// The main application code. This is the first thing called after start.c
// executes.
//-----------------------------------------------------------------------------
-
#include "usb_cdc.h"
-#include "cmd.h"
-
#include "proxmark3.h"
#include "apps.h"
#include "util.h"
#include "printf.h"
#include "string.h"
-
-#include <stdarg.h>
-
#include "legicrf.h"
-#include <hitag2.h>
#include "lfsampling.h"
#include "BigBuf.h"
#include "mifareutil.h"
-#include "pcf7931.h"
+
#ifdef WITH_LCD
#include "LCD.h"
#endif
// Craig Young - 14a stand-alone code
#ifdef WITH_ISO14443a_StandAlone
#include "iso14443a.h"
+ #include "protocols.h"
#endif
-#define abs(x) ( ((x)<0) ? -(x) : (x) )
-
//=============================================================================
// A buffer where we can queue things up to be sent through the FPGA, for
// any purpose (fake tag, as reader, whatever). We go MSB first, since that
ToSendBit = 8;
}
-void ToSendStuffBit(int b)
-{
+void ToSendStuffBit(int b) {
if(ToSendBit >= 8) {
- ToSendMax++;
+ ++ToSendMax;
ToSend[ToSendMax] = 0;
ToSendBit = 0;
}
- if(b) {
+ if(b)
ToSend[ToSendMax] |= (1 << (7 - ToSendBit));
- }
- ToSendBit++;
+ ++ToSendBit;
if(ToSendMax >= sizeof(ToSend)) {
ToSendBit = 0;
}
}
+void PrintToSendBuffer(void){
+ DbpString("Printing ToSendBuffer:");
+ Dbhexdump(ToSendMax, ToSend, 0);
+}
+
+void print_result(char *name, uint8_t *buf, size_t len) {
+ uint8_t *p = buf;
+
+ if ( len % 16 == 0 ) {
+ for(; p-buf < len; p += 16)
+ Dbprintf("[%s:%d/%d] %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
+ name,
+ p-buf,
+ len,
+ p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],p[8], p[9], p[10], p[11], p[12], p[13], p[14], p[15]
+ );
+ }
+ else {
+ for(; p-buf < len; p += 8)
+ Dbprintf("[%s:%d/%d] %02x %02x %02x %02x %02x %02x %02x %02x",
+ name,
+ p-buf,
+ len,
+ p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
+ }
+}
+
//=============================================================================
// Debug print functions, to go out over USB, to the usual PC-side client.
//=============================================================================
-void DbpString(char *str)
-{
- byte_t len = strlen(str);
- cmd_send(CMD_DEBUG_PRINT_STRING,len,0,0,(byte_t*)str,len);
+void DbpStringEx(char *str, uint32_t cmd){
+ byte_t len = strlen(str);
+ cmd_send(CMD_DEBUG_PRINT_STRING,len, cmd,0,(byte_t*)str,len);
+}
+
+void DbpString(char *str) {
+ DbpStringEx(str, 0);
}
#if 0
-void DbpIntegers(int x1, int x2, int x3)
-{
- cmd_send(CMD_DEBUG_PRINT_INTEGERS,x1,x2,x3,0,0);
+void DbpIntegers(int x1, int x2, int x3) {
+ cmd_send(CMD_DEBUG_PRINT_INTEGERS,x1,x2,x3,0,0);
}
#endif
+void DbprintfEx(uint32_t cmd, const char *fmt, ...) {
+ // should probably limit size here; oh well, let's just use a big buffer
+ char output_string[128] = {0x00};
+ va_list ap;
+
+ va_start(ap, fmt);
+ kvsprintf(fmt, output_string, 10, ap);
+ va_end(ap);
+
+ DbpStringEx(output_string, cmd);
+}
void Dbprintf(const char *fmt, ...) {
-// should probably limit size here; oh well, let's just use a big buffer
- char output_string[128];
+ // should probably limit size here; oh well, let's just use a big buffer
+ char output_string[128] = {0x00};
va_list ap;
va_start(ap, fmt);
// prints HEX & ASCII
void Dbhexdump(int len, uint8_t *d, bool bAsci) {
- int l=0,i;
+ int l=0, i;
char ascii[9];
while (len>0) {
- if (len>8) l=8;
- else l=len;
+
+ l = (len>8) ? 8 : len;
memcpy(ascii,d,l);
ascii[l]=0;
// filter safe ascii
- for (i=0;i<l;i++)
+ for (i=0; i<l; ++i)
if (ascii[i]<32 || ascii[i]>126) ascii[i]='.';
- if (bAsci) {
+ if (bAsci)
Dbprintf("%-8s %*D",ascii,l,d," ");
- } else {
+ else
Dbprintf("%*D",l,d," ");
- }
- len-=8;
- d+=8;
+ len -= 8;
+ d += 8;
}
}
AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
- while(!(AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ch)))
- ;
+ while (!(AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ch))) ;
+
d = AT91C_BASE_ADC->ADC_CDR[ch];
-
return d;
}
int AvgAdc(int ch) // was static - merlok
{
- int i;
- int a = 0;
-
- for(i = 0; i < 32; i++) {
+ int i, a = 0;
+ for(i = 0; i < 32; ++i)
a += ReadAdc(ch);
- }
return (a + 15) >> 5;
}
-void MeasureAntennaTuning(void)
-{
+
+void MeasureAntennaTuning(void) {
+
uint8_t LF_Results[256];
- int i, adcval = 0, peak = 0, peakv = 0, peakf = 0; //ptr = 0
+ int i, adcval = 0, peak = 0, peakv = 0, peakf = 0;
int vLf125 = 0, vLf134 = 0, vHf = 0; // in mV
+ memset(LF_Results, 0, sizeof(LF_Results));
LED_B_ON();
/*
FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
- for (i=255; i>=19; i--) {
- WDT_HIT();
+
+ for (i = 255; i >= 19; i--) {
+ WDT_HIT();
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);
SpinDelay(20);
adcval = ((MAX_ADC_LF_VOLTAGE * AvgAdc(ADC_CHAN_LF)) >> 10);
if (i==95) vLf125 = adcval; // voltage at 125Khz
if (i==89) vLf134 = adcval; // voltage at 134Khz
- LF_Results[i] = adcval>>8; // scale int to fit in byte for graphing purposes
+ LF_Results[i] = adcval >> 8; // scale int to fit in byte for graphing purposes
if(LF_Results[i] > peak) {
peakv = adcval;
peak = LF_Results[i];
peakf = i;
- //ptr = i;
}
}
- for (i=18; i >= 0; i--) LF_Results[i] = 0;
-
LED_A_ON();
// Let the FPGA drive the high-frequency antenna around 13.56 MHz.
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
SpinDelay(20);
vHf = (MAX_ADC_HF_VOLTAGE * AvgAdc(ADC_CHAN_HF)) >> 10;
- cmd_send(CMD_MEASURED_ANTENNA_TUNING, vLf125 | (vLf134<<16), vHf, peakf | (peakv<<16), LF_Results, 256);
+ cmd_send(CMD_MEASURED_ANTENNA_TUNING, vLf125 | (vLf134 << 16), vHf, peakf | (peakv << 16), LF_Results, 256);
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- LED_A_OFF();
- LED_B_OFF();
- return;
+ LEDsoff();
}
-void MeasureAntennaTuningHf(void)
-{
+void MeasureAntennaTuningHf(void) {
int vHf = 0; // in mV
-
- DbpString("Measuring HF antenna, press button to exit");
-
// Let the FPGA drive the high-frequency antenna around 13.56 MHz.
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
- for (;;) {
+ while ( !BUTTON_PRESS() ){
SpinDelay(20);
vHf = (MAX_ADC_HF_VOLTAGE * AvgAdc(ADC_CHAN_HF)) >> 10;
-
- Dbprintf("%d mV",vHf);
- if (BUTTON_PRESS()) break;
+ //Dbprintf("%d mV",vHf);
+ DbprintfEx(CMD_MEASURE_ANTENNA_TUNING_HF, "%d mV",vHf);
}
- DbpString("cancelled");
-
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-
+ DbpString("cancelled");
}
-void ReadMem(int addr)
-{
+void ReadMem(int addr) {
const uint8_t *data = ((uint8_t *)addr);
Dbprintf("%x: %02x %02x %02x %02x %02x %02x %02x %02x",
* pointer, then use it.
*/
char *bootrom_version = *(char**)&_bootphase1_version_pointer;
+
if( bootrom_version < &_flash_start || bootrom_version >= &_flash_end ) {
strcat(VersionString, "bootrom version information appears invalid\n");
} else {
FpgaGatherVersion(FPGA_BITSTREAM_LF, temp, sizeof(temp));
strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
+
FpgaGatherVersion(FPGA_BITSTREAM_HF, temp, sizeof(temp));
strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
/**
* Prints runtime information about the PM3.
**/
-void SendStatus(void)
-{
+void SendStatus(void) {
BigBuf_print_status();
Fpga_print_status();
printConfig(); //LF Sampling config
#if defined(WITH_ISO14443a_StandAlone) || defined(WITH_LF)
#define OPTS 2
-
void StandAloneMode()
{
DbpString("Stand-alone mode! No PC necessary.");
LED(LED_GREEN, 200);
LED(LED_ORANGE, 200);
LED(LED_RED, 200);
-
}
-
#endif
-
-
#ifdef WITH_ISO14443a_StandAlone
void StandAloneMode14a()
{
uint32_t uid_tmp2 = 0;
iso14a_card_select_t hi14a_card[OPTS];
+ uint8_t params = (MAGIC_SINGLE | MAGIC_DATAIN);
+
LED(selected + 1, 0);
for (;;)
/* need this delay to prevent catching some weird data */
SpinDelay(500);
/* Code for reading from 14a tag */
- uint8_t uid[10] ={0};
- uint32_t cuid;
+ uint8_t uid[10] = {0};
+ uint32_t cuid = 0;
iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
for ( ; ; )
SpinDelay(300);
}
}
- if (!iso14443a_select_card(uid, &hi14a_card[selected], &cuid))
+ if (!iso14443a_select_card(uid, &hi14a_card[selected], &cuid, true, 0))
continue;
else
{
else if (iGotoClone==1)
{
iGotoClone=0;
- LEDsoff();
- LED(selected + 1, 0);
- LED(LED_ORANGE, 250);
+ LEDsoff();
+ LED(selected + 1, 0);
+ LED(LED_ORANGE, 250);
+ // record
+ Dbprintf("Preparing to Clone card [Bank: %x]; uid: %08x", selected, uid_1st[selected]);
- // record
- Dbprintf("Preparing to Clone card [Bank: %x]; uid: %08x", selected, uid_1st[selected]);
+ // wait for button to be released
+ // Delay cloning until card is in place
+ while(BUTTON_PRESS())
+ WDT_HIT();
- // wait for button to be released
- while(BUTTON_PRESS())
- {
- // Delay cloning until card is in place
- WDT_HIT();
- }
- Dbprintf("Starting clone. [Bank: %u]", selected);
- // need this delay to prevent catching some weird data
- SpinDelay(500);
- // Begin clone function here:
- /* Example from client/mifarehost.c for commanding a block write for "magic Chinese" cards:
- UsbCommand c = {CMD_MIFARE_CSETBLOCK, {wantWipe, params & (0xFE | (uid == NULL ? 0:1)), blockNo}};
- memcpy(c.d.asBytes, data, 16);
- SendCommand(&c);
-
- Block read is similar:
- UsbCommand c = {CMD_MIFARE_CGETBLOCK, {params, 0, blockNo}};
- We need to imitate that call with blockNo 0 to set a uid.
-
- The get and set commands are handled in this file:
- // Work with "magic Chinese" card
- case CMD_MIFARE_CSETBLOCK:
- MifareCSetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
- break;
- case CMD_MIFARE_CGETBLOCK:
- MifareCGetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
- break;
-
- mfCSetUID provides example logic for UID set workflow:
- -Read block0 from card in field with MifareCGetBlock()
- -Configure new values without replacing reserved bytes
- memcpy(block0, uid, 4); // Copy UID bytes from byte array
- // Mifare UID BCC
- block0[4] = block0[0]^block0[1]^block0[2]^block0[3]; // BCC on byte 5
- Bytes 5-7 are reserved SAK and ATQA for mifare classic
- -Use mfCSetBlock(0, block0, oldUID, wantWipe, CSETBLOCK_SINGLE_OPER) to write it
- */
- uint8_t oldBlock0[16] = {0}, newBlock0[16] = {0}, testBlock0[16] = {0};
- // arg0 = Flags == CSETBLOCK_SINGLE_OPER=0x1F, arg1=returnSlot, arg2=blockNo
- MifareCGetBlock(0x3F, 1, 0, oldBlock0);
+ Dbprintf("Starting clone. [Bank: %u]", selected);
+ // need this delay to prevent catching some weird data
+ SpinDelay(500);
+ // Begin clone function here:
+ /* Example from client/mifarehost.c for commanding a block write for "magic Chinese" cards:
+ UsbCommand c = {CMD_MIFARE_CSETBLOCK, {params & (0xFE | (uid == NULL ? 0:1)), blockNo, 0}};
+ memcpy(c.d.asBytes, data, 16);
+ SendCommand(&c);
+
+ Block read is similar:
+ UsbCommand c = {CMD_MIFARE_CGETBLOCK, {params, blockNo, 0}};
+ We need to imitate that call with blockNo 0 to set a uid.
+
+ The get and set commands are handled in this file:
+ // Work with "magic Chinese" card
+ case CMD_MIFARE_CSETBLOCK:
+ MifareCSetBlock(c->arg[0], c->arg[1], c->d.asBytes);
+ break;
+ case CMD_MIFARE_CGETBLOCK:
+ MifareCGetBlock(c->arg[0], c->arg[1], c->d.asBytes);
+ break;
+
+ mfCSetUID provides example logic for UID set workflow:
+ -Read block0 from card in field with MifareCGetBlock()
+ -Configure new values without replacing reserved bytes
+ memcpy(block0, uid, 4); // Copy UID bytes from byte array
+ // Mifare UID BCC
+ block0[4] = block0[0]^block0[1]^block0[2]^block0[3]; // BCC on byte 5
+ Bytes 5-7 are reserved SAK and ATQA for mifare classic
+ -Use mfCSetBlock(0, block0, oldUID, wantWipe, MAGIC_SINGLE) to write it
+ */
+ uint8_t oldBlock0[16] = {0}, newBlock0[16] = {0}, testBlock0[16] = {0};
+ // arg0 = Flags, arg1=blockNo
+ MifareCGetBlock(params, 0, oldBlock0);
if (oldBlock0[0] == 0 && oldBlock0[0] == oldBlock0[1] && oldBlock0[1] == oldBlock0[2] && oldBlock0[2] == oldBlock0[3]) {
Dbprintf("No changeable tag detected. Returning to replay mode for bank[%d]", selected);
playing = 1;
}
else {
- Dbprintf("UID from target tag: %02X%02X%02X%02X", oldBlock0[0],oldBlock0[1],oldBlock0[2],oldBlock0[3]);
- memcpy(newBlock0,oldBlock0,16);
- // Copy uid_1st for bank (2nd is for longer UIDs not supported if classic)
-
- newBlock0[0] = uid_1st[selected]>>24;
- newBlock0[1] = 0xFF & (uid_1st[selected]>>16);
- newBlock0[2] = 0xFF & (uid_1st[selected]>>8);
- newBlock0[3] = 0xFF & (uid_1st[selected]);
- newBlock0[4] = newBlock0[0]^newBlock0[1]^newBlock0[2]^newBlock0[3];
- // arg0 = needWipe, arg1 = workFlags, arg2 = blockNo, datain
- MifareCSetBlock(0, 0xFF,0, newBlock0);
- MifareCGetBlock(0x3F, 1, 0, testBlock0);
- if (memcmp(testBlock0,newBlock0,16)==0)
- {
- DbpString("Cloned successfull!");
- cardRead[selected] = 0; // Only if the card was cloned successfully should we clear it
+ Dbprintf("UID from target tag: %02X%02X%02X%02X", oldBlock0[0],oldBlock0[1],oldBlock0[2],oldBlock0[3]);
+ memcpy(newBlock0,oldBlock0,16);
+ // Copy uid_1st for bank (2nd is for longer UIDs not supported if classic)
+
+ newBlock0[0] = uid_1st[selected]>>24;
+ newBlock0[1] = 0xFF & (uid_1st[selected]>>16);
+ newBlock0[2] = 0xFF & (uid_1st[selected]>>8);
+ newBlock0[3] = 0xFF & (uid_1st[selected]);
+ newBlock0[4] = newBlock0[0]^newBlock0[1]^newBlock0[2]^newBlock0[3];
+
+ // arg0 = workFlags, arg1 = blockNo, datain
+ MifareCSetBlock(params, 0, newBlock0);
+ MifareCGetBlock(params, 0, testBlock0);
+
+ if (memcmp(testBlock0, newBlock0, 16)==0) {
+ DbpString("Cloned successfull!");
+ cardRead[selected] = 0; // Only if the card was cloned successfully should we clear it
playing = 0;
iGotoRecord = 1;
- selected = (selected + 1) % OPTS;
- }
- else {
+ selected = (selected + 1) % OPTS;
+ } else {
Dbprintf("Clone failed. Back to replay mode on bank[%d]", selected);
playing = 1;
}
}
LEDsoff();
LED(selected + 1, 0);
-
}
// Change where to record (or begin playing)
else if (playing==1) // button_pressed == BUTTON_SINGLE_CLICK && cardRead[selected])
// Turn on selected LED
LED(selected + 1, 0);
- for (;;)
- {
+ for (;;) {
usb_poll();
WDT_HIT();
SpinDelay(500);
CmdHIDdemodFSK(1, &high[selected], &low[selected], 0);
- Dbprintf("Recorded %x %x %x", selected, high[selected], low[selected]);
+ Dbprintf("Recorded %x %x %08x", selected, high[selected], low[selected]);
LEDsoff();
LED(selected + 1, 0);
// Finished recording
-
// If we were previously playing, set playing off
// so next button push begins playing what we recorded
- playing = 0;
-
- cardRead = 1;
-
+ playing = 0;
+ cardRead = 1;
}
+ else if (button_pressed > 0 && cardRead == 1) {
+ LEDsoff();
+ LED(selected + 1, 0);
+ LED(LED_ORANGE, 0);
- else if (button_pressed > 0 && cardRead == 1)
- {
- LEDsoff();
- LED(selected + 1, 0);
- LED(LED_ORANGE, 0);
-
- // record
- Dbprintf("Cloning %x %x %x", selected, high[selected], low[selected]);
+ // record
+ Dbprintf("Cloning %x %x %08x", selected, high[selected], low[selected]);
- // wait for button to be released
- while(BUTTON_PRESS())
- WDT_HIT();
+ // wait for button to be released
+ while(BUTTON_PRESS())
+ WDT_HIT();
- /* need this delay to prevent catching some weird data */
- SpinDelay(500);
+ /* need this delay to prevent catching some weird data */
+ SpinDelay(500);
- CopyHIDtoT55x7(high[selected], low[selected], 0, 0);
- Dbprintf("Cloned %x %x %x", selected, high[selected], low[selected]);
+ CopyHIDtoT55x7(0, high[selected], low[selected], 0);
+ Dbprintf("Cloned %x %x %08x", selected, high[selected], low[selected]);
- LEDsoff();
- LED(selected + 1, 0);
- // Finished recording
+ LEDsoff();
+ LED(selected + 1, 0);
+ // Finished recording
- // If we were previously playing, set playing off
- // so next button push begins playing what we recorded
- playing = 0;
-
- cardRead = 0;
-
+ // If we were previously playing, set playing off
+ // so next button push begins playing what we recorded
+ playing = 0;
+ cardRead = 0;
}
// Change where to record (or begin playing)
- else if (button_pressed)
- {
+ else if (button_pressed) {
// Next option if we were previously playing
if (playing)
selected = (selected + 1) % OPTS;
// wait for button to be released
while(BUTTON_PRESS())
WDT_HIT();
- Dbprintf("%x %x %x", selected, high[selected], low[selected]);
- CmdHIDsimTAG(high[selected], low[selected], 0);
+
+ Dbprintf("%x %x %08x", selected, high[selected], low[selected]);
+ CmdHIDsimTAG(high[selected], low[selected], 0);
DbpString("Done playing");
- if (BUTTON_HELD(1000) > 0)
- {
+
+ if (BUTTON_HELD(1000) > 0) {
DbpString("Exiting");
LEDsoff();
return;
- }
+ }
/* We pressed a button so ignore it here with a delay */
SpinDelay(300);
};
static const int LIGHT_LEN = sizeof(LIGHT_SCHEME)/sizeof(LIGHT_SCHEME[0]);
-void ListenReaderField(int limit)
-{
- int lf_av, lf_av_new, lf_baseline= 0, lf_max;
- int hf_av, hf_av_new, hf_baseline= 0, hf_max;
- int mode=1, display_val, display_max, i;
-
+void ListenReaderField(int limit) {
#define LF_ONLY 1
#define HF_ONLY 2
#define REPORT_CHANGE 10 // report new values only if they have changed at least by REPORT_CHANGE
+ int lf_av, lf_av_new, lf_baseline= 0, lf_max;
+ int hf_av, hf_av_new, hf_baseline= 0, hf_max;
+ int mode=1, display_val, display_max, i;
// switch off FPGA - we don't want to measure our own signal
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
if (limit != HF_ONLY) {
if(mode == 1) {
- if (abs(lf_av - lf_baseline) > REPORT_CHANGE)
+ if (ABS(lf_av - lf_baseline) > REPORT_CHANGE)
LED_D_ON();
else
LED_D_OFF();
lf_av_new = AvgAdc(ADC_CHAN_LF);
// see if there's a significant change
- if(abs(lf_av - lf_av_new) > REPORT_CHANGE) {
+ if(ABS(lf_av - lf_av_new) > REPORT_CHANGE) {
Dbprintf("LF 125/134kHz Field Change: %5dmV", (MAX_ADC_LF_VOLTAGE * lf_av_new) >> 10);
lf_av = lf_av_new;
if (lf_av > lf_max)
if (limit != LF_ONLY) {
if (mode == 1){
- if (abs(hf_av - hf_baseline) > REPORT_CHANGE)
+ if (ABS(hf_av - hf_baseline) > REPORT_CHANGE)
LED_B_ON();
else
LED_B_OFF();
hf_av_new = AvgAdc(ADC_CHAN_HF);
// see if there's a significant change
- if(abs(hf_av - hf_av_new) > REPORT_CHANGE) {
+ if(ABS(hf_av - hf_av_new) > REPORT_CHANGE) {
Dbprintf("HF 13.56MHz Field Change: %5dmV", (MAX_ADC_HF_VOLTAGE * hf_av_new) >> 10);
hf_av = hf_av_new;
if (hf_av > hf_max)
{
UsbCommand *c = (UsbCommand *)packet;
- //Dbprintf("received %d bytes, with command: 0x%04x and args: %d %d %d",len,c->cmd,c->arg[0],c->arg[1],c->arg[2]);
+ //Dbprintf("received %d bytes, with command: 0x%04x and args: %d %d %d",len,c->cmd,c->arg[0],c->arg[1],c->arg[2]);
switch(c->cmd) {
#ifdef WITH_LF
cmd_send(CMD_ACK, SampleLF(c->arg[0]),0,0,0,0);
break;
case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K:
- ModThenAcquireRawAdcSamples125k(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
+ ModThenAcquireRawAdcSamples125k(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
break;
case CMD_LF_SNOOP_RAW_ADC_SAMPLES:
cmd_send(CMD_ACK,SnoopLF(),0,0,0,0);
WriteTItag(c->arg[0],c->arg[1],c->arg[2]);
break;
case CMD_SIMULATE_TAG_125K:
- LED_A_ON();
+ LED_A_ON();
SimulateTagLowFrequency(c->arg[0], c->arg[1], 1);
LED_A_OFF();
break;
break;
case CMD_AWID_DEMOD_FSK: // Set realtime AWID demodulation
CmdAWIDdemodFSK(c->arg[0], 0, 0, 1);
- break;
+ break;
case CMD_VIKING_CLONE_TAG:
- CopyViKingtoT55x7(c->arg[0],c->arg[1]);
+ CopyVikingtoT55xx(c->arg[0], c->arg[1], c->arg[2]);
break;
-
-
#endif
#ifdef WITH_HITAG
case CMD_READER_HITAG: // Reader for Hitag tags, args = type and function
ReaderHitag((hitag_function)c->arg[0],(hitag_data*)c->d.asBytes);
break;
+ case CMD_SIMULATE_HITAG_S:// Simulate Hitag s tag, args = memory content
+ SimulateHitagSTag((bool)c->arg[0],(byte_t*)c->d.asBytes);
+ break;
+ case CMD_TEST_HITAGS_TRACES:// Tests every challenge within the given file
+ check_challenges((bool)c->arg[0],(byte_t*)c->d.asBytes);
+ break;
+ case CMD_READ_HITAG_S: //Reader for only Hitag S tags, args = key or challenge
+ ReadHitagS((hitag_function)c->arg[0],(hitag_data*)c->d.asBytes);
+ break;
+ case CMD_WR_HITAG_S: //writer for Hitag tags args=data to write,page and key or challenge
+ WritePageHitagS((hitag_function)c->arg[0],(hitag_data*)c->d.asBytes,c->arg[2]);
+ break;
#endif
#ifdef WITH_ISO15693
case CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693:
RecordRawAdcSamplesIso15693();
break;
-
case CMD_ISO_15693_COMMAND:
DirectTag15693Command(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
break;
-
case CMD_ISO_15693_FIND_AFI:
BruteforceIso15693Afi(c->arg[0]);
break;
-
case CMD_ISO_15693_DEBUG:
SetDebugIso15693(c->arg[0]);
break;
-
case CMD_READER_ISO_15693:
ReaderIso15693(c->arg[0]);
break;
case CMD_SIMULATE_TAG_LEGIC_RF:
LegicRfSimulate(c->arg[0], c->arg[1], c->arg[2]);
break;
-
case CMD_WRITER_LEGIC_RF:
- LegicRfWriter(c->arg[1], c->arg[0]);
+ LegicRfWriter( c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
break;
-
case CMD_READER_LEGIC_RF:
- LegicRfReader(c->arg[0], c->arg[1]);
+ LegicRfReader(c->arg[0], c->arg[1], c->arg[2]);
+ break;
+ case CMD_LEGIC_INFO:
+ LegicRfInfo();
+ break;
+ case CMD_LEGIC_ESET:
+ LegicEMemSet(c->arg[0], c->arg[1], c->d.asBytes);
break;
#endif
#ifdef WITH_ISO14443b
- case CMD_READ_SRI512_TAG:
- ReadSTMemoryIso14443b(0x0F);
- break;
- case CMD_READ_SRIX4K_TAG:
- ReadSTMemoryIso14443b(0x7F);
+ case CMD_READ_SRI_TAG:
+ ReadSTMemoryIso14443b(c->arg[0]);
break;
case CMD_SNOOP_ISO_14443B:
SnoopIso14443b();
break;
case CMD_SIMULATE_TAG_ISO_14443B:
- SimulateIso14443bTag();
+ SimulateIso14443bTag(c->arg[0]);
break;
case CMD_ISO_14443B_COMMAND:
- SendRawCommand14443B(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
+ //SendRawCommand14443B(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
+ SendRawCommand14443B_Ex(c);
break;
#endif
case CMD_SIMULATE_TAG_ISO_14443a:
SimulateIso14443aTag(c->arg[0], c->arg[1], c->d.asBytes); // ## Simulate iso14443a tag - pass tag type & UID
break;
-
case CMD_EPA_PACE_COLLECT_NONCE:
EPA_PACE_Collect_Nonce(c);
break;
case CMD_EPA_PACE_REPLAY:
EPA_PACE_Replay(c);
break;
-
case CMD_READER_MIFARE:
- ReaderMifare(c->arg[0]);
+ ReaderMifare(c->arg[0], c->arg[1], c->arg[2]);
break;
case CMD_MIFARE_READBL:
MifareReadBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
case CMD_MIFAREU_WRITEBL:
MifareUWriteBlock(c->arg[0], c->arg[1], c->d.asBytes);
break;
+ case CMD_MIFARE_ACQUIRE_ENCRYPTED_NONCES:
+ MifareAcquireEncryptedNonces(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+ break;
case CMD_MIFARE_NESTED:
MifareNested(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
break;
// Work with "magic Chinese" card
case CMD_MIFARE_CSETBLOCK:
- MifareCSetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+ MifareCSetBlock(c->arg[0], c->arg[1], c->d.asBytes);
break;
case CMD_MIFARE_CGETBLOCK:
- MifareCGetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+ MifareCGetBlock(c->arg[0], c->arg[1], c->d.asBytes);
break;
case CMD_MIFARE_CIDENT:
MifareCIdent();
case CMD_MIFARE_DESFIRE:
MifareSendCommand(c->arg[0], c->arg[1], c->d.asBytes);
break;
-
case CMD_MIFARE_COLLECT_NONCES:
- MifareCollectNonces(c->arg[0], c->arg[1]);
break;
#endif
-
+#ifdef WITH_EMV
+ case CMD_EMV_TRANSACTION:
+ EMVTransaction();
+ break;
+ case CMD_EMV_GET_RANDOM_NUM:
+ //EMVgetUDOL();
+ break;
+ case CMD_EMV_LOAD_VALUE:
+ EMVloadvalue(c->arg[0], c->d.asBytes);
+ break;
+ case CMD_EMV_DUMP_CARD:
+ EMVdumpcard();
+#endif
#ifdef WITH_ICLASS
// Makes use of ISO14443a FPGA Firmware
case CMD_SNOOP_ICLASS:
case CMD_READER_ICLASS_REPLAY:
ReaderIClass_Replay(c->arg[0], c->d.asBytes);
break;
- case CMD_ICLASS_EML_MEMSET:
+ case CMD_ICLASS_EML_MEMSET:
emlSet(c->d.asBytes,c->arg[0], c->arg[1]);
break;
case CMD_ICLASS_WRITEBLOCK:
LED_D_OFF(); // LED D indicates field ON or OFF
break;
- case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K:
-
+ case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K: {
LED_B_ON();
uint8_t *BigBuf = BigBuf_get_addr();
size_t len = 0;
- for(size_t i=0; i<c->arg[1]; i += USB_CMD_DATA_SIZE) {
- len = MIN((c->arg[1] - i),USB_CMD_DATA_SIZE);
- cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K,i,len,BigBuf_get_traceLen(),BigBuf+c->arg[0]+i,len);
+ size_t startidx = c->arg[0];
+ uint8_t isok = FALSE;
+ // arg0 = startindex
+ // arg1 = length bytes to transfer
+ // arg2 = RFU
+ //Dbprintf("transfer to client parameters: %llu | %llu | %llu", c->arg[0], c->arg[1], c->arg[2]);
+
+ for(size_t i = 0; i < c->arg[1]; i += USB_CMD_DATA_SIZE) {
+ len = MIN( (c->arg[1] - i), USB_CMD_DATA_SIZE);
+ isok = cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K, i, len, BigBuf_get_traceLen(), BigBuf + startidx + i, len);
+ if (!isok)
+ Dbprintf("transfer to client failed :: | bytes %d", len);
}
// Trigger a finish downloading signal with an ACK frame
- cmd_send(CMD_ACK,1,0,BigBuf_get_traceLen(),getSamplingConfig(),sizeof(sample_config));
+ cmd_send(CMD_ACK, 1, 0, BigBuf_get_traceLen(), getSamplingConfig(), sizeof(sample_config));
LED_B_OFF();
break;
-
+ }
case CMD_DOWNLOADED_SIM_SAMPLES_125K: {
+ // iceman; since changing fpga_bitstreams clears bigbuff, Its better to call it before.
+ // to be able to use this one for uploading data to device
+ // arg1 = 0 upload for LF usage
+ // 1 upload for HF usage
+ if ( c->arg[1] == 0 )
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+ else
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
uint8_t *b = BigBuf_get_addr();
- memcpy(b+c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE);
- cmd_send(CMD_ACK,0,0,0,0,0);
+ memcpy( b + c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE);
+ cmd_send(CMD_ACK,1,0,0,0,0);
+ break;
+ }
+ case CMD_DOWNLOAD_EML_BIGBUF: {
+ LED_B_ON();
+ uint8_t *cardmem = BigBuf_get_EM_addr();
+ size_t len = 0;
+ for(size_t i=0; i < c->arg[1]; i += USB_CMD_DATA_SIZE) {
+ len = MIN((c->arg[1] - i), USB_CMD_DATA_SIZE);
+ cmd_send(CMD_DOWNLOADED_EML_BIGBUF, i, len, CARD_MEMORY_SIZE, cardmem + c->arg[0] + i, len);
+ }
+ // Trigger a finish downloading signal with an ACK frame
+ cmd_send(CMD_ACK, 1, 0, CARD_MEMORY_SIZE, 0, 0);
+ LED_B_OFF();
break;
- }
+ }
case CMD_READ_MEM:
ReadMem(c->arg[0]);
break;
}
common_area.flags.osimage_present = 1;
- LED_D_OFF();
- LED_C_OFF();
- LED_B_OFF();
- LED_A_OFF();
+ LEDsoff();
// Init USB device
usb_enable();
AT91C_BASE_PIOA->PIO_PDR = GPIO_PCK0;
AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_PCK0;
// PCK0 is PLL clock / 4 = 96Mhz / 4 = 24Mhz
- AT91C_BASE_PMC->PMC_PCKR[0] = AT91C_PMC_CSS_PLL_CLK |
- AT91C_PMC_PRES_CLK_4; // 4 for 24Mhz pck0, 2 for 48 MHZ pck0
+ AT91C_BASE_PMC->PMC_PCKR[0] = AT91C_PMC_CSS_PLL_CLK | AT91C_PMC_PRES_CLK_4; // 4 for 24Mhz pck0, 2 for 48 MHZ pck0
AT91C_BASE_PIOA->PIO_OER = GPIO_PCK0;
// Reset SPI
size_t rx_len;
for(;;) {
- if (usb_poll()) {
- rx_len = usb_read(rx,sizeof(UsbCommand));
- if (rx_len) {
- UsbPacketReceived(rx,rx_len);
- }
+ if ( usb_poll_validate_length() ) {
+ rx_len = usb_read(rx, sizeof(UsbCommand));
+
+ if (rx_len)
+ UsbPacketReceived(rx, rx_len);
}
WDT_HIT();
projects / proxmark3-svn / blobdiff