-//-----------------------------------------------------------------------------\r
-// Definitions for all the types of commands that may be sent over USB; our\r
-// own protocol.\r
-// Jonathan Westhues, Mar 2006\r
-// Edits by Gerhard de Koning Gans, Sep 2007\r
-//-----------------------------------------------------------------------------\r
-\r
-#ifndef __USB_CMD_H\r
-#define __USB_CMD_H\r
-\r
-typedef struct {\r
- DWORD cmd;\r
- DWORD ext1;\r
- DWORD ext2;\r
- DWORD ext3;\r
- union {\r
- BYTE asBytes[48];\r
- DWORD asDwords[12];\r
- } d;\r
-} UsbCommand;\r
-\r
-// For the bootloader\r
-#define CMD_DEVICE_INFO 0x0000\r
-#define CMD_SETUP_WRITE 0x0001\r
-#define CMD_FINISH_WRITE 0x0003\r
-#define CMD_HARDWARE_RESET 0x0004\r
-#define CMD_START_FLASH 0x0005\r
-#define CMD_NACK 0x00fe\r
-#define CMD_ACK 0x00ff\r
-\r
-// For general mucking around\r
-#define CMD_DEBUG_PRINT_STRING 0x0100\r
-#define CMD_DEBUG_PRINT_INTEGERS 0x0101\r
-#define CMD_DEBUG_PRINT_BYTES 0x0102\r
-#define CMD_LCD_RESET 0x0103\r
-#define CMD_LCD 0x0104\r
-#define CMD_BUFF_CLEAR 0x0105\r
-#define CMD_READ_MEM 0x0106\r
-#define CMD_VERSION 0x0107\r
-\r
-// For low-frequency tags\r
-#define CMD_READ_TI_TYPE 0x0202\r
-#define CMD_WRITE_TI_TYPE 0x0203\r
-#define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204\r
-#define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205\r
-#define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206\r
-#define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207\r
-#define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208\r
-#define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209\r
-#define CMD_SIMULATE_TAG_125K 0x020A\r
-#define CMD_HID_DEMOD_FSK 0x020B\r
-#define CMD_HID_SIM_TAG 0x020C\r
-#define CMD_SET_LF_DIVISOR 0x020D\r
-#define CMD_LF_SIMULATE_BIDIR 0x020E\r
-\r
-// For the 13.56 MHz tags\r
-#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300\r
-#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 0x0301\r
-#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443_SIM 0x0302\r
-#define CMD_READ_SRI512_TAG 0x0303\r
-#define CMD_READER_ISO_15693 0x0310\r
-#define CMD_SIMTAG_ISO_15693 0x0311\r
-#define CMD_SIMULATE_TAG_HF_LISTEN 0x0380\r
-#define CMD_SIMULATE_TAG_ISO_14443 0x0381\r
-#define CMD_SNOOP_ISO_14443 0x0382\r
-#define CMD_SNOOP_ISO_14443a 0x0383\r
-#define CMD_SIMULATE_TAG_ISO_14443a 0x0384\r
-#define CMD_READER_ISO_14443a 0x0385\r
-#define CMD_SIMULATE_MIFARE_CARD 0x0386\r
-\r
-// For measurements of the antenna tuning\r
-#define CMD_MEASURE_ANTENNA_TUNING 0x0400\r
-#define CMD_MEASURED_ANTENNA_TUNING 0x0401\r
-#define CMD_LISTEN_READER_FIELD 0x0402\r
-\r
-// For direct FPGA control\r
-#define CMD_FPGA_MAJOR_MODE_OFF 0x0500\r
-\r
-// CMD_DEVICE_INFO response packet has flags in ext1, flag definitions:\r
-#define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0) /* Whether a bootloader that understands the common_area is present */ \r
-#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1) /* Whether a osimage that understands the common_area is present */\r
-#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2) /* Set if the bootloader is currently executing */\r
-#define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3) /* Set if the OS is currently executing */\r
-#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4) /* Set if this device understands the extend start flash command */\r
-\r
-// CMD_START_FLASH may have three arguments: start of area to flash, end of area to flash, optional magic defined below\r
-#define START_FLASH_MAGIC 0x54494f44 /* The bootrom will not allow to overwrite itself unless this magic is given as third parameter */\r
-\r
-#endif\r
+//-----------------------------------------------------------------------------
+// Jonathan Westhues, Mar 2006
+// Edits by Gerhard de Koning Gans, Sep 2007
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// Definitions for all the types of commands that may be sent over USB; our
+// own protocol.
