present */
+ } __attribute__((packed)) flags;
+ int arg1, arg2;
+} __attribute__((packed));
+
+#endif
projects / proxmark3-svn / blobdiff