Fix the AskEdgeDetect cleaning tool

[proxmark3-svn] / armsrc / hitag2.c

diff --git a/armsrc/hitag2.c b/armsrc/hitag2.c
index 4b173d6f223845620eeb47e96e35c89ffb78f628..46432d835b284f06ff785dbe21f1cc5bc924e84e 100644 (file)
--- a/armsrc/hitag2.c
+++ b/armsrc/hitag2.c
@@ -411,7 +411,7 @@ static void hitag_reader_send_bit(int bit) {
        // Binary puls length modulation (BPLM) is used to encode the data stream
        // This means that a transmission of a one takes longer than that of a zero
        
-       // Enable modulation, which means, drop the the field
+       // Enable modulation, which means, drop the field
        HIGH(GPIO_SSC_DOUT);
        
        // Wait for 4-10 times the carrier period
@@ -442,7 +442,7 @@ static void hitag_reader_send_frame(const byte_t* frame, size_t frame_len)
        }
        // Send EOF 
        AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG;
-       // Enable modulation, which means, drop the the field
+       // Enable modulation, which means, drop the field
        HIGH(GPIO_SSC_DOUT);
        // Wait for 4-10 times the carrier period
        while(AT91C_BASE_TC0->TC_CV < T0*6);
@@ -710,22 +710,24 @@ void SnoopHitag(uint32_t type) {
        byte_t rx[HITAG_FRAME_LEN];
        size_t rxlen=0;
        
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
+       // Clean up trace and prepare it for storing frames
+       set_tracing(TRUE);
+       clear_trace();
+       
        auth_table_len = 0;
        auth_table_pos = 0;
+
        BigBuf_free();
     auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
        memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
 
-       // Clean up trace and prepare it for storing frames
-       set_tracing(TRUE);
-       clear_trace();
-       
        DbpString("Starting Hitag2 snoop");
        LED_D_ON();
        
        // Set up eavesdropping mode, frequency divisor which will drive the FPGA
        // and analog mux selection.
-       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT  | FPGA_LF_EDGE_DETECT_TOGGLE_MODE);
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
        SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
@@ -922,6 +924,12 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) {
        bool bQuitTraceFull = false;
        bQuiet = false;
        
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
+       // Clean up trace and prepare it for storing frames
+       set_tracing(TRUE);
+       clear_trace();
+
        auth_table_len = 0;
        auth_table_pos = 0;
     byte_t* auth_table;
@@ -929,10 +937,6 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) {
     auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
        memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
 
-       // Clean up trace and prepare it for storing frames
-       set_tracing(TRUE);
-       clear_trace();
-
        DbpString("Starting Hitag2 simulation");
        LED_D_ON();
        hitag2_init();
@@ -953,7 +957,6 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) {
        
        // Set up simulator mode, frequency divisor which will drive the FPGA
        // and analog mux selection.
-       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_READER_FIELD);
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
        SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
@@ -1145,7 +1148,7 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) {
       
                case RHT2F_CRYPTO: {
                        DbpString("Authenticating using key:");
-                       memcpy(key,htd->crypto.key,4);    //HACK; 4 or 6??  I read both in the code.
+                       memcpy(key,htd->crypto.key,6);    //HACK; 4 or 6??  I read both in the code.
                        Dbhexdump(6,key,false);
                        blocknr = 0;
                        bQuiet = false;