-CC = arm-elf-gcc\r
-AS = arm-elf-as\r
-LD = arm-elf-ld\r
-OBJCOPY = arm-elf-objcopy\r
-\r
-OBJDIR = obj\r
-\r
-INCLUDE = -I../include\r
-\r
-INCLUDES = ../include/proxmark3.h ../include/at91sam7s128.h ../include/config_gpio.h ../include/usb_cmd.h apps.h\r
-LIB = "..\..\devkitARM\lib\gcc\arm-elf\4.1.0\interwork"\r
-\r
-# Add the "-DWITH_LCD" flag in CLFAGS to add support for LCD\r
-# and add OBJLCD to OBJ too\r
-CFLAGS = -O6 -c $(INCLUDE) -Wall\r
-\r
-OBJLCD = $(OBJDIR)/fonts.o \\r
- $(OBJDIR)/LCD.o\r
-\r
-OBJ = $(OBJDIR)/start.o \\r
- $(OBJDIR)/appmain.o \\r
- $(OBJDIR)/fpga.o \\r
- $(OBJDIR)/iso14443.o \\r
- $(OBJDIR)/iso14443a.o \\r
- $(OBJDIR)/iso15693.o \\r
- $(OBJDIR)/util.o\r
-\r
-OBJFPGA = \\r
- $(OBJDIR)/fpgaimg.o\r
-\r
-OBJCOMMON = \\r
- $(OBJDIR)/usb.o\r
-\r
-all: osimage.s19\r
-\r
-$(OBJDIR)/fpgaimage.s19: $(OBJDIR)/fpgaimg.o\r
- @echo obj/fpgaimage.s19\r
- @$(LD) -g -Tldscript-fpga -o $(OBJDIR)\fpgaimage.elf $(OBJDIR)/fpgaimg.o\r
- @$(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)\fpgaimage.elf $(OBJDIR)\fpgaimage.s19\r
-\r
-$(OBJDIR)/osimage.s19: $(OBJ) $(OBJCOMMON)\r
- @echo obj/osimage.s19\r
- @$(LD) -g -Tldscript -o $(OBJDIR)\osimage.elf $(OBJ) $(OBJCOMMON) $(LIB)\libgcc.a\r
- @$(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)\osimage.elf $(OBJDIR)\osimage.s19\r
-\r
-osimage.s19: $(OBJDIR)/osimage.s19 $(OBJDIR)/fpgaimage.s19\r
- @echo osimage.s19\r
-\r
-$(OBJ): $(@B).c $(INCLUDES)\r
- @echo $(@B).c\r
- @$(CC) $(CFLAGS) -mthumb -mthumb-interwork $(@B).c -o $(OBJDIR)/$(@B).o\r
-\r
-$(OBJCOMMON): ../common/$(@B).c $(INCLUDES)\r
- @echo $(@B).c\r
- @$(CC) $(CFLAGS) -mthumb -mthumb-interwork ../common/$(@B).c -o $(OBJDIR)/$(@B).o\r
-\r
-$(OBJFPGA): $(@B).c $(INCLUDES)\r
- @echo $(@B).c\r
- @$(CC) $(CFLAGS) -mthumb -mthumb-interwork $(@B).c -o $(OBJDIR)/$(@B).o\r
-\r
-clean:\r
- del /q obj\*.o\r
- del /q obj\*.elf\r
- del /q obj\*.s19\r
+#-----------------------------------------------------------------------------
+# This code is licensed to you under the terms of the GNU GPL, version 2 or,
+# at your option, any later version. See the LICENSE.txt file for the text of
+# the license.
+#-----------------------------------------------------------------------------
+# Makefile for armsrc, see ../common/Makefile.common for common settings
+#-----------------------------------------------------------------------------
+
+APP_INCLUDES = apps.h
+
+#remove one of the following defines and comment out the relevant line
+#in the next section to remove that particular feature from compilation
+APP_CFLAGS = -DWITH_ISO14443a_StandAlone -DWITH_LF -DWITH_ISO15693 -DWITH_ISO14443a -DWITH_ISO14443b -DWITH_ICLASS -DWITH_LEGICRF -DWITH_HITAG -DWITH_CRC -DON_DEVICE -DWITH_HFSNOOP \
+ -fno-strict-aliasing -ffunction-sections -fdata-sections
+#-DWITH_LCD
+
+#SRC_LCD = fonts.c LCD.c
+SRC_LF = lfops.c hitag2.c hitagS.c lfsampling.c pcf7931.c lfdemod.c protocols.c
+SRC_ISO15693 = iso15693.c iso15693tools.c
+SRC_ISO14443a = epa.c iso14443a.c mifareutil.c mifarecmd.c mifaresniff.c mifaresim.c
+SRC_ISO14443b = iso14443b.c
+SRC_CRAPTO1 = crypto1.c des.c
+SRC_CRC = iso14443crc.c crc.c crc16.c crc32.c parity.c
+
+#the FPGA bitstream files. Note: order matters!
