#include "cmdhf14a.h"
#include "mifare.h"
#include "util.h"
-#include "../common/protocols.h"
+#include "protocols.h"
#include "data.h"
#define MAX_UL_BLOCKS 0x0f
static void ul_switch_on_field(void) {
UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_CONNECT | ISO14A_NO_DISCONNECT, 0, 0}};
+ clearCommandBuffer();
SendCommand(&c);
}
void ul_switch_off_field(void) {
UsbCommand c = {CMD_READER_ISO_14443a, {0, 0, 0}};
+ clearCommandBuffer();
SendCommand(&c);
}
static int ul_send_cmd_raw( uint8_t *cmd, uint8_t cmdlen, uint8_t *response, uint16_t responseLength ) {
UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_NO_DISCONNECT | ISO14A_APPEND_CRC, cmdlen, 0}};
memcpy(c.d.asBytes, cmd, cmdlen);
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
c.arg[0] |= ISO14A_APPEND_CRC;
memcpy(c.d.asBytes, cmd, cmdlen);
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
UsbCommand c = {CMD_MIFAREUC_AUTH, {switch_off_field}};
memcpy(c.d.asBytes, key, 16);
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
if ( !WaitForResponseTimeout(CMD_ACK, &resp, 1500) ) return 0;
}
static int ul_auth_select( iso14a_card_select_t *card, TagTypeUL_t tagtype, bool hasAuthKey, uint8_t *authenticationkey, uint8_t *pack, uint8_t packSize){
-
if ( hasAuthKey && (tagtype & UL_C)) {
//will select card automatically and close connection on error
if (!ulc_authentication(authenticationkey, false)) {
uid[6] = data[7];
PrintAndLog(" UID : %s ", sprint_hex(uid, 7));
- PrintAndLog(" UID[0] : %02X, Manufacturer: %s", uid[0], getTagInfo(uid[0]) );
+ PrintAndLog(" UID[0] : %02X, %s", uid[0], getTagInfo(uid[0]) );
if ( uid[0] == 0x05 ) {
uint8_t chip = (data[8] & 0xC7); // 11000111 mask, bit 3,4,5 RFU
switch (chip){
// Magic Ultralight tests
// 1) take present UID, and try to write it back. OBSOLETE
// 2) make a wrong length write to page0, and see if tag answers with ACK/NACK:
+ ul_switch_off_field();
iso14a_card_select_t card;
if ( !ul_select(&card) )
return UL_ERROR;
uint8_t blockdata[20] = {0x00};
uint8_t data[16] = {0x00};
uint8_t authenticationkey[16] = {0x00};
- uint8_t *authkeyptr = authenticationkey;
+ uint8_t *authKeyPtr = authenticationkey;
// starting with getting tagtype
TagTypeUL_t tagtype = GetHF14AMfU_Type();
uint8_t maxblockno = 0;
for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++){
if (tagtype & UL_TYPES_ARRAY[idx])
- maxblockno = UL_MEMORY_ARRAY[idx]+1;
+ maxblockno = UL_MEMORY_ARRAY[idx];
}
if (blockNo < 0) {
errors = true;
}
if (blockNo > maxblockno){
- PrintAndLog("block number to large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
+ PrintAndLog("block number too large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
errors = true;
}
cmdp += 2;
if ( blockNo == -1 ) return usage_hf_mfu_wrbl();
// Swap endianness
- if (swapEndian && hasAuthKey) authkeyptr = SwapEndian64(authenticationkey, 16, 8);
- if (swapEndian && hasPwdKey) authkeyptr = SwapEndian64(authenticationkey, 4, 4);
-
+ if (swapEndian && hasAuthKey) authKeyPtr = SwapEndian64(authenticationkey, 16, 8);
+ if (swapEndian && hasPwdKey) authKeyPtr = SwapEndian64(authenticationkey, 4, 4);
if ( blockNo <= 3)
PrintAndLog("Special Block: %0d (0x%02X) [ %s]", blockNo, blockNo, sprint_hex(blockdata, 4));
else
PrintAndLog("Block: %0d (0x%02X) [ %s]", blockNo, blockNo, sprint_hex(blockdata, 4));
-
-
//Send write Block
UsbCommand c = {CMD_MIFAREU_WRITEBL, {blockNo}};
memcpy(c.d.asBytes,blockdata,4);
if ( hasAuthKey ){
c.arg[1] = 1;
- memcpy(c.d.asBytes+4,authkeyptr,16);
+ memcpy(c.d.asBytes+4,authKeyPtr,16);
}
else if ( hasPwdKey ) {
c.arg[1] = 2;
- memcpy(c.d.asBytes+4,authkeyptr,4);
+ memcpy(c.d.asBytes+4,authKeyPtr,4);
}
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
uint8_t keylen = 0;
uint8_t data[16] = {0x00};
uint8_t authenticationkey[16] = {0x00};
- uint8_t *authkeyptr = authenticationkey;
-
+ uint8_t *authKeyPtr = authenticationkey;
+
// starting with getting tagtype
TagTypeUL_t tagtype = GetHF14AMfU_Type();
if (tagtype == UL_ERROR) return -1;
uint8_t maxblockno = 0;
for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++){
if (tagtype & UL_TYPES_ARRAY[idx])
- maxblockno = UL_MEMORY_ARRAY[idx]+1;
+ maxblockno = UL_MEMORY_ARRAY[idx];
}
if (blockNo < 0) {
//Validations
if(errors) return usage_hf_mfu_rdbl();
}
+
if ( blockNo == -1 ) return usage_hf_mfu_rdbl();
// Swap endianness
- if (swapEndian && hasAuthKey) authkeyptr = SwapEndian64(authenticationkey, 16, 8);
- if (swapEndian && hasPwdKey) authkeyptr = SwapEndian64(authenticationkey, 4, 4);
+ if (swapEndian && hasAuthKey) authKeyPtr = SwapEndian64(authenticationkey, 16, 8);
+ if (swapEndian && hasPwdKey) authKeyPtr = SwapEndian64(authenticationkey, 4, 4);
//Read Block
UsbCommand c = {CMD_MIFAREU_READBL, {blockNo}};
if ( hasAuthKey ){
c.arg[1] = 1;
- memcpy(c.d.asBytes,authkeyptr,16);
+ memcpy(c.d.asBytes,authKeyPtr,16);
}
else if ( hasPwdKey ) {
c.arg[1] = 2;
- memcpy(c.d.asBytes,authkeyptr,4);
+ memcpy(c.d.asBytes,authKeyPtr,4);
}
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
uint8_t isOK = resp.arg[0] & 0xff;
if (isOK) {
uint8_t *data = resp.d.asBytes;
- PrintAndLog("Block: %0d (0x%02X) [ %s]", blockNo, blockNo, sprint_hex(data, 4));
+ PrintAndLog("\nBlock# | Data | Ascii");
+ PrintAndLog("-----------------------------");
+ PrintAndLog("%02d/0x%02X | %s| %.4s\n", blockNo, blockNo, sprint_hex(data, 4), data);
}
else {
PrintAndLog("Failed reading block: (%02x)", isOK);
} else {
PrintAndLog("Command execute time-out");
}
-
return 0;
}
//
// Mifare Ultralight / Ultralight-C / Ultralight-EV1
// Read and Dump Card Contents, using auto detection of tag size.
-//
-// TODO: take a password to read UL-C / UL-EV1 tags.
int CmdHF14AMfUDump(const char *Cmd){
FILE *fout;
TagTypeUL_t tagtype = GetHF14AMfU_Type();
if (tagtype == UL_ERROR) return -1;
- if (!manualPages)
+ if (!manualPages) //get number of pages to read
for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++)
if (tagtype & UL_TYPES_ARRAY[idx])
- Pages = UL_MEMORY_ARRAY[idx]+1;
+ Pages = UL_MEMORY_ARRAY[idx]+1; //add one as maxblks starts at 0
ul_print_type(tagtype, 0);
PrintAndLog("Reading tag memory...");
memcpy(c.d.asBytes, authKeyPtr, dataLen);
}
+
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
if (!WaitForResponseTimeout(CMD_ACK, &resp,1500)) {
}
}
- PrintAndLog("Block# Data lck Ascii");
- PrintAndLog("----------------------------------");
+ PrintAndLog("\nBlock# | Data |lck| Ascii");
+ PrintAndLog("---------------------------------");
for (i = 0; i < Pages; ++i) {
if ( i < 3 ) {
- PrintAndLog("%02d/0x%02X | %s | |", i, i,sprint_hex(data + i * 4, 4));
+ PrintAndLog("%02d/0x%02X | %s| | ", i+startPage, i+startPage, sprint_hex(data + i * 4, 4));
continue;
}
switch(i){
case 43: tmplockbit = bit2[9]; break; //auth1
default: break;
}
- PrintAndLog("%02d/0x%02X | %s |%d| %.4s",i , i, sprint_hex(data + i * 4, 4), tmplockbit, data+i*4);
+ PrintAndLog("%02d/0x%02X | %s| %d | %.4s", i+startPage, i+startPage, sprint_hex(data + i * 4, 4), tmplockbit, data+i*4);
}
- PrintAndLog("----------------------------------");
+ PrintAndLog("---------------------------------");
// user supplied filename?
if (fileNlen < 1) {
UsbCommand c = {CMD_MIFAREUC_SETPWD};
memcpy( c.d.asBytes, pwd, 16);
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
// read block2.
c.cmd = CMD_MIFAREU_READBL;
c.arg[0] = 2;
+ clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
PrintAndLog("Command execute timeout");
c.d.asBytes[1] = uid[1];
c.d.asBytes[2] = uid[2];
c.d.asBytes[3] = 0x88 ^ uid[0] ^ uid[1] ^ uid[2];
+ clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
PrintAndLog("Command execute timeout");
c.d.asBytes[1] = uid[4];
c.d.asBytes[2] = uid[5];
c.d.asBytes[3] = uid[6];
+ clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK,&resp,1500) ) {
PrintAndLog("Command execute timeout");
c.d.asBytes[1] = oldblock2[1];
c.d.asBytes[2] = oldblock2[2];
c.d.asBytes[3] = oldblock2[3];
+ clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK,&resp,1500) ) {
PrintAndLog("Command execute timeout");
{"help", CmdHelp, 1, "This help"},
{"dbg", CmdHF14AMfDbg, 0, "Set default debug mode"},
{"info", CmdHF14AMfUInfo, 0, "Tag information"},
- {"dump", CmdHF14AMfUDump, 0, "Dump Ultralight / Ultralight-C tag to binary file"},
+ {"dump", CmdHF14AMfUDump, 0, "Dump Ultralight / Ultralight-C / NTAG tag to binary file"},
{"rdbl", CmdHF14AMfURdBl, 0, "Read block"},
{"wrbl", CmdHF14AMfUWrBl, 0, "Write block"},
{"cauth", CmdHF14AMfucAuth, 0, "Authentication - Ultralight C"},
projects / proxmark3-svn / blobdiff