//-----------------------------------------------------------------------------\r
// Low frequency T55xx commands\r
//-----------------------------------------------------------------------------\r
-\r
-#include <stdio.h>\r
-#include <string.h>\r
-#include <inttypes.h>\r
-#include <time.h>\r
-#include "proxmark3.h"\r
-#include "ui.h"\r
-#include "graph.h"\r
-#include "cmdmain.h"\r
-#include "cmdparser.h"\r
-#include "cmddata.h"\r
-#include "cmdlf.h"\r
#include "cmdlft55xx.h"\r
-#include "util.h"\r
-#include "data.h"\r
-#include "lfdemod.h"\r
-#include "../common/crc.h"\r
-#include "../common/iso14443crc.h"\r
-#include "cmdhf14a.h"\r
-\r
-#define T55x7_CONFIGURATION_BLOCK 0x00\r
-#define T55x7_PAGE0 0x00\r
-#define T55x7_PAGE1 0x01\r
-#define T55x7_PWD 0x00000010\r
-#define REGULAR_READ_MODE_BLOCK 0xFF\r
\r
// Default configuration\r
t55xx_conf_block_t config = { .modulation = DEMOD_ASK, .inverted = FALSE, .offset = 0x00, .block0 = 0x00, .Q5 = FALSE };\r
int usage_t55xx_config(){\r
PrintAndLog("Usage: lf t55xx config [d <demodulation>] [i 1] [o <offset>] [Q5]");\r
PrintAndLog("Options:");\r
- PrintAndLog(" h This help");\r
- PrintAndLog(" b <8|16|32|40|50|64|100|128> Set bitrate");\r
- PrintAndLog(" d <FSK|FSK1|FSK1a|FSK2|FSK2a|ASK|PSK1|PSK2|NRZ|BI|BIa> Set demodulation FSK / ASK / PSK / NRZ / Biphase / Biphase A");\r
- PrintAndLog(" i [1] Invert data signal, defaults to normal");\r
- PrintAndLog(" o [offset] Set offset, where data should start decode in bitstream");\r
- PrintAndLog(" Q5 Set as Q5(T5555) chip instead of T55x7");\r
+ PrintAndLog(" h - This help");\r
+ PrintAndLog(" b <8|16|32|40|50|64|100|128> - Set bitrate");\r
+ PrintAndLog(" d <FSK|FSK1|FSK1a|FSK2|FSK2a|ASK|PSK1|PSK2|NRZ|BI|BIa> - Set demodulation FSK / ASK / PSK / NRZ / Biphase / Biphase A");\r
+ PrintAndLog(" i [1] - Invert data signal, defaults to normal");\r
+ PrintAndLog(" o [offset] - Set offset, where data should start decode in bitstream");\r
+ PrintAndLog(" Q5 - Set as Q5(T5555) chip instead of T55x7");\r
+ PrintAndLog(" ST - Set Sequence Terminator on");\r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
PrintAndLog(" lf t55xx config d FSK - FSK demodulation");\r
int usage_t55xx_trace() {\r
PrintAndLog("Usage: lf t55xx trace [1]");\r
PrintAndLog("Options:");\r
- PrintAndLog(" [graph buffer data] - if set, use Graphbuffer otherwise read data from tag.");\r
+ PrintAndLog(" 1 - if set, use Graphbuffer otherwise read data from tag.");\r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
PrintAndLog(" lf t55xx trace");\r
int usage_t55xx_info() {\r
PrintAndLog("Usage: lf t55xx info [1]");\r
PrintAndLog("Options:");\r
- PrintAndLog(" [graph buffer data] - if set, use Graphbuffer otherwise read data from tag.");\r
+ PrintAndLog(" 1 - if set, use Graphbuffer otherwise read data from tag.");\r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
PrintAndLog(" lf t55xx info");\r
return 0;\r
}\r
int usage_t55xx_detect(){\r
- PrintAndLog("Usage: lf t55xx detect [1]");\r
+ PrintAndLog("Usage: lf t55xx detect [1] [p <password>]");\r
PrintAndLog("Options:");\r
- PrintAndLog(" [graph buffer data] - if set, use Graphbuffer otherwise read data from tag.");\r
+ PrintAndLog(" 1 - if set, use Graphbuffer otherwise read data from tag.");\r
+ PrintAndLog(" p <password> - OPTIONAL password (8 hex characters)");\r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
PrintAndLog(" lf t55xx detect");\r
PrintAndLog(" lf t55xx detect 1");\r
+ PrintAndLog(" lf t55xx detect p 11223344");\r
PrintAndLog("");\r
return 0;\r
}\r
PrintAndLog(" lf t55xx wakeup p 11223344 - send wakeup password");\r
return 0;\r
}\r
-\r
+int usage_t55xx_bruteforce(){\r
+ PrintAndLog("This command uses A) bruteforce to scan a number range");\r
+ PrintAndLog(" B) a dictionary attack");\r
+ PrintAndLog("press 'enter' to cancel the command");\r
+ PrintAndLog("Usage: lf t55xx bruteforce [h] <start password> <end password> [i <*.dic>]");\r
+ PrintAndLog(" password must be 4 bytes (8 hex symbols)");\r
+ PrintAndLog("Options:");\r
+ PrintAndLog(" h - this help");\r
+ PrintAndLog(" <start_pwd> - 4 byte hex value to start pwd search at");\r
+ PrintAndLog(" <end_pwd> - 4 byte hex value to end pwd search at");\r
+ PrintAndLog(" i <*.dic> - loads a default keys dictionary file <*.dic>");\r
+ PrintAndLog("");\r
+ PrintAndLog("Examples:");\r
+ PrintAndLog(" lf t55xx bruteforce aaaaaaaa bbbbbbbb");\r
+ PrintAndLog(" lf t55xx bruteforce i default_pwd.dic");\r
+ PrintAndLog("");\r
+ return 0;\r
+}\r
+int usage_t55xx_recoverpw(){\r
+ PrintAndLog("This command uses a few tricks to try to recover mangled password");\r
+ PrintAndLog("press 'enter' to cancel the command");\r
+ PrintAndLog("WARNING: this may brick non-password protected chips!");\r
+ PrintAndLog("Usage: lf t55xx recoverpw [password]");\r
+ PrintAndLog(" password must be 4 bytes (8 hex symbols)");\r
+ PrintAndLog(" default password is 51243648, used by many cloners");\r
+ PrintAndLog("Options:");\r
+ PrintAndLog(" h - this help");\r
+ PrintAndLog(" [password] - 4 byte hex value of password written by cloner");\r
+ PrintAndLog("");\r
+ PrintAndLog("Examples:");\r
+ PrintAndLog(" lf t55xx recoverpw");\r
+ PrintAndLog(" lf t55xx recoverpw 51243648");\r
+ PrintAndLog("");\r
+ return 0;\r
+}int usage_t55xx_wipe(){\r
+ PrintAndLog("Usage: lf t55xx wipe [h] [Q5]");\r
+ PrintAndLog("This commands wipes a tag, fills blocks 1-7 with zeros and a default configuration block");\r
+ PrintAndLog("Options:");\r
+ PrintAndLog(" h - this help");\r
+ PrintAndLog(" Q5 - indicates to use the T5555 (Q5) default configuration block");\r
+ PrintAndLog("");\r
+ PrintAndLog("Examples:");\r
+ PrintAndLog(" lf t55xx wipe - wipes a t55x7 tag, config block 0x000880E0");\r
+ PrintAndLog(" lf t55xx wipe Q5 - wipes a t5555 Q5 tag, config block 0x6001F004");\r
+ return 0;\r
+}\r
static int CmdHelp(const char *Cmd);\r
\r
void printT5xxHeader(uint8_t page){\r
PrintAndLog("Reading Page %d:", page); \r
- PrintAndLog("blk | hex data | binary");\r
- PrintAndLog("----+----------+---------------------------------"); \r
+ PrintAndLog("blk | hex data | binary | ascii");\r
+ PrintAndLog("----+----------+----------------------------------+-------"); \r
}\r
\r
int CmdT55xxSetConfig(const char *Cmd) {\r
uint8_t bitRate = 0;\r
uint8_t rates[9] = {8,16,32,40,50,64,100,128,0};\r
uint8_t cmdp = 0;\r
- config.Q5 = FALSE;\r
bool errors = FALSE;\r
while(param_getchar(Cmd, cmdp) != 0x00 && !errors)\r
{\r
config.Q5 = TRUE;\r
cmdp++;\r
break;\r
+ case 'S':\r
+ case 's': \r
+ config.ST = TRUE;\r
+ cmdp++;\r
+ break;\r
default:\r
PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
errors = TRUE;\r
char buf[30] = {0x00};\r
char *cmdStr = buf;\r
int ans = 0;\r
+ bool ST = config.ST;\r
uint8_t bitRate[8] = {8,16,32,40,50,64,100,128};\r
DemodBufferLen = 0x00;\r
\r
break;\r
case DEMOD_ASK:\r
snprintf(cmdStr, sizeof(buf),"%d %d 1", bitRate[config.bitrate], config.inverted );\r
- ans = ASKDemod(cmdStr, FALSE, FALSE, 1);\r
+ ans = ASKDemod_ext(cmdStr, FALSE, FALSE, 1, &ST);\r
break;\r
case DEMOD_PSK1:\r
// skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise)\r
+ save_restoreGB(1);\r
CmdLtrim("160");\r
snprintf(cmdStr, sizeof(buf),"%d %d 6", bitRate[config.bitrate], config.inverted );\r
ans = PSKDemod(cmdStr, FALSE);\r
+ //undo trim samples\r
+ save_restoreGB(0);\r
break;\r
case DEMOD_PSK2: //inverted won't affect this\r
case DEMOD_PSK3: //not fully implemented\r
// skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise)\r
+ save_restoreGB(1);\r
CmdLtrim("160");\r
snprintf(cmdStr, sizeof(buf),"%d 0 6", bitRate[config.bitrate] );\r
ans = PSKDemod(cmdStr, FALSE);\r
psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
+ //undo trim samples\r
+ save_restoreGB(0);\r
break;\r
case DEMOD_NRZ:\r
snprintf(cmdStr, sizeof(buf),"%d %d 1", bitRate[config.bitrate], config.inverted );\r
return (bool) ans;\r
}\r
\r
-int CmdT55xxDetect(const char *Cmd){\r
-\r
- //bool override = false;\r
- //bool pwdmode = false;\r
+bool DecodeT5555TraceBlock() {\r
+ DemodBufferLen = 0x00;\r
+ \r
+ // According to datasheet. Always: RF/64, not inverted, Manchester\r
+ return (bool) ASKDemod("64 0 1", FALSE, FALSE, 1);\r
+}\r
\r
- uint32_t password = 0; //default to blank Block 7\r
- bool usepwd = ( strlen(Cmd) > 0); \r
- if ( usepwd ){\r
- password = param_get32ex(Cmd, 0, 0, 16);\r
- // if (param_getchar(Cmd, 1) =='o' )\r
- // override = true;\r
+// sanity check. Don't use proxmark if it is offline and you didn't specify useGraphbuf\r
+static int SanityOfflineCheck( bool useGraphBuffer ){\r
+ if ( !useGraphBuffer && offline) {\r
+ PrintAndLog("Your proxmark3 device is offline. Specify [1] to use graphbuffer data instead");\r
+ return 0;\r
}\r
+ return 1;\r
+}\r
\r
- char cmdp = param_getchar(Cmd, 0);\r
- if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') return usage_t55xx_detect();\r
+int CmdT55xxDetect(const char *Cmd){\r
+ bool errors = FALSE;\r
+ bool useGB = FALSE;\r
+ bool usepwd = FALSE;\r
+ uint32_t password = 0;\r
+ uint8_t cmdp = 0;\r
+\r
+ while(param_getchar(Cmd, cmdp) != 0x00 && !errors) {\r
+ switch(param_getchar(Cmd, cmdp)) {\r
+ case 'h':\r
+ case 'H':\r
+ return usage_t55xx_detect();\r
+ case 'p':\r
+ case 'P':\r
+ password = param_get32ex(Cmd, cmdp+1, 0, 16);\r
+ usepwd = TRUE;\r
+ cmdp += 2;\r
+ break;\r
+ case '1':\r
+ // use Graphbuffer data\r
+ useGB = TRUE;\r
+ cmdp++;\r
+ break;\r
+ default:\r
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
+ errors = true;\r
+ break;\r
+ }\r
+ }\r
+ if (errors) return usage_t55xx_detect();\r
\r
- if (strlen(Cmd)==0) {\r
- password = param_get32ex(Cmd, 0, 0, 16);\r
- //if (param_getchar(Cmd, 1) =='o' ) override = true;\r
+ // sanity check.\r
+ if (!SanityOfflineCheck(useGB)) return 1;\r
+ \r
+ if ( !useGB) {\r
+ if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, usepwd, password) )\r
+ return 1;\r
}\r
-\r
- if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, usepwd, password) )\r
- return 0;\r
- \r
+ \r
if ( !tryDetectModulation() )\r
PrintAndLog("Could not detect modulation automatically. Try setting it manually with \'lf t55xx config\'");\r
\r
- return 1;\r
+ return 0;\r
}\r
\r
// detect configuration?\r
t55xx_conf_block_t tests[15];\r
int bitRate=0;\r
uint8_t fc1 = 0, fc2 = 0, clk=0;\r
- save_restoreGB(1);\r
\r
if (GetFskClock("", FALSE, FALSE)){ \r
fskClocks(&fc1, &fc2, &clk, FALSE);\r
tests[hits].bitrate = bitRate;\r
tests[hits].inverted = FALSE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ tests[hits].ST = FALSE;\r
++hits;\r
}\r
if ( FSKrawDemod("0 1", FALSE) && test(DEMOD_FSK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
tests[hits].modulation = DEMOD_FSK1;\r
else if (fc1 == 10 && fc2 == 8)\r
tests[hits].modulation = DEMOD_FSK2a;\r
-\r
tests[hits].bitrate = bitRate;\r
tests[hits].inverted = TRUE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ tests[hits].ST = FALSE;\r
++hits;\r
}\r
} else {\r
clk = GetAskClock("", FALSE, FALSE);\r
if (clk>0) {\r
- if ( ASKDemod("0 0 1", TRUE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
+ tests[hits].ST = TRUE;\r
+ // "0 0 1 " == clock auto, invert false, maxError 1.\r
+ // false = no verbose\r
+ // false = no emSearch\r
+ // 1 = Ask/Man\r
+ // st = true\r
+ if ( ASKDemod_ext("0 0 1", FALSE, FALSE, 1, &tests[hits].ST) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
tests[hits].modulation = DEMOD_ASK;\r
tests[hits].bitrate = bitRate;\r
tests[hits].inverted = FALSE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
++hits;\r
}\r
- if ( ASKDemod("0 1 1", TRUE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
+ tests[hits].ST = TRUE;\r
+ // "0 0 1 " == clock auto, invert true, maxError 1.\r
+ // false = no verbose\r
+ // false = no emSearch\r
+ // 1 = Ask/Man\r
+ // st = true\r
+ if ( ASKDemod_ext("0 1 1", FALSE, FALSE, 1, &tests[hits].ST) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
tests[hits].modulation = DEMOD_ASK;\r
tests[hits].bitrate = bitRate;\r
tests[hits].inverted = TRUE;\r
tests[hits].bitrate = bitRate;\r
tests[hits].inverted = FALSE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ tests[hits].ST = FALSE;\r
++hits;\r
}\r
if ( ASKbiphaseDemod("0 0 1 2", FALSE) && test(DEMOD_BIa, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5) ) {\r
tests[hits].bitrate = bitRate;\r
tests[hits].inverted = TRUE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ tests[hits].ST = FALSE;\r
++hits;\r
}\r
}\r
//undo trim from ask\r
- save_restoreGB(0);\r
+ //save_restoreGB(0);\r
clk = GetNrzClock("", FALSE, FALSE);\r
if (clk>0) {\r
if ( NRZrawDemod("0 0 1", FALSE) && test(DEMOD_NRZ, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
tests[hits].bitrate = bitRate;\r
tests[hits].inverted = FALSE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ tests[hits].ST = FALSE;\r
++hits;\r
}\r
\r
tests[hits].bitrate = bitRate;\r
tests[hits].inverted = TRUE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ tests[hits].ST = FALSE;\r
++hits;\r
}\r
}\r
\r
- //undo trim from nrz\r
- save_restoreGB(0);\r
+ // allow undo\r
// skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise)\r
+ save_restoreGB(1);\r
CmdLtrim("160");\r
clk = GetPskClock("", FALSE, FALSE);\r
if (clk>0) {\r
tests[hits].bitrate = bitRate;\r
tests[hits].inverted = FALSE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ tests[hits].ST = FALSE;\r
++hits;\r
}\r
if ( PSKDemod("0 1 6", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
tests[hits].bitrate = bitRate;\r
tests[hits].inverted = TRUE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ tests[hits].ST = FALSE;\r
++hits;\r
}\r
// PSK2 - needs a call to psk1TOpsk2.\r
tests[hits].bitrate = bitRate;\r
tests[hits].inverted = FALSE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ tests[hits].ST = FALSE;\r
++hits;\r
}\r
} // inverse waves does not affect this demod\r
tests[hits].bitrate = bitRate;\r
tests[hits].inverted = FALSE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ tests[hits].ST = FALSE;\r
++hits;\r
}\r
} // inverse waves does not affect this demod\r
}\r
+ //undo trim samples\r
+ save_restoreGB(0);\r
} \r
- save_restoreGB(0); \r
if ( hits == 1) {\r
config.modulation = tests[0].modulation;\r
config.bitrate = tests[0].bitrate;\r
config.inverted = tests[0].inverted;\r
config.offset = tests[0].offset;\r
config.block0 = tests[0].block0;\r
+ config.Q5 = tests[0].Q5;\r
+ config.ST = tests[0].ST;\r
printConfiguration( config );\r
return TRUE;\r
}\r
\r
+ bool retval = FALSE;\r
if ( hits > 1) {\r
PrintAndLog("Found [%d] possible matches for modulation.",hits);\r
for(int i=0; i<hits; ++i){\r
- PrintAndLog("--[%d]---------------", i+1);\r
+ retval = testKnownConfigBlock(tests[i].block0);\r
+ if ( retval ) { \r
+ PrintAndLog("--[%d]--------------- << selected this", i+1);\r
+ config.modulation = tests[i].modulation;\r
+ config.bitrate = tests[i].bitrate;\r
+ config.inverted = tests[i].inverted;\r
+ config.offset = tests[i].offset;\r
+ config.block0 = tests[i].block0;\r
+ config.Q5 = tests[i].Q5;\r
+ config.ST = tests[i].ST;\r
+ } else {\r
+ PrintAndLog("--[%d]---------------", i+1);\r
+ }\r
printConfiguration( tests[i] );\r
}\r
}\r
+ return retval;\r
+}\r
+\r
+bool testKnownConfigBlock(uint32_t block0) {\r
+ switch(block0){\r
+ case T55X7_DEFAULT_CONFIG_BLOCK:\r
+ case T55X7_RAW_CONFIG_BLOCK:\r
+ case T55X7_EM_UNIQUE_CONFIG_BLOCK:\r
+ case T55X7_FDXB_CONFIG_BLOCK:\r
+ case T55X7_HID_26_CONFIG_BLOCK:\r
+ case T55X7_PYRAMID_CONFIG_BLOCK:\r
+ case T55X7_INDALA_64_CONFIG_BLOCK:\r
+ case T55X7_INDALA_224_CONFIG_BLOCK:\r
+ case T55X7_GUARDPROXII_CONFIG_BLOCK:\r
+ case T55X7_VIKING_CONFIG_BLOCK:\r
+ case T55X7_NORALYS_CONFIG_BLOCK:\r
+ case T55X7_IOPROX_CONFIG_BLOCK:\r
+ case T55X7_PRESCO_CONFIG_BLOCK:\r
+ return TRUE;\r
+ }\r
return FALSE;\r
}\r
\r
return FALSE;\r
}\r
\r
+int convertQ5bitRate(uint8_t bitRateRead) {\r
+ uint8_t expected[] = {8, 16, 32, 40, 50, 64, 100, 128};\r
+ for (int i=0; i<8; i++)\r
+ if (expected[i] == bitRateRead)\r
+ return i;\r
+\r
+ return -1;\r
+}\r
+\r
bool testQ5(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk){\r
\r
if ( DemodBufferLen < 64 ) return FALSE;\r
uint8_t safer = PackBits(si, 4, DemodBuffer); si += 4; //master key\r
uint8_t resv = PackBits(si, 8, DemodBuffer); si += 8;\r
// 2nibble must be zeroed.\r
- if (safer != 0x6) continue;\r
+ if (safer != 0x6 && safer != 0x9) continue;\r
if ( resv > 0x00) continue;\r
//uint8_t pageSel = PackBits(si, 1, DemodBuffer); si += 1;\r
//uint8_t fastWrite = PackBits(si, 1, DemodBuffer); si += 1;\r
si += 1+1;\r
- int bitRate = PackBits(si, 5, DemodBuffer)*2 + 2; si += 5; //bit rate\r
+ int bitRate = PackBits(si, 6, DemodBuffer)*2 + 2; si += 6; //bit rate\r
if (bitRate > 128 || bitRate < 8) continue;\r
\r
//uint8_t AOR = PackBits(si, 1, DemodBuffer); si += 1; \r
//test modulation\r
if (!testQ5Modulation(mode, modread)) continue;\r
if (bitRate != clk) continue;\r
- *fndBitRate = bitRate;\r
+ *fndBitRate = convertQ5bitRate(bitRate);\r
+ if (*fndBitRate < 0) continue;\r
*offset = idx;\r
\r
return TRUE;\r
uint8_t extend = PackBits(si, 1, DemodBuffer); si += 1; //bit 15 extended mode\r
uint8_t modread = PackBits(si, 5, DemodBuffer); si += 5+2+1; \r
//uint8_t pskcr = PackBits(si, 2, DemodBuffer); si += 2+1; //could check psk cr\r
- uint8_t nml01 = PackBits(si, 1, DemodBuffer); si += 1+5; //bit 24, 30, 31 could be tested for 0 if not extended mode\r
- uint8_t nml02 = PackBits(si, 2, DemodBuffer); si += 2;\r
+ //uint8_t nml01 = PackBits(si, 1, DemodBuffer); si += 1+5; //bit 24, 30, 31 could be tested for 0 if not extended mode\r
+ //uint8_t nml02 = PackBits(si, 2, DemodBuffer); si += 2;\r
\r
//if extended mode\r
bool extMode =( (safer == 0x6 || safer == 0x9) && extend) ? TRUE : FALSE;\r
\r
if (!extMode){\r
- if (nml01 || nml02 || xtRate) continue;\r
+ if (xtRate) continue; //nml01 || nml02 || caused issues on noralys tags\r
}\r
//test modulation\r
if (!testModulation(mode, modread)) continue;\r
bits[i - config.offset] = DemodBuffer[i];\r
\r
blockData = PackBits(0, 32, bits);\r
+ uint8_t bytes[4] = {0};\r
+ num_to_bytes(blockData, 4, bytes);\r
\r
- PrintAndLog(" %s | %08X | %s", blockNum, blockData, sprint_bin(bits,32));\r
+ PrintAndLog(" %s | %08X | %s | %s", blockNum, blockData, sprint_bin(bits,32), sprint_ascii(bytes,4));\r
}\r
\r
int special(const char *Cmd) {\r
uint32_t blockData = 0;\r
uint8_t bits[32] = {0x00};\r
\r
- PrintAndLog("OFFSET | DATA | BINARY");\r
- PrintAndLog("----------------------------------------------------");\r
+ PrintAndLog("OFFSET | DATA | BINARY | ASCII");\r
+ PrintAndLog("-------+-------+-------------------------------------+------");\r
int i,j = 0;\r
for (; j < 64; ++j){\r
\r
PrintAndLog("Bit Rate : %s", GetBitRateStr(b.bitrate) );\r
PrintAndLog("Inverted : %s", (b.inverted) ? "Yes" : "No" );\r
PrintAndLog("Offset : %d", b.offset);\r
+ PrintAndLog("Seq. Term. : %s", (b.ST) ? "Yes" : "No" );\r
PrintAndLog("Block0 : 0x%08X", b.block0);\r
PrintAndLog("");\r
return 0;\r
UsbCommand resp;\r
c.d.asBytes[0] = (page1) ? 0x2 : 0; \r
\r
- PrintAndLog("Writing to page: %d block: %d data : 0x%08X", page1, block, data);\r
+ char pwdStr[16] = {0};\r
+ snprintf(pwdStr, sizeof(pwdStr), "pwd: 0x%08X", password);\r
+ \r
+ PrintAndLog("Writing page %d block: %02d data: 0x%08X %s", page1, block, data, (usepwd) ? pwdStr : "" );\r
\r
//Password mode\r
if (usepwd) {\r
c.arg[2] = password;\r
c.d.asBytes[0] |= 0x1; \r
- PrintAndLog("pwd : 0x%08X", password);\r
}\r
clearCommandBuffer();\r
SendCommand(&c);\r
- if (!WaitForResponseTimeout(CMD_ACK, &resp, 1000)){\r
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)){\r
PrintAndLog("Error occurred, device did not ACK write operation. (May be due to old firmware)");\r
- return 0;\r
+ return 0;\r
}\r
return 1;\r
}\r
uint32_t password = 0; \r
if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') return usage_t55xx_trace();\r
\r
- if (strlen(Cmd)==0)\r
+ if (strlen(Cmd)==0) {\r
+ // sanity check.\r
+ if (!SanityOfflineCheck(FALSE)) return 1;\r
+\r
if ( !AquireData( T55x7_PAGE1, REGULAR_READ_MODE_BLOCK, pwdmode, password ) )\r
- return 0;\r
- \r
- if (!DecodeT55xxBlock()) return 0;\r
+ return 1;\r
+ }\r
\r
- if ( !DemodBufferLen) return 0;\r
+ if ( config.Q5 ){\r
+ if (!DecodeT5555TraceBlock()) return 1;\r
+ } else {\r
+ if (!DecodeT55xxBlock()) return 1;\r
+ }\r
+ \r
+ if ( !DemodBufferLen ) return 1;\r
\r
RepaintGraphWindow();\r
- uint8_t repeat = 0;\r
- if (config.offset > 5) \r
- repeat = 32;\r
- uint8_t si = config.offset+repeat;\r
- uint32_t bl1 = PackBits(si, 32, DemodBuffer);\r
- uint32_t bl2 = PackBits(si+32, 32, DemodBuffer);\r
+ uint8_t repeat = (config.offset > 5) ? 32 : 0;\r
\r
- uint32_t acl = PackBits(si, 8, DemodBuffer); si += 8;\r
- uint32_t mfc = PackBits(si, 8, DemodBuffer); si += 8;\r
- uint32_t cid = PackBits(si, 5, DemodBuffer); si += 5;\r
- uint32_t icr = PackBits(si, 3, DemodBuffer); si += 3;\r
- uint32_t year = PackBits(si, 4, DemodBuffer); si += 4;\r
- uint32_t quarter = PackBits(si, 2, DemodBuffer); si += 2;\r
- uint32_t lotid = PackBits(si, 14, DemodBuffer); si += 14;\r
- uint32_t wafer = PackBits(si, 5, DemodBuffer); si += 5;\r
- uint32_t dw = PackBits(si, 15, DemodBuffer); \r
+ uint8_t si = config.offset + repeat;\r
+ uint32_t bl1 = PackBits(si, 32, DemodBuffer);\r
+ uint32_t bl2 = PackBits(si+32, 32, DemodBuffer); \r
\r
- time_t t = time(NULL);\r
- struct tm tm = *localtime(&t);\r
- if ( year > tm.tm_year-110)\r
- year += 2000;\r
- else\r
- year += 2010;\r
+ if (config.Q5) {\r
+ uint32_t hdr = PackBits(si, 9, DemodBuffer); si += 9;\r
+ \r
+ if (hdr != 0x1FF) {\r
+ PrintAndLog("Invalid Q5 Trace data header (expected 0x1FF, found %X)", hdr);\r
+ return 1;\r
+ }\r
+ \r
+ t5555_tracedata_t data = {.bl1 = bl1, .bl2 = bl2, .icr = 0, .lotidc = '?', .lotid = 0, .wafer = 0, .dw =0};\r
+ \r
+ data.icr = PackBits(si, 2, DemodBuffer); si += 2;\r
+ data.lotidc = 'Z' - PackBits(si, 2, DemodBuffer); si += 3;\r
+ \r
+ data.lotid = PackBits(si, 4, DemodBuffer); si += 5;\r
+ data.lotid <<= 4;\r
+ data.lotid |= PackBits(si, 4, DemodBuffer); si += 5;\r
+ data.lotid <<= 4;\r
+ data.lotid |= PackBits(si, 4, DemodBuffer); si += 5;\r
+ data.lotid <<= 4;\r
+ data.lotid |= PackBits(si, 4, DemodBuffer); si += 5;\r
+ data.lotid <<= 1;\r
+ data.lotid |= PackBits(si, 1, DemodBuffer); si += 1;\r
+ \r
+ data.wafer = PackBits(si, 3, DemodBuffer); si += 4;\r
+ data.wafer <<= 2;\r
+ data.wafer |= PackBits(si, 2, DemodBuffer); si += 2;\r
+ \r
+ data.dw = PackBits(si, 2, DemodBuffer); si += 3;\r
+ data.dw <<= 4;\r
+ data.dw |= PackBits(si, 4, DemodBuffer); si += 5;\r
+ data.dw <<= 4;\r
+ data.dw |= PackBits(si, 4, DemodBuffer); si += 5;\r
+ data.dw <<= 4;\r
+ data.dw |= PackBits(si, 4, DemodBuffer); si += 5;\r
+ \r
+ printT5555Trace(data, repeat);\r
+ \r
+ } else {\r
+ \r
+ t55x7_tracedata_t data = {.bl1 = bl1, .bl2 = bl2, .acl = 0, .mfc = 0, .cid = 0, .year = 0, .quarter = 0, .icr = 0, .lotid = 0, .wafer = 0, .dw = 0};\r
+ \r
+ data.acl = PackBits(si, 8, DemodBuffer); si += 8;\r
+ if ( data.acl != 0xE0 ) {\r
+ PrintAndLog("The modulation is most likely wrong since the ACL is not 0xE0. ");\r
+ return 1;\r
+ }\r
\r
- if (config.Q5) PrintAndLog("*** Warning *** Info read off a Q5 will not work as expected");\r
- if ( acl != 0xE0 ) {\r
- PrintAndLog("The modulation is most likely wrong since the ACL is not 0xE0. ");\r
- return 0;\r
+ data.mfc = PackBits(si, 8, DemodBuffer); si += 8;\r
+ data.cid = PackBits(si, 5, DemodBuffer); si += 5;\r
+ data.icr = PackBits(si, 3, DemodBuffer); si += 3;\r
+ data.year = PackBits(si, 4, DemodBuffer); si += 4;\r
+ data.quarter = PackBits(si, 2, DemodBuffer); si += 2;\r
+ data.lotid = PackBits(si, 14, DemodBuffer); si += 14;\r
+ data.wafer = PackBits(si, 5, DemodBuffer); si += 5;\r
+ data.dw = PackBits(si, 15, DemodBuffer); \r
+\r
+ time_t t = time(NULL);\r
+ struct tm tm = *localtime(&t);\r
+ if ( data.year > tm.tm_year-110)\r
+ data.year += 2000;\r
+ else\r
+ data.year += 2010;\r
+\r
+ printT55x7Trace(data, repeat);\r
}\r
- PrintAndLog("");\r
- PrintAndLog("-- T55xx Trace Information ----------------------------------");\r
