#include "legicrf.h"
static struct legic_frame {
- int bits;
+ uint8_t bits;
uint32_t data;
} current_frame;
*/
// At TIMER_CLOCK3 (MCK/32)
-//#define RWD_TIME_1 150 /* RWD_TIME_PAUSE off, 80us on = 100us */
-//#define RWD_TIME_0 90 /* RWD_TIME_PAUSE off, 40us on = 60us */
-//#define RWD_TIME_PAUSE 30 /* 20us */
-
// testing calculating in (us) microseconds.
#define RWD_TIME_1 120 // READER_TIME_PAUSE 20us off, 80us on = 100us 80 * 1.5 == 120ticks
#define RWD_TIME_0 60 // READER_TIME_PAUSE 20us off, 40us on = 60us 40 * 1.5 == 60ticks
#define RWD_TIME_PAUSE 30 // 20us == 20 * 1.5 == 30ticks */
-#define TAG_BIT_PERIOD 150 // 100us == 100 * 1.5 == 150ticks
+#define TAG_BIT_PERIOD 143 // 100us == 100 * 1.5 == 150ticks
#define TAG_FRAME_WAIT 495 // 330us from READER frame end to TAG frame start. 330 * 1.5 == 495
#define RWD_TIME_FUZZ 20 // rather generous 13us, since the peak detector + hysteresis fuzz quite a bit
# define OPEN_COIL HIGH(GPIO_SSC_DOUT);
#endif
-uint32_t sendFrameStop = 0;
-
// Pause pulse, off in 20us / 30ticks,
// ONE / ZERO bit pulse,
// one == 80us / 120ticks
uint32_t starttime = GET_TICKS, send = 0;
uint16_t mask = 1;
- uint8_t prngstart = legic_prng_count() ;
// xor lsfr onto data.
send = data ^ legic_prng_get_bits(bits);
for (; mask < BITMASK(bits); mask <<= 1) {
- if (send & mask) {
+ if (send & mask)
COIL_PULSE(RWD_TIME_1);
- } else {
+ else
COIL_PULSE(RWD_TIME_0);
- }
}
// Final pause to mark the end of the frame
COIL_PULSE(0);
- sendFrameStop = GET_TICKS;
- uint8_t cmdbytes[] = {
- bits,
- BYTEx(data, 0),
- BYTEx(data, 1),
- BYTEx(send, 0),
- BYTEx(send, 1),
- prngstart,
- legic_prng_count()
- };
- LogTrace(cmdbytes, sizeof(cmdbytes), starttime, sendFrameStop, NULL, TRUE);
+ // log
+ uint8_t cmdbytes[] = {bits, BYTEx(data, 0), BYTEx(data, 1), BYTEx(send, 0), BYTEx(send, 1)};
+ LogTrace(cmdbytes, sizeof(cmdbytes), starttime, GET_TICKS, NULL, TRUE);
}
/* Receive a frame from the card in reader emulation mode, the FPGA and
*/
static void frame_receiveAsReader(struct legic_frame * const f, uint8_t bits) {
- frame_clean(f);
if ( bits > 32 ) return;
uint8_t i = bits, edges = 0;
uint16_t lsfr = 0;
- uint32_t the_bit = 1, next_bit_at = 0, data;
-
- int old_level = 0, level = 0;
+ uint32_t the_bit = 1, next_bit_at = 0, data = 0;
+ uint32_t old_level = 0;
+ volatile uint32_t level = 0;
+ frame_clean(f);
+
AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN;
AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN;
// calibrate the prng.
