static int CmdHelp(const char *Cmd);
+int usage_lf_em410x_sim(void) {
+ PrintAndLog("Simulating EM410x tag");
+ PrintAndLog("");
+ PrintAndLog("Usage: lf em 410xsim [h] <uid> <clock>");
+ PrintAndLog("Options:");
+ PrintAndLog(" h - this help");
+ PrintAndLog(" uid - uid (10 HEX symbols)");
+ PrintAndLog(" clock - clock (32|64) (optional)");
+ PrintAndLog("samples:");
+ PrintAndLog(" lf em 410xsim 0F0368568B");
+ PrintAndLog(" lf em 410xsim 0F0368568B 32");
+ return 0;
+}
+
int CmdEMdemodASK(const char *Cmd)
{
char cmdp = param_getchar(Cmd, 0);
*/
int CmdEM410xRead(const char *Cmd)
{
- uint32_t hi=0;
- uint64_t lo=0;
+ uint32_t hi = 0;
+ uint64_t lo = 0;
if(!AskEm410xDemod("", &hi, &lo, false)) return 0;
- PrintAndLog("EM410x pattern found: ");
+
printEM410x(hi, lo);
- if (hi){
- PrintAndLog ("EM410x XL pattern found");
- return 0;
- }
g_em410xid = lo;
return 1;
}
-
-int usage_lf_em410x_sim(void) {
- PrintAndLog("Simulating EM410x tag");
- PrintAndLog("");
- PrintAndLog("Usage: lf em 410xsim [h] <uid> <clock>");
- PrintAndLog("Options:");
- PrintAndLog(" h - this help");
- PrintAndLog(" uid - uid (10 HEX symbols)");
- PrintAndLog(" clock - clock (32|64) (optional)");
- PrintAndLog("samples:");
- PrintAndLog(" lf em 410xsim 0F0368568B");
- PrintAndLog(" lf em 410xsim 0F0368568B 32");
- return 0;
-}
-
// emulate an EM410X tag
int CmdEM410xSim(const char *Cmd)
{
* Changed by martin, 4000 x 4 = 16000,
* see http://www.proxmark.org/forum/viewtopic.php?pid=7235#p7235
*/
-int CmdEM410xWatch(const char *Cmd)
-{
+int CmdEM410xWatch(const char *Cmd) {
do {
if (ukbhit()) {
printf("\naborted via keyboard!\n");
break;
- }
-
+ }
CmdLFRead("s");
getSamples("6144",true);
} while (!CmdEM410xRead(""));
-
return 0;
}
}
}
if (!clk) {
- PrintAndLog("ERROR: EM4x50 - didn't find a clock");
+ if (verbose || g_debugMode) PrintAndLog("ERROR: EM4x50 - didn't find a clock");
return 0;
}
} else tol = clk/8;
// the rest will need to be manually demoded for now...
bool demodEM4x05resp(uint32_t *word) {
size_t idx = 0;
-
+ *word = 0;
if (detectASK_MAN() && doPreambleSearch( &idx ))
return setDemodBufferEM(word, idx);
return 0;
}
+int EM4x05ReadWord_ext(uint8_t addr, uint32_t pwd, bool usePwd, uint32_t *word) {
+ UsbCommand c = {CMD_EM4X_READ_WORD, {addr, pwd, usePwd}};
+ clearCommandBuffer();
+ SendCommand(&c);
+ UsbCommand resp;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 2500)){
+ PrintAndLog("Command timed out");
+ return -1;
+ }
+ if ( !downloadSamplesEM() ) {
+ return -1;
+ }
+ int testLen = (GraphTraceLen < 1000) ? GraphTraceLen : 1000;
+ if (graphJustNoise(GraphBuffer, testLen)) {
+ PrintAndLog("no tag found");
+ return -1;
+ }
+ return demodEM4x05resp(word);
+}
+
int CmdEM4x05Dump(const char *Cmd) {
uint8_t addr = 0;
uint32_t pwd = 0;
usePwd = true;
int success = 1;
+ uint32_t word = 0;
PrintAndLog("Addr | data | ascii");
PrintAndLog("-----+--------+------");
for (; addr < 16; addr++) {
+
if (addr == 2) {
if (usePwd) {
- PrintAndLog(" %02u | %08X", addr, pwd);
+ PrintAndLog(" %02u | %08X", addr, pwd, word );
} else {
PrintAndLog(" 02 | cannot read");
}
} else {
- //success &= EM4x05Read(addr, pwd, usePwd);
+ success &= EM4x05ReadWord_ext(addr, pwd, usePwd, &word);
}
}
return success;
}
-//ICEMAN; mentalnote to self: -1 is not doable for uint32_t..
