//-----------------------------------------------------------------------------
-// Definitions of interest to most of the software for this project.
// Jonathan Westhues, Mar 2006
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// Hardware and interface definitions
//-----------------------------------------------------------------------------
#ifndef __PROXMARK3_H
#define __PROXMARK3_H
// Might as well have the hardware-specific defines everywhere.
-#include <at91sam7s512.h>
-#include <config_gpio.h>
+#include "at91sam7s512.h"
+#include "config_gpio.h"
#define WDT_HIT() AT91C_BASE_WDTC->WDTC_WDCR = 0xa5000001
#define PWM_CH_MODE_PRESCALER(x) ((x)<<0)
#define PWM_CHANNEL(x) (1<<(x))
-#define TC_CMR_TCCLKS_TIMER_CLOCK1 (0<<0)
-#define TC_CMR_TCCLKS_TIMER_CLOCK2 (1<<0)
-#define TC_CMR_TCCLKS_TIMER_CLOCK3 (2<<0)
-#define TC_CMR_TCCLKS_TIMER_CLOCK4 (3<<0)
-#define TC_CMR_TCCLKS_TIMER_CLOCK5 (4<<0)
-
#define ADC_CHAN_LF 4
#define ADC_CHAN_HF 5
#define ADC_MODE_PRESCALE(x) ((x)<<8)
#define SSC_FRAME_MODE_BITS_IN_WORD(x) (((x)-1)<<0)
#define MC_FLASH_COMMAND_KEY ((0x5a)<<24)
-#define MC_FLASH_STATUS_READY (1<<0)
-#define MC_FLASH_STATUS_LOCKE (1<<2)
-#define MC_FLASH_STATUS_PROGE (1<<3)
#define MC_FLASH_MODE_FLASH_WAIT_STATES(x) ((x)<<8)
-#define MC_FLASH_MODE_MASTER_CLK_IN_MHZ(x) ((x)<<16)
+#define MC_FLASH_MODE_MASTER_CLK_IN_MHZ(x) (((x)+((x)/2))<<16)
#define MC_FLASH_COMMAND_PAGEN(x) ((x)<<8)
#define RST_CONTROL_KEY (0xa5<<24)
-#define PMC_MAIN_OSC_ENABLE (1<<0)
-#define PMC_MAIN_OSC_STABILIZED (1<<0)
-#define PMC_MAIN_OSC_PLL_LOCK (1<<2)
-#define PMC_MAIN_OSC_MCK_READY (1<<3)
-
#define PMC_MAIN_OSC_STARTUP_DELAY(x) ((x)<<8)
#define PMC_PLL_DIVISOR(x) (x)
-#define PMC_CLK_PRESCALE_DIV_2 (1<<2)
#define PMC_PLL_MULTIPLIER(x) (((x)-1)<<16)
#define PMC_PLL_COUNT_BEFORE_LOCK(x) ((x)<<8)
#define PMC_PLL_FREQUENCY_RANGE(x) ((x)<<14)
#define UDP_CSR_BYTES_RECEIVED(x) (((x) >> 16) & 0x7ff)
//**************************************************************
-#define LOW(x) AT91C_BASE_PIOA->PIO_CODR = (x)
-#define HIGH(x) AT91C_BASE_PIOA->PIO_SODR = (x)
+#define LOW(x) AT91C_BASE_PIOA->PIO_CODR = (x)
+#define HIGH(x) AT91C_BASE_PIOA->PIO_SODR = (x)
+#define GETBIT(x) (AT91C_BASE_PIOA->PIO_ODSR & (x)) ? 1:0
+#define SETBIT(x, y) (y) ? (HIGH(x)):(LOW(x))
+#define INVBIT(x) SETBIT((x), !(GETBIT(x)))
#define SPI_FPGA_MODE 0
#define SPI_LCD_MODE 1
-typedef unsigned long DWORD;
-typedef signed long SDWORD;
-typedef unsigned long long QWORD;
-typedef int BOOL;
-typedef unsigned char BYTE;
-typedef signed char SBYTE;
-typedef unsigned short WORD;
-typedef signed short SWORD;
#define TRUE 1
#define FALSE 0
#define LED_A_ON() HIGH(GPIO_LED_A)
#define LED_A_OFF() LOW(GPIO_LED_A)
+#define LED_A_INV() INVBIT(GPIO_LED_A)
#define LED_B_ON() HIGH(GPIO_LED_B)
#define LED_B_OFF() LOW(GPIO_LED_B)
+#define LED_B_INV() INVBIT(GPIO_LED_B)
#define LED_C_ON() HIGH(GPIO_LED_C)
#define LED_C_OFF() LOW(GPIO_LED_C)
+#define LED_C_INV() INVBIT(GPIO_LED_C)
#define LED_D_ON() HIGH(GPIO_LED_D)
#define LED_D_OFF() LOW(GPIO_LED_D)
+#define LED_D_INV() INVBIT(GPIO_LED_D)
#define RELAY_ON() HIGH(GPIO_RELAY)
#define RELAY_OFF() LOW(GPIO_RELAY)
#define BUTTON_PRESS() !(AT91C_BASE_PIOA->PIO_PDSR & GPIO_BUTTON)
//--------------------------------
// USB declarations
-void UsbSendPacket(BYTE *packet, int len);
-BOOL UsbConnected();
-BOOL UsbPoll(BOOL blinkLeds);
+void UsbSendPacket(uint8_t *packet, int len);
+int UsbConnected();
+int UsbPoll(int blinkLeds);
void UsbStart(void);
// This function is provided by the apps/bootrom, and called from UsbPoll
// if data are available.
-void UsbPacketReceived(BYTE *packet, int len);
+void UsbPacketReceived(uint8_t *packet, int len);
#define VERSION_INFORMATION_MAGIC 0x56334d50
struct version_information {