fix .gitignore changes

[proxmark3-svn] / client / fpga_compress.c

diff --git a/client/fpga_compress.c b/client/fpga_compress.c
index 0c40f22f15a1e7cff37259a2eaa2fff18963d929..28154243825350d527f569ac4390c57933ca530a 100644 (file)
--- a/client/fpga_compress.c
+++ b/client/fpga_compress.c
@@ -19,25 +19,26 @@
 #define MAX(a,b) ((a)>(b)?(a):(b))
 
 // zlib configuration
 #define MAX(a,b) ((a)>(b)?(a):(b))
 
 // zlib configuration

-#define COMPRESS_LEVEL                 9               // use best possible compression
-#define COMPRESS_WINDOW_BITS   15              // default = max = 15 for a window of 2^15 = 32KBytes
-#define COMPRESS_MEM_LEVEL             9               // determines the amount of memory allocated during compression. Default = 8.
+#define COMPRESS_LEVEL           9  // use best possible compression
+#define COMPRESS_WINDOW_BITS    15  // default = max = 15 for a window of 2^15 = 32KBytes
+#define COMPRESS_MEM_LEVEL       9  // determines the amount of memory allocated during compression. Default = 8.

 /* COMPRESS_STRATEGY can be 
        Z_DEFAULT_STRATEGY (the default), 
        Z_FILTERED (more huffmann, less string matching),
        Z_HUFFMAN_ONLY (huffman only, no string matching)
        Z_RLE (distances limited to one)
        Z_FIXED (prevents the use of dynamic Huffman codes)
 /* COMPRESS_STRATEGY can be 
        Z_DEFAULT_STRATEGY (the default), 
        Z_FILTERED (more huffmann, less string matching),
        Z_HUFFMAN_ONLY (huffman only, no string matching)
        Z_RLE (distances limited to one)
        Z_FIXED (prevents the use of dynamic Huffman codes)

-*/     
-#define        COMPRESS_STRATEGY               Z_DEFAULT_STRATEGY
+*/
+
+#define        COMPRESS_STRATEGY       Z_DEFAULT_STRATEGY

 // zlib tuning parameters:
 // zlib tuning parameters:

-#define COMPRESS_GOOD_LENGTH           258
-#define        COMPRESS_MAX_LAZY                       258     
-#define        COMPRESS_MAX_NICE_LENGTH        258
-#define        COMPRESS_MAX_CHAIN                      8192
+#define COMPRESS_GOOD_LENGTH           258
+#define COMPRESS_MAX_LAZY              258
+#define COMPRESS_MAX_NICE_LENGTH       258
+#define COMPRESS_MAX_CHAIN            8192

 
 

-#define FPGA_INTERLEAVE_SIZE   288     // (the FPGA's internal config frame size is 288 bits. Interleaving with 288 bytes should give best compression)
-#define FPGA_CONFIG_SIZE               42336   // our current fpga_[lh]f.bit files are 42175 bytes. Rounded up to next multiple of FPGA_INTERLEAVE_SIZE
+#define FPGA_INTERLEAVE_SIZE           288  // (the FPGA's internal config frame size is 288 bits. Interleaving with 288 bytes should give best compression)
+#define FPGA_CONFIG_SIZE             42336  // our current fpga_[lh]f.bit files are 42175 bytes. Rounded up to next multiple of FPGA_INTERLEAVE_SIZE

 
 static void usage(void)
 {
 
 static void usage(void)
 {


@@ -76,8 +77,8 @@ int zlib_compress(FILE *infile[], uint8_t num_infiles, FILE *outfile)
 {
        uint8_t *fpga_config;
        uint32_t i;
 {
        uint8_t *fpga_config;
        uint32_t i;

-       int ret;
-       uint8_t c;              
+       int32_t ret;
+       uint8_t c;

        z_stream compressed_fpga_stream;
 
        fpga_config = malloc(num_infiles * FPGA_CONFIG_SIZE);
        z_stream compressed_fpga_stream;
 
        fpga_config = malloc(num_infiles * FPGA_CONFIG_SIZE);


@@ -87,7 +88,7 @@ int zlib_compress(FILE *infile[], uint8_t num_infiles, FILE *outfile)
        do {
 
                if (i >= num_infiles * FPGA_CONFIG_SIZE) {
        do {
 
                if (i >= num_infiles * FPGA_CONFIG_SIZE) {

-                       fprintf(stderr, "Input files too big (total > %lu bytes). These are probably not PM3 FPGA config files.\n", num_infiles*FPGA_CONFIG_SIZE);
+                       fprintf(stderr, "Input files too big (total > %u bytes). These are probably not PM3 FPGA config files.\n", num_infiles*FPGA_CONFIG_SIZE);

                        for(uint16_t j = 0; j < num_infiles; j++) {
                                fclose(infile[j]);
                        }
                        for(uint16_t j = 0; j < num_infiles; j++) {
                                fclose(infile[j]);
                        }


@@ -122,11 +123,11 @@ int zlib_compress(FILE *infile[], uint8_t num_infiles, FILE *outfile)
                                                COMPRESS_STRATEGY);
 
        // estimate the size of the compressed output
                                                COMPRESS_STRATEGY);
 