+
int CmdEM4x05Read(const char *Cmd) {
- int addr, pwd;
+ uint8_t addr;
+ uint32_t pwd;
bool usePwd = false;
uint8_t ctmp = param_getchar(Cmd, 0);
if ( strlen(Cmd) == 0 || ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x05_read();
- addr = param_get8ex(Cmd, 0, -1, 10);
- pwd = param_get32ex(Cmd, 1, -1, 16);
+ addr = param_get8ex(Cmd, 0, 50, 10);
+ pwd = param_get32ex(Cmd, 1, 1, 16);
- if ( (addr > 15) || (addr < 0 ) || ( addr == -1) ) {
+ if (addr > 15) {
PrintAndLog("Address must be between 0 and 15");
return 1;
}
- if ( pwd == -1 )
- PrintAndLog("Reading address %d", addr);
+ if ( pwd == 1 ) {
+ PrintAndLog("Reading address %02u", addr);
+ }
else {
usePwd = true;
- PrintAndLog("Reading address %d | password %08X", addr, pwd);
+ PrintAndLog("Reading address %02u | password %08X", addr, pwd);
}
- UsbCommand c = {CMD_EM4X_READ_WORD, {addr, pwd, usePwd}};
- clearCommandBuffer();
- SendCommand(&c);
- UsbCommand resp;
- if (!WaitForResponseTimeout(CMD_ACK, &resp, 2500)){
- PrintAndLog("Command timed out");
- return -1;
- }
-
- if (!downloadSamplesEM())
- return -1;
-
- int testLen = (GraphTraceLen < 1000) ? GraphTraceLen : 1000;
- if (graphJustNoise(GraphBuffer, testLen)) {
- PrintAndLog("Tag not found");
- return -1;
- }
-
- //attempt demod
uint32_t word = 0;
- int isOk = demodEM4x05resp(&word);
+ int isOk = EM4x05ReadWord_ext(addr, pwd, usePwd, &word);
if (isOk)
- PrintAndLog("Got Address %02d | %08X",addr, word);
+ PrintAndLog("Address %02d | %08X - %s", addr, word, (addr > 13) ? "Lock" : "");
else
- PrintAndLog("Read failed");
-
+ PrintAndLog("Read Address %02d | failed",addr);
return isOk;
}
if ( strlen(Cmd) == 0 || ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x05_write();
bool usePwd = false;
- int addr = 16; // default to invalid address
- int data = 0xFFFFFFFF; // default to blank data
- int pwd = 0xFFFFFFFF; // default to blank password
+ uint8_t addr = 50; // default to invalid address
+ uint32_t data = 0; // default to blank data
+ uint32_t pwd = 1; // default to blank password
- addr = param_get8ex(Cmd, 0, -1, 10);
- data = param_get32ex(Cmd, 1, -1, 16);
- pwd = param_get32ex(Cmd, 2, -1, 16);
+ addr = param_get8ex(Cmd, 0, 50, 10);
+ data = param_get32ex(Cmd, 1, 0, 16);
+ pwd = param_get32ex(Cmd, 2, 1, 16);
- if ( (addr > 15) || (addr < 0 ) || ( addr == -1) ) {
+ if ( addr > 15 ) {
PrintAndLog("Address must be between 0 and 15");
return 1;
}
- if ( pwd == -1 )
+ if ( pwd == 1 )
PrintAndLog("Writing address %d data %08X", addr, data);
else {
usePwd = true;
if (!downloadSamplesEM())
return -1;
-
- //attempt demod:
//need 0 bits demoded (after preamble) to verify write cmd
uint32_t dummy = 0;
int isOk = demodEM4x05resp(&dummy);
PrintAndLog(" Pigeon: %u | Pigeon Mode is %s\n", (wordData & 0x4000000)>>26, (wordData & 0x4000000) ? "Enabled" : "Disabled");
}
-void printEM4x05info(uint8_t chipType, uint8_t cap, uint16_t custCode, uint32_t serial) {
+void printEM4x05info(uint32_t block0, uint32_t serial) {
+
+ uint8_t chipType = (block0 >> 1) & 0xF;
+ uint8_t cap = (block0 >> 5) & 3;
+ uint16_t custCode = (block0 >> 9) & 0x3FF;
+
switch (chipType) {
- case 9: PrintAndLog("\n Chip Type: %u | EM4305", chipType); break;
- case 4: PrintAndLog(" Chip Type: %u | Unknown", chipType); break;
- case 2: PrintAndLog(" Chip Type: %u | EM4469", chipType); break;
+ case 9: PrintAndLog("\n Chip Type: %u | EM4305", chipType); break;
+ case 8: PrintAndLog("\n Chip Type: %u | EM4205", chipType); break;
+ case 4: PrintAndLog(" Chip Type: %u | Unknown", chipType); break;
+ case 2: PrintAndLog(" Chip Type: %u | EM4469", chipType); break;
//add more here when known
default: PrintAndLog(" Chip Type: %u Unknown", chipType); break;
}
switch (cap) {