- //
legic_prng_forward(2);
-
- // precompute the cipher
- uint8_t prngstart = legic_prng_count() ;
-
data = lsfr = legic_prng_get_bits(bits);
//FIXED time between sending frame and now listening frame. 330us
- // 387 = 0x19 0001 1001
- // 480 = 0x19
- // 500 = 0x1C 0001 1100
uint32_t starttime = GET_TICKS;
- //uint16_t mywait = TAG_FRAME_WAIT - (starttime - sendFrameStop);
- //uint16_t mywait = 495 - (starttime - sendFrameStop);
if ( bits == 6) {
- //Dbprintf("6 WAIT %d", 495 - 9 - 9 );
- WaitTicks( 495 - 9 - 9 );
+ //WaitTicks( 495 - 9 - 9 );
+ WaitTicks( 475 );
} else {
- //Dbprintf("x WAIT %d", mywait );
- //WaitTicks( mywait );
WaitTicks( 450 );
}
while ( i-- ){
edges = 0;
- uint8_t adjust = 0;
while ( GET_TICKS < next_bit_at) {
level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN);
++edges;
old_level = level;
-
- if(edges > 20 && adjust == 0) {
- next_bit_at -= 15;
- adjust = 1;
- }
}
next_bit_at += TAG_BIT_PERIOD;
- // We expect 42 edges == ONE
- //if (edges > 20 && edges < 64)
+ // We expect 42 edges (ONE)
if ( edges > 20 )
data ^= the_bit;
f->data = data;
f->bits = bits;
- uint8_t cmdbytes[] = {
- bits,
- BYTEx(data,0),
- BYTEx(data,1),
- BYTEx(data, 0) ^ BYTEx(lsfr,0),
- BYTEx(data, 1) ^ BYTEx(lsfr,1),
- prngstart,
- legic_prng_count()
- };
+ // log
+ uint8_t cmdbytes[] = {bits, BYTEx(data, 0), BYTEx(data, 1)};
LogTrace(cmdbytes, sizeof(cmdbytes), starttime, GET_TICKS, NULL, FALSE);
}
frame_receiveAsReader(¤t_frame, 6);
- // fixed delay before sending ack.
- WaitTicks(366); // 244us
- legic_prng_forward(1); //240us / 100 == 2.4 iterations
+ // 292us (438t) - fixed delay before sending ack.
+ // minus log and stuff 100tick?
+ WaitTicks(338);
+ legic_prng_forward(3);
// Send obsfuscated acknowledgment frame.
// 0x19 = 0x18 MIM22, 0x01 LSB READCMD
case 0x3D: frame_sendAsReader(0x39, 6); break;
default: break;
}
+
+ legic_prng_forward(2);
return current_frame.data;
}
LOW(GPIO_SSC_DOUT);
WaitUS(20);
WDT_HIT();
- set_tracing(FALSE);
}
// calculate crc4 for a legic READ command
-// 5,8,10 address size.
-static uint32_t legic4Crc(uint8_t legicCmd, uint16_t byte_index, uint8_t value, uint8_t cmd_sz) {
+static uint32_t legic4Crc(uint8_t cmd, uint16_t byte_index, uint8_t value, uint8_t cmd_sz) {
crc_clear(&legic_crc);
- //uint32_t temp = (value << cmd_sz) | (byte_index << 1) | legicCmd;
- //crc_update(&legic_crc, temp, cmd_sz + 8 );
- crc_update(&legic_crc, 1, 1); /* CMD_READ */
- crc_update(&legic_crc, byte_index, cmd_sz-1);
- crc_update(&legic_crc, value, 8);
+ uint32_t temp = (value << cmd_sz) | (byte_index << 1) | cmd;
+ crc_update(&legic_crc, temp, cmd_sz + 8 );
return crc_finish(&legic_crc);
}
-int legic_read_byte(int byte_index, int cmd_sz) {
+int legic_read_byte( uint16_t index, uint8_t cmd_sz) {
- uint8_t byte = 0, crc = 0, calcCrc = 0;
- uint32_t cmd = (byte_index << 1) | LEGIC_READ;
-
- // (us)| ticks
- // -------------
- // 330 | 495
- // 460 | 690
- // 258 | 387
- // 244 | 366
- WaitTicks(387);
- legic_prng_forward(4); // 460 / 100 = 4.6 iterations
+ uint8_t byte, crc, calcCrc = 0;
+ uint32_t cmd = (index << 1) | LEGIC_READ;
+
+ WaitTicks(366);
frame_sendAsReader(cmd, cmd_sz);
frame_receiveAsReader(¤t_frame, 12);
byte = BYTEx(current_frame.data, 0);
- calcCrc = legic4Crc(LEGIC_READ, byte_index, byte, cmd_sz);
crc = BYTEx(current_frame.data, 1);
+
+ calcCrc = legic4Crc(LEGIC_READ, index, byte, cmd_sz);
if( calcCrc != crc ) {
Dbprintf("!!! crc mismatch: expected %x but got %x !!!", calcCrc, crc);
return -1;
