// Declare globals.
// Serial port that we are communicating with the PM3 on.
-static serial_port* port;
+static serial_port sp;
// If TRUE, then there is no active connection to the PM3, and we will drop commands sent.
static bool offline;
// flasher, as it means SendCommand is no longer async, and can't be used as a
// buffer for a pending command when the connection is re-established.
static UsbCommand txcmd;
-static bool txcmd_pending;
+volatile static bool txcmd_pending = false;
// Used by UsbReceiveCommand as a ring buffer for messages that are yet to be
// processed by a command handler (WaitForResponse{,Timeout})
// These wrappers are required because it is not possible to access a static
// global variable outside of the context of a single file.
-void SetSerialPort(serial_port* new_port) {
- port = new_port;
-}
-
-serial_port* GetSerialPort() {
- return port;
-}
-
void SetOffline(bool new_offline) {
offline = new_offline;
}
return offline;
}
+bool OpenProxmark(char *portname, bool waitCOMPort, int timeout) {
+ if (!waitCOMPort) {
+ sp = uart_open(portname);
+ } else {
+ printf("Waiting for Proxmark to appear on %s ", portname);
+ fflush(stdout);
+ int openCount = 0;
+ do {
+ sp = uart_open(portname);
+ msleep(1000);
+ printf(".");
+ fflush(stdout);
+ } while(++openCount < timeout && (sp == INVALID_SERIAL_PORT || sp == CLAIMED_SERIAL_PORT));
+ printf("\n");
+ }
+
+ // check result of uart opening
+ if (sp == INVALID_SERIAL_PORT) {
+ printf("ERROR: invalid serial port\n");
+ return false;
+ } else if (sp == CLAIMED_SERIAL_PORT) {
+ printf("ERROR: serial port is claimed by another process\n");
+ return false;
+ } else {
+ return true;
+ }
+}
+
+void CloseProxmark(void) {
+ uart_close(sp);
+}
+
void SendCommand(UsbCommand *c) {
#ifdef COMMS_DEBUG
printf("Sending %04x cmd\n", c->cmd);
#endif
if (offline) {
- PrintAndLog("Sending bytes to proxmark failed - offline");
- return;
+ PrintAndLog("Sending bytes to proxmark failed - offline");
+ return;
}
- /**
+ /**
The while-loop below causes hangups at times, when the pm3 unit is unresponsive
or disconnected. The main console thread is alive, but comm thread just spins here.
Not good.../holiman
**/
while(txcmd_pending);
+
txcmd = *c;
txcmd_pending = true;
}
+
/**
* @brief This method should be called when sending a new command to the pm3. In case any old
* responses from previous commands are stored in the buffer, a call to this method should clear them.
return 1;
}
-//-----------------------------------------------------------------------------
-// Entry point into our code: called whenever we received a packet over USB
-// that we weren't necessarily expecting, for example a debug print.
-//-----------------------------------------------------------------------------
-void UsbCommandReceived(UsbCommand *UC)
+
+static void UsbCommandReceived(UsbCommand *UC)
{
switch(UC->cmd) {
-
- // First check if we are handling a debug message
- case CMD_DEBUG_PRINT_STRING: {
- char s[USB_CMD_DATA_SIZE+1];
- memset(s, 0x00, sizeof(s));
- size_t len = MIN(UC->arg[0],USB_CMD_DATA_SIZE);
- memcpy(s,UC->d.asBytes,len);
- PrintAndLog("#db# %s", s);
- return;
- }
-
- case CMD_DEBUG_PRINT_INTEGERS: {
- PrintAndLog("#db# %08x, %08x, %08x \r\n", UC->arg[0], UC->arg[1], UC->arg[2]);
- return;
- }
-
- case CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K: {
- // FIXME: This does unsanitised copies into memory when we don't know
- // the size of the buffer.
- if (sample_buf) {
+ // First check if we are handling a debug message
+ case CMD_DEBUG_PRINT_STRING: {
+ char s[USB_CMD_DATA_SIZE+1];
+ memset(s, 0x00, sizeof(s));
+ size_t len = MIN(UC->arg[0],USB_CMD_DATA_SIZE);
+ memcpy(s,UC->d.asBytes,len);
+ PrintAndLog("#db# %s", s);
+ return;
+ } break;
+
+ case CMD_DEBUG_PRINT_INTEGERS: {
+ PrintAndLog("#db# %08x, %08x, %08x \r\n", UC->arg[0], UC->arg[1], UC->arg[2]);
+ return;
+ } break;
+
+ case CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K: {
+ // FIXME: This does unsanitised copies into memory when we don't know
+ // the size of the buffer.
memcpy(sample_buf+(UC->arg[0]),UC->d.asBytes,UC->arg[1]);
- }
- return;
- }
+ return;
+ } break;
- default: {
- storeCommand(UC);
- return;
- }
+ default:
+ storeCommand(UC);
+ break;
}
+
}
-// Gets a single command from a proxmark3 device. This should never be used
-// with the full client.
-//
-// @param conn A receiver_arg structure.
-// @param command A buffer to store the received command.
-bool ReceiveCommand(receiver_arg* conn, UsbCommand* command) {
- // Local recieve buffer
+
+void
+#ifdef __has_attribute
+#if __has_attribute(force_align_arg_pointer)
+__attribute__((force_align_arg_pointer))
+#endif
+#endif
+*uart_receiver(void *targ) {
+ receiver_arg *conn = (receiver_arg*)targ;
size_t rxlen;
- byte_t rx[sizeof(UsbCommand)];
- byte_t* prx = rx;
+ uint8_t rx[sizeof(UsbCommand)];
+ uint8_t *prx = rx;
while (conn->run) {
rxlen = 0;
- if (uart_receive(port, prx, sizeof(UsbCommand) - (prx-rx), &rxlen) && rxlen) {
+ if (uart_receive(sp, prx, sizeof(UsbCommand) - (prx-rx), &rxlen) && rxlen) {
prx += rxlen;
if (prx-rx < sizeof(UsbCommand)) {
- // Keep reading until we have a completed response.
continue;
}
-
- // We have a completed response.
- memcpy(command, rx, sizeof(UsbCommand));
- return true;
- }
-
- if (prx == rx) {
- // We got no complete command while waiting, give up control
- return false;
- }
- }
-
- // did not get a complete command before being cancelled.
- return false;
-}
-
-// Worker thread for processing incoming events from the PM3
-void *uart_receiver(void *targ) {
- receiver_arg *conn = (receiver_arg*)targ;
- UsbCommand rx;
-
- while (conn->run) {
- #ifdef COMMS_DEBUG
- printf("uart_receiver: get lock\n");
- #endif
- // Lock up receives, in case they try to take it away from us.
- pthread_mutex_lock(&conn->recv_lock);
- #ifdef COMMS_DEBUG
- printf("uart_receiver: lock acquired\n");
- #endif
-
- if (port == NULL) {
- #ifdef COMMS_DEBUG
- printf("uart_receiver: port disappeared\n");
- #endif
- // Our port disappeared, stall. This code path matters for the flasher,
- // where it is fiddling with the serial port under us.
- pthread_mutex_unlock(&conn->recv_lock);
- msleep(10);
- continue;
+ UsbCommandReceived((UsbCommand*)rx);
}
+ prx = rx;
- bool got_command = ReceiveCommand(conn, &rx);
- #ifdef COMMS_DEBUG
- printf("uart_receiver: got command\n");
- #endif
- pthread_mutex_unlock(&conn->recv_lock);
-
- if (got_command) {
- UsbCommandReceived(&rx);
- }
-
- // We aren't normally trying to transmit in the flasher when the port would
- // be reset, so we can just keep going at this point.
- if (txcmd_pending) {
- if (!uart_send(port, (byte_t*) &txcmd, sizeof(UsbCommand))) {
+ if(txcmd_pending) {
+ if (!uart_send(sp, (uint8_t*) &txcmd, sizeof(UsbCommand))) {
PrintAndLog("Sending bytes to proxmark failed");
}
txcmd_pending = false;
return NULL;
}
+
/**
* Waits for a certain response type. This method waits for a maximum of
* ms_timeout milliseconds for a specified response command.
*@brief WaitForResponseTimeout
- * @param cmd command to wait for, or CMD_ANY to take any command.
+ * @param cmd command to wait for, or CMD_UNKNOWN to take any command.
* @param response struct to copy received command into.
* @param ms_timeout
* @param show_warning
* @return true if command was returned, otherwise false
*/
-bool WaitForResponseTimeoutW(uint64_t cmd, UsbCommand* response, size_t ms_timeout, bool show_warning) {
+bool WaitForResponseTimeoutW(uint32_t cmd, UsbCommand* response, size_t ms_timeout, bool show_warning) {
+
UsbCommand resp;
#ifdef COMMS_DEBUG
printf("Waiting for %04x cmd\n", cmd);
#endif
-
+
if (response == NULL) {
response = &resp;
}
uint64_t start_time = msclock();
// Wait until the command is received
- for (;;) {
+ while (true) {
while(getCommand(response)) {
- if (cmd == CMD_ANY || response->cmd == cmd) {
+ if (cmd == CMD_UNKNOWN || response->cmd == cmd) {
return true;
}
}
-
+
if (msclock() - start_time > ms_timeout) {
- // We timed out.
break;
}
-
+
if (msclock() - start_time > 2000 && show_warning) {
// 2 seconds elapsed (but this doesn't mean the timeout was exceeded)
PrintAndLog("Waiting for a response from the proxmark...");
- PrintAndLog("Don't forget to cancel its operation first by pressing on the button");
- break;
+ PrintAndLog("You can cancel this operation by pressing the pm3 button");
+ show_warning = false;
}
}
return false;
}
-bool WaitForResponseTimeout(uint64_t cmd, UsbCommand* response, size_t ms_timeout) {
+
+bool WaitForResponseTimeout(uint32_t cmd, UsbCommand* response, size_t ms_timeout) {
return WaitForResponseTimeoutW(cmd, response, ms_timeout, true);
}
-bool WaitForResponse(uint64_t cmd, UsbCommand* response) {
- return WaitForResponseTimeout(cmd, response, -1);
+bool WaitForResponse(uint32_t cmd, UsbCommand* response) {
+ return WaitForResponseTimeoutW(cmd, response, -1, true);
}
+
projects / proxmark3-svn / blobdiff