PrintAndLog("Options :");
PrintAndLog(" <Facility-Code> : 8-bit value facility code");
PrintAndLog(" <Card Number> : 16-bit value card number");
+ PrintAndLog(" Q5 : optional - clone to Q5 (T5555) instead of T55x7 chip");
PrintAndLog("");
PrintAndLog("Sample : lf pyramid clone 123 11223");
return 0;
return 0;
}
-
// Works for 26bits.
int GetPyramidBits(uint32_t fc, uint32_t cn, uint8_t *pyramidBits) {
wiegand_add_parity(pre+80, wiegand, 24);
// add paritybits (bitsource, dest, sourcelen, paritylen, parityType (odd, even,)
- addParity(pre+8, pyramidBits+8, 112, 8, 1);
-
+ addParity(pre+8, pyramidBits+8, 102, 8, 1);
+
// add checksum
uint8_t csBuff[13];
for (uint8_t i = 0; i < 13; i++)
uint32_t crc = CRC8Maxim(csBuff, 13);
num_to_bytebits(crc, 8, pyramidBits+120);
-
return 1;
}
int CmdPyramidRead(const char *Cmd) {
CmdLFRead("s");
- getSamples("30000",false);
+ getSamples("20000", TRUE);
return CmdFSKdemodPyramid("");
}
if (strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') return usage_lf_pyramid_clone();
uint32_t facilitycode=0, cardnumber=0, fc = 0, cn = 0;
+ uint32_t blocks[5];
uint8_t i;
uint8_t bs[128];
memset(bs, 0x00, sizeof(bs));
-
- //Pyramid - compat mode, FSK2a, data rate 50, 4 data blocks
- uint32_t blocks[5] = {T55x7_MODULATION_FSK2a | T55x7_BITRATE_RF_50 | 4<<T55x7_MAXBLOCK_SHIFT, 0, 0, 0, 0};
-
-// if (param_getchar(Cmd, 3) == 'Q' || param_getchar(Cmd, 3) == 'q')
-// blocks[0] = T5555_MODULATION_FSK2 | 50<<T5555_BITRATE_SHIFT | 4<<T5555_MAXBLOCK_SHIFT;
if (sscanf(Cmd, "%u %u", &fc, &cn ) != 2) return usage_lf_pyramid_clone();
return 1;
}
+ //Pyramid - compat mode, FSK2a, data rate 50, 4 data blocks
+ blocks[0] = T55x7_MODULATION_FSK2a | T55x7_BITRATE_RF_50 | 4<<T55x7_MAXBLOCK_SHIFT;
+
+ if (param_getchar(Cmd, 3) == 'Q' || param_getchar(Cmd, 3) == 'q')
+ //t5555 (Q5) BITRATE = (RF-2)/2 (iceman)
+ blocks[0] = T5555_MODULATION_FSK2 | T5555_INVERT_OUTPUT | 50<<T5555_BITRATE_SHIFT | 4<<T5555_MAXBLOCK_SHIFT;
+
blocks[1] = bytebits_to_byte(bs,32);
blocks[2] = bytebits_to_byte(bs+32,32);
blocks[3] = bytebits_to_byte(bs+64,32);
PrintAndLog("Blk | Data ");
PrintAndLog("----+------------");
for ( i = 0; i<5; ++i )
- PrintAndLog(" %02d | %08x", i, blocks[i]);
+ PrintAndLog(" %02d | %08" PRIx32, i, blocks[i]);
UsbCommand resp;
UsbCommand c = {CMD_T55XX_WRITE_BLOCK, {0,0,0}};