#define ISO14443B_COMPLETION 0x0F
#define ISO14443B_AUTHENTICATE 0x0A
-//First byte is 26
-#define ISO15693_INVENTORY 0x01
-#define ISO15693_STAYQUIET 0x02
-//First byte is 02
-#define ISO15693_READBLOCK 0x20
-#define ISO15693_WRITEBLOCK 0x21
-#define ISO15693_LOCKBLOCK 0x22
-#define ISO15693_READ_MULTI_BLOCK 0x23
-#define ISO15693_SELECT 0x25
-#define ISO15693_RESET_TO_READY 0x26
-#define ISO15693_WRITE_AFI 0x27
-#define ISO15693_LOCK_AFI 0x28
-#define ISO15693_WRITE_DSFID 0x29
-#define ISO15693_LOCK_DSFID 0x2A
-#define ISO15693_GET_SYSTEM_INFO 0x2B
-#define ISO15693_READ_MULTI_SECSTATUS 0x2C
+// ISO15693 COMMANDS
+#define ISO15693_INVENTORY 0x01
+#define ISO15693_STAYQUIET 0x02
+#define ISO15693_READBLOCK 0x20
+#define ISO15693_WRITEBLOCK 0x21
+#define ISO15693_LOCKBLOCK 0x22
+#define ISO15693_READ_MULTI_BLOCK 0x23
+#define ISO15693_SELECT 0x25
+#define ISO15693_RESET_TO_READY 0x26
+#define ISO15693_WRITE_AFI 0x27
+#define ISO15693_LOCK_AFI 0x28
+#define ISO15693_WRITE_DSFID 0x29
+#define ISO15693_LOCK_DSFID 0x2A
+#define ISO15693_GET_SYSTEM_INFO 0x2B
+#define ISO15693_READ_MULTI_SECSTATUS 0x2C
+
+// ISO15693 REQUEST FLAGS
+#define ISO15693_REQ_SUBCARRIER_TWO (1<<0)
+#define ISO15693_REQ_DATARATE_HIGH (1<<1)
+#define ISO15693_REQ_INVENTORY (1<<2)
+#define ISO15693_REQ_PROTOCOL_EXT (1<<3) // RFU
+#define ISO15693_REQ_OPTION (1<<6) // Command specific option selector
+// when REQ_INVENTORY is not set
+#define ISO15693_REQ_SELECT (1<<4) // only selected cards response
+#define ISO15693_REQ_ADDRESS (1<<5) // this req contains an address
+// when REQ_INVENTORY is set
+#define ISO15693_REQINV_AFI (1<<4) // AFI Field is present
+#define ISO15693_REQINV_SLOT1 (1<<5) // 1 Slot (16 slots if not set)
+
+// ISO15693 RESPONSE FLAGS
+#define ISO15693_RES_ERROR (1<<0)
+#define ISO15693_RES_EXT (1<<3) // Protocol Extention
+
+// ISO15693 RESPONSE ERROR CODES
+#define ISO15693_NOERROR 0x00
+#define ISO15693_ERROR_CMD_NOT_SUP 0x01 // Command not supported
+#define ISO15693_ERROR_CMD_NOT_REC 0x02 // Command not recognized (eg. parameter error)
+#define ISO15693_ERROR_CMD_OPTION 0x03 // Command option not supported
+#define ISO15693_ERROR_GENERIC 0x0F // No additional Info about this error
+#define ISO15693_ERROR_BLOCK_UNAVAILABLE 0x10
+#define ISO15693_ERROR_BLOCK_LOCKED_ALREADY 0x11 // cannot lock again
+#define ISO15693_ERROR_BLOCK_LOCKED 0x12 // cannot be changed
+#define ISO15693_ERROR_BLOCK_WRITE 0x13 // Writing was unsuccessful
+#define ISO15693_ERROR_BLOCL_WRITELOCK 0x14 // Locking was unsuccessful
// Topaz command set:
#define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes)
-#define ISO_14443A 0
-#define ICLASS 1
-#define ISO_14443B 2
-#define TOPAZ 3
+#define ISO_14443A 0
+#define ICLASS 1
+#define ISO_14443B 2
+#define TOPAZ 3
+#define PROTO_MIFARE 4
+#define ISO_7816_4 5
+#define ISO_15693 6
+#define ISO_14443_4 7
+
//-- Picopass fuses
#define FUSE_FPERS 0x80
#define FUSE_FPROD0 0x02
#define FUSE_RA 0x01
+// ISO 7816-4 Basic interindustry commands. For command APDU's.
+#define ISO7816_ERASE_BINARY 0x0E
+#define ISO7816_VERIFY 0x20
+#define ISO7816_MANAGE_CHANNEL 0x70
+#define ISO7816_EXTERNAL_AUTHENTICATE 0x82
+#define ISO7816_GET_CHALLENGE 0x84
+#define ISO7816_INTERNAL_AUTHENTICATE 0x88
+#define ISO7816_SELECT_FILE 0xA4
+#define ISO7816_GET_PROCESSING_OPTIONS 0xA8
+#define ISO7816_READ_BINARY 0xB0
+#define ISO7816_READ_RECORDS 0xB2
+#define ISO7816_GET_RESPONSE 0xC0
+#define ISO7816_ENVELOPE 0xC2
+#define ISO7816_GET_DATA 0xCA
+#define ISO7816_WRITE_BINARY 0xD0
+#define ISO7816_WRITE_RECORD 0xD2
+#define ISO7816_UPDATE_BINARY 0xD6
+#define ISO7816_PUT_DATA 0xDA
+#define ISO7816_UPDATE_DATA 0xDC
+#define ISO7816_APPEND_RECORD 0xE2
+// ISO7816-4 For response APDU's
+#define ISO7816_OK 0x9000
+// 6x xx = ERROR
+#define ISO7816_MAX_FRAME_SIZE 261
+
+
+
void printIclassDumpInfo(uint8_t* iclass_dump);
void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb);
#define T55x7_MODULATION_MANCHESTER 0x00008000
#define T55x7_MODULATION_BIPHASE 0x00010000
#define T55x7_MODULATION_DIPHASE 0x00018000
+#define T55x7_X_MODE 0x00020000
#define T55x7_BITRATE_RF_8 0
#define T55x7_BITRATE_RF_16 0x00040000
#define T55x7_BITRATE_RF_32 0x00080000
#define T5555_PSK_RF_8 0x00000200
#define T5555_USE_PWD 0x00000400
#define T5555_USE_AOR 0x00000800
+#define T5555_SET_BITRATE(x) (((x-2)/2)<<12)
+#define T5555_GET_BITRATE(x) ((((x >> 12) & 0x3F)*2)+2)
#define T5555_BITRATE_SHIFT 12 //(RF=2n+2) ie 64=2*0x1F+2 or n = (RF-2)/2
#define T5555_FAST_WRITE 0x00004000
#define T5555_PAGE_SELECT 0x00008000
uint32_t GetT55xxClockBit(uint32_t clock);
+// em4x05 & em4x69 chip configuration register definitions
+#define EM4x05_GET_BITRATE(x) (((x & 0x3F)*2)+2)
+#define EM4x05_SET_BITRATE(x) ((x-2)/2)
+#define EM4x05_MODULATION_NRZ 0x00000000
+#define EM4x05_MODULATION_MANCHESTER 0x00000040
+#define EM4x05_MODULATION_BIPHASE 0x00000080
+#define EM4x05_MODULATION_MILLER 0x000000C0 //not supported by all 4x05/4x69 chips
+#define EM4x05_MODULATION_PSK1 0x00000100 //not supported by all 4x05/4x69 chips
+#define EM4x05_MODULATION_PSK2 0x00000140 //not supported by all 4x05/4x69 chips
+#define EM4x05_MODULATION_PSK3 0x00000180 //not supported by all 4x05/4x69 chips
+#define EM4x05_MODULATION_FSK1 0x00000200 //not supported by all 4x05/4x69 chips
+#define EM4x05_MODULATION_FSK2 0x00000240 //not supported by all 4x05/4x69 chips
+#define EM4x05_PSK_RF_2 0
+#define EM4x05_PSK_RF_4 0x00000400
+#define EM4x05_PSK_RF_8 0x00000800
+#define EM4x05_MAXBLOCK_SHIFT 14
+#define EM4x05_FIRST_USER_BLOCK 5
+#define EM4x05_SET_NUM_BLOCKS(x) ((x+5-1)<<14) //# of blocks sent during default read mode
+#define EM4x05_GET_NUM_BLOCKS(x) (((x>>14) & 0xF)-5+1)
+#define EM4x05_READ_LOGIN_REQ 1<<18
+#define EM4x05_READ_HK_LOGIN_REQ 1<<19
+#define EM4x05_WRITE_LOGIN_REQ 1<<20
+#define EM4x05_WRITE_HK_LOGIN_REQ 1<<21
+#define EM4x05_READ_AFTER_WRITE 1<<22
+#define EM4x05_DISABLE_ALLOWED 1<<23
+#define EM4x05_READER_TALK_FIRST 1<<24
+
#endif
// PROTOCOLS_H
projects / proxmark3-svn / blobdiff