ADD: using @holiman's "ubs_poll_validate_length() function in some device-side...

[proxmark3-svn] / common / protocols.h

diff --git a/common/protocols.h b/common/protocols.h
index 8d4c08c25bdddecdb3791346f32beab40e44ac22..2de52b4d42e49ab29310bdd290f72cd6ca1811a2 100644 (file)
--- a/common/protocols.h
+++ b/common/protocols.h
@@ -31,6 +31,9 @@ ISO14443B
        05 = REQB
        1D = ATTRIB
        50 = HALT
+       
+       BA = PING (reader -> tag)
+       AB = PONG (tag -> reader)
 SRIX4K (tag does not respond to 05)
        06 00 = INITIATE
        0E xx = SELECT ID (xx = Chip-ID)
@@ -88,7 +91,29 @@ NXP/Philips CUSTOM COMMANDS
        BA = Enable Privacy
        BB = 64bit Password Protection
        40 = Long Range CMD (Standard ISO/TR7003:1990)
-               */
+
+ISO 7816-4 Basic interindustry commands. For command APDU's.
+       B0 = READ BINARY
+       D0 = WRITE BINARY
+       D6 = UPDATE BINARY
+       0E = ERASE BINARY
+       B2 = READ RECORDS
+       D2 = WRITE RECORDS
+       E2 = APPEND RECORD
+       DC = UPDATE RECORD
+       CA = GET DATA
+       DA = PUT DATA
+       A4 = SELECT FILE
+       20 = VERIFY
+       88 = INTERNAL AUTHENTICATION
+       82 = EXTERNAL AUTHENTICATION
+       B4 = GET CHALLENGE
+       70 = MANAGE CHANNEL
+
+       For response APDU's
+       90 00 = OK
+       6x xx = ERROR
+*/
 
 #define ICLASS_CMD_ACTALL           0x0A
 #define ICLASS_CMD_READ_OR_IDENTIFY 0x0C
@@ -109,7 +134,7 @@ NXP/Philips CUSTOM COMMANDS
 #define ISO14443A_CMD_WUPA       0x52
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT     0x93
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2   0x95
-#define ISO14443A_CMD_WRITEBLOCK 0xA0 // or 0xA2 ?
+#define ISO14443A_CMD_WRITEBLOCK 0xA0
 #define ISO14443A_CMD_HALT       0x50
 #define ISO14443A_CMD_RATS       0xE0
 
@@ -123,8 +148,8 @@ NXP/Philips CUSTOM COMMANDS
 #define MIFARE_CMD_RESTORE      0xC2
 #define MIFARE_CMD_TRANSFER     0xB0
 
-#define MIFARE_ULC_WRITE               0xA2
-//#define MIFARE_ULC__COMP_WRITE 0xA0
+#define MIFARE_ULC_WRITE        0xA2
+//#define MIFARE_ULC__COMP_WRITE  0xA0
 #define MIFARE_ULC_AUTH_1       0x1A
 #define MIFARE_ULC_AUTH_2       0xAF
 
@@ -159,6 +184,8 @@ NXP/Philips CUSTOM COMMANDS
 #define ISO14443B_RESET        0x0C
 #define ISO14443B_COMPLETION   0x0F
 #define ISO14443B_AUTHENTICATE 0x0A
+#define ISO14443B_PING            0xBA
+#define ISO14443B_PONG            0xAB
 
 //First byte is 26
 #define ISO15693_INVENTORY     0x01
@@ -193,10 +220,11 @@ NXP/Philips CUSTOM COMMANDS
 #define TOPAZ_WRITE_NE8                                        0x1B    // Write-no-erase (eight bytes)
 
 
-#define ISO_14443A 0
-#define ICLASS     1
-#define ISO_14443B 2
+#define ISO_14443A     0
+#define ICLASS         1
+#define ISO_14443B     2
 #define TOPAZ          3
+#define ISO_7816_4  4
 
 //-- Picopass fuses
 #define FUSE_FPERS   0x80
@@ -208,7 +236,28 @@ NXP/Philips CUSTOM COMMANDS
 #define FUSE_FPROD0  0x02
 #define FUSE_RA      0x01
 
+// ISO 7816-4 Basic interindustry commands. For command APDU's.
+#define ISO7816_READ_BINARY 0xB0
+#define ISO7816_WRITE_BINARY 0xD0
+#define ISO7816_UPDATE_BINARY 0xD6
+#define ISO7816_ERASE_BINARY 0x0E
+#define ISO7816_READ_RECORDS 0xB2
+#define ISO7816_WRITE_RECORDS 0xD2
+#define ISO7816_APPEND_RECORD 0xE2
+#define ISO7816_UPDATE_RECORD 0xDC
+#define ISO7816_GET_DATA 0xCA
+#define ISO7816_PUT_DATA 0xDA
+#define ISO7816_SELECT_FILE 0xA4
+#define ISO7816_VERIFY 0x20
+#define ISO7816_INTERNAL_AUTHENTICATION 0x88
+#define ISO7816_EXTERNAL_AUTHENTICATION 0x82
+#define ISO7816_GET_CHALLENGE 0xB4
+#define ISO7816_MANAGE_CHANNEL 0x70
 
+// ISO7816-4   For response APDU's
+#define ISO7816_OK     0x9000
+//     6x xx = ERROR
+       
 void printIclassDumpInfo(uint8_t* iclass_dump);
 
 #endif // PROTOCOLS_H