}
+
+ legic_prng_forward(4);
+ WaitTicks(50);
return byte;
}
return -1;
}
-int LegicRfReader(int offset, int bytes, int iv) {
+int LegicRfReader(uint16_t offset, uint16_t len, uint8_t iv) {
- uint16_t byte_index = 0;
- uint8_t cmd_sz = 0, isOK = 1;
- int card_sz = 0;
+ len &= 0x3FF;
- LegicCommonInit();
-
- uint32_t tag_type = setup_phase_reader(iv);
+ uint16_t i = 0;
+ uint8_t isOK = 1;
+ legic_card_select_t card;
- switch_off_tag_rwd();
+ LegicCommonInit();
- switch(tag_type) {
- case 0x0d:
- if ( MF_DBGLEVEL >= 2) DbpString("MIM22 card found, reading card");
- cmd_sz = 6;
- card_sz = 22;
- break;
- case 0x1d:
- if ( MF_DBGLEVEL >= 2) DbpString("MIM256 card found, reading card");
- cmd_sz = 9;
- card_sz = 256;
- break;
- case 0x3d:
- if ( MF_DBGLEVEL >= 2) DbpString("MIM1024 card found, reading card");
- cmd_sz = 11;
- card_sz = 1024;
- break;
- default:
- if ( MF_DBGLEVEL >= 1) Dbprintf("Unknown card format: %x", tag_type);
- isOK = 0;
- goto OUT;
- break;
+ if ( legic_select_card_iv(&card, iv) ) {
+ isOK = 0;
+ goto OUT;
}
- if (bytes == -1)
- bytes = card_sz;
- if (bytes + offset >= card_sz)
- bytes = card_sz - offset;
+ switch_off_tag_rwd();
+
+ if (len + offset >= card.cardsize)
+ len = card.cardsize - offset;
- // Start setup and read bytes.
setup_phase_reader(iv);
-
+
LED_B_ON();
- while (byte_index < bytes) {
- int r = legic_read_byte(byte_index + offset, cmd_sz);
+ while (i < len) {
+ int r = legic_read_byte(offset + i, card.cmdsize);
if (r == -1 || BUTTON_PRESS()) {
- if ( MF_DBGLEVEL >= 3) DbpString("operation aborted");
+ if ( MF_DBGLEVEL >= 2) DbpString("operation aborted");
isOK = 0;
goto OUT;
}
- cardmem[++byte_index] = r;
+ cardmem[i++] = r;
WDT_HIT();
}
WDT_HIT();
switch_off_tag_rwd();
LEDsoff();
- uint8_t len = (bytes & 0x3FF);
cmd_send(CMD_ACK,isOK,len,0,cardmem,len);
return 0;
}
return 0;
}*/
-void LegicRfWriter(int offset, int bytes, int iv) {
-
- int byte_index = 0, addr_sz = 0;
+void LegicRfWriter(uint16_t offset, uint16_t bytes, uint8_t iv) {
- LegicCommonInit();
+ int byte_index = 0;
+ uint8_t isOK = 1;
+ legic_card_select_t card;
- if ( MF_DBGLEVEL >= 2) DbpString("setting up legic card");
+ LegicCommonInit();
- uint32_t tag_type = setup_phase_reader(iv);
+ if ( legic_select_card_iv(&card, iv) ) {
+ isOK = 0;
+ goto OUT;
+ }
switch_off_tag_rwd();
- switch(tag_type) {
+ switch(card.tagtype) {
case 0x0d:
if(offset+bytes > 22) {
Dbprintf("Error: can not write to 0x%03.3x on MIM22", offset + bytes);
return;
}
- addr_sz = 5;
if ( MF_DBGLEVEL >= 2) Dbprintf("MIM22 card found, writing 0x%02.2x - 0x%02.2x ...", offset, offset + bytes);
break;
case 0x1d:
Dbprintf("Error: can not write to 0x%03.3x on MIM256", offset + bytes);
return;
}
- addr_sz = 8;
if ( MF_DBGLEVEL >= 2) Dbprintf("MIM256 card found, writing 0x%02.2x - 0x%02.2x ...", offset, offset + bytes);
break;
case 0x3d:
Dbprintf("Error: can not write to 0x%03.3x on MIM1024", offset + bytes);
return;
}
- addr_sz = 10;
if ( MF_DBGLEVEL >= 2) Dbprintf("MIM1024 card found, writing 0x%03.3x - 0x%03.3x ...", offset, offset + bytes);
break;
default:
- Dbprintf("No or unknown card found, aborting");
return;
}
//check if the DCF should be changed
if ( ((byte_index+offset) == 0x05) && (bytes >= 0x02) ) {
//write DCF in reverse order (addr 0x06 before 0x05)
- r = legic_write_byte(cardmem[(0x06-byte_index)], (0x06-byte_index), addr_sz);
+ r = legic_write_byte(cardmem[(0x06-byte_index)], (0x06-byte_index), card.addrsize);
- // write second byte on success...