+ return 0;\r
+}\r
+\r
+void printT55x7Trace( t55x7_tracedata_t data, uint8_t repeat ){\r
+ PrintAndLog("-- T55x7 Trace Information ----------------------------------");\r
PrintAndLog("-------------------------------------------------------------");\r
- PrintAndLog(" ACL Allocation class (ISO/IEC 15963-1) : 0x%02X (%d)", acl, acl);\r
- PrintAndLog(" MFC Manufacturer ID (ISO/IEC 7816-6) : 0x%02X (%d) - %s", mfc, mfc, getTagInfo(mfc));\r
- PrintAndLog(" CID : 0x%02X (%d) - %s", cid, cid, GetModelStrFromCID(cid));\r
- PrintAndLog(" ICR IC Revision : %d",icr );\r
+ PrintAndLog(" ACL Allocation class (ISO/IEC 15963-1) : 0x%02X (%d)", data.acl, data.acl);\r
+ PrintAndLog(" MFC Manufacturer ID (ISO/IEC 7816-6) : 0x%02X (%d) - %s", data.mfc, data.mfc, getTagInfo(data.mfc));\r
+ PrintAndLog(" CID : 0x%02X (%d) - %s", data.cid, data.cid, GetModelStrFromCID(data.cid));\r
+ PrintAndLog(" ICR IC Revision : %d", data.icr );\r
PrintAndLog(" Manufactured");\r
- PrintAndLog(" Year/Quarter : %d/%d",year, quarter);\r
- PrintAndLog(" Lot ID : %d", lotid );\r
- PrintAndLog(" Wafer number : %d", wafer);\r
- PrintAndLog(" Die Number : %d", dw);\r
+ PrintAndLog(" Year/Quarter : %d/%d", data.year, data.quarter);\r
+ PrintAndLog(" Lot ID : %d", data.lotid );\r
+ PrintAndLog(" Wafer number : %d", data.wafer);\r
+ PrintAndLog(" Die Number : %d", data.dw);\r
PrintAndLog("-------------------------------------------------------------");\r
PrintAndLog(" Raw Data - Page 1");\r
- PrintAndLog(" Block 1 : 0x%08X %s", bl1, sprint_bin(DemodBuffer+config.offset+repeat,32) );\r
- PrintAndLog(" Block 2 : 0x%08X %s", bl2, sprint_bin(DemodBuffer+config.offset+repeat+32,32) );\r
- PrintAndLog("-------------------------------------------------------------");\r
+ PrintAndLog(" Block 1 : 0x%08X %s", data.bl1, sprint_bin(DemodBuffer+config.offset+repeat,32) );\r
+ PrintAndLog(" Block 2 : 0x%08X %s", data.bl2, sprint_bin(DemodBuffer+config.offset+repeat+32,32) );\r
+ PrintAndLog("-------------------------------------------------------------"); \r
\r
/*\r
TRACE - BLOCK O\r
13-17 Wafer number\r
18-32 DW, die number sequential\r
*/\r
+}\r
+\r
+void printT5555Trace( t5555_tracedata_t data, uint8_t repeat ){\r
+ PrintAndLog("-- T5555 (Q5) Trace Information -----------------------------");\r
+ PrintAndLog("-------------------------------------------------------------");\r
+ PrintAndLog(" ICR IC Revision : %d", data.icr ); \r
+ PrintAndLog(" Lot : %c%d", data.lotidc, data.lotid);\r
+ PrintAndLog(" Wafer number : %d", data.wafer);\r
+ PrintAndLog(" Die Number : %d", data.dw);\r
+ PrintAndLog("-------------------------------------------------------------");\r
+ PrintAndLog(" Raw Data - Page 1");\r
+ PrintAndLog(" Block 1 : 0x%08X %s", data.bl1, sprint_bin(DemodBuffer+config.offset+repeat,32) );\r
+ PrintAndLog(" Block 2 : 0x%08X %s", data.bl2, sprint_bin(DemodBuffer+config.offset+repeat+32,32) );\r
\r
- return 0;\r
+ /*\r
+ ** Q5 **\r
+ TRACE - BLOCK O and BLOCK1\r
+ Bits Definition HEX\r
+ 1-9 Header 0x1FF\r
+ 10-11 IC Revision\r
+ 12-13 Lot ID char\r
+ 15-35 Lot ID (NB parity)\r
+ 36-41 Wafer number (NB parity)\r
+ 42-58 DW, die number sequential (NB parity)\r
+ 60-63 Parity bits\r
+ 64 Always zero\r
+ */\r
}\r
\r
+//need to add Q5 info...\r
int CmdT55xxInfo(const char *Cmd){\r
/*\r
Page 0 Block 0 Configuration data.\r
\r
if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') return usage_t55xx_info();\r
\r
- if (strlen(Cmd)==0)\r
+ if (strlen(Cmd)==0){\r
+ // sanity check.\r
+ if (!SanityOfflineCheck(FALSE)) return 1;\r
+ \r
if ( !AquireData( T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, pwdmode, password ) )\r
return 1;\r
+ }\r
\r
if (!DecodeT55xxBlock()) return 1;\r
\r
+ // too little space to start with\r
if ( DemodBufferLen < 32) return 1;\r
\r
+ // \r
+ PrintAndLog("Offset+32 ==%d\n DemodLen == %d", config.offset + 32,DemodBufferLen );\r
+\r
uint8_t si = config.offset;\r
- uint32_t bl0 = PackBits(si, 32, DemodBuffer);\r
- \r
+ uint32_t bl0 = PackBits(si, 32, DemodBuffer); \r
uint32_t safer = PackBits(si, 4, DemodBuffer); si += 4; \r
uint32_t resv = PackBits(si, 7, DemodBuffer); si += 7;\r
uint32_t dbr = PackBits(si, 3, DemodBuffer); si += 3;\r
uint32_t fw = PackBits(si, 1, DemodBuffer); si += 1;\r
uint32_t inv = PackBits(si, 1, DemodBuffer); si += 1; \r
uint32_t por = PackBits(si, 1, DemodBuffer); si += 1;\r
+ \r
if (config.Q5) PrintAndLog("*** Warning *** Config Info read off a Q5 will not display as expected");\r
PrintAndLog("");\r
- PrintAndLog("-- T55xx Configuration & Tag Information --------------------");\r
+ PrintAndLog("-- T55x7 Configuration & Tag Information --------------------");\r
PrintAndLog("-------------------------------------------------------------");\r
PrintAndLog(" Safer key : %s", GetSaferStr(safer));\r
PrintAndLog(" reserved : %d", resv);\r
\r
int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password ){\r
// arg0 bitmodes:\r
- // bit0 = pwdmode\r
- // bit1 = page to read from\r
+ // bit0 = pwdmode\r
+ // bit1 = page to read from\r
+ // arg1: which block to read\r
+ // arg2: password\r
uint8_t arg0 = (page<<1) | pwdmode;\r
UsbCommand c = {CMD_T55XX_READ_BLOCK, {arg0, block, password}};\r
- \r
clearCommandBuffer();\r
SendCommand(&c);\r
- if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {\r
+ if ( !WaitForResponseTimeout(CMD_ACK, NULL, 2500) ) {\r
PrintAndLog("command execution time out");\r
return 0;\r
}\r
\r
- uint8_t got[12000];\r
- GetFromBigBuf(got,sizeof(got),0);\r
- WaitForResponse(CMD_ACK,NULL);\r
+ //uint8_t got[12288];\r
+ uint8_t got[7679];\r
+ GetFromBigBuf(got, sizeof(got), 0);\r
+ if ( !WaitForResponseTimeout(CMD_ACK, NULL, 8000) ) {\r
+ PrintAndLog("command execution time out");\r
+ return 0;\r
+ }\r
setGraphBuf(got, sizeof(got));\r
return 1;\r
}\r
\r
char *retStr = buf;\r
switch (id){\r
- case 0: \r
- snprintf(retStr,sizeof(buf),"%d - RF/8",id);\r
- break;\r
- case 1:\r
- snprintf(retStr,sizeof(buf),"%d - RF/16",id);\r
- break;\r
- case 2: \r
