//-----------------------------------------------------------------------------
#include "util.h"
-//#include "proxusb.h"
+
#include "proxmark3.h"
#include "ui.h"
#include "cmdparser.h"
-#include "../include/common.h"
+#include "common.h"
#include "cmdmain.h"
#include "sleep.h"
#include "cmdhfepa.h"
unsigned int n = 0;
// delay between requests
unsigned int d = 0;
-
+
sscanf(Cmd, "%u %u %u", &m, &n, &d);
-
+
// values are expected to be > 0
m = m > 0 ? m : 1;
n = n > 0 ? n : 1;
- PrintAndLog("Collecting %u %"hhu"-byte nonces", n, m);
+ PrintAndLog("Collecting %u %u byte nonces", n, m);
PrintAndLog("Start: %u", time(NULL));
// repeat n times
for (unsigned int i = 0; i < n; i++) {
UsbCommand c = {CMD_EPA_PACE_COLLECT_NONCE, {(int)m, 0, 0}};
SendCommand(&c);
UsbCommand resp;
-
+
WaitForResponse(CMD_ACK,&resp);
// check if command failed
}
// print nonce
PrintAndLog("Length: %d, Nonce: %s", nonce_length, nonce);
+ free(nonce);
}
if (i < n - 1) {
sleep(d);
}
}
PrintAndLog("End: %u", time(NULL));
+ return 1;
+}
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+////////////////////////////////The commands lie below here/////////////////////////////////////////////////////////////////////////////////////////
+
+// perform the PACE protocol by replaying APDUs
+int CmdHFEPAPACEReplay(const char *Cmd)
+{
+ // the 4 APDUs which are replayed + their lengths
+ uint8_t msesa_apdu[41], gn_apdu[8], map_apdu[75];
+ uint8_t pka_apdu[75], ma_apdu[18], apdu_lengths[5] = {0};
+ // pointers to the arrays to be able to iterate
+ uint8_t *apdus[] = {msesa_apdu, gn_apdu, map_apdu, pka_apdu, ma_apdu};
+
+ // usage message
+ static const char *usage_msg =
+ "Please specify 5 APDUs separated by spaces. "
+ "Example:\n preplay 0022C1A4 1068000000 1086000002 1234ABCDEF 1A2B3C4D";
+
+ // Proxmark response
+ UsbCommand resp;
+
+ int skip = 0, skip_add = 0, scan_return = 0;
+ // for each APDU
+ for (int i = 0; i < sizeof(apdu_lengths); i++) {
+ // scan to next space or end of string
+ while (Cmd[skip] != ' ' && Cmd[skip] != '\0') {
+ // convert
+ scan_return = sscanf(Cmd + skip, "%2X%n",
+ (unsigned int *) (apdus[i] + apdu_lengths[i]),
+ &skip_add);
+ if (scan_return < 1) {
+ PrintAndLog((char *)usage_msg);
+ PrintAndLog("Not enough APDUs! Try again!");
+ return 0;
+ }
+ skip += skip_add;
+ apdu_lengths[i]++;
+ }
+
+ // break on EOF
+ if (Cmd[skip] == '\0') {
+ if (i < sizeof(apdu_lengths) - 1) {
+
+ PrintAndLog((char *)usage_msg);
+ return 0;
+ }
+ break;
+ }
+ // skip the space
+ skip++;
+ }
+
+ // transfer the APDUs to the Proxmark
+ UsbCommand usb_cmd;
+ usb_cmd.cmd = CMD_EPA_PACE_REPLAY;
+ for (int i = 0; i < sizeof(apdu_lengths); i++) {
+ // APDU number
+ usb_cmd.arg[0] = i + 1;
+ // transfer the APDU in several parts if necessary
+ for (int j = 0; j * sizeof(usb_cmd.d.asBytes) < apdu_lengths[i]; j++) {
+ // offset into the APDU
+ usb_cmd.arg[1] = j * sizeof(usb_cmd.d.asBytes);
+ // amount of data in this packet
+ int packet_length = apdu_lengths[i] - (j * sizeof(usb_cmd.d.asBytes));
+ if (packet_length > sizeof(usb_cmd.d.asBytes)) {
+ packet_length = sizeof(usb_cmd.d.asBytes);
+ }
+ usb_cmd.arg[2] = packet_length;
+
+ memcpy(usb_cmd.d.asBytes, // + (j * sizeof(usb_cmd.d.asBytes)),
+ apdus[i] + (j * sizeof(usb_cmd.d.asBytes)),
+ packet_length);
+ SendCommand(&usb_cmd);
+ WaitForResponse(CMD_ACK, &resp);
+ if (resp.arg[0] != 0) {
+ PrintAndLog("Transfer of APDU #%d Part %d failed!", i, j);
+ return 0;
+ }
+ }
+ }
+
+ // now perform the replay
+ usb_cmd.arg[0] = 0;
+ SendCommand(&usb_cmd);
+ WaitForResponse(CMD_ACK, &resp);
+ if (resp.arg[0] != 0) {
+ PrintAndLog("\nPACE replay failed in step %u!", (uint32_t)resp.arg[0]);
+ PrintAndLog("Measured times:");
+ PrintAndLog("MSE Set AT: %u us", resp.d.asDwords[0]);
+ PrintAndLog("GA Get Nonce: %u us", resp.d.asDwords[1]);
+ PrintAndLog("GA Map Nonce: %u us", resp.d.asDwords[2]);
+ PrintAndLog("GA Perform Key Agreement: %u us", resp.d.asDwords[3]);
+ PrintAndLog("GA Mutual Authenticate: %u us", resp.d.asDwords[4]);
+ } else {
+ PrintAndLog("PACE replay successfull!");
+ PrintAndLog("MSE Set AT: %u us", resp.d.asDwords[0]);
+ PrintAndLog("GA Get Nonce: %u us", resp.d.asDwords[1]);
+ PrintAndLog("GA Map Nonce: %u us", resp.d.asDwords[2]);
+ PrintAndLog("GA Perform Key Agreement: %u us", resp.d.asDwords[3]);
+ PrintAndLog("GA Mutual Authenticate: %u us", resp.d.asDwords[4]);
+ }
+
return 1;
}
+////////////////////////////////The new commands lie above here/////////////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
// UI-related stuff
-static const command_t CommandTable[] =
-{
+static const command_t CommandTable[] = {
{"help", CmdHelp, 1, "This help"},
{"cnonces", CmdHFEPACollectPACENonces, 0,
"<m> <n> <d> Acquire n>0 encrypted PACE nonces of size m>0 with d sec pauses"},
+ {"preplay", CmdHFEPAPACEReplay, 0,
+ "<mse> <get> <map> <pka> <ma> Perform PACE protocol by replaying given APDUs"},
{NULL, NULL, 0, NULL}
};
-int CmdHelp(const char *Cmd)
-{
+int CmdHelp(const char *Cmd) {
CmdsHelp(CommandTable);
return 0;
}
-int CmdHFEPA(const char *Cmd)
-{
+int CmdHFEPA(const char *Cmd) {
// flush
- WaitForResponseTimeout(CMD_ACK,NULL,100);
-
+ clearCommandBuffer();
+ //WaitForResponseTimeout(CMD_ACK,NULL,100);
// parse
- CmdsParse(CommandTable, Cmd);
- return 0;
-}
\ No newline at end of file
+ CmdsParse(CommandTable, Cmd);
+ return 0;
+}
projects / proxmark3-svn / blobdiff