+FPGA_BITSTREAMS = fpga_lf.bit fpga_hf.bit
+
+#the zlib source files required for decompressing the fpga config at run time
+SRC_ZLIB = inflate.c inffast.c inftrees.c adler32.c zutil.c
+#additional defines required to compile zlib
+ZLIB_CFLAGS = -DZ_SOLO -DZ_PREFIX -DNO_GZIP -DZLIB_PM3_TUNED
+APP_CFLAGS += $(ZLIB_CFLAGS)
+# zlib includes:
+APP_CFLAGS += -I../zlib
+
+# Compile these in thumb mode (small size)
+THUMBSRC = start.c \
+ $(SRC_LCD) \
+ $(SRC_ISO15693) \
+ $(SRC_LF) \
+ $(SRC_ZLIB) \
+ appmain.c \
+ printf.c \
+ util.c \
+ string.c \
+ usb_cdc.c \
+ cmd.c
+
+# These are to be compiled in ARM mode
+ARMSRC = fpgaloader.c \
+ legicrf.c \
+ $(SRC_ISO14443a) \
+ $(SRC_ISO14443b) \
+ $(SRC_CRAPTO1) \
+ $(SRC_CRC) \
+ legic_prng.c \
+ iclass.c \
+ BigBuf.c \
+ optimized_cipher.c \
+ hfsnoop.c
+
+# Do not move this inclusion before the definition of {THUMB,ASM,ARM}SRC
+include ../common/Makefile.common
+
+OBJS = $(OBJDIR)/fullimage.s19
+FPGA_COMPRESSOR = ../client/fpga_compress
+
+all: $(OBJS)
+
+.DELETE_ON_ERROR:
+
+$(OBJDIR)/fpga_all.o: $(OBJDIR)/fpga_all.bit.z
+ $(OBJCOPY) -O elf32-littlearm -I binary -B arm --prefix-sections=fpga_all_bit $^ $@
+
+$(OBJDIR)/fpga_all.bit.z: $(FPGA_BITSTREAMS) $(FPGA_COMPRESSOR)
+ $(FPGA_COMPRESSOR) $(filter %.bit,$^) $@
+
+$(FPGA_COMPRESSOR):
+ make -C ../client $(notdir $(FPGA_COMPRESSOR))
+
+$(OBJDIR)/fullimage.stage1.elf: $(VERSIONOBJ) $(OBJDIR)/fpga_all.o $(THUMBOBJ) $(ARMOBJ)
+ $(CC) $(LDFLAGS) -Wl,-T,ldscript,-Map,$(patsubst %.elf,%.map,$@) -o $@ $^ $(LIBS)
+
+$(OBJDIR)/fullimage.nodata.bin: $(OBJDIR)/fullimage.stage1.elf
+ $(OBJCOPY) -O binary -I elf32-littlearm --remove-section .data $^ $@
+
+$(OBJDIR)/fullimage.nodata.o: $(OBJDIR)/fullimage.nodata.bin
+ $(OBJCOPY) -O elf32-littlearm -I binary -B arm --rename-section .data=stage1_image $^ $@
+
+$(OBJDIR)/fullimage.data.bin: $(OBJDIR)/fullimage.stage1.elf
+ $(OBJCOPY) -O binary -I elf32-littlearm --only-section .data $^ $@
+
+$(OBJDIR)/fullimage.data.bin.z: $(OBJDIR)/fullimage.data.bin $(FPGA_COMPRESSOR)
+ $(FPGA_COMPRESSOR) $(filter %.bin,$^) $@
+
+$(OBJDIR)/fullimage.data.o: $(OBJDIR)/fullimage.data.bin.z
+ $(OBJCOPY) -O elf32-littlearm -I binary -B arm --rename-section .data=compressed_data $^ $@
+
+$(OBJDIR)/fullimage.elf: $(OBJDIR)/fullimage.nodata.o $(OBJDIR)/fullimage.data.o
+ $(CC) $(LDFLAGS) -Wl,-T,ldscript,-e,_osimage_entry,-Map,$(patsubst %.elf,%.map,$@) -o $@ $^
+
+tarbin: $(OBJS)
+ $(TAR) $(TARFLAGS) ../proxmark3-$(platform)-bin.tar $(OBJS:%=armsrc/%) $(OBJS:%.s19=armsrc/%.elf)
+
+clean:
+ $(DELETE) $(OBJDIR)$(PATHSEP)*.o
+ $(DELETE) $(OBJDIR)$(PATHSEP)*.elf
+ $(DELETE) $(OBJDIR)$(PATHSEP)*.s19
+ $(DELETE) $(OBJDIR)$(PATHSEP)*.map
+ $(DELETE) $(OBJDIR)$(PATHSEP)*.d
+ $(DELETE) $(OBJDIR)$(PATHSEP)*.z
+ $(DELETE) $(OBJDIR)$(PATHSEP)*.bin
+ $(DELETE) version.c
+
+.PHONY: all clean help
+help:
+ @echo Multi-OS Makefile, you are running on $(DETECTED_OS)
+ @echo Possible targets:
+ @echo + all - Build the full image $(OBJDIR)/fullimage.s19
+ @echo + clean - Clean $(OBJDIR)
+
projects / proxmark3-svn / blobdiff