-NOTICE:
-(2014-03-26)
-This is now the official Proxmark repository!
-
-INTRODUCTION:
-
-The proxmark3 is a powerful general purpose RFID tool, the size of a deck
-of cards, designed to snoop, listen and emulate everything from
-Low Frequency (125kHz) to High Frequency (13.56MHz) tags.
-
-This repository contains enough software, logic (for the FPGA), and design
-documentation for the hardware that you could, at least in theory,
-do something useful with a proxmark3.
-
-RESOURCES:
-
- * This repository!
- https://github.com/Proxmark/proxmark3
-
- * The Wiki
- https://github.com/Proxmark/proxmark3/wiki
-
- * The GitHub page
- http://proxmark.github.io/proxmark3/
-
- * The Forum
- http://www.proxmark.org/forum
-
- * The IRC chanel
- irc.freenode.org #proxmark3
- -or-
- http://webchat.freenode.net/?channels=#proxmark3
-
-DEVELOPMENT:
-
-The tools required to build or run the project will vary depending on
-your operating system. Please refer to the Wiki for details.
-
- * https://github.com/Proxmark/proxmark3/wiki
-
-OBTAINING HARDWARE:
-
-The Proxmark 3 is available for purcahse (assembled and tested) from the
-following locations:
-
- * http://proxmark3.com/
- * http://www.xfpga.com/
-
-Most of the ultra-low-volume contract assemblers could put
-something like this together with a reasonable yield. A run of around
-a dozen units is probably cost-effective. The BOM includes (possibly-
-outdated) component pricing, and everything is available from Digikey
-and the usual distributors.
+The iceman fork.
-If you've never assembled a modern circuit board by hand, then this is
-not a good place to start. Some of the components (e.g. the crystals)
-must not be assembled with a soldering iron, and require hot air.
+NOTICE:
-The schematics are included; the component values given are not
-necessarily correct for all situations, but it should be possible to do
-nearly anything you would want with appropriate population options.
+The official Proxmark repository is found here: https://github.com/Proxmark/proxmark3
-The printed circuit board artwork is also available, as Gerbers and an
-Excellon drill file.
+NEWS:
-LICENSING:
+Whats in this fork? I have scraped the web for different enhancements to the PM3 source code and not all of them ever found their way to the master branch.
+Among the stuff is
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ * Jonor's hf 14a raw timing patch
+ * Piwi's updates. (usually gets into the master)
+ * Holiman's iclass, (usually gets into the master)
+ * Marshmellow's LF fixes
+ * Midnitesnake's Ultralight, Ultralight-c enhancements
+ * Izsh's lf peak modification / iir-filtering
+ * Aspers's tips and tricks from inside the PM3-gui-tool, settings.xml and other stuff.
+ * My own desfire, Ultralight extras, LF T55xx enhancements, bugs fixes (filelength, hf mf commands ), TNP3xxx lua scripts, Awid26, skidata scripts (will come)
+ * other obscure patches like for the sammy-mode, (offline you know), tagidentifications, defaultkeys.
+
+Give me a hint, and I'll see if I can't merge in the stuff you have.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+I don't actually know how to make small pull-request to github :( and that is the number one reason for me not pushing a lot of things back to the PM3 master.
+
+PM3 GUI:
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+I do tend to rename and move stuff around, the official PM3-GUI from Gaucho will not work so well. *sorry*
+
+DEVELOPMENT:
-Jonathan Westhues
-user jwesthues, at host cq.cx
+This fork is adjusted to compile on windows/mingw environment with Qt5.3.1 & GCC 4.8
+For people with linux you will need to patch some source code and some small change to one makefile. If you are lazy, you google the forum and find asper's or holimans makefile or you find your solution below.
+
+GC made updates to allow this to build easily on Ubuntu 14.04.2 LTS.
+ - See https://github.com/Proxmark/proxmark3/wiki/Ubuntu%20Linux
+ - Generally speaking, if you're running a "later" Proxmark, installation is very easy.
+ - Run "sudo apt-get install p7zip git build-essential libreadline5 libreadline-dev libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config wget"a
+ - Follow these instructions
+Get devkitARM release 41 from SourceForge (choose either the 64/32 ¿bit depending on your architecture, it is assumed you know how to check and recognize your architecture):
+
+(64-bit) http://sourceforge.net/projects/devkitpro/files/devkitARM/previous/devkitARM_r41-x86_64-linux.tar.bz2/download
+(32-bit) http://sourceforge.net/projects/devkitpro/files/devkitARM/previous/devkitARM_r41-i686-linux.tar.bz2/download
+Extract the contents of the .tar.bz2:
+ tar jxvf devkitARM_r41-<arch>-linux.tar.bz2
+Create a directory for the arm dev kit:
+ sudo mkdir -p /opt/devkitpro/
+Move the ARM developer kit to the newly created directory:
+ sudo mv devkitARM /opt/devkitpro/
+Add the appropriate environment variable:
+ export PATH=${PATH}:/opt/devkitpro/devkitARM/bin/
+Add the environment variable to your profile:
+ echo 'PATH=${PATH}:/opt/devkitpro/devkitARM/bin/ ' >> ~/.bashrc
+ - Use the magic build command "make UBUNTU_1404_QT4=1"
+
+Common errors linux/macOS finds
+
+Error:
+ * \client\makefile the parameter -lgdi32
+Solution:
+ * Remove parameter.
+
+Error:
+ * Using older Qt4.6 gives compilation errors.
+Solution
+ * Upgrade to Qt5.3.1
+ OR
+ * Change these two line in \client\makefile
+ CXXFLAGS = -I$(QTDIR)/include -I$(QTDIR)/include/QtCore -I$(QTDIR)/include/QtGui -I$(QTDIR)/include/QtWidgets -I/mingw/include
+ QTLDLIBS = -L$(QTDIR)/lib -lQt5Core -lQt5Gui -lQt5Widgets
+
+ TO
+
+ CXXFLAGS = -I$(QTDIR)/include -I$(QTDIR)/include/QtCore -I$(QTDIR)/include/QtGui
+ QTLDLIBS = -L$(QTDIR)/lib -lQtCore4 -lQtGui4
+
+
+An old Qt4 version makefile is found here: http://www.icesql.se/proxmark3/code/linuxmakefile.txt but this one doesn't have all new files in it. So I don't recommend it.
+
+The Proxmark 3 is available for purchase (assembled and tested) from the
+following locations:
-May 2007, Cambridge MA
+January 2015, Sweden
+iceman at host iuse.se
projects / proxmark3-svn / blobdiff