+ //completed by Marshmellow
+int EM4x50Read(const char *Cmd, bool verbose) {
+ uint8_t fndClk[] = {8,16,32,40,50,64,128};
+ int clk = 0;
+ int invert = 0;
+ int tol = 0;
+ int i, j, startblock, skip, block, start, end, low, high, minClk;
+ bool complete = false;
+ int tmpbuff[MAX_GRAPH_TRACE_LEN / 64];
+ uint32_t Code[6];
+ char tmp[6];
+ char tmp2[20];
+ int phaseoff;
+ high = low = 0;
+ memset(tmpbuff, 0, MAX_GRAPH_TRACE_LEN / 64);
+
+ // get user entry if any
+ sscanf(Cmd, "%i %i", &clk, &invert);
+
+ // save GraphBuffer - to restore it later
+ save_restoreGB(1);
+
+ // first get high and low values
+ for (i = 0; i < GraphTraceLen; i++) {
+ if (GraphBuffer[i] > high)
+ high = GraphBuffer[i];
+ else if (GraphBuffer[i] < low)
+ low = GraphBuffer[i];
+ }
+
+ i = 0;
+ j = 0;
+ minClk = 255;
+ // get to first full low to prime loop and skip incomplete first pulse
+ while ((GraphBuffer[i] < high) && (i < GraphTraceLen))
+ ++i;
+ while ((GraphBuffer[i] > low) && (i < GraphTraceLen))
+ ++i;
+ skip = i;
+
+ // populate tmpbuff buffer with pulse lengths
+ while (i < GraphTraceLen) {
+ // measure from low to low
+ while ((GraphBuffer[i] > low) && (i < GraphTraceLen))
+ ++i;
+ start= i;
+ while ((GraphBuffer[i] < high) && (i < GraphTraceLen))
+ ++i;
+ while ((GraphBuffer[i] > low) && (i < GraphTraceLen))
+ ++i;
+ if (j>=(MAX_GRAPH_TRACE_LEN/64)) {
+ break;
+ }
+ tmpbuff[j++]= i - start;
+ if (i-start < minClk && i < GraphTraceLen) {
+ minClk = i - start;
+ }
+ }
+ // set clock
+ if (!clk) {
+ for (uint8_t clkCnt = 0; clkCnt<7; clkCnt++) {
+ tol = fndClk[clkCnt]/8;
+ if (minClk >= fndClk[clkCnt]-tol && minClk <= fndClk[clkCnt]+1) {
+ clk=fndClk[clkCnt];
+ break;
+ }
+ }
+ if (!clk) {
+ if (verbose || g_debugMode) PrintAndLog("ERROR: EM4x50 - didn't find a clock");
+ return 0;
+ }
+ } else tol = clk/8;
+
+ // look for data start - should be 2 pairs of LW (pulses of clk*3,clk*2)
+ start = -1;
+ for (i= 0; i < j - 4 ; ++i) {
+ skip += tmpbuff[i];
+ if (tmpbuff[i] >= clk*3-tol && tmpbuff[i] <= clk*3+tol) //3 clocks
+ if (tmpbuff[i+1] >= clk*2-tol && tmpbuff[i+1] <= clk*2+tol) //2 clocks
+ if (tmpbuff[i+2] >= clk*3-tol && tmpbuff[i+2] <= clk*3+tol) //3 clocks
+ if (tmpbuff[i+3] >= clk-tol) //1.5 to 2 clocks - depends on bit following
+ {
+ start= i + 4;
+ break;
+ }
+ }
+ startblock = i + 4;
+
+ // skip over the remainder of LW
+ skip += tmpbuff[i+1] + tmpbuff[i+2] + clk;
+ if (tmpbuff[i+3]>clk)
+ phaseoff = tmpbuff[i+3]-clk;
+ else
+ phaseoff = 0;
+ // now do it again to find the end
+ end = skip;
+ for (i += 3; i < j - 4 ; ++i) {
+ end += tmpbuff[i];
+ if (tmpbuff[i] >= clk*3-tol && tmpbuff[i] <= clk*3+tol) //3 clocks
+ if (tmpbuff[i+1] >= clk*2-tol && tmpbuff[i+1] <= clk*2+tol) //2 clocks
+ if (tmpbuff[i+2] >= clk*3-tol && tmpbuff[i+2] <= clk*3+tol) //3 clocks
+ if (tmpbuff[i+3] >= clk-tol) //1.5 to 2 clocks - depends on bit following
+ {
+ complete= true;
+ break;
+ }
+ }
+ end = i;
+ // report back
+ if (verbose || g_debugMode) {
+ if (start >= 0) {
+ PrintAndLog("\nNote: one block = 50 bits (32 data, 12 parity, 6 marker)");
+ } else {
+ PrintAndLog("No data found!, clock tried:%d",clk);
+ PrintAndLog("Try again with more samples.");
+ PrintAndLog(" or after a 'data askedge' command to clean up the read");
+ return 0;
+ }
+ } else if (start < 0) return 0;
+ start = skip;
+ snprintf(tmp2, sizeof(tmp2),"%d %d 1000 %d", clk, invert, clk*47);
+ // get rid of leading crap
+ snprintf(tmp, sizeof(tmp), "%i", skip);
+ CmdLtrim(tmp);
+ bool pTest;
+ bool AllPTest = true;
+ // now work through remaining buffer printing out data blocks
+ block = 0;
+ i = startblock;
+ while (block < 6) {
+ if (verbose || g_debugMode) PrintAndLog("\nBlock %i:", block);
+ skip = phaseoff;
+
+ // look for LW before start of next block
+ for ( ; i < j - 4 ; ++i) {
+ skip += tmpbuff[i];
+ if (tmpbuff[i] >= clk*3-tol && tmpbuff[i] <= clk*3+tol)
+ if (tmpbuff[i+1] >= clk-tol)
+ break;
+ }
+ if (i >= j-4) break; //next LW not found
+ skip += clk;
+ if (tmpbuff[i+1]>clk)
+ phaseoff = tmpbuff[i+1]-clk;
+ else
+ phaseoff = 0;
+ i += 2;
+ if (ASKDemod(tmp2, false, false, 1) < 1) {
+ save_restoreGB(0);
+ return 0;
+ }
+ //set DemodBufferLen to just one block
+ DemodBufferLen = skip/clk;
+ //test parities
+ pTest = EM_ByteParityTest(DemodBuffer,DemodBufferLen,5,9,0);
+ pTest &= EM_EndParityTest(DemodBuffer,DemodBufferLen,5,9,0);
+ AllPTest &= pTest;
+ //get output
+ Code[block] = OutputEM4x50_Block(DemodBuffer,DemodBufferLen,verbose, pTest);
+ if (g_debugMode) PrintAndLog("\nskipping %d samples, bits:%d", skip, skip/clk);
+ //skip to start of next block
+ snprintf(tmp,sizeof(tmp),"%i",skip);
+ CmdLtrim(tmp);
+ block++;
+ if (i >= end) break; //in case chip doesn't output 6 blocks
+ }
+ //print full code:
+ if (verbose || g_debugMode || AllPTest){
+ if (!complete) {
+ PrintAndLog("*** Warning!");
+ PrintAndLog("Partial data - no end found!");
+ PrintAndLog("Try again with more samples.");
+ }
+ PrintAndLog("Found data at sample: %i - using clock: %i", start, clk);
+ end = block;
+ for (block=0; block < end; block++){
+ PrintAndLog("Block %d: %08x",block,Code[block]);
+ }
+ if (AllPTest) {
+ PrintAndLog("Parities Passed");
+ } else {
+ PrintAndLog("Parities Failed");
+ PrintAndLog("Try cleaning the read samples with 'data askedge'");
+ }
+ }
+
+ //restore GraphBuffer
+ save_restoreGB(0);
+ return (int)AllPTest;
+}
+
+int CmdEM4x50Read(const char *Cmd) {
+ uint8_t ctmp = param_getchar(Cmd, 0);
+ if ( ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x50_read();
+ return EM4x50Read(Cmd, true);
+}
+int CmdEM4x50Write(const char *Cmd){
+ uint8_t ctmp = param_getchar(Cmd, 0);
+ if ( ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x50_write();
+ PrintAndLog("no implemented yet");
+ return 0;
+}
+int CmdEM4x50Dump(const char *Cmd){
+ uint8_t ctmp = param_getchar(Cmd, 0);
+ if ( ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x50_dump();
+ PrintAndLog("no implemented yet");
+ return 0;
+}
+
+#define EM_PREAMBLE_LEN 6
+// download samples from device and copy to Graphbuffer
+bool downloadSamplesEM(){
+
+ // 8 bit preamble + 32 bit word response (max clock (128) * 40bits = 5120 samples)
+ uint8_t got[6000];
+ GetFromBigBuf(got, sizeof(got), 0);
+ if ( !WaitForResponseTimeout(CMD_ACK, NULL, 2500) ) {
+ PrintAndLog("command execution time out");
+ return FALSE;
+ }
+ setGraphBuf(got, sizeof(got));
+ return TRUE;
+}
+
+// em_demod
+bool doPreambleSearch(size_t *startIdx){
+
+ // sanity check
+ if ( DemodBufferLen < EM_PREAMBLE_LEN) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305 demodbuffer too small");
+ return FALSE;
+ }
+
+ // set size to 20 to only test first 14 positions for the preamble
+ size_t size = (20 > DemodBufferLen) ? DemodBufferLen : 20;
+ *startIdx = 0;
+ // skip first two 0 bits as they might have been missed in the demod
+ uint8_t preamble[EM_PREAMBLE_LEN] = {0,0,1,0,1,0};
+
+ if ( !preambleSearchEx(DemodBuffer, preamble, EM_PREAMBLE_LEN, &size, startIdx, TRUE)) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305 preamble not found :: %d", *startIdx);
+ return FALSE;
+ }
+ return TRUE;
+}
+
+bool detectFSK(){
+ // detect fsk clock
+ if (!GetFskClock("", FALSE, FALSE)) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM: FSK clock failed");
+ return FALSE;
+ }
+ // demod
+ int ans = FSKrawDemod("0 0", FALSE);
+ if (!ans) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM: FSK Demod failed");
+ return FALSE;
+ }
+ return TRUE;
+}
+// PSK clocks should be easy to detect ( but difficult to demod a non-repeating pattern... )
+bool detectPSK(){
+ int ans = GetPskClock("", FALSE, FALSE);
+ if (ans <= 0) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM: PSK clock failed");
+ return FALSE;
+ }
+ //demod
+ //try psk1 -- 0 0 6 (six errors?!?)
+ ans = PSKDemod("0 0 6", FALSE);
+ if (!ans) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM: PSK1 Demod failed");
+
+ //try psk1 inverted
+ ans = PSKDemod("0 1 6", FALSE);
+ if (!ans) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM: PSK1 inverted Demod failed");
+ return FALSE;
+ }
+ }
+ // either PSK1 or PSK1 inverted is ok from here.
+ // lets check PSK2 later.
+ return TRUE;
+}
+// try manchester - NOTE: ST only applies to T55x7 tags.
+bool detectASK_MAN(){
+ bool stcheck = FALSE;
+ int ans = ASKDemod_ext("0 0 0", FALSE, FALSE, 1, &stcheck);
+ if (!ans) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM: ASK/Manchester Demod failed");
+ return FALSE;
+ }
+ return TRUE;
+}
+bool detectASK_BI(){
+ int ans = ASKbiphaseDemod("0 0 1", FALSE);
+ if (!ans) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM: ASK/biphase normal demod failed");
+
+ ans = ASKbiphaseDemod("0 1 1", FALSE);
+ if (!ans) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM: ASK/biphase inverted demod failed");
+ return FALSE;
+ }
+ }
+ return TRUE;
+}
+
+// param: idx - start index in demoded data.
+bool setDemodBufferEM(uint32_t *word, size_t idx){
+
+ //test for even parity bits.
+ uint8_t parity[45] = {0};
+ memcpy( parity, DemodBuffer, 45);
+ if (!EMwordparitytest(parity) ){
+ PrintAndLog("DEBUG: Error - EM Parity tests failed");
+ return FALSE;
+ }
+
+ // test for even parity bits and remove them. (leave out the end row of parities so 36 bits)
+ if (!removeParity(DemodBuffer, idx + EM_PREAMBLE_LEN, 9, 0, 36)) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM, failed removing parity");
+ return FALSE;
+ }
+ setDemodBuf(DemodBuffer, 32, 0);
+ *word = bytebits_to_byteLSBF(DemodBuffer, 32);
+ return TRUE;
+}
+
+// FSK, PSK, ASK/MANCHESTER, ASK/BIPHASE, ASK/DIPHASE
+// should cover 90% of known used configs
+// the rest will need to be manually demoded for now...
+bool demodEM4x05resp(uint32_t *word) {
+ size_t idx = 0;
+ *word = 0;
+ if (detectASK_MAN() && doPreambleSearch( &idx ))
+ return setDemodBufferEM(word, idx);
+
+ if (detectASK_BI() && doPreambleSearch( &idx ))
+ return setDemodBufferEM(word, idx);
+
+ if (detectFSK() && doPreambleSearch( &idx ))
+ return setDemodBufferEM(word, idx);
+
+ if (detectPSK()) {
+ if (doPreambleSearch( &idx ))
+ return setDemodBufferEM(word, idx);
+
+ psk1TOpsk2(DemodBuffer, DemodBufferLen);
+ if (doPreambleSearch( &idx ))
+ return setDemodBufferEM(word, idx);
+ }
+ return FALSE;
+}
+
+//////////////// 4205 / 4305 commands
+int usage_lf_em4x05_dump(void) {
+ PrintAndLog("Dump EM4x05/EM4x69. Tag must be on antenna. ");
+ PrintAndLog("");
+ PrintAndLog("Usage: lf em 4x05dump [h] <pwd>");
+ PrintAndLog("Options:");
+ PrintAndLog(" h - this help");
+ PrintAndLog(" pwd - password (hex) (optional)");
+ PrintAndLog("samples:");
+ PrintAndLog(" lf em 4x05dump");
+ PrintAndLog(" lf em 4x05dump 11223344");
+ return 0;
+}
+int usage_lf_em4x05_read(void) {
+ PrintAndLog("Read EM4x05/EM4x69. Tag must be on antenna. ");
+ PrintAndLog("");
+ PrintAndLog("Usage: lf em 4x05read [h] <address> <pwd>");
+ PrintAndLog("Options:");
+ PrintAndLog(" h - this help");
+ PrintAndLog(" address - memory address to read. (0-15)");
+ PrintAndLog(" pwd - password (hex) (optional)");
+ PrintAndLog("samples:");
+ PrintAndLog(" lf em 4x05read 1");
+ PrintAndLog(" lf em 4x05read 1 11223344");
+ return 0;
+}
+int usage_lf_em4x05_write(void) {
+ PrintAndLog("Write EM4x05/4x69. Tag must be on antenna. ");
+ PrintAndLog("");
+ PrintAndLog("Usage: lf em 4x05write [h] <address> <data> <pwd>");
+ PrintAndLog("Options:");
+ PrintAndLog(" h - this help");
+ PrintAndLog(" address - memory address to write to. (0-15)");
+ PrintAndLog(" data - data to write (hex)");
+ PrintAndLog(" pwd - password (hex) (optional)");
+ PrintAndLog("samples:");
+ PrintAndLog(" lf em 4x05write 1 deadc0de");
+ PrintAndLog(" lf em 4x05write 1 deadc0de 11223344");
+ return 0;
+}
+int usage_lf_em4x05_info(void) {
+ PrintAndLog("Tag information EM4205/4305/4469//4569 tags. Tag must be on antenna.");
+ PrintAndLog("");
+ PrintAndLog("Usage: lf em 4x05info [h] <pwd>");
+ PrintAndLog("Options:");
+ PrintAndLog(" h - this help");
+ PrintAndLog(" pwd - password (hex) (optional)");
+ PrintAndLog("samples:");
+ PrintAndLog(" lf em 4x05info");
+ PrintAndLog(" lf em 4x05info deadc0de");
+ return 0;
+}
+
+int EM4x05ReadWord_ext(uint8_t addr, uint32_t pwd, bool usePwd, uint32_t *word) {
+ UsbCommand c = {CMD_EM4X_READ_WORD, {addr, pwd, usePwd}};
+ clearCommandBuffer();
+ SendCommand(&c);
+ UsbCommand resp;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 2500)){
+ PrintAndLog("Command timed out");
+ return -1;
+ }
+ if ( !downloadSamplesEM() ) {
+ return -1;
+ }
+ int testLen = (GraphTraceLen < 1000) ? GraphTraceLen : 1000;
+ if (graphJustNoise(GraphBuffer, testLen)) {
+ PrintAndLog("no tag found");
+ return -1;
+ }
+ return demodEM4x05resp(word);
+}
+
+int CmdEM4x05Dump(const char *Cmd) {
+ uint8_t addr = 0;
+ uint32_t pwd = 0;
+ bool usePwd = false;
+ uint8_t ctmp = param_getchar(Cmd, 0);
+ if ( ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x05_dump();
+
+ // for now use default input of 1 as invalid (unlikely 1 will be a valid password...)
+ pwd = param_get32ex(Cmd, 0, 1, 16);
+
+ if ( pwd != 1 )
+ usePwd = true;
+
+ int success = 1;
+ uint32_t word = 0;
+ PrintAndLog("Addr | data | ascii");
+ PrintAndLog("-----+--------+------");
+ for (; addr < 16; addr++) {
+
+ if (addr == 2) {
+ if (usePwd) {
+ PrintAndLog(" %02u | %08X", addr, pwd, word );
+ } else {
+ PrintAndLog(" 02 | cannot read");
+ }
+ } else {
+ success &= EM4x05ReadWord_ext(addr, pwd, usePwd, &word);
+ }
+ }
+
+ return success;
+}
+
+int CmdEM4x05Read(const char *Cmd) {
+ uint8_t addr;
+ uint32_t pwd;
+ bool usePwd = false;
+ uint8_t ctmp = param_getchar(Cmd, 0);
+ if ( strlen(Cmd) == 0 || ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x05_read();
+
+ addr = param_get8ex(Cmd, 0, 50, 10);
+ pwd = param_get32ex(Cmd, 1, 1, 16);
+
+ if (addr > 15) {
+ PrintAndLog("Address must be between 0 and 15");
+ return 1;
+ }
+ if ( pwd == 1 ) {
+ PrintAndLog("Reading address %02u", addr);
+ }
+ else {
+ usePwd = true;
+ PrintAndLog("Reading address %02u | password %08X", addr, pwd);
+ }
+
+ uint32_t word = 0;
+ int isOk = EM4x05ReadWord_ext(addr, pwd, usePwd, &word);
+ if (isOk)
+ PrintAndLog("Address %02d | %08X - %s", addr, word, (addr > 13) ? "Lock" : "");
+ else
+ PrintAndLog("Read Address %02d | failed",addr);
+ return isOk;
+}
+
+int CmdEM4x05Write(const char *Cmd) {
+ uint8_t ctmp = param_getchar(Cmd, 0);
+ if ( strlen(Cmd) == 0 || ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x05_write();
+
+ bool usePwd = false;
+ uint8_t addr = 50; // default to invalid address
+ uint32_t data = 0; // default to blank data
+ uint32_t pwd = 1; // default to blank password
+
+ addr = param_get8ex(Cmd, 0, 50, 10);
+ data = param_get32ex(Cmd, 1, 0, 16);
+ pwd = param_get32ex(Cmd, 2, 1, 16);
+
+ if ( addr > 15 ) {
+ PrintAndLog("Address must be between 0 and 15");
+ return 1;
+ }
+ if ( pwd == 1 )
+ PrintAndLog("Writing address %d data %08X", addr, data);
+ else {
+ usePwd = true;
+ PrintAndLog("Writing address %d data %08X using password %08X", addr, data, pwd);
+ }
+
+ uint16_t flag = (addr << 8 ) | usePwd;
+
+ UsbCommand c = {CMD_EM4X_WRITE_WORD, {flag, data, pwd}};
+ clearCommandBuffer();
+ SendCommand(&c);
+ UsbCommand resp;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 2000)){
+ PrintAndLog("Error occurred, device did not respond during write operation.");
+ return -1;
+ }
+
+ if (!downloadSamplesEM())
+ return -1;
+
+ //need 0 bits demoded (after preamble) to verify write cmd
+ uint32_t dummy = 0;
+ int isOk = demodEM4x05resp(&dummy);
+ if (isOk)
+ PrintAndLog("Write Verified");
+ else
+ PrintAndLog("Write could not be verified");
+ return isOk;
+}
+
+void printEM4x05config(uint32_t wordData) {
+ uint16_t datarate = (((wordData & 0x3F)+1)*2);
+ uint8_t encoder = ((wordData >> 6) & 0xF);
+ char enc[14];
+ memset(enc,0,sizeof(enc));
+
+ uint8_t PSKcf = (wordData >> 10) & 0x3;
+ char cf[10];
+ memset(cf,0,sizeof(cf));
+ uint8_t delay = (wordData >> 12) & 0x3;
+ char cdelay[33];
+ memset(cdelay,0,sizeof(cdelay));
+ uint8_t LWR = (wordData >> 14) & 0xF; //last word read
+
+ switch (encoder) {
+ case 0: snprintf(enc,sizeof(enc),"NRZ"); break;
+ case 1: snprintf(enc,sizeof(enc),"Manchester"); break;
+ case 2: snprintf(enc,sizeof(enc),"Biphase"); break;
+ case 3: snprintf(enc,sizeof(enc),"Miller"); break;
+ case 4: snprintf(enc,sizeof(enc),"PSK1"); break;
+ case 5: snprintf(enc,sizeof(enc),"PSK2"); break;
+ case 6: snprintf(enc,sizeof(enc),"PSK3"); break;
+ case 7: snprintf(enc,sizeof(enc),"Unknown"); break;
+ case 8: snprintf(enc,sizeof(enc),"FSK1"); break;
+ case 9: snprintf(enc,sizeof(enc),"FSK2"); break;
+ default: snprintf(enc,sizeof(enc),"Unknown"); break;
+ }
+
+ switch (PSKcf) {
+ case 0: snprintf(cf,sizeof(cf),"RF/2"); break;
+ case 1: snprintf(cf,sizeof(cf),"RF/8"); break;
+ case 2: snprintf(cf,sizeof(cf),"RF/4"); break;
+ case 3: snprintf(cf,sizeof(cf),"unknown"); break;
+ }
+
+ switch (delay) {
+ case 0: snprintf(cdelay, sizeof(cdelay),"no delay"); break;
+ case 1: snprintf(cdelay, sizeof(cdelay),"BP/8 or 1/8th bit period delay"); break;
+ case 2: snprintf(cdelay, sizeof(cdelay),"BP/4 or 1/4th bit period delay"); break;
+ case 3: snprintf(cdelay, sizeof(cdelay),"no delay"); break;
+ }
+ PrintAndLog("ConfigWord: %08X (Word 4)\n", wordData);
+ PrintAndLog("Config Breakdown:", wordData);
+ PrintAndLog(" Data Rate: %02u | RF/%u", wordData & 0x3F, datarate);
+ PrintAndLog(" Encoder: %u | %s", encoder, enc);
+ PrintAndLog(" PSK CF: %u | %s", PSKcf, cf);
+ PrintAndLog(" Delay: %u | %s", delay, cdelay);
+ PrintAndLog(" LastWordR: %02u | Address of last word for default read", LWR);
+ PrintAndLog(" ReadLogin: %u | Read Login is %s", (wordData & 0x40000)>>18, (wordData & 0x40000) ? "Required" : "Not Required");
+ PrintAndLog(" ReadHKL: %u | Read Housekeeping Words Login is %s", (wordData & 0x80000)>>19, (wordData & 0x80000) ? "Required" : "Not Required");
+ PrintAndLog("WriteLogin: %u | Write Login is %s", (wordData & 0x100000)>>20, (wordData & 0x100000) ? "Required" : "Not Required");
+ PrintAndLog(" WriteHKL: %u | Write Housekeeping Words Login is %s", (wordData & 0x200000)>>21, (wordData & 0x200000) ? "Required" : "Not Required");
+ PrintAndLog(" R.A.W.: %u | Read After Write is %s", (wordData & 0x400000)>>22, (wordData & 0x400000) ? "On" : "Off");
+ PrintAndLog(" Disable: %u | Disable Command is %s", (wordData & 0x800000)>>23, (wordData & 0x800000) ? "Accepted" : "Not Accepted");
+ PrintAndLog(" R.T.F.: %u | Reader Talk First is %s", (wordData & 0x1000000)>>24, (wordData & 0x1000000) ? "Enabled" : "Disabled");
+ PrintAndLog(" Pigeon: %u | Pigeon Mode is %s\n", (wordData & 0x4000000)>>26, (wordData & 0x4000000) ? "Enabled" : "Disabled");
+}
+
+void printEM4x05info(uint32_t block0, uint32_t serial) {
+
+ uint8_t chipType = (block0 >> 1) & 0xF;
+ uint8_t cap = (block0 >> 5) & 3;
+ uint16_t custCode = (block0 >> 9) & 0x3FF;
+
+ switch (chipType) {
+ case 9: PrintAndLog("\n Chip Type: %u | EM4305", chipType); break;
+ case 8: PrintAndLog("\n Chip Type: %u | EM4205", chipType); break;
+ case 4: PrintAndLog(" Chip Type: %u | Unknown", chipType); break;
+ case 2: PrintAndLog(" Chip Type: %u | EM4469", chipType); break;
+ //add more here when known
+ default: PrintAndLog(" Chip Type: %u Unknown", chipType); break;
+ }
+
+ switch (cap) {
+ case 3: PrintAndLog(" Cap Type: %u | 330pF",cap); break;
+ case 2: PrintAndLog(" Cap Type: %u | %spF",cap, (chipType==2)? "75":"210"); break;
+ case 1: PrintAndLog(" Cap Type: %u | 250pF",cap); break;
+ case 0: PrintAndLog(" Cap Type: %u | no resonant capacitor",cap); break;
+ default: PrintAndLog(" Cap Type: %u | unknown",cap); break;
+ }
+
+ PrintAndLog(" Cust Code: %03u | %s", custCode, (custCode == 0x200) ? "Default": "Unknown");
+ if (serial != 0)
+ PrintAndLog("\n Serial #: %08X\n", serial);
+}
+
+void printEM4x05ProtectionBits(uint32_t word) {
+ for (uint8_t i = 0; i < 15; i++) {
+ PrintAndLog(" Word: %02u | %s", i, (((1 << i) & word ) || i < 2) ? "Is Write Locked" : "Is Not Write Locked");
+ if (i==14)
+ PrintAndLog(" Word: %02u | %s", i+1, (((1 << i) & word ) || i < 2) ? "Is Write Locked" : "Is Not Write Locked");
+ }
+}
+
+//quick test for EM4x05/EM4x69 tag
+bool EM4x05IsBlock0(uint32_t *word) {
+ return EM4x05ReadWord_ext(0, 0, FALSE, word);
+}
+
+int CmdEM4x05Info(const char *Cmd) {
+#define EM_SERIAL_BLOCK 1
+#define EM_CONFIG_BLOCK 4
+#define EM_PROT1_BLOCK 14
+#define EM_PROT2_BLOCK 15
+ uint32_t pwd;
+ uint32_t word = 0, block0 = 0, serial = 0;
+ bool usePwd = false;
+ uint8_t ctmp = param_getchar(Cmd, 0);
+ if ( ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x05_info();
+
+ // for now use default input of 1 as invalid (unlikely 1 will be a valid password...)
+ pwd = param_get32ex(Cmd, 0, 1, 16);
+
+ if ( pwd != 1 )
+ usePwd = true;
+
+ // read word 0 (chip info)
+ // block 0 can be read even without a password.
+ if ( !EM4x05IsBlock0(&block0) )
+ return -1;
+
+ // read word 1 (serial #) doesn't need pwd
+ // continue if failed, .. non blocking fail.
+ EM4x05ReadWord_ext(EM_SERIAL_BLOCK, 0, false, &serial);
+ printEM4x05info(block0, serial);
+
+ // read word 4 (config block)
+ // needs password if one is set
+ if ( EM4x05ReadWord_ext(EM_CONFIG_BLOCK, pwd, usePwd, &word) != 1 )
+ return 0;
+
+ printEM4x05config(word);
+
+ // read word 14 and 15 to see which is being used for the protection bits
+ if ( EM4x05ReadWord_ext(EM_PROT1_BLOCK, pwd, usePwd, &word) != 1 ) {
+ return 0;
+ }
+ // if status bit says this is not the used protection word
+ if (!(word & 0x8000)) {
+ if ( EM4x05ReadWord_ext(EM_PROT2_BLOCK, pwd, usePwd, &word) != 1 )
+ return 0;
+ }
+ //something went wrong
+ if (!(word & 0x8000)) return 0;
+ printEM4x05ProtectionBits(word);
+ return 1;
+}
+
+static command_t CommandTable[] = {
+ {"help", CmdHelp, 1, "This help"},
+ {"410xdemod", CmdEMdemodASK, 0, "[findone] -- Extract ID from EM410x tag (option 0 for continuous loop, 1 for only 1 tag)"},
+ {"410xread", CmdEM410xRead, 1, "[clock rate] -- Extract ID from EM410x tag in GraphBuffer"},
+ {"410xsim", CmdEM410xSim, 0, "simulate EM410x tag"},
+ {"410xwatch", CmdEM410xWatch, 0, "['h'] -- Watches for EM410x 125/134 kHz tags (option 'h' for 134)"},
+ {"410xspoof", CmdEM410xWatchnSpoof, 0, "['h'] --- Watches for EM410x 125/134 kHz tags, and replays them. (option 'h' for 134)" },
+ {"410xwrite", CmdEM410xWrite, 0, "<UID> <'0' T5555> <'1' T55x7> [clock rate] -- Write EM410x UID to T5555(Q5) or T55x7 tag, optionally setting clock rate"},
+ {"4x05dump", CmdEM4x05Dump, 0, "dump EM4205/4305 tag"},
+ {"4x05info", CmdEM4x05Info, 0, "tag information EM4x05/EM4x69"},
+ {"4x05read", CmdEM4x05Read, 0, "read word data from EM4205/4305"},
+ {"4x05write", CmdEM4x05Write, 0, "write word data to EM4205/4305"},
+ {"4x50read", CmdEM4x50Read, 0, "read word data from EM4x50"},
+ {"4x50write", CmdEM4x50Write, 0, "write word data to EM4x50"},
+ {"4x50dump", CmdEM4x50Dump, 0, "dump EM4x50 tag"},
+ {NULL, NULL, 0, NULL}
projects / proxmark3-svn / blobdiff