FIX: mental note to self, don't forget to adjust messages to new logic

[proxmark3-svn] / armsrc / lfops.c

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index 2f757f1f6704d0ba0686fa82e81557d9bef87199..5c074c3a9f2e1576ed3213903c32697aae8bbdc3 100644 (file)
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -17,7 +17,7 @@
 #include "lfdemod.h"
 #include "lfsampling.h"
 #include "protocols.h"
-#include "usb_cdc.h" //test
+#include "usb_cdc.h" // for usb_poll_validate_length
 
 /**
  * Function to do a modulation and then get samples.
@@ -37,6 +37,8 @@ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint
 
        sample_config sc = { 0,0,1, divisor_used, 0};
        setSamplingConfig(&sc);
+       //clear read buffer
+       BigBuf_Clear_keep_EM();
 
        /* Make sure the tag is reset */
        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
@@ -378,7 +380,7 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
        AcquireTiType();
 
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-       DbpString("Now use 'lf ti read' to check");
+       DbpString("Now use `lf ti read` to check");
 }
 
 void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
@@ -626,7 +628,19 @@ static void biphaseSimBit(uint8_t c, int *n, uint8_t clock, uint8_t *phase)
                memset(dest+(*n), c ^ *phase, clock);
                *phase ^= 1;
        }
+       *n += clock;
+}
 
+static void stAskSimBit(int *n, uint8_t clock) {
+       uint8_t *dest = BigBuf_get_addr();
+       uint8_t halfClk = clock/2;
+       //ST = .5 high .5 low 1.5 high .5 low 1 high    
+       memset(dest+(*n), 1, halfClk);
+       memset(dest+(*n) + halfClk, 0, halfClk);
+       memset(dest+(*n) + clock, 1, clock + halfClk);
+       memset(dest+(*n) + clock*2 + halfClk, 0, halfClk);
+       memset(dest+(*n) + clock*3, 1, clock);
+       *n += clock*4;
 }
 
 // args clock, ask/man or askraw, invert, transmission separator
@@ -644,7 +658,7 @@ void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
                for (i=0; i<size; i++){
                        biphaseSimBit(BitStream[i]^invert, &n, clk, &phase);
                }
-               if (BitStream[0]==BitStream[size-1]){ //run a second set inverted to keep phase in check
+               if (phase==1) { //run a second set inverted to keep phase in check
                        for (i=0; i<size; i++){
                                biphaseSimBit(BitStream[i]^invert, &n, clk, &phase);
                        }
@@ -659,8 +673,10 @@ void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
                        }
                }
        }
-       
-       if (separator==1) Dbprintf("sorry but separator option not yet available"); 
+       if (separator==1 && encoding == 1)
+               stAskSimBit(&n, clk);
+       else if (separator==1)
+               Dbprintf("sorry but separator option not yet available");
 
        Dbprintf("Simulating with clk: %d, invert: %d, encoding: %d, separator: %d, n: %d",clk, invert, encoding, separator, n);
 
@@ -725,6 +741,9 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
        // Configure to go in 125Khz listen mode
        LFSetupFPGAForADC(95, true);
 
+       //clear read buffer
+       BigBuf_Clear_keep_EM();
+
        while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
 
                WDT_HIT();
@@ -815,6 +834,8 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
        uint8_t *dest = BigBuf_get_addr();
        size_t size; 
        int idx=0;
+       //clear read buffer
+       BigBuf_Clear_keep_EM();
        // Configure to go in 125Khz listen mode
        LFSetupFPGAForADC(95, true);
 
@@ -905,6 +926,8 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
        int clk=0, invert=0, errCnt=0, maxErr=20;
        uint32_t hi=0;
        uint64_t lo=0;
+       //clear read buffer
+       BigBuf_Clear_keep_EM();
        // Configure to go in 125Khz listen mode
        LFSetupFPGAForADC(95, true);
 
@@ -966,7 +989,11 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
        uint16_t number=0;
        uint8_t crc = 0;
        uint16_t calccrc = 0;
-       // Configure to go in 125Khz listen mode
+
+       //clear read buffer
+       BigBuf_Clear_keep_EM();
+       
+// Configure to go in 125Khz listen mode
        LFSetupFPGAForADC(95, true);
 
        while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
@@ -1095,7 +1122,7 @@ void T55xxWriteBit(int bit) {
 void T55xxResetRead(void) {
        LED_A_ON();
        //clear buffer now so it does not interfere with timing later
-       BigBuf_Clear_ext(false);
+       BigBuf_Clear_keep_EM();
 
        // Set up FPGA, 125kHz
        LFSetupFPGAForADC(95, true);
@@ -1246,7 +1273,6 @@ void T55xxWakeUp(uint32_t Pwd){
 }
 
 /*-------------- Cloning routines -----------*/
-
 void WriteT55xx(uint32_t *blockdata, uint8_t startblock, uint8_t numblocks) {
        // write last block first and config block last (if included)
        for (uint8_t i = numblocks+startblock; i > startblock; i--)
@@ -1419,7 +1445,7 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) {
        LED_D_ON();
 
        // Write EM410x ID
-       uint32_t data[] = {0, (uint32_t)(id>>32), id & 0xFFFFFFFF};
+       uint32_t data[] = {0, (uint32_t)(id>>32), (uint32_t)(id & 0xFFFFFFFF)};
 
        clock = (card & 0xFF00) >> 8;
        clock = (clock == 0) ? 64 : clock;
@@ -1602,7 +1628,7 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
        uint16_t bufsize = BigBuf_max_traceLen();
        uint32_t i = 0;
 
-       //clear buffer now so it does not interfere with timing later
+       // Clear destination buffer before sending the command
        BigBuf_Clear_ext(false);
        
        //If password mode do login