-NOTICE:
-(2014-03-26)
-This is now the official Proxmark repository!
-
-INTRODUCTION:
-
-The proxmark3 is a powerful general purpose RFID tool, the size of a deck
-of cards, designed to snoop, listen and emulate everything from
-Low Frequency (125kHz) to High Frequency (13.56MHz) tags.
-
-This repository contains enough software, logic (for the FPGA), and design
-documentation for the hardware that you could, at least in theory,
-do something useful with a proxmark3.
-
-RESOURCES:
-
- * This repository!
- https://github.com/Proxmark/proxmark3
-
- * The Wiki
- https://github.com/Proxmark/proxmark3/wiki
-
- * The GitHub page
- http://proxmark.github.io/proxmark3/
-
- * The Forum
- http://www.proxmark.org/forum
-
- * The IRC chanel
- irc.freenode.org #proxmark3
- -or-
- http://webchat.freenode.net/?channels=#proxmark3
-
-DEVELOPMENT:
+The iceman fork
+---------------
+NOTICE:
+
+The official Proxmark repository is found here: https://github.com/Proxmark/proxmark3
+
+NEWS:
+
+::THIS FORK IS HIGHLY EXPERIMENTAL::
+
+
+Whats in this fork? I have scraped the web for different enhancements to the PM3 source code and not all of them ever found their way to the master branch.
+Among the stuff is
-The tools required to build or run the project will vary depending on
-your operating system. Please refer to the Wiki for details.
+ * Jonor's hf 14a raw timing patch
+ * Piwi's updates. (usually gets into the master)
+ * Piwi's "topaz" branch
+ * Piwi's "hardnested" branch
+ * Holiman's iclass, (usually gets into the master)
+ * Marshmellow's fixes (usually gets into the master)
+ * Midnitesnake's Ultralight, Ultralight-c enhancements
+ * Izsh's lf peak modification / iir-filtering
+ * Aspers's tips and tricks from inside the PM3-gui-tool, settings.xml and other stuff.
+ * My own desfire, Ultralight extras, LF T55xx enhancements, bugs fixes (filelength, hf mf commands ), TNP3xxx lua scripts, Awid26, skidata scripts (will come)
+ * other obscure patches like for the sammy-mode, (offline you know), tagidentifications, defaultkeys.
+ * Minor textual changes here and there.
+ * Simulation of Ultralight/Ntag.
+ * Marshmellow's and my "RevEng" addon for the client. Ref: http://reveng.sourceforge.net/
+ * Someone's alternative bruteforce Mifare changes.. (you need the two other exe to make it work)
- * https://github.com/Proxmark/proxmark3/wiki
+ * A Bruteforce for T55XX passwords against tag.
+ * A Bruteforce for AWID 26, starting w a facilitycode then trying all 0xFFFF cardnumbers via simulation. To be used against a AWID Reader.
-OBTAINING HARDWARE:
+
+Give me a hint, and I'll see if I can't merge in the stuff you have.
-The Proxmark 3 is available for purcahse (assembled and tested) from the
+I don't actually know how to make small pull-request to github :( and that is the number one reason for me not pushing a lot of things back to the PM3 master.
+
+PM3 GUI:
+
+I do tend to rename and move stuff around, the official PM3-GUI from Gaucho will not work so well. *sorry*
+
+
+
+DEVELOPMENT:
+
+This fork is adjusted to compile on windows/mingw environment with Qt5.3.1 & GCC 4.8
+For people with linux you will need to patch some source code and some small change to one makefile. If you are lazy, you google the forum and find asper's or holimans makefile or you find your solution below.
+
+GC made updates to allow this to build easily on Ubuntu 14.04.2 LTS.
+ - See https://github.com/Proxmark/proxmark3/wiki/Ubuntu%20Linux
+ - Generally speaking, if you're running a "later" Proxmark, installation is very easy.
+ - Run "sudo apt-get install p7zip git build-essential libreadline5 libreadline-dev libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config wget"a
+ - Follow these instructions
+Get devkitARM release 41 from SourceForge (choose either the 64/32 ¿bit depending on your architecture, it is assumed you know how to check and recognize your architecture):
+
+(64-bit) http://sourceforge.net/projects/devkitpro/files/devkitARM/previous/devkitARM_r41-x86_64-linux.tar.bz2/download
+(32-bit) http://sourceforge.net/projects/devkitpro/files/devkitARM/previous/devkitARM_r41-i686-linux.tar.bz2/download
+Extract the contents of the .tar.bz2:
+ tar jxvf devkitARM_r41-<arch>-linux.tar.bz2
+Create a directory for the arm dev kit:
+ sudo mkdir -p /opt/devkitpro/
+Move the ARM developer kit to the newly created directory:
+ sudo mv devkitARM /opt/devkitpro/
+Add the appropriate environment variable:
+ export PATH=${PATH}:/opt/devkitpro/devkitARM/bin/
+Add the environment variable to your profile:
+ echo 'PATH=${PATH}:/opt/devkitpro/devkitARM/bin/ ' >> ~/.bashrc
+ - Use the magic build command "make UBUNTU_1404_QT4=1"
+
+Common errors linux/macOS finds
+
+Error:
+ * \client\makefile the parameter -lgdi32
+Solution:
+ * Remove parameter.
+
+Error:
+ * Using older Qt4.6 gives compilation errors.
+Solution
+ * Upgrade to Qt5.3.1
+ OR
+ * Change these two line in \client\makefile
+ CXXFLAGS = -I$(QTDIR)/include -I$(QTDIR)/include/QtCore -I$(QTDIR)/include/QtGui -I$(QTDIR)/include/QtWidgets -I/mingw/include
+ QTLDLIBS = -L$(QTDIR)/lib -lQt5Core -lQt5Gui -lQt5Widgets
+
+ TO
+
+ CXXFLAGS = -I$(QTDIR)/include -I$(QTDIR)/include/QtCore -I$(QTDIR)/include/QtGui
+ QTLDLIBS = -L$(QTDIR)/lib -lQtCore4 -lQtGui4
+
+
+An old Qt4 version makefile is found here: http://www.icesql.se/proxmark3/code/linuxmakefile.txt but this one doesn't have all new files in it. So I don't recommend it.
+
+
+January 2015, Sweden
+iceman at host iuse.se
+
+
+The Proxmark 3 is available for purchase (assembled and tested) from the
following locations:
- * http://proxmark3.com/
- * http://www.xfpga.com/
+ * http://www.elechouse.com (new and revised hardware package 2015)
+
Most of the ultra-low-volume contract assemblers could put
something like this together with a reasonable yield. A run of around
projects / proxmark3-svn / blobdiff