- case 3: PrintAndLog(" Cap Type: %u | 330pF",cap); break;
- case 2: PrintAndLog(" Cap Type: %u | %spF",cap, (chipType==2)? "75":"210"); break;
- case 1: PrintAndLog(" Cap Type: %u | 250pF",cap); break;
- case 0: PrintAndLog(" Cap Type: %u | no resonant capacitor",cap); break;
+ case 3: PrintAndLog(" Cap Type: %u | 330pF",cap); break;
+ case 2: PrintAndLog(" Cap Type: %u | %spF",cap, (chipType==2)? "75":"210"); break;
+ case 1: PrintAndLog(" Cap Type: %u | 250pF",cap); break;
+ case 0: PrintAndLog(" Cap Type: %u | no resonant capacitor",cap); break;
default: PrintAndLog(" Cap Type: %u | unknown",cap); break;
}
PrintAndLog(" Cust Code: %03u | %s", custCode, (custCode == 0x200) ? "Default": "Unknown");
- if (serial != 0) {
+ if (serial != 0)
PrintAndLog("\n Serial #: %08X\n", serial);
- }
}
-void printEM4x05ProtectionBits(uint32_t wordData) {
+void printEM4x05ProtectionBits(uint32_t word) {
for (uint8_t i = 0; i < 15; i++) {
- PrintAndLog(" Word: %02u | %s", i, (((1 << i) & wordData ) || i < 2) ? "Is Write Locked" : "Is Not Write Locked");
- if (i==14) {
- PrintAndLog(" Word: %02u | %s", i+1, (((1 << i) & wordData ) || i < 2) ? "Is Write Locked" : "Is Not Write Locked");
- }
+ PrintAndLog(" Word: %02u | %s", i, (((1 << i) & word ) || i < 2) ? "Is Write Locked" : "Is Not Write Locked");
+ if (i==14)
+ PrintAndLog(" Word: %02u | %s", i+1, (((1 << i) & word ) || i < 2) ? "Is Write Locked" : "Is Not Write Locked");
}
}
//quick test for EM4x05/EM4x69 tag
-bool EM4x05Block0Test(uint32_t *wordData) {
-// return (EM4x05ReadWord_ext(0,0,false,wordData) == 1);
- return false;
+bool EM4x05IsBlock0(uint32_t *word) {
+ return EM4x05ReadWord_ext(0, 0, FALSE, word);
}
int CmdEM4x05Info(const char *Cmd) {
- /*
+#define EM_SERIAL_BLOCK 1
+#define EM_CONFIG_BLOCK 4
+#define EM_PROT1_BLOCK 14
+#define EM_PROT2_BLOCK 15
uint32_t pwd;
- uint32_t wordData = 0;
+ uint32_t word = 0, block0 = 0, serial = 0;
bool usePwd = false;
uint8_t ctmp = param_getchar(Cmd, 0);
if ( ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x05_info();
// read word 0 (chip info)
// block 0 can be read even without a password.
- if ( !EM4x05Block0Test(&wordData) )
+ if ( !EM4x05IsBlock0(&block0) )
return -1;
- uint8_t chipType = (wordData >> 1) & 0xF;
- uint8_t cap = (wordData >> 5) & 3;
- uint16_t custCode = (wordData >> 9) & 0x3FF;
-
// read word 1 (serial #) doesn't need pwd
- wordData = 0;
- if (EM4x05ReadWord_ext(1, 0, false, &wordData) != 1) {
- //failed, but continue anyway...
- }
- printEM4x05info(chipType, cap, custCode, wordData);
+ // continue if failed, .. non blocking fail.
+ EM4x05ReadWord_ext(EM_SERIAL_BLOCK, 0, false, &serial);
+ printEM4x05info(block0, serial);
// read word 4 (config block)
// needs password if one is set
- wordData = 0;
- if ( EM4x05ReadWord_ext(4, pwd, usePwd, &wordData) != 1 )
+ if ( EM4x05ReadWord_ext(EM_CONFIG_BLOCK, pwd, usePwd, &word) != 1 )
return 0;
- printEM4x05config(wordData);
+ printEM4x05config(word);
// read word 14 and 15 to see which is being used for the protection bits
- wordData = 0;
- if ( EM4x05ReadWord_ext(14, pwd, usePwd, &wordData) != 1 ) {
+ if ( EM4x05ReadWord_ext(EM_PROT1_BLOCK, pwd, usePwd, &word) != 1 ) {
return 0;
}
// if status bit says this is not the used protection word
- if (!(wordData & 0x8000)) {
- if ( EM4x05ReadWord_ext(15, pwd, usePwd, &wordData) != 1 ) {
+ if (!(word & 0x8000)) {
+ if ( EM4x05ReadWord_ext(EM_PROT2_BLOCK, pwd, usePwd, &word) != 1 )
return 0;
- }
}
- if (!(wordData & 0x8000)) {
- //something went wrong
- return 0;
- }
- printEM4x05ProtectionBits(wordData);
-
- */
+ //something went wrong
+ if (!(word & 0x8000)) return 0;
+ printEM4x05ProtectionBits(word);
return 1;
}
projects / proxmark3-svn / blobdiff