- snprintf(retStr,sizeof(buf),"%d - RF/32",id);\r
- break;\r
- case 3:\r
- snprintf(retStr,sizeof(buf),"%d - RF/40",id);\r
- break;\r
- case 4:\r
- snprintf(retStr,sizeof(buf),"%d - RF/50",id);\r
- break;\r
- case 5:\r
- snprintf(retStr,sizeof(buf),"%d - RF/64",id);\r
- break;\r
- case 6:\r
- snprintf(retStr,sizeof(buf),"%d - RF/100",id);\r
- break;\r
- case 7:\r
- snprintf(retStr,sizeof(buf),"%d - RF/128",id);\r
- break;\r
- default:\r
- snprintf(retStr,sizeof(buf),"%d - (Unknown)",id);\r
- break;\r
+ case 0: snprintf(retStr,sizeof(buf),"%d - RF/8",id); break;\r
+ case 1: snprintf(retStr,sizeof(buf),"%d - RF/16",id); break;\r
+ case 2: snprintf(retStr,sizeof(buf),"%d - RF/32",id); break;\r
+ case 3: snprintf(retStr,sizeof(buf),"%d - RF/40",id); break;\r
+ case 4: snprintf(retStr,sizeof(buf),"%d - RF/50",id); break;\r
+ case 5: snprintf(retStr,sizeof(buf),"%d - RF/64",id); break;\r
+ case 6: snprintf(retStr,sizeof(buf),"%d - RF/100",id); break;\r
+ case 7: snprintf(retStr,sizeof(buf),"%d - RF/128",id); break;\r
+ default: snprintf(retStr,sizeof(buf),"%d - (Unknown)",id); break;\r
}\r
-\r
return buf;\r
}\r
\r
char *retStr = buf;\r
\r
switch (id){\r
- case 0: \r
- snprintf(retStr,sizeof(buf),"%d - DIRECT (ASK/NRZ)",id);\r
- break;\r
- case 1:\r
- snprintf(retStr,sizeof(buf),"%d - PSK 1 phase change when input changes",id);\r
- break;\r
- case 2: \r
- snprintf(retStr,sizeof(buf),"%d - PSK 2 phase change on bitclk if input high",id);\r
- break;\r
- case 3:\r
- snprintf(retStr,sizeof(buf),"%d - PSK 3 phase change on rising edge of input",id);\r
- break;\r
- case 4:\r
- snprintf(retStr,sizeof(buf),"%d - FSK 1 RF/8 RF/5",id);\r
- break;\r
- case 5:\r
- snprintf(retStr,sizeof(buf),"%d - FSK 2 RF/8 RF/10",id);\r
- break;\r
- case 6:\r
- snprintf(retStr,sizeof(buf),"%d - FSK 1a RF/5 RF/8",id);\r
- break;\r
- case 7:\r
- snprintf(retStr,sizeof(buf),"%d - FSK 2a RF/10 RF/8",id);\r
- break;\r
- case 8:\r
- snprintf(retStr,sizeof(buf),"%d - Manchester",id);\r
- break;\r
- case 16:\r
- snprintf(retStr,sizeof(buf),"%d - Biphase",id);\r
- break;\r
- case 0x18:\r
- snprintf(retStr,sizeof(buf),"%d - Biphase a - AKA Conditional Dephase Encoding(CDP)",id);\r
- break;\r
- case 17:\r
- snprintf(retStr,sizeof(buf),"%d - Reserved",id);\r
- break;\r
- default:\r
- snprintf(retStr,sizeof(buf),"0x%02X (Unknown)",id);\r
- break;\r
+ case 0: snprintf(retStr,sizeof(buf),"%d - DIRECT (ASK/NRZ)",id); break;\r
+ case 1: snprintf(retStr,sizeof(buf),"%d - PSK 1 phase change when input changes",id); break;\r
+ case 2: snprintf(retStr,sizeof(buf),"%d - PSK 2 phase change on bitclk if input high",id); break;\r
+ case 3: snprintf(retStr,sizeof(buf),"%d - PSK 3 phase change on rising edge of input",id); break;\r
+ case 4: snprintf(retStr,sizeof(buf),"%d - FSK 1 RF/8 RF/5",id); break;\r
+ case 5: snprintf(retStr,sizeof(buf),"%d - FSK 2 RF/8 RF/10",id); break;\r
+ case 6: snprintf(retStr,sizeof(buf),"%d - FSK 1a RF/5 RF/8",id); break;\r
+ case 7: snprintf(retStr,sizeof(buf),"%d - FSK 2a RF/10 RF/8",id); break;\r
+ case 8: snprintf(retStr,sizeof(buf),"%d - Manchester",id); break;\r
+ case 16: snprintf(retStr,sizeof(buf),"%d - Biphase",id); break;\r
+ case 0x18:snprintf(retStr,sizeof(buf),"%d - Biphase a - AKA Conditional Dephase Encoding(CDP)",id); break;\r
+ case 17: snprintf(retStr,sizeof(buf),"%d - Reserved",id); break;\r
+ default: snprintf(retStr,sizeof(buf),"0x%02X (Unknown)",id); break;\r
}\r
return buf;\r
}\r
char *retStr = buf;\r
\r
switch (id){\r
- case DEMOD_FSK:\r
- snprintf(retStr,sizeof(buf),"FSK");\r
- break;\r
- case DEMOD_FSK1:\r
- snprintf(retStr,sizeof(buf),"FSK1");\r
- break;\r
- case DEMOD_FSK1a:\r
- snprintf(retStr,sizeof(buf),"FSK1a");\r
- break;\r
- case DEMOD_FSK2:\r
- snprintf(retStr,sizeof(buf),"FSK2");\r
- break;\r
- case DEMOD_FSK2a:\r
- snprintf(retStr,sizeof(buf),"FSK2a");\r
- break;\r
- case DEMOD_ASK: \r
- snprintf(retStr,sizeof(buf),"ASK");\r
- break;\r
- case DEMOD_NRZ:\r
- snprintf(retStr,sizeof(buf),"DIRECT/NRZ");\r
- break;\r
- case DEMOD_PSK1:\r
- snprintf(retStr,sizeof(buf),"PSK1");\r
- break;\r
- case DEMOD_PSK2:\r
- snprintf(retStr,sizeof(buf),"PSK2");\r
- break;\r
- case DEMOD_PSK3:\r
- snprintf(retStr,sizeof(buf),"PSK3");\r
- break;\r
- case DEMOD_BI:\r
- snprintf(retStr,sizeof(buf),"BIPHASE");\r
- break;\r
- case DEMOD_BIa:\r
- snprintf(retStr,sizeof(buf),"BIPHASEa - (CDP)");\r
- break;\r
- default:\r
- snprintf(retStr,sizeof(buf),"(Unknown)");\r
- break;\r
+ case DEMOD_FSK: snprintf(retStr,sizeof(buf),"FSK"); break;\r
+ case DEMOD_FSK1: snprintf(retStr,sizeof(buf),"FSK1"); break;\r
+ case DEMOD_FSK1a: snprintf(retStr,sizeof(buf),"FSK1a"); break;\r
+ case DEMOD_FSK2: snprintf(retStr,sizeof(buf),"FSK2"); break;\r
+ case DEMOD_FSK2a: snprintf(retStr,sizeof(buf),"FSK2a"); break;\r
+ case DEMOD_ASK: snprintf(retStr,sizeof(buf),"ASK"); break;\r
+ case DEMOD_NRZ: snprintf(retStr,sizeof(buf),"DIRECT/NRZ"); break;\r
+ case DEMOD_PSK1: snprintf(retStr,sizeof(buf),"PSK1"); break;\r
+ case DEMOD_PSK2: snprintf(retStr,sizeof(buf),"PSK2"); break;\r
+ case DEMOD_PSK3: snprintf(retStr,sizeof(buf),"PSK3"); break;\r
+ case DEMOD_BI: snprintf(retStr,sizeof(buf),"BIPHASE"); break;\r
+ case DEMOD_BIa: snprintf(retStr,sizeof(buf),"BIPHASEa - (CDP)"); break;\r
+ default: snprintf(retStr,sizeof(buf),"(Unknown)"); break;\r
}\r
return buf;\r
}\r
\r
void t55x7_create_config_block( int tagtype ){\r
- //switch?\r
- \r
- \r
-}\r
\r
-/*\r
-uint32_t PackBits(uint8_t start, uint8_t len, uint8_t* bits){\r
+ /*\r
+ T55X7_DEFAULT_CONFIG_BLOCK, T55X7_RAW_CONFIG_BLOCK\r
+ T55X7_EM_UNIQUE_CONFIG_BLOCK, T55X7_FDXB_CONFIG_BLOCK,\r
+ T55X7_FDXB_CONFIG_BLOCK, T55X7_HID_26_CONFIG_BLOCK, T55X7_INDALA_64_CONFIG_BLOCK, T55X7_INDALA_224_CONFIG_BLOCK \r
+ T55X7_GUARDPROXII_CONFIG_BLOCK, T55X7_VIKING_CONFIG_BLOCK, T55X7_NORALYS_CONFIG_BLOCK, T55X7_IOPROX_CONFIG_BLOCK \r
+ */\r
+ static char buf[60];\r
+ char *retStr = buf;\r
\r
- int i = start;\r
- int j = len-1;\r
-\r
- if (len > 32) return 0;\r
-\r
- uint32_t tmp = 0;\r
