#include "cmdhf14b.h"
#include "cmdmain.h"
#include "cmdhf14a.h"
-#include "sleep.h"
static int CmdHelp(const char *Cmd);
-int CmdHF14BDemod(const char *Cmd)
-{
- int i, j, iold;
- int isum, qsum;
- int outOfWeakAt;
- bool negateI, negateQ;
-
- uint8_t data[256];
- int dataLen = 0;
-
- // As received, the samples are pairs, correlations against I and Q
- // square waves. So estimate angle of initial carrier (or just
- // quadrant, actually), and then do the demod.
-
- // First, estimate where the tag starts modulating.
- for (i = 0; i < GraphTraceLen; i += 2) {
- if (abs(GraphBuffer[i]) + abs(GraphBuffer[i + 1]) > 40) {
- break;
- }
- }
- if (i >= GraphTraceLen) {
- PrintAndLog("too weak to sync");
- return 0;
- }
- PrintAndLog("out of weak at %d", i);
- outOfWeakAt = i;
-
- // Now, estimate the phase in the initial modulation of the tag
- isum = 0;
- qsum = 0;
- for (; i < (outOfWeakAt + 16); i += 2) {
- isum += GraphBuffer[i + 0];
- qsum += GraphBuffer[i + 1];
- }
- negateI = (isum < 0);
- negateQ = (qsum < 0);
-
- // Turn the correlation pairs into soft decisions on the bit.
- j = 0;
- for (i = 0; i < GraphTraceLen / 2; i++) {
- int si = GraphBuffer[j];
- int sq = GraphBuffer[j + 1];
- if (negateI) si = -si;
- if (negateQ) