Removed dupicate symbols

[proxmark3-svn] / armsrc / util.c

diff --git a/armsrc/util.c b/armsrc/util.c
index 00dbdbb83e29f176792ba9e7eb3352ca34faa3ed..2d3aab9ca2a56703f4e50737e6f62eeb9cbe7ee9 100644 (file)
--- a/armsrc/util.c
+++ b/armsrc/util.c
@@ -11,6 +11,20 @@
 #include "proxmark3.h"
 #include "util.h"
 #include "string.h"
 #include "proxmark3.h"
 #include "util.h"
 #include "string.h"

+#include "apps.h"
+
+size_t nbytes(size_t nbits) {
+       return (nbits/8)+((nbits%8)>0);
+}
+
+uint32_t SwapBits(uint32_t value, int nrbits) {
+       int i;
+       uint32_t newvalue = 0;
+       for(i = 0; i < nrbits; i++) {
+               newvalue ^= ((value >> i) & 1) << (nrbits - 1 - i);
+       }
+       return newvalue;
+}

 
 void num_to_bytes(uint64_t n, size_t len, uint8_t* dest)
 {
 
 void num_to_bytes(uint64_t n, size_t len, uint8_t* dest)
 {


@@ -213,27 +227,27 @@ void FormatVersionInformation(char *dst, int len, const char *prefix, void *vers
        dst[0] = 0;
        strncat(dst, prefix, len);
        if(v->magic != VERSION_INFORMATION_MAGIC) {
        dst[0] = 0;
        strncat(dst, prefix, len);
        if(v->magic != VERSION_INFORMATION_MAGIC) {

-               strncat(dst, "Missing/Invalid version information", len);
+               strncat(dst, "Missing/Invalid version information", len - strlen(dst) - 1);

                return;
        }
        if(v->versionversion != 1) {
                return;
        }
        if(v->versionversion != 1) {

-               strncat(dst, "Version information not understood", len);
+               strncat(dst, "Version information not understood", len - strlen(dst) - 1);

                return;
        }
        if(!v->present) {
                return;
        }
        if(!v->present) {

-               strncat(dst, "Version information not available", len);
+               strncat(dst, "Version information not available", len - strlen(dst) - 1);

                return;
        }
 
                return;
        }
 

-       strncat(dst, v->svnversion, len);
+       strncat(dst, v->gitversion, len - strlen(dst) - 1);

        if(v->clean == 0) {
        if(v->clean == 0) {

-               strncat(dst, "-unclean", len);
+               strncat(dst, "-unclean", len - strlen(dst) - 1);

        } else if(v->clean == 2) {
        } else if(v->clean == 2) {

-               strncat(dst, "-suspect", len);
+               strncat(dst, "-suspect", len - strlen(dst) - 1);

        }
 
        }
 

-       strncat(dst, " ", len);
-       strncat(dst, v->buildtime, len);
+       strncat(dst, " ", len - strlen(dst) - 1);
+       strncat(dst, v->buildtime, len - strlen(dst) - 1);

 }
 
 //  -------------------------------------------------------------------------
 }
 
 //  -------------------------------------------------------------------------


@@ -281,11 +295,11 @@ void StartCountUS()
        
        AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; // timer disable  
        AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_XC1; // from timer 0
        
        AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; // timer disable  
        AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_XC1; // from timer 0

-
+       

        AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN;
        AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN;
        AT91C_BASE_TCB->TCB_BCR = 1;
        AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN;
        AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN;
        AT91C_BASE_TCB->TCB_BCR = 1;

-}
+       }

 
 uint32_t RAMFUNC GetCountUS(){
        return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV / 15) * 10);
 
 uint32_t RAMFUNC GetCountUS(){
        return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV / 15) * 10);


@@ -301,3 +315,77 @@ uint32_t RAMFUNC GetDeltaCountUS(){
 }
 
 
 }
 
 

+//  -------------------------------------------------------------------------
+//  Timer for iso14443 commands. Uses ssp_clk from FPGA 
+//  -------------------------------------------------------------------------
+void StartCountSspClk()
+{
+       AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC0) | (1 << AT91C_ID_TC1) | (1 << AT91C_ID_TC2);  // Enable Clock to all timers
+       AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC0XC0S_TIOA1               // XC0 Clock = TIOA1
+                                                       | AT91C_TCB_TC1XC1S_NONE                // XC1 Clock = none
+                                                       | AT91C_TCB_TC2XC2S_TIOA0;              // XC2 Clock = TIOA0
+
+       // configure TC1 to create a short pulse on TIOA1 when a rising edge on TIOB1 (= ssp_clk from FPGA) occurs:
+       AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;                               // disable TC1
+       AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_TIMER_DIV1_CLOCK // TC1 Clock = MCK(48MHz)/2 = 24MHz
+                                                       | AT91C_TC_CPCSTOP                              // Stop clock on RC compare
+                                                       | AT91C_TC_EEVTEDG_RISING               // Trigger on rising edge of Event
+                                                       | AT91C_TC_EEVT_TIOB                    // Event-Source: TIOB1 (= ssp_clk from FPGA = 13,56MHz/16)
+                                                       | AT91C_TC_ENETRG                               // Enable external trigger event
+                                                       | AT91C_TC_WAVESEL_UP                   // Upmode without automatic trigger on RC compare
+                                                       | AT91C_TC_WAVE                                 // Waveform Mode
+                                                       | AT91C_TC_AEEVT_SET                    // Set TIOA1 on external event
+                                                       | AT91C_TC_ACPC_CLEAR;                  // Clear TIOA1 on RC Compare
+       AT91C_BASE_TC1->TC_RC = 0x04;                                                   // RC Compare value = 0x04
+
+       // use TC0 to count TIOA1 pulses
+       AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS;                               // disable TC0
+       AT91C_BASE_TC0->TC_CMR = AT91C_TC_CLKS_XC0                              // TC0 clock = XC0 clock = TIOA1
+                                                       | AT91C_TC_WAVE                                 // Waveform Mode
+                                                       | AT91C_TC_WAVESEL_UP                   // just count
+                                                       | AT91C_TC_ACPA_CLEAR                   // Clear TIOA0 on RA Compare
+                                                       | AT91C_TC_ACPC_SET;                    // Set TIOA0 on RC Compare
+       AT91C_BASE_TC0->TC_RA = 1;                                                              // RA Compare value = 1; pulse width to TC2
+       AT91C_BASE_TC0->TC_RC = 0;                                                              // RC Compare value = 0; increment TC2 on overflow
+
+       // use TC2 to count TIOA0 pulses (giving us a 32bit counter (TC0/TC2) clocked by ssp_clk)
+       AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKDIS;                               // disable TC2  
+       AT91C_BASE_TC2->TC_CMR = AT91C_TC_CLKS_XC2                              // TC2 clock = XC2 clock = TIOA0
+                                                       | AT91C_TC_WAVE                                 // Waveform Mode
+                                                       | AT91C_TC_WAVESEL_UP;                  // just count
+       
+       AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN;                                // enable TC0
+       AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN;                                // enable TC1
+       AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKEN;                                // enable TC2
+
+       //
+       // synchronize the counter with the ssp_frame signal. Note: FPGA must be in any iso14446 mode, otherwise the frame signal would not be present 
+       //
+       while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME));   // wait for ssp_frame to go high (start of frame)
+       while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME);              // wait for ssp_frame to be low
+       while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK));     // wait for ssp_clk to go high
+       // note: up to now two ssp_clk rising edges have passed since the rising edge of ssp_frame
+       // it is now safe to assert a sync signal. This sets all timers to 0 on next active clock edge
+       AT91C_BASE_TCB->TCB_BCR = 1;                                                    // assert Sync (set all timers to 0 on next active clock edge)
+       // at the next (3rd) ssp_clk rising edge, TC1 will be reset (and not generate a clock signal to TC0)
+       // at the next (4th) ssp_clk rising edge, TC0 (the low word of our counter) will be reset. From now on,
+       // whenever the last three bits of our counter go 0, we can be sure to be in the middle of a frame transfer.
+       // (just started with the transfer of the 4th Bit).
+       // The high word of the counter (TC2) will not reset until the low word (TC0) overflows. Therefore need to wait quite some time before
+       // we can use the counter.
+       while (AT91C_BASE_TC0->TC_CV < 0xFFF0);
+}
+
+
+uint32_t RAMFUNC GetCountSspClk(){
+       uint32_t tmp_count;
+       tmp_count = (AT91C_BASE_TC2->TC_CV << 16) | AT91C_BASE_TC0->TC_CV;
+       if ((tmp_count & 0x0000ffff) == 0) { //small chance that we may have missed an increment in TC2
+               return (AT91C_BASE_TC2->TC_CV << 16);
+       } 
+       else {
+               return tmp_count;
+       }
+}
+
+