- for (; j >= 0; --j, ++i)\r
- tmp |= bits[i] << j;\r
-\r
- return tmp;\r
+ switch (tagtype){\r
+ case 0: snprintf(retStr, sizeof(buf),"%08X - T55X7 Default", T55X7_DEFAULT_CONFIG_BLOCK); break;\r
+ case 1: snprintf(retStr, sizeof(buf),"%08X - T55X7 Raw", T55X7_RAW_CONFIG_BLOCK); break;\r
+ case 2: snprintf(retStr, sizeof(buf),"%08X - T5555 Q5 Default", T5555_DEFAULT_CONFIG_BLOCK); break;\r
+ default:\r
+ break;\r
+ }\r
+ PrintAndLog(buf);\r
}\r
-*/\r
\r
int CmdResetRead(const char *Cmd) {\r
UsbCommand c = {CMD_T55XX_RESET_READ, {0,0,0}};\r
-\r
clearCommandBuffer();\r
SendCommand(&c);\r
- if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {\r
+ if ( !WaitForResponseTimeout(CMD_ACK, NULL, 2500) ) {\r
PrintAndLog("command execution time out");\r
return 0;\r
}\r
setGraphBuf(got, sizeof(got));\r
return 1;\r
}\r
-\r
+// ADD T5555 (Q5) Default config block\r
int CmdT55xxWipe(const char *Cmd) {\r
char writeData[20] = {0};\r
char *ptrData = writeData;\r
- uint8_t blk = 0;\r
+ char cmdp = param_getchar(Cmd, 0); \r
+ if ( cmdp == 'h' || cmdp == 'H') return usage_t55xx_wipe();\r
+\r
+ bool Q5 = (cmdp == 'q' || cmdp == 'Q');\r
+\r
+ // Try with the default password to reset block 0\r
+ // With a pwd should work even if pwd bit not set\r
PrintAndLog("\nBeginning Wipe of a T55xx tag (assuming the tag is not password protected)\n");\r
- //try with the default password to reset block 0 (with a pwd should work even if pwd bit not set)\r
- snprintf(ptrData,sizeof(writeData),"b %d d 00088040 p 0", blk);\r
- if (!CmdT55xxWriteBlock(ptrData)){\r
- PrintAndLog("Error writing blk %d", blk);\r
- }\r
- blk = 1;\r
- for (; blk<8; blk++) {\r
+ \r
+ if ( Q5 )\r
+ snprintf(ptrData,sizeof(writeData),"b 0 d 6001F004 p 0");\r
+ else\r
+ snprintf(ptrData,sizeof(writeData),"b 0 d 000880E0 p 0");\r
+ \r
+ if (!CmdT55xxWriteBlock(ptrData)) PrintAndLog("Error writing blk 0");\r
+ \r
+ for (uint8_t blk = 1; blk<8; blk++) {\r
+ \r
snprintf(ptrData,sizeof(writeData),"b %d d 0", blk);\r
- if (!CmdT55xxWriteBlock(ptrData)){\r
- PrintAndLog("Error writing blk %d", blk);\r
+ \r
+ if (!CmdT55xxWriteBlock(ptrData)) PrintAndLog("Error writing blk %d", blk);\r
+ \r
+ memset(writeData,0x00, sizeof(writeData));\r
+ }\r
+ return 0;\r
+}\r
+\r
+bool IsCancelled(void) {\r
+ if (ukbhit()) {\r
+ int ch = getchar();\r
+ (void)ch;\r
+ printf("\naborted via keyboard!\n");\r
+ return TRUE;\r
+ }\r
+ return FALSE;\r
+}\r
+\r
+int CmdT55xxBruteForce(const char *Cmd) {\r
+ \r
+ // load a default pwd file.\r
+ char line[9];\r
+ char filename[FILE_PATH_SIZE]={0};\r
+ int keycnt = 0;\r
+ uint8_t stKeyBlock = 20;\r
+ uint8_t *keyBlock = NULL, *p = NULL;\r
+ uint32_t start_password = 0x00000000; //start password\r
+ uint32_t end_password = 0xFFFFFFFF; //end password\r
+ bool found = false;\r
+\r
+ memset(line, 0, sizeof(line));\r
+ \r
+ char cmdp = param_getchar(Cmd, 0);\r
+ if (cmdp == 'h' || cmdp == 'H') return usage_t55xx_bruteforce();\r
+\r
+ keyBlock = calloc(stKeyBlock, 4);\r
+ if (keyBlock == NULL) return 1;\r
+\r
+ if (cmdp == 'i' || cmdp == 'I') {\r
+ \r
+ int len = strlen(Cmd+2);\r
+ if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;\r
+ memcpy(filename, Cmd+2, len);\r
+ \r
+ FILE * f = fopen( filename , "r"); \r
+ if ( !f ) {\r
+ PrintAndLog("File: %s: not found or locked.", filename);\r
+ free(keyBlock);\r
+ return 1;\r
+ } \r
+ \r
+ while( fgets(line, sizeof(line), f) ){\r
+ if (strlen(line) < 8 || line[7] == '\n') continue;\r
+ \r
+ //goto next line\r
+ while (fgetc(f) != '\n' && !feof(f)) ;\r
+ \r
+ //The line start with # is comment, skip\r
+ if( line[0]=='#' ) continue;\r
+\r
+ if (!isxdigit(line[0])) {\r
+ PrintAndLog("File content error. '%s' must include 8 HEX symbols", line);\r
+ continue;\r
+ }\r
+ \r
+ line[8] = 0; \r
+ \r
+ // realloc keyblock array size.\r
+ if ( stKeyBlock - keycnt < 2) {\r
+ p = realloc(keyBlock, 4 * (stKeyBlock += 10));\r
+ if (!p) {\r
+ PrintAndLog("Cannot allocate memory for defaultKeys");\r
+ free(keyBlock);\r
+ if (f)\r
+ fclose(f);\r
+ return 2;\r
+ }\r
+ keyBlock = p;\r
+ }\r
+ // clear mem\r
+ memset(keyBlock + 4 * keycnt, 0, 4);\r
+ \r
+ num_to_bytes( strtoll(line, NULL, 16), 4, keyBlock + 4*keycnt);\r
+ \r
+ PrintAndLog("chk custom pwd[%2d] %08X", keycnt, bytes_to_num(keyBlock + 4 * keycnt, 4) ); \r
+ keycnt++; \r
+ memset(line, 0, sizeof(line));\r
+ } \r
+ if (f)\r
+ fclose(f);\r
+ \r
+ if (keycnt == 0) {\r
+ PrintAndLog("No keys found in file");\r
+ free(keyBlock);\r
+ return 1;\r
+ }\r
+ PrintAndLog("Loaded %d keys", keycnt);\r
+ \r
+ // loop\r
+ uint64_t testpwd = 0x00;\r
+ for (uint16_t c = 0; c < keycnt; ++c ) {\r
+\r
+ if ( offline ) {\r
+ printf("Device offline\n");\r
+ free(keyBlock);\r
+ return 2;\r
+ }\r
+ \r
+ if (IsCancelled()) {\r
+ free(keyBlock);\r
+ return 0;\r
+ }\r
+ \r
+ testpwd = bytes_to_num(keyBlock + 4*c, 4);\r
+\r
+ PrintAndLog("Testing %08X", testpwd);\r
+ \r
+ if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, TRUE, testpwd)) {\r
+ PrintAndLog("Acquire data from device failed. Quitting");\r
+ free(keyBlock);\r
+ return 0;\r
+ }\r
+ \r
+ found = tryDetectModulation();\r
+ if ( found ) {\r
+ PrintAndLog("Found valid password: [%08X]", testpwd);\r
+ //free(keyBlock);\r
+ //return 0;\r
+ } \r
+ }\r
+ PrintAndLog("Password NOT found.");\r
+ free(keyBlock);\r
+ return 0;\r
+ }\r
+ \r
+ // Try to read Block 7, first :)\r
+ \r
+ // incremental pwd range search\r
+ start_password = param_get32ex(Cmd, 0, 0, 16);\r
+ end_password = param_get32ex(Cmd, 1, 0, 16);\r
+ \r
+ if ( start_password >= end_password ) {\r
+ free(keyBlock);\r
+ return usage_t55xx_bruteforce();\r
+ }\r
+ \r
+ PrintAndLog("Search password range [%08X -> %08X]", start_password, end_password);\r
+ \r
+ uint32_t i = start_password;\r
+\r
+ while ((!found) && (i <= end_password)){\r
+\r
+ printf(".");\r
+ fflush(stdout);\r
+ \r
+ if (IsCancelled()) {\r
+ free(keyBlock);\r
+ return 0;\r
+ }\r
+ \r
+ if (!AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, TRUE, i)) {\r
+ PrintAndLog("Acquire data from device failed. Quitting");\r
