Added some previous work of splitting ultralight to its own c-file, ported Pentura_Pr...

[proxmark3-svn] / client / cmdlfem4x.c

diff --git a/client/cmdlfem4x.c b/client/cmdlfem4x.c
index f823750b047192c94723110eb9e5fd679839d45f..a7312d21b81a21a148c7cfe1e0e95f5b4db021d3 100644 (file)
--- a/client/cmdlfem4x.c
+++ b/client/cmdlfem4x.c
@@ -35,6 +35,7 @@ int CmdEM410xRead(const char *Cmd)
   int i, j, clock, header, rows, bit, hithigh, hitlow, first, bit2idx, high, low;
   int parity[4];
   char id[11];
+  char id2[11];
   int retested = 0;
   uint8_t BitStream[MAX_GRAPH_TRACE_LEN];
   high = low = 0;
@@ -101,6 +102,7 @@ retest:
       {
         /* Read another byte! */
         sprintf(id+rows, "%x", (8 * BitStream[i]) + (4 * BitStream[i+1]) + (2 * BitStream[i+2]) + (1 * BitStream[i+3]));
+        sprintf(id2+rows, "%x", (8 * BitStream[i+3]) + (4 * BitStream[i+2]) + (2 * BitStream[i+1]) + (1 * BitStream[i]));
         rows++;
 
         /* Keep parity info */
@@ -135,6 +137,7 @@ retest:
       {
         /* Sweet! */
         PrintAndLog("EM410x Tag ID: %s", id);
+        PrintAndLog("Unique Tag ID: %s", id2);
 
         /* Stop any loops */
         return 1;
@@ -248,11 +251,20 @@ int CmdEM410xSim(const char *Cmd)
  * looped until an EM410x tag is detected */
 int CmdEM410xWatch(const char *Cmd)
 {
+  int read_h = (*Cmd == 'h');
   do
   {
-    CmdLFRead("");
-    CmdSamples("2000");
-  } while ( ! CmdEM410xRead(""));
+    CmdLFRead(read_h ? "h" : "");
+    // 2000 samples is OK for clock=64, but not clock=32.  Probably want
+               //   8000 for clock=16.  Don't want to go too high since old HID driver
+               //   is very slow
+               // TBD: Auto-grow sample size based on detected sample rate.  IE: If the
+               //   rate gets lower, then grow the number of samples
+
+    // Changed by martin, 4000 x 4 = 16000, 
+    // see http://www.proxmark.org/forum/viewtopic.php?pid=7235#p7235
+               CmdSamples("16000");
+ } while ( ! CmdEM410xRead(""));
   return 0;
 }
 
@@ -402,22 +414,66 @@ int CmdEM4x50Read(const char *Cmd)
 
 int CmdEM410xWrite(const char *Cmd)
 {
-  uint64_t id = 0;
-  unsigned int card;
+  uint64_t id = 0xFFFFFFFFFFFFFFFF; // invalid id value
+  int card = 0xFF; // invalid card value
+       unsigned int clock = 0; // invalid clock value
+
+       sscanf(Cmd, "%" PRIx64 " %d %d", &id, &card, &clock);
+
+       // Check ID
+       if (id == 0xFFFFFFFFFFFFFFFF) {
+               PrintAndLog("Error! ID is required.\n");
+               return 0;
+       }
+       if (id >= 0x10000000000) {
+               PrintAndLog("Error! Given EM410x ID is longer than 40 bits.\n");
+               return 0;
+       }
+
+       // Check Card
+       if (card == 0xFF) {
+               PrintAndLog("Error! Card type required.\n");
+               return 0;
+       }
+       if (card < 0) {
+               PrintAndLog("Error! Bad card type selected.\n");
+               return 0;
+       }
+
+       // Check Clock
+       if (card == 1)
+       {
+               // Default: 64
+               if (clock == 0)
+                       clock = 64;
+
+               // Allowed clock rates: 16, 32 and 64
+               if ((clock != 16) && (clock != 32) && (clock != 64)) {
+                       PrintAndLog("Error! Clock rate %d not valid. Supported clock rates are 16, 32 and 64.\n", clock);
+                       return 0;
+               }
+       }
+       else if (clock != 0)
+       {
+               PrintAndLog("Error! Clock rate is only supported on T55x7 tags.\n");
+               return 0;
+       }
+
+       if (card == 1) {
+               PrintAndLog("Writing %s tag with UID 0x%010" PRIx64 " (clock rate: %d)", "T55x7", id, clock);
+               // NOTE: We really should pass the clock in as a separate argument, but to
+               //   provide for backwards-compatibility for older firmware, and to avoid
+               //   having to add another argument to CMD_EM410X_WRITE_TAG, we just store
+               //   the clock rate in bits 8-15 of the card value
+               card = (card & 0xFF) | (((uint64_t)clock << 8) & 0xFF00);
+       }
+       else if (card == 0)
+               PrintAndLog("Writing %s tag with UID 0x%010" PRIx64, "T5555", id, clock);
+       else {
+               PrintAndLog("Error! Bad card type selected.\n");
+               return 0;
+       }
 
-  sscanf(Cmd, "%" PRIx64 " %d", &id, &card);
-
-  if (id >= 0x10000000000) {
-    PrintAndLog("Error! Given EM410x ID is longer than 40 bits.\n");
-    return 0;
-  }
-
-  if (card > 1) {
-    PrintAndLog("Error! Bad card type selected.\n");
-    return 0;
-  }
-
-  PrintAndLog("Writing %s tag with UID 0x%010" PRIx64, card ? "T55x7":"T5555", id);
   UsbCommand c = {CMD_EM410X_WRITE_TAG, {card, (uint32_t)(id >> 32), (uint32_t)id}};
   SendCommand(&c);
 
@@ -527,8 +583,8 @@ static command_t CommandTable[] =
   {"help", CmdHelp, 1, "This help"},
   {"em410xread", CmdEM410xRead, 1, "[clock rate] -- Extract ID from EM410x tag"},
   {"em410xsim", CmdEM410xSim, 0, "<UID> -- Simulate EM410x tag"},
-  {"em410xwatch", CmdEM410xWatch, 0, "Watches for EM410x tags"},
-  {"em410xwrite", CmdEM410xWrite, 1, "<UID> <'0' T5555> <'1' T55x7> -- Write EM410x UID to T5555(Q5) or T55x7 tag"},
+  {"em410xwatch", CmdEM410xWatch, 0, "['h'] -- Watches for EM410x 125/134 kHz tags (option 'h' for 134)"},
+  {"em410xwrite", CmdEM410xWrite, 1, "<UID> <'0' T5555> <'1' T55x7> [clock rate] -- Write EM410x UID to T5555(Q5) or T55x7 tag, optionally setting clock rate"},
   {"em4x50read", CmdEM4x50Read, 1, "Extract data from EM4x50 tag"},
   {"readword", CmdReadWord, 1, "<Word> -- Read EM4xxx word data"},
   {"readwordPWD", CmdReadWordPWD, 1, "<Word> <Password> -- Read EM4xxx word data in password mode"},