+ // write second byte on success
if(r == 0) {
byte_index++;
- r = legic_write_byte(cardmem[(0x06-byte_index)], (0x06-byte_index), addr_sz);
+ r = legic_write_byte(cardmem[(0x06-byte_index)], (0x06-byte_index), card.addrsize);
}
}
else {
- r = legic_write_byte(cardmem[byte_index+offset], byte_index+offset, addr_sz);
+ r = legic_write_byte(cardmem[byte_index+offset], byte_index+offset, card.addrsize);
}
if ((r != 0) || BUTTON_PRESS()) {
Dbprintf("operation aborted @ 0x%03.3x", byte_index);
- switch_off_tag_rwd();
- LEDsoff();
- return;
+ isOK = 0;
+ goto OUT;
}
WDT_HIT();
byte_index++;
}
- LEDsoff();
- if ( MF_DBGLEVEL >= 1) DbpString("write successful");
+
+OUT:
+ cmd_send(CMD_ACK, isOK, 0,0,0,0);
+ switch_off_tag_rwd();
+ LEDsoff();
}
-void LegicRfRawWriter(int address, int byte, int iv) {
+void LegicRfRawWriter(int address, int byte, uint8_t iv) {
int byte_index = 0, addr_sz = 0;
if ( MF_DBGLEVEL >= 1) DbpString("write successful");
}
-void LegicRfInfo(void){
+int legic_select_card_iv(legic_card_select_t *p_card, uint8_t iv){
- LegicCommonInit();
- uint32_t tag_type = setup_phase_reader(0x55);
- uint8_t cmd_sz = 0;
- uint16_t card_sz = 0;
+ if ( p_card == NULL ) return 1;
- switch(tag_type) {
+ p_card->tagtype = setup_phase_reader(iv);
+
+ switch(p_card->tagtype) {
case 0x0d:
- cmd_sz = 6;
- card_sz = 22;
+ p_card->cmdsize = 6;
+ p_card->addrsize = 5;
+ p_card->cardsize = 22;
break;
case 0x1d:
- cmd_sz = 9;
- card_sz = 256;
+ p_card->cmdsize = 9;
+ p_card->addrsize = 8;
+ p_card->cardsize = 256;
break;
case 0x3d:
- cmd_sz = 11;
- card_sz = 1024;
+ p_card->cmdsize = 11;
+ p_card->addrsize = 10;
+ p_card->cardsize = 1024;
break;
default:
- cmd_send(CMD_ACK,0,0,0,0,0);
- goto OUT;
+ p_card->cmdsize = 0;
+ p_card->addrsize = 0;
+ p_card->cardsize = 0;
+ return 2;
+ break;
+ }
+ return 0;
+}
+int legic_select_card(legic_card_select_t *p_card){
+ return legic_select_card_iv(p_card, 0x01);
+}
+
+void LegicRfInfo(void){
+
+ uint8_t buf[sizeof(legic_card_select_t)] = {0x00};
+ legic_card_select_t *card = (legic_card_select_t*) buf;
+
+ LegicCommonInit();
+
+ if ( legic_select_card(card) ) {
+ cmd_send(CMD_ACK,0,0,0,0,0);
+ goto OUT;
}
- // read UID bytes.
- uint8_t uid[] = {0,0,0,0};
- for ( uint8_t i = 0; i < sizeof(uid); ++i) {
- int r = legic_read_byte(i, cmd_sz);
+ // read UID bytes
+ for ( uint8_t i = 0; i < sizeof(card->uid); ++i) {
+ int r = legic_read_byte(i, card->cmdsize);
if ( r == -1 ) {
cmd_send(CMD_ACK,0,0,0,0,0);
goto OUT;
}
- uid[i] = r & 0xFF;
+ card->uid[i] = r & 0xFF;
}
- cmd_send(CMD_ACK,1,card_sz,0,uid,sizeof(uid));
-OUT:
+ cmd_send(CMD_ACK, 1, 0, 0, buf, sizeof(legic_card_select_t));
+
+OUT:
switch_off_tag_rwd();
LEDsoff();
-
}
/* Handle (whether to respond) a frame in tag mode
projects / proxmark3-svn / blobdiff