        // estimate the size of the compressed output

-       unsigned int outsize_max = deflateBound(&compressed_fpga_stream, compressed_fpga_stream.avail_in);
+       uint32_t outsize_max = deflateBound(&compressed_fpga_stream, compressed_fpga_stream.avail_in);

        uint8_t *outbuf = malloc(outsize_max);
        compressed_fpga_stream.next_out = outbuf;
        compressed_fpga_stream.avail_out = outsize_max;
        uint8_t *outbuf = malloc(outsize_max);
        compressed_fpga_stream.next_out = outbuf;
        compressed_fpga_stream.avail_out = outsize_max;

-                                       
+        

        if (ret == Z_OK) {
                ret = deflateTune(&compressed_fpga_stream,
                                                        COMPRESS_GOOD_LENGTH,
        if (ret == Z_OK) {
                ret = deflateTune(&compressed_fpga_stream,
                                                        COMPRESS_GOOD_LENGTH,


@@ -139,10 +140,10 @@ int zlib_compress(FILE *infile[], uint8_t num_infiles, FILE *outfile)
                ret = deflate(&compressed_fpga_stream, Z_FINISH);
        }
        
                ret = deflate(&compressed_fpga_stream, Z_FINISH);
        }
        

-       fprintf(stderr, "compressed %lu input bytes to %lu output bytes\n", i, compressed_fpga_stream.total_out);
+       fprintf(stderr, "compressed %u input bytes to %lu output bytes\n", i, compressed_fpga_stream.total_out);

 
        if (ret != Z_STREAM_END) {
 
        if (ret != Z_STREAM_END) {

-               fprintf(stderr, "Error in deflate(): %d %s\n", ret, compressed_fpga_stream.msg);
+               fprintf(stderr, "Error in deflate(): %i %s\n", ret, compressed_fpga_stream.msg);

                free(outbuf);
                deflateEnd(&compressed_fpga_stream);
                for(uint16_t j = 0; j < num_infiles; j++) {
                free(outbuf);
                deflateEnd(&compressed_fpga_stream);
                for(uint16_t j = 0; j < num_infiles; j++) {


@@ -177,7 +178,7 @@ int zlib_decompress(FILE *infile, FILE *outfile)
        #define DECOMPRESS_BUF_SIZE 1024
        uint8_t outbuf[DECOMPRESS_BUF_SIZE];
        uint8_t inbuf[DECOMPRESS_BUF_SIZE];
        #define DECOMPRESS_BUF_SIZE 1024
        uint8_t outbuf[DECOMPRESS_BUF_SIZE];
        uint8_t inbuf[DECOMPRESS_BUF_SIZE];

-       int ret;
+       int32_t ret;

        
        z_stream compressed_fpga_stream;
 
        
        z_stream compressed_fpga_stream;
 


@@ -197,7 +198,7 @@ int zlib_decompress(FILE *infile, FILE *outfile)
                        compressed_fpga_stream.next_in = inbuf;
                        uint16_t i = 0;
                        do {
                        compressed_fpga_stream.next_in = inbuf;
                        uint16_t i = 0;
                        do {

-                               int c = fgetc(infile);
+                               int32_t c = fgetc(infile);

                                if (!feof(infile)) {
                                        inbuf[i++] = c & 0xFF;
                                        compressed_fpga_stream.avail_in++;
                                if (!feof(infile)) {
                                        inbuf[i++] = c & 0xFF;
                                        compressed_fpga_stream.avail_in++;


@@ -232,7 +233,7 @@ int zlib_decompress(FILE *infile, FILE *outfile)
                fclose(infile);
                return(EXIT_SUCCESS);
        } else {
                fclose(infile);
                return(EXIT_SUCCESS);
        } else {

-               fprintf(stderr, "Error. Inflate() returned error %d, %s", ret, compressed_fpga_stream.msg);
+               fprintf(stderr, "Error. Inflate() returned error %i, %s", ret, compressed_fpga_stream.msg);

                fclose(outfile);
                fclose(infile);
                return(EXIT_FAILURE);
                fclose(outfile);
                fclose(infile);
                return(EXIT_FAILURE);


@@ -251,7 +252,7 @@ int main(int argc, char **argv)
                return(EXIT_FAILURE);
        }
        
                return(EXIT_FAILURE);
        }
        

-       if (!strcmp(argv[1], "-d")) {                   // Decompress
+       if (!strcmp(argv[1], "-d")) { // Decompress

                infiles = calloc(1, sizeof(FILE*));
                if (argc != 4) {
                        usage();
                infiles = calloc(1, sizeof(FILE*));
                if (argc != 4) {
                        usage();


@@ -269,7 +270,7 @@ int main(int argc, char **argv)
                }
                return zlib_decompress(infiles[0], outfile);
 
                }
                return zlib_decompress(infiles[0], outfile);
 

-       } else {                                                                // Compress
+       } else { // Compress

 
                infiles = calloc(argc-2, sizeof(FILE*));
                for (uint16_t i = 0; i < argc-2; i++) { 
 
                infiles = calloc(argc-2, sizeof(FILE*));
                for (uint16_t i = 0; i < argc-2; i++) {