+//-----------------------------------------------------------------------------
+
+#ifndef __USB_CMD_H
+#define __USB_CMD_H
+#ifdef _MSC_VER
+typedef DWORD uint32_t;
+typedef BYTE uint8_t;
+#define PACKED
+// stuff
+#else
+#include <stdint.h>
+#include <stdbool.h>
+#define PACKED __attribute__((packed))
+#endif
+
+#define USB_CMD_DATA_SIZE 512
+
+typedef struct {
+ uint64_t cmd;
+ uint64_t arg[3];
+ union {
+ uint8_t asBytes[USB_CMD_DATA_SIZE];
+ uint32_t asDwords[USB_CMD_DATA_SIZE/4];
+ } d;
+} PACKED UsbCommand;
+// A struct used to send sample-configs over USB
+typedef struct{
+ uint8_t decimation;
+ uint8_t bits_per_sample;
+ bool averaging;
+ int divisor;
+ int trigger_threshold;
+} sample_config;
+
+// For the bootloader
+#define CMD_DEVICE_INFO 0x0000
+#define CMD_SETUP_WRITE 0x0001
+#define CMD_FINISH_WRITE 0x0003
+#define CMD_HARDWARE_RESET 0x0004
+#define CMD_START_FLASH 0x0005
+#define CMD_NACK 0x00fe
+#define CMD_ACK 0x00ff
+
+// For general mucking around
+#define CMD_DEBUG_PRINT_STRING 0x0100
+#define CMD_DEBUG_PRINT_INTEGERS 0x0101
+#define CMD_DEBUG_PRINT_BYTES 0x0102
+#define CMD_LCD_RESET 0x0103
+#define CMD_LCD 0x0104
+#define CMD_BUFF_CLEAR 0x0105
+#define CMD_READ_MEM 0x0106
+#define CMD_VERSION 0x0107
+
+// For low-frequency tags
+#define CMD_READ_TI_TYPE 0x0202
+#define CMD_WRITE_TI_TYPE 0x0203
+#define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204
+#define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205
+#define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206
+#define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207
+#define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208
+#define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209
+#define CMD_SIMULATE_TAG_125K 0x020A
+#define CMD_HID_DEMOD_FSK 0x020B
+#define CMD_HID_SIM_TAG 0x020C
+#define CMD_SET_LF_DIVISOR 0x020D
+#define CMD_LF_SIMULATE_BIDIR 0x020E
+#define CMD_SET_ADC_MUX 0x020F
+#define CMD_HID_CLONE_TAG 0x0210
+#define CMD_EM410X_WRITE_TAG 0x0211
+#define CMD_INDALA_CLONE_TAG 0x0212
+// for 224 bits UID
+#define CMD_INDALA_CLONE_TAG_L 0x0213
+#define CMD_T55XX_READ_BLOCK 0x0214
+#define CMD_T55XX_WRITE_BLOCK 0x0215
+#define CMD_T55XX_READ_TRACE 0x0216
+#define CMD_PCF7931_READ 0x0217
+#define CMD_EM4X_READ_WORD 0x0218
+#define CMD_EM4X_WRITE_WORD 0x0219
+#define CMD_IO_DEMOD_FSK 0x021A
+#define CMD_IO_CLONE_TAG 0x021B
+#define CMD_EM410X_DEMOD 0x021c
+// Sampling configuration for LF reader/snooper
+#define CMD_SET_LF_SAMPLING_CONFIG 0x021d
+#define CMD_FSK_SIM_TAG 0x021E
+#define CMD_ASK_SIM_TAG 0x021F
+#define CMD_PSK_SIM_TAG 0x0220
+
+/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
+
+// For the 13.56 MHz tags
+#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300
+#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 0x0301
+#define CMD_READ_SRI512_TAG 0x0303
+#define CMD_READ_SRIX4K_TAG 0x0304
+#define CMD_ISO_14443B_COMMAND 0x0305
+#define CMD_READER_ISO_15693 0x0310
+#define CMD_SIMTAG_ISO_15693 0x0311
+#define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 0x0312
+#define CMD_ISO_15693_COMMAND 0x0313
+#define CMD_ISO_15693_COMMAND_DONE 0x0314
+#define CMD_ISO_15693_FIND_AFI 0x0315
+#define CMD_ISO_15693_DEBUG 0x0316
+#define CMD_LF_SNOOP_RAW_ADC_SAMPLES 0x0317
+
+// For Hitag2 transponders
+#define CMD_SNOOP_HITAG 0x0370
+#define CMD_SIMULATE_HITAG 0x0371
+#define CMD_READER_HITAG 0x0372
+
+#define CMD_SIMULATE_TAG_HF_LISTEN 0x0380
+#define CMD_SIMULATE_TAG_ISO_14443 0x0381
+#define CMD_SNOOP_ISO_14443 0x0382
+#define CMD_SNOOP_ISO_14443a 0x0383
