CHG: "hf legic write" started to change this command to the updated code

[proxmark3-svn] / tools / at91sam7s256-armusbocd-flash-program.cfg

diff --git a/tools/at91sam7s256-armusbocd-flash-program.cfg b/tools/at91sam7s256-armusbocd-flash-program.cfg
index 2dce014f5a5f76ee10656743144144dbddda1c1a..1884407ae42e5f9a99f165fadc6cecac9b3784df 100644 (file)
--- a/tools/at91sam7s256-armusbocd-flash-program.cfg
+++ b/tools/at91sam7s256-armusbocd-flash-program.cfg
@@ -1,39 +1,39 @@
-#define our ports\r
-telnet_port 4444\r
-gdb_port 3333\r
-\r
-#commands specific to the Olimex ARM-USB-OCD Dongle\r
-interface ft2232\r
-ft2232_device_desc "Olimex OpenOCD JTAG"\r
-ft2232_layout "olimex-jtag"\r
-ft2232_vid_pid 0x15BA 0x0003\r
-jtag_speed 2\r
-jtag_nsrst_delay 200\r
-jtag_ntrst_delay 200\r
-\r
-#reset_config <signals> [combination] [trst_type] [srst_type]\r
-reset_config srst_only srst_pulls_trst\r
-\r
-#jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>\r
-jtag_device 4 0x1 0xf 0xe\r
-\r
-#daemon_startup <'attach'|'reset'>\r
-daemon_startup reset\r
-\r
-#target <type> <endianess> <reset_mode> <jtag#> [variant]\r
-target arm7tdmi little run_and_init 0 arm7tdmi_r4\r
-\r
-#run_and_halt_time <target#> <time_in_ms>\r
-run_and_halt_time 0 30\r
-\r
-# commands below are specific to AT91sam7 Flash Programming\r
-# ---------------------------------------------------------\r
-\r
-#target_script specifies the flash programming script file\r
-target_script 0 reset script.ocd\r
-\r
-#working_area <target#> <address> <size> <'backup'|'nobackup'>\r
-working_area 0 0x40000000 0x4000 nobackup\r
-\r
-#flash bank at91sam7 0 0 0 0 <target#>\r
-flash bank at91sam7 0 0 0 0 0\r
+#define our ports
+telnet_port 4444
+gdb_port 3333
+
+#commands specific to the Olimex ARM-USB-OCD Dongle
+interface ft2232
+ft2232_device_desc "Olimex OpenOCD JTAG"
+ft2232_layout "olimex-jtag"
+ft2232_vid_pid 0x15BA 0x0003
+jtag_speed 2
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
+#reset_config <signals> [combination] [trst_type] [srst_type]
+reset_config srst_only srst_pulls_trst
+
+#jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>
+jtag_device 4 0x1 0xf 0xe
+
+#daemon_startup <'attach'|'reset'>
+daemon_startup reset
+
+#target <type> <endianess> <reset_mode> <jtag#> [variant]
+target arm7tdmi little run_and_init 0 arm7tdmi_r4
+
+#run_and_halt_time <target#> <time_in_ms>
+run_and_halt_time 0 30
+
+# commands below are specific to AT91sam7 Flash Programming
+# ---------------------------------------------------------
+
+#target_script specifies the flash programming script file
+target_script 0 reset script.ocd
+
+#working_area <target#> <address> <size> <'backup'|'nobackup'>
+working_area 0 0x40000000 0x4000 nobackup
+
+#flash bank at91sam7 0 0 0 0 <target#>
+flash bank at91sam7 0 0 0 0 0