PrintAndLog("By default, values are printed and logged until the button is pressed or another USB command is issued.");
PrintAndLog("If the [1] option is provided, reader mode is exited after reading a single AWID card.");
PrintAndLog("");
- PrintAndLog("Usage: lf awid fskdemod [1]");
+ PrintAndLog("Usage: lf awid fskdemod [h] [1]");
PrintAndLog("Options :");
+ PrintAndLog(" h : This help");
PrintAndLog(" 1 : (optional) stop after reading a single card");
PrintAndLog("");
PrintAndLog("Samples");
PrintAndLog("Enables simulation of AWID card with specified facility-code and card number.");
PrintAndLog("Simulation runs until the button is pressed or another USB command is issued.");
PrintAndLog("");
- PrintAndLog("Usage: lf awid sim <format> <facility-code> <card-number>");
+ PrintAndLog("Usage: lf awid sim [h] <format> <facility-code> <card-number>");
PrintAndLog("Options :");
- PrintAndLog(" <format> : format length 26|50");
+ PrintAndLog(" h : This help");
+ PrintAndLog(" <format> : format length 26|50");
PrintAndLog(" <facility-code> : 8|16bit value facility code");
- PrintAndLog(" <card number> : 16|32-bit value card number");
+ PrintAndLog(" <card number> : 16|32-bit value card number");
PrintAndLog("");
PrintAndLog("Samples");
PrintAndLog(" lf awid sim 26 224 1337");
PrintAndLog("Enables cloning of AWID card with specified facility-code and card number onto T55x7.");
PrintAndLog("The T55x7 must be on the antenna when issuing this command. T55x7 blocks are calculated and printed in the process.");
PrintAndLog("");
- PrintAndLog("Usage: lf awid clone <format> <facility-code> <card-number>");
+ PrintAndLog("Usage: lf awid clone [h] <format> <facility-code> <card-number> [Q5]");
PrintAndLog("Options :");
- PrintAndLog(" <format> : format length 26|50");
+ PrintAndLog(" h : This help");
+ PrintAndLog(" <format> : format length 26|50");
PrintAndLog(" <facility-code> : 8|16bit value facility code");
- PrintAndLog(" <card number> : 16|32-bit value card number");
- PrintAndLog(" Q5 : optional - clone to Q5 (T5555) instead of T55x7 chip");
+ PrintAndLog(" <card number> : 16|32-bit value card number");
+ PrintAndLog(" Q5 : optional - clone to Q5 (T5555) instead of T55x7 chip");
PrintAndLog("");
PrintAndLog("Samples");
PrintAndLog(" lf awid clone 26 224 1337");
PrintAndLog("Enables bruteforce of AWID reader with specified facility-code.");
PrintAndLog("This is a incremental attack against reader.");
PrintAndLog("");
- PrintAndLog("Usage: lf awid brute <format> <facility-code>");
+ PrintAndLog("Usage: lf awid brute [h] <format> <facility-code> <delay>");
PrintAndLog("Options :");
- PrintAndLog(" <format> : format length 26|50");
+ PrintAndLog(" h : This help");
+ PrintAndLog(" <format> : format length 26|50");
PrintAndLog(" <facility-code> : 8|16bit value facility code");
+ PrintAndLog(" <delay> : delay betweens attempts in ms. Default 1000ms");
PrintAndLog("");
PrintAndLog("Samples");
PrintAndLog(" lf awid brute 26 224");
- PrintAndLog(" lf awid brute 50 2001");
+ PrintAndLog(" lf awid brute 50 2001 2000");
return 0;
}
}
if (param_getchar(Cmd, 4) == 'Q' || param_getchar(Cmd, 4) == 'q')
+ //t5555 (Q5) BITRATE = (RF-2)/2 (iceman)
blocks[0] = T5555_MODULATION_FSK2 | T5555_INVERT_OUTPUT | 50<<T5555_BITRATE_SHIFT | 3<<T5555_MAXBLOCK_SHIFT;
if ( !getAWIDBits(fmtlen, fc, cn, bs)) {
c.arg[1] = i;
clearCommandBuffer();
SendCommand(&c);
- if (!WaitForResponseTimeout(CMD_ACK, &resp, 1000)){
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)){
PrintAndLog("Error occurred, device did not respond during write operation.");
return -1;
}
int CmdAWIDBrute(const char *Cmd){
- uint32_t fc = 0x00;
+ uint32_t fc = 0, delay = 1000;
uint8_t fmtlen = 0;
uint8_t bits[96];
uint8_t *bs = bits;
memset(bs, 0x00, size);
char cmdp = param_getchar(Cmd, 0);
- if (strlen(Cmd) > 4 || strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') return usage_lf_awid_brute();
+ if (strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') return usage_lf_awid_brute();
fmtlen = param_get8(Cmd, 0);
fc = param_get32ex(Cmd, 1, 0, 10);
if ( !fc ) return usage_lf_awid_brute();
+ // delay between attemps, defaults to 1000ms.
+ delay = param_get32ex(Cmd, 2, 1000, 10);
+
switch(fmtlen) {
case 50:
if ((fc & 0xFFFF) != fc) {
}
PrintAndLog("Bruteforceing AWID %d Reader", fmtlen);
- PrintAndLog("Press pm3-button to abort simulation or run another command");
+ PrintAndLog("Press pm3-button to abort simulation or press key");
uint64_t arg1 = (10<<8) + 8; // fcHigh = 10, fcLow = 8
uint64_t arg2 = 50; // clk RF/50 invert=0
UsbCommand c = {CMD_FSK_SIM_TAG, {arg1, arg2, size}};
for ( uint16_t cn = 1; cn < 0xFFFF; ++cn){
+
if (ukbhit()) {
- PrintAndLog("aborted via keyboard!");
- c.cmd = CMD_PING;
- c.arg[0] = 0x00;
- c.arg[1] = 0x00;
- c.arg[2] = 0x00;
+ UsbCommand resp;
+ UsbCommand ping = {CMD_PING};
clearCommandBuffer();
- SendCommand(&c);
+ SendCommand(&ping);
+ if (WaitForResponseTimeout(CMD_ACK, &resp, 1000)) {
+ PrintAndLog("aborted via keyboard!");
+ return 0;
+ }
+ PrintAndLog("Device didnt respond to ABORT");
return 1;
}
-
- (void)getAWIDBits(fmtlen, fc, cn, bs);
+
+ PrintAndLog("Trying FC: %u; CN: %u", fc, cn);
+ if ( !getAWIDBits(fmtlen, fc, cn, bs)) {
+ PrintAndLog("Error with tag bitstream generation.");
+ return 1;
+ }
memcpy(c.d.asBytes, bs, size);
clearCommandBuffer();
SendCommand(&c);
- PrintAndLog("Trying FC: %u; CN: %u", fc, cn);
- // pause
- sleep(1);
+ msleep(delay);
}
return 0;
}
static command_t CommandTable[] = {
{"help", CmdHelp, 1, "This help"},
{"fskdemod", CmdAWIDDemodFSK, 0, "['1'] Realtime AWID FSK demodulator (option '1' for one tag only)"},
- {"sim", CmdAWIDSim, 0, "<Facility-Code> <Card Number> -- AWID tag simulator"},
- {"clone", CmdAWIDClone, 0, "<Facility-Code> <Card Number> <Q5> -- Clone AWID to T55x7"},
- {"brute", CmdAWIDBrute, 0, "<Facility-Code> -- bruteforce card number"},
+ {"sim", CmdAWIDSim, 0, "<facility-code> <card number> -- AWID tag simulator"},
+ {"clone", CmdAWIDClone, 0, "<facility-code> <card number> <Q5> -- Clone AWID to T55x7"},
+ {"brute", CmdAWIDBrute, 0, "<format> <facility-code> <delay> -- bruteforce card number given a FC"},
{NULL, NULL, 0, NULL}
};
projects / proxmark3-svn / blobdiff