+ free(keyBlock);\r
+ return 0;\r
+ }\r
+ found = tryDetectModulation();\r
+ \r
+ if (found) break;\r
+ i++;\r
+ }\r
+ \r
+ PrintAndLog("");\r
+ \r
+ if (found)\r
+ PrintAndLog("Found valid password: [%08x]", i);\r
+ else\r
+ PrintAndLog("Password NOT found. Last tried: [%08x]", --i);\r
+\r
+ free(keyBlock);\r
+ return 0;\r
+}\r
+\r
+int tryOnePassword(uint32_t password) {\r
+ PrintAndLog("Trying password %08x", password);\r
+ if (!AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, TRUE, password)) {\r
+ PrintAndLog("Acquire data from device failed. Quitting");\r
+ return -1;\r
+ }\r
+\r
+ if (tryDetectModulation())\r
+ return 1;\r
+ else \r
+ return 0;\r
+}\r
+\r
+int CmdT55xxRecoverPW(const char *Cmd) {\r
+ int bit = 0;\r
+ uint32_t orig_password = 0x0;\r
+ uint32_t curr_password = 0x0;\r
+ uint32_t prev_password = 0xffffffff;\r
+ uint32_t mask = 0x0;\r
+ int found = 0;\r
+ char cmdp = param_getchar(Cmd, 0);\r
+ if (cmdp == 'h' || cmdp == 'H') return usage_t55xx_recoverpw();\r
+\r
+ orig_password = param_get32ex(Cmd, 0, 0x51243648, 16); //password used by handheld cloners\r
+\r
+ // first try fliping each bit in the expected password\r
+ while (bit < 32) {\r
+ curr_password = orig_password ^ ( 1 << bit );\r
+ found = tryOnePassword(curr_password);\r
+ if (found == -1) return 0;\r
+ bit++;\r
+ \r
+ if (IsCancelled()) return 0;\r
+ }\r
+\r
+ // now try to use partial original password, since block 7 should have been completely\r
+ // erased during the write sequence and it is possible that only partial password has been\r
+ // written\r
+ // not sure from which end the bit bits are written, so try from both ends \r
+ // from low bit to high bit\r
+ bit = 0;\r
+ while (bit < 32) {\r
+ mask += ( 1 << bit );\r
+ curr_password = orig_password & mask;\r
+ // if updated mask didn't change the password, don't try it again\r
+ if (prev_password == curr_password) {\r
+ bit++;\r
+ continue;\r
}\r
+ found = tryOnePassword(curr_password);\r
+ if (found == -1) return 0;\r
+ bit++;\r
+ prev_password = curr_password;\r
+ \r
+ if (IsCancelled()) return 0;\r
+ }\r
+\r
+ // from high bit to low\r
+ bit = 0;\r
+ mask = 0xffffffff;\r
+ while (bit < 32) {\r
+ mask -= ( 1 << bit );\r
+ curr_password = orig_password & mask;\r
+ // if updated mask didn't change the password, don't try it again\r
+ if (prev_password == curr_password) {\r
+ bit++;\r
+ continue;\r
+ }\r
+ found = tryOnePassword(curr_password);\r
+ if (found == -1)\r
+ return 0;\r
+ bit++;\r
+ prev_password = curr_password;\r
+ \r
+ if (IsCancelled()) return 0;\r
}\r
+\r
+ PrintAndLog("");\r
+\r
+ if (found == 1)\r
+ PrintAndLog("Found valid password: [%08x]", curr_password);\r
+ else\r
+ PrintAndLog("Password NOT found.");\r
+\r
return 0;\r
}\r
\r
-static command_t CommandTable[] =\r
-{\r
- {"help", CmdHelp, 1, "This help"},\r
- {"config", CmdT55xxSetConfig, 1, "Set/Get T55XX configuration (modulation, inverted, offset, rate)"},\r
- {"detect", CmdT55xxDetect, 0, "[1] Try detecting the tag modulation from reading the configuration block."},\r
- {"read", CmdT55xxReadBlock, 0, "b <block> p [password] [o] [1] -- Read T55xx block data. Optional [p password], [override], [page1]"},\r
- {"resetread",CmdResetRead, 0, "Send Reset Cmd then lf read the stream to attempt to identify the start of it (needs a demod and/or plot after)"},\r
- {"write", CmdT55xxWriteBlock,0, "b <block> d <data> p [password] [1] -- Write T55xx block data. Optional [p password], [page1]"},\r
- {"trace", CmdT55xxReadTrace, 0, "[1] Show T55x7 traceability data (page 1/ blk 0-1)"},\r
- {"info", CmdT55xxInfo, 0, "[1] Show T55x7 configuration data (page 0/ blk 0)"},\r
- {"dump", CmdT55xxDump, 0, "[password] [o] Dump T55xx card block 0-7. Optional [password], [override]"},\r
- {"special", special, 0, "Show block changes with 64 different offsets"},\r
- {"wakeup", CmdT55xxWakeUp, 0, "Send AOR wakeup command"},\r
- {"wipe", CmdT55xxWipe, 0, "Wipe a T55xx tag and set defaults (will destroy any data on tag)"},\r
- {NULL, NULL, 0, NULL}\r
+static command_t CommandTable[] = {\r
+ {"help", CmdHelp, 1, "This help"},\r
+ {"bruteforce", CmdT55xxBruteForce,0, "<start password> <end password> [i <*.dic>] Simple bruteforce attack to find password"},\r
+ {"config", CmdT55xxSetConfig, 1, "Set/Get T55XX configuration (modulation, inverted, offset, rate)"},\r
+ {"detect", CmdT55xxDetect, 1, "[1] Try detecting the tag modulation from reading the configuration block."},\r
+ {"dump", CmdT55xxDump, 0, "[password] [o] Dump T55xx card block 0-7. Optional [password], [override]"},\r
+ {"info", CmdT55xxInfo, 1, "[1] Show T55x7 configuration data (page 0/ blk 0)"},\r
+ {"read", CmdT55xxReadBlock, 0, "b <block> p [password] [o] [1] -- Read T55xx block data. Optional [p password], [override], [page1]"},\r
+ {"resetread", CmdResetRead, 0, "Send Reset Cmd then lf read the stream to attempt to identify the start of it (needs a demod and/or plot after)"},\r
+ {"recoverpw", CmdT55xxRecoverPW, 0, "[password] Try to recover from bad password write from a cloner. Only use on PW protected chips!"},\r
+ {"special", special, 0, "Show block changes with 64 different offsets"}, \r
+ {"trace", CmdT55xxReadTrace, 1, "[1] Show T55x7 traceability data (page 1/ blk 0-1)"},\r
+ {"wakeup", CmdT55xxWakeUp, 0, "Send AOR wakeup command"},\r
+ {"wipe", CmdT55xxWipe, 0, "[q] Wipe a T55xx tag and set defaults (will destroy any data on tag)"},\r
+ {"write", CmdT55xxWriteBlock,0, "b <block> d <data> p [password] [1] -- Write T55xx block data. Optional [p password], [page1]"},\r
+ {NULL, NULL, 0, NULL}\r
};\r
\r
-int CmdLFT55XX(const char *Cmd)\r
-{\r
- CmdsParse(CommandTable, Cmd);\r
- return 0;\r
+int CmdLFT55XX(const char *Cmd) {\r
+ clearCommandBuffer();\r
+ CmdsParse(CommandTable, Cmd);\r
+ return 0;\r
}\r
\r
-int CmdHelp(const char *Cmd)\r
-{\r
- CmdsHelp(CommandTable);\r
- return 0;\r
+int CmdHelp(const char *Cmd) {\r
+ CmdsHelp(CommandTable);\r
+ return 0;\r
}\r
projects / proxmark3-svn / blobdiff