]> git.zerfleddert.de Git - proxmark3-svn/blobdiff - armsrc/lfops.c
add: iceman1001's idea to reuse @pwpiwi's fast select without anticollision to speedu...
[proxmark3-svn] / armsrc / lfops.c
index 2079f263d5396007d3b4f37b048ff3a15e78ddf5..75aa134240aedffa1eb5b73f4482a76920ef637f 100644 (file)
@@ -403,6 +403,7 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
                //wait until SSC_CLK goes HIGH
                while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
                        if(BUTTON_PRESS() || (usb_poll_validate_length() )) {
+                               FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
                                DbpString("Stopped");
                                return;
                        }
@@ -420,8 +421,9 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
                        LED_D_OFF();
                //wait until SSC_CLK goes LOW
                while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
-                       if(BUTTON_PRESS()) {
+                       if(BUTTON_PRESS() || (usb_poll_validate_length() )) {
                                DbpString("Stopped");
+                               FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
                                return;
                        }
                        WDT_HIT();
@@ -436,6 +438,7 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
                                SpinDelayUs(gap);
                        }
                }
+
        }
 }
 
@@ -681,7 +684,7 @@ void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
                for (i=0; i<size; i++){
                        askSimBit(BitStream[i]^invert, &n, clk, encoding);
                }
-               if (encoding==0 && BitStream[0]==BitStream[size-1]){ //run a second set inverted (for biphase phase)
+               if (encoding==0 && BitStream[0]==BitStream[size-1]){ //run a second set inverted (for ask/raw || biphase phase)
                        for (i=0; i<size; i++){
                                askSimBit(BitStream[i]^invert^1, &n, clk, encoding);
                        }
@@ -840,13 +843,15 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
                                if (ledcontrol) LED_A_OFF();
                                *high = hi;
                                *low = lo;
-                               return;
+                               break;
                        }
                        // reset
                }
                hi2 = hi = lo = idx = 0;
                WDT_HIT();
        }
+
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        DbpString("Stopped");
        if (ledcontrol) LED_A_OFF();
 }
@@ -931,12 +936,13 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
                }
                if (findone){
                        if (ledcontrol) LED_A_OFF();
-                       return;
+                       break;
                }
                // reset
                idx = 0;
                WDT_HIT();
        }
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        DbpString("Stopped");
        if (ledcontrol) LED_A_OFF();
 }
@@ -991,13 +997,14 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
                                if (ledcontrol) LED_A_OFF();
                                *high=lo>>32;
                                *low=lo & 0xFFFFFFFF;
-                               return;
+                               break;
                        }
                }
                WDT_HIT();
                hi = lo = size = idx = 0;
                clk = invert = errCnt = 0;
        }
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        DbpString("Stopped");
        if (ledcontrol) LED_A_OFF();
 }
@@ -1056,7 +1063,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
                        //LED_A_OFF();
                        *high=code;
                        *low=code2;
-                       return;
+                       break;
                }
                code=code2=0;
                version=facilitycode=0;
@@ -1065,6 +1072,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
 
                WDT_HIT();
        }
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        DbpString("Stopped");
        if (ledcontrol) LED_A_OFF();
 }
@@ -1350,7 +1358,7 @@ void CopyIndala224toT55x7(uint32_t uid1, uint32_t uid2, uint32_t uid3, uint32_t
        //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7)
        data[0] = T55x7_BITRATE_RF_32 | T55x7_MODULATION_PSK1 | (7 << T55x7_MAXBLOCK_SHIFT);
        //TODO add selection of chip for Q5 or T55x7
-       // data[0] = (((32-2)/2)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_PSK1 | 7 << T5555_MAXBLOCK_SHIFT;
+       // data[0] = (((32-2)>>1)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_PSK1 | 7 << T5555_MAXBLOCK_SHIFT;
        WriteT55xx(data, 0, 8);
        //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
        //      T5567WriteBlock(0x603E10E2,0);
@@ -1359,7 +1367,7 @@ void CopyIndala224toT55x7(uint32_t uid1, uint32_t uid2, uint32_t uid3, uint32_t
 // clone viking tag to T55xx
 void CopyVikingtoT55xx(uint32_t block1, uint32_t block2, uint8_t Q5) {
        uint32_t data[] = {T55x7_BITRATE_RF_32 | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT), block1, block2};
-       if (Q5) data[0] = (32 << T5555_BITRATE_SHIFT) | T5555_MODULATION_MANCHESTER | 2 << T5555_MAXBLOCK_SHIFT;
+       if (Q5) data[0] = ( ((32-2)>>1) << T5555_BITRATE_SHIFT) | T5555_MODULATION_MANCHESTER | 2 << T5555_MAXBLOCK_SHIFT;
        // Program the data blocks for supplied ID and the block 0 config
        WriteT55xx(data, 0, 3);
        LED_D_OFF();
@@ -1563,29 +1571,27 @@ void SendForward(uint8_t fwd_bit_count) {
        fwd_write_ptr = forwardLink_data;
        fwd_bit_sz = fwd_bit_count;
 
-       LED_D_ON();
-
-       // Set up FPGA, 125kHz
+       // Set up FPGA, 125kHz or 95 divisor
        LFSetupFPGAForADC(95, true);
 
        // force 1st mod pulse (start gap must be longer for 4305)
        fwd_bit_sz--; //prepare next bit modulation
        fwd_write_ptr++;
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
-       SpinDelayUs(55*8); //55 cycles off (8us each)for 4305
+       WaitUS(55*8); //55 cycles off (8us each)for 4305  //another reader has 37 here...
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
-       SpinDelayUs(16*8); //16 cycles on (8us each)
+       WaitUS(18*8); //18 cycles on (8us each)
 
        // now start writting
        while(fwd_bit_sz-- > 0) { //prepare next bit modulation
                if(((*fwd_write_ptr++) & 1) == 1)
-                       SpinDelayUs(32*8); //32 cycles at 125Khz (8us each)
+                       WaitUS(32*8); //32 cycles at 125Khz (8us each)
                else {
                        //These timings work for 4469/4269/4305 (with the 55*8 above)
                        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
-                       SpinDelayUs(23*8); //16-4 cycles off (8us each)
+                       WaitUS(23*8); //23 cycles off (8us each)
                        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
-                       SpinDelayUs(9*8); //16 cycles on (8us each)
+                       WaitUS(18*8); //18 cycles on (8us each)
                }
        }
 }
@@ -1607,13 +1613,12 @@ void EM4xLogin(uint32_t Password) {
 void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
 
        uint8_t fwd_bit_count;
-       uint8_t *dest = BigBuf_get_addr();
-       uint16_t bufferlength = BigBuf_max_traceLen();
-       uint32_t i = 0;
 
        // Clear destination buffer before sending the command
        BigBuf_Clear_ext(false);
 
+       LED_A_ON();
+       StartTicks();
        //If password mode do login
        if (PwdMode == 1) EM4xLogin(Pwd);
 
@@ -1621,36 +1626,29 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
        fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
        fwd_bit_count += Prepare_Addr( Address );
 
-       // Connect the A/D to the peak-detected low-frequency path.
-       SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-       // Now set up the SSC to get the ADC samples that are now streaming at us.
-       FpgaSetupSsc();
-
        SendForward(fwd_bit_count);
-
+       WaitUS(400);
        // Now do the acquisition
-       i = 0;
-       for(;;) {
-               if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
-                       AT91C_BASE_SSC->SSC_THR = 0x43;
-               }
-               if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
-                       dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-                       i++;
-                       if (i >= bufferlength) break;
-               }
-       }
+       DoPartialAcquisition(20, true, 6000);
+       
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+       LED_A_OFF();
        cmd_send(CMD_ACK,0,0,0,0,0);
-       LED_D_OFF();
 }
 
-void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
-
+void EM4xWriteWord(uint32_t flag, uint32_t Data, uint32_t Pwd) {
+       
+       bool PwdMode = (flag & 0xF);
+       uint8_t Address = (flag >> 8) & 0xFF;
        uint8_t fwd_bit_count;
 
+       //clear buffer now so it does not interfere with timing later
+       BigBuf_Clear_ext(false);
+
+       LED_A_ON();
+       StartTicks();
        //If password mode do login
-       if (PwdMode == 1) EM4xLogin(Pwd);
+       if (PwdMode) EM4xLogin(Pwd);
 
        forward_ptr = forwardLink_data;
        fwd_bit_count = Prepare_Cmd( FWD_CMD_WRITE );
@@ -1660,7 +1658,72 @@ void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode
        SendForward(fwd_bit_count);
 
        //Wait for write to complete
-       SpinDelay(20);
+       //SpinDelay(10);
+
+       WaitUS(6500);
+       //Capture response if one exists
+       DoPartialAcquisition(20, true, 6000);
+
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
-       LED_D_OFF();
+       LED_A_OFF();
+       cmd_send(CMD_ACK,0,0,0,0,0);
+}
+/*
+Reading a COTAG.
+
+COTAG needs the reader to send a startsequence and the card has an extreme slow datarate.
+because of this, we can "sample" the data signal but we interpreate it to Manchester direct.
+
+READER START SEQUENCE:
+burst 800 us,    gap   2.2 msecs
+burst 3.6 msecs  gap   2.2 msecs
+burst 800 us     gap   2.2 msecs
+pulse 3.6 msecs
+
+This triggers a COTAG tag to response
+*/
+void Cotag(uint32_t arg0) {
+
+#define OFF     { FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); WaitUS(2035); }
+#define ON(x)   { FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); WaitUS((x)); }
+
+       uint8_t rawsignal = arg0 & 0xF;
+
+       LED_A_ON();
+
+       // Switching to LF image on FPGA. This might empty BigBuff
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
+       //clear buffer now so it does not interfere with timing later
+       BigBuf_Clear_ext(false);
+
+       // Set up FPGA, 132kHz to power up the tag
+       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 89);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+
+       // Connect the A/D to the peak-detected low-frequency path.
+       SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
+
+       // Now set up the SSC to get the ADC samples that are now streaming at us.
+       FpgaSetupSsc();
+
+       // start clock - 1.5ticks is 1us
+       StartTicks();
+
+       //send COTAG start pulse
+       ON(740)  OFF
+       ON(3330) OFF
+       ON(740)  OFF
+       ON(1000)
+
+       switch(rawsignal) {
+               case 0: doCotagAcquisition(50000); break;
+               case 1: doCotagAcquisitionManchester(); break;
+               case 2: DoAcquisition_config(TRUE); break;
+       }
+
+       // Turn the field off
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+       cmd_send(CMD_ACK,0,0,0,0,0);
+       LED_A_OFF();
 }
Impressum, Datenschutz