ADD: @go_tus 's code to generate wiegand codes from FacilityCode/SiteCode and Cardn...

[proxmark3-svn] / armsrc / lfsampling.c

diff --git a/armsrc/lfsampling.c b/armsrc/lfsampling.c
index 7af065ea141bb2f889c20de389000f93a8716094..7d55fa3cfae938b11edf054422ff461cd6f74869 100644 (file)
--- a/armsrc/lfsampling.c
+++ b/armsrc/lfsampling.c
@@ -12,12 +12,12 @@
 #include "string.h"
 
 #include "lfsampling.h"
-#include "cipherutils.h"
+
 sample_config config = { 1, 8, 1, 95, 0 } ;
 
 void printConfig()
 {
-       Dbprintf("Sampling config: ");
+       Dbprintf("LF Sampling config: ");
        Dbprintf("  [q] divisor:           %d ", config.divisor);
        Dbprintf("  [b] bps:               %d ", config.bits_per_sample);
        Dbprintf("  [d] decimation:        %d ", config.decimation);
@@ -55,20 +55,19 @@ sample_config* getSamplingConfig()
 {
        return &config;
 }
-/*
+
 typedef struct {
        uint8_t * buffer;
        uint32_t numbits;
        uint32_t position;
 } BitstreamOut;
 
-*/
 /**
  * @brief Pushes bit onto the stream
  * @param stream
  * @param bit
  */
-/*void pushBit( BitstreamOut* stream, uint8_t bit)
+void pushBit( BitstreamOut* stream, uint8_t bit)
 {
        int bytepos = stream->position >> 3; // divide by 8
        int bitpos = stream->position & 7;
@@ -76,7 +75,7 @@ typedef struct {
        stream->position++;
        stream->numbits++;
 }
-*/
+
 /**
 * Setup the FPGA to listen for samples. This method downloads the FPGA bitstream
 * if not already loaded, sets divisor and starts up the antenna.
@@ -120,14 +119,13 @@ void LFSetupFPGAForADC(int divisor, bool lf_field)
  * @param silent - is true, now outputs are made. If false, dbprints the status
  * @return the number of bits occupied by the samples.
  */
-
 uint32_t DoAcquisition(uint8_t decimation, uint32_t bits_per_sample, bool averaging, int trigger_threshold,bool silent)
 {
-       //.
+       //bigbuf, to hold the aquired raw data signal
        uint8_t *dest = BigBuf_get_addr();
-    int bufsize = BigBuf_max_traceLen();
+    uint16_t bufsize = BigBuf_max_traceLen();
 
-       memset(dest, 0, bufsize);
+       BigBuf_Clear_ext(false);
 
        if(bits_per_sample < 1) bits_per_sample = 1;
        if(bits_per_sample > 8) bits_per_sample = 8;
@@ -143,7 +141,7 @@ uint32_t DoAcquisition(uint8_t decimation, uint32_t bits_per_sample, bool averag
        uint32_t sample_total_numbers =0 ;
        uint32_t sample_total_saved =0 ;
 
-       while(!BUTTON_PRESS()) {
+       while(!BUTTON_PRESS() && !usb_poll_validate_length() ) {
                WDT_HIT();
                if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
                        AT91C_BASE_SSC->SSC_THR = 0x43;
@@ -152,7 +150,8 @@ uint32_t DoAcquisition(uint8_t decimation, uint32_t bits_per_sample, bool averag
                if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
                        sample = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
                        LED_D_OFF();
-                       if (trigger_threshold > 0 && sample < trigger_threshold)
+                       // threshold either high or low values 128 = center 0.  if trigger = 178 
+                       if ((trigger_threshold > 0) && (sample < (trigger_threshold+128)) && (sample > (128-trigger_threshold))) // 
                                continue;
 
                        trigger_threshold = 0;
@@ -225,28 +224,94 @@ uint32_t DoAcquisition_config( bool silent)
                                  ,silent);
 }
 
-uint32_t ReadLF(bool activeField)
+uint32_t ReadLF(bool activeField, bool silent)
 {
-       printConfig();
+       if (!silent) printConfig();
        LFSetupFPGAForADC(config.divisor, activeField);
        // Now call the acquisition routine
-       return DoAcquisition_config(false);
+       return DoAcquisition_config(silent);
 }
 
 /**
 * Initializes the FPGA for reader-mode (field on), and acquires the samples.
 * @return number of bits sampled
 **/
-uint32_t SampleLF()
+uint32_t SampleLF(bool printCfg)
 {
-       return ReadLF(true);
+       return ReadLF(true, printCfg);
 }
 /**
 * Initializes the FPGA for snoop-mode (field off), and acquires the samples.
 * @return number of bits sampled
 **/
+uint32_t SnoopLF() {
+       return ReadLF(false, true);
+}
 
-uint32_t SnoopLF()
-{
-       return ReadLF(false);
+/**
+* acquisition of T55x7 LF signal. Similart to other LF, but adjusted with @marshmellows thresholds
+* the data is collected in BigBuf.
+**/
+void doT55x7Acquisition(size_t sample_size) {
+
+       #define T55xx_READ_UPPER_THRESHOLD 128+60  // 60 grph
+       #define T55xx_READ_LOWER_THRESHOLD 128-60  // -60 grph
+       #define T55xx_READ_TOL   5
+
+       uint8_t *dest = BigBuf_get_addr();
+       uint16_t bufsize = BigBuf_max_traceLen();
+       
+       if ( bufsize > sample_size )
+               bufsize = sample_size;
+
+       uint16_t i = 0;
+       bool startFound = false;
+       bool highFound = false;
+       bool lowFound = false;
+       uint8_t curSample = 0;
+       uint8_t lastSample = 0;
+       uint16_t skipCnt = 0;
+       while(!BUTTON_PRESS() && !usb_poll_validate_length() && skipCnt < 1000 && (i < bufsize) ) {
+               WDT_HIT();              
+               if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
+                       AT91C_BASE_SSC->SSC_THR = 0x43;
+                       LED_D_ON();
+               }
+               if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
+                       curSample = (uint8_t)AT91C_BASE_SSC->SSC_RHR;   
+                       LED_D_OFF();
+               
+                       // skip until the first high sample above threshold
+                       if (!startFound && curSample > T55xx_READ_UPPER_THRESHOLD) {
+                               //if (curSample > lastSample) 
+                               //      lastSample = curSample;
+                               highFound = true;
+                       } else if (!highFound) {
+                               skipCnt++;
+                               continue;
+                       }
+                       // skip until the first Low sample below threshold
+                       if (!startFound && curSample < T55xx_READ_LOWER_THRESHOLD) {
+                               //if (curSample > lastSample) 
+                               lastSample = curSample;
+                               lowFound = true;
+                       } else if (!lowFound) {
+                               skipCnt++;
+                               continue;
+                       }
+
+
+                       // skip until first high samples begin to change
+                       if (startFound || curSample > T55xx_READ_LOWER_THRESHOLD+T55xx_READ_TOL){
+                               // if just found start - recover last sample
+                               if (!startFound) {
+                                       dest[i++] = lastSample;
+                                       startFound = true;
+                               }
+                               // collect samples
+                               dest[i++] = curSample;
+                       }
+               }
+       }
 }
+                       
\ No newline at end of file