flag needed for some compile environments

[proxmark3-svn] / common / protocols.h

diff --git a/common/protocols.h b/common/protocols.h
index d3e5f5d7d17b85f2239e9956692adf51bf55334b..b57c414fb911bae00c8e8071c0b5dbc7a095a2fe 100644 (file)
--- a/common/protocols.h
+++ b/common/protocols.h
@@ -109,20 +109,25 @@ NXP/Philips CUSTOM COMMANDS
 #define ISO14443A_CMD_WUPA       0x52
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT     0x93
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2   0x95
+#define ISO14443A_CMD_ANTICOLL_OR_SELECT_3   0x97
 #define ISO14443A_CMD_WRITEBLOCK 0xA0 // or 0xA2 ?
 #define ISO14443A_CMD_HALT       0x50
 #define ISO14443A_CMD_RATS       0xE0
 
-#define MIFARE_AUTH_KEYA           0x60
-#define MIFARE_AUTH_KEYB           0x61
-#define MIFARE_MAGICWUPC1          0x40
-#define MIFARE_MAGICWUPC2              0x43
-#define MIFARE_MAGICWIPEC              0x41
+#define MIFARE_AUTH_KEYA        0x60
+#define MIFARE_AUTH_KEYB        0x61
+#define MIFARE_MAGICWUPC1       0x40
+#define MIFARE_MAGICWUPC2       0x43
+#define MIFARE_MAGICWIPEC       0x41
 #define MIFARE_CMD_INC          0xC0
 #define MIFARE_CMD_DEC          0xC1
 #define MIFARE_CMD_RESTORE      0xC2
 #define MIFARE_CMD_TRANSFER     0xB0
 
+#define MIFARE_EV1_PERSONAL_UID 0x40
+#define MIFARE_EV1_SETMODE      0x43
+
+
 #define MIFARE_ULC_WRITE        0xA2
 //#define MIFARE_ULC__COMP_WRITE  0xA0
 #define MIFARE_ULC_AUTH_1       0x1A
@@ -180,9 +185,25 @@ NXP/Philips CUSTOM COMMANDS
 #define ISO15693_READ_MULTI_SECSTATUS 0x2C
 
 
-#define ISO_14443A 0
-#define ICLASS     1
-#define ISO_14443B 2
+// Topaz command set:
+#define        TOPAZ_REQA                                              0x26    // Request
+#define        TOPAZ_WUPA                                              0x52    // WakeUp
+#define        TOPAZ_RID                                               0x78    // Read ID
+#define        TOPAZ_RALL                                              0x00    // Read All (all bytes)
+#define        TOPAZ_READ                                              0x01    // Read (a single byte)
+#define        TOPAZ_WRITE_E                                   0x53    // Write-with-erase (a single byte)
+#define        TOPAZ_WRITE_NE                                  0x1a    // Write-no-erase (a single byte)
+// additional commands for Dynamic Memory Model
+#define TOPAZ_RSEG                                             0x10    // Read segment
+#define TOPAZ_READ8                                            0x02    // Read (eight bytes)
+#define TOPAZ_WRITE_E8                                 0x54    // Write-with-erase (eight bytes)
+#define TOPAZ_WRITE_NE8                                        0x1B    // Write-no-erase (eight bytes)
+
+
+#define ISO_14443A     0
+#define ICLASS         1
+#define ISO_14443B     2
+#define TOPAZ          3
 
 //-- Picopass fuses
 #define FUSE_FPERS   0x80
@@ -243,7 +264,7 @@ void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *
 #define T5555_PSK_RF_8              0x00000200
 #define T5555_USE_PWD               0x00000400
 #define T5555_USE_AOR               0x00000800
-#define T5555_BITRATE_SHIFT         12
+#define T5555_BITRATE_SHIFT         12 //(RF=2n+2)   ie 64=2*0x1F+2   or n = (RF-2)/2
 #define T5555_FAST_WRITE            0x00004000
 #define T5555_PAGE_SELECT           0x00008000