+#define CMD_SIMULATE_TAG_ISO_14443a 0x0384
+#define CMD_READER_ISO_14443a 0x0385
+#define CMD_SIMULATE_TAG_LEGIC_RF 0x0387
+#define CMD_READER_LEGIC_RF 0x0388
+#define CMD_WRITER_LEGIC_RF 0x0389
+#define CMD_EPA_PACE_COLLECT_NONCE 0x038A
+//#define CMD_EPA_ 0x038B
+
+#define CMD_SNOOP_ICLASS 0x0392
+#define CMD_SIMULATE_TAG_ICLASS 0x0393
+#define CMD_READER_ICLASS 0x0394
+#define CMD_READER_ICLASS_REPLAY 0x0395
+#define CMD_ICLASS_ISO14443A_WRITE 0x0397
+#define CMD_ICLASS_EML_MEMSET 0x0398
+
+// For measurements of the antenna tuning
+#define CMD_MEASURE_ANTENNA_TUNING 0x0400
+#define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401
+#define CMD_MEASURED_ANTENNA_TUNING 0x0410
+#define CMD_LISTEN_READER_FIELD 0x0420
+
+// For direct FPGA control
+#define CMD_FPGA_MAJOR_MODE_OFF 0x0500
+
+// For mifare commands
+#define CMD_MIFARE_SET_DBGMODE 0x0600
+#define CMD_MIFARE_EML_MEMCLR 0x0601
+#define CMD_MIFARE_EML_MEMSET 0x0602
+#define CMD_MIFARE_EML_MEMGET 0x0603
+#define CMD_MIFARE_EML_CARDLOAD 0x0604
+
+// magic chinese card commands
+#define CMD_MIFARE_CSETBLOCK 0x0605
+#define CMD_MIFARE_CGETBLOCK 0x0606
+#define CMD_MIFARE_CIDENT 0x0607
+
+#define CMD_SIMULATE_MIFARE_CARD 0x0610
+
+#define CMD_READER_MIFARE 0x0611
+#define CMD_MIFARE_NESTED 0x0612
+
+#define CMD_MIFARE_READBL 0x0620
+#define CMD_MIFAREU_READBL 0x0720
+
+#define CMD_MIFARE_READSC 0x0621
+#define CMD_MIFAREU_READCARD 0x0721
+
+#define CMD_MIFARE_WRITEBL 0x0622
+#define CMD_MIFAREU_WRITEBL 0x0722
+#define CMD_MIFAREU_WRITEBL_COMPAT 0x0723
+
+#define CMD_MIFARE_CHKKEYS 0x0623
+
+#define CMD_MIFARE_SNIFFER 0x0630
+
+//ultralightC
+#define CMD_MIFAREUC_AUTH1 0x0724
+#define CMD_MIFAREUC_AUTH2 0x0725
+#define CMD_MIFAREUC_READCARD 0x0726
+#define CMD_MIFAREUC_SETPWD 0x0727
+#define CMD_MIFAREU_SETUID 0x0728
+
+// mifare desfire
+#define CMD_MIFARE_DESFIRE_READBL 0x0728
+#define CMD_MIFARE_DESFIRE_WRITEBL 0x0729
+#define CMD_MIFARE_DESFIRE_AUTH1 0x072a
+#define CMD_MIFARE_DESFIRE_AUTH2 0x072b
+#define CMD_MIFARE_DES_READER 0x072c
+#define CMD_MIFARE_DESFIRE_INFO 0x072d
+#define CMD_MIFARE_DESFIRE 0x072e
+
+#define CMD_MIFARE_COLLECT_NONCES 0x072f
+
+#define CMD_UNKNOWN 0xFFFF
+
+
+//Mifare simulation flags
+#define FLAG_INTERACTIVE 0x01
+#define FLAG_4B_UID_IN_DATA 0x02
+#define FLAG_7B_UID_IN_DATA 0x04
+#define FLAG_NR_AR_ATTACK 0x08
+
+
+//Iclass reader flags
+#define FLAG_ICLASS_READER_ONLY_ONCE 0x01
+#define FLAG_ICLASS_READER_CC 0x02
+#define FLAG_ICLASS_READER_CSN 0x04
+#define FLAG_ICLASS_READER_CONF 0x08
+#define FLAG_ICLASS_READER_AA 0x10
+
+
+
+// CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
+/* Whether a bootloader that understands the common_area is present */
+#define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
+
+/* Whether a osimage that understands the common_area is present */
+#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
+
+/* Set if the bootloader is currently executing */
+#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
+
+/* Set if the OS is currently executing */
+#define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
+
+/* Set if this device understands the extend start flash command */
+#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
+
+/* CMD_START_FLASH may have three arguments: start of area to flash,
+ end of area to flash, optional magic.
+ The bootrom will not allow to overwrite itself unless this magic
+ is given as third parameter */
+
+#define START_FLASH_MAGIC 0x54494f44 // 'DOIT'
+
+#endif
projects / proxmark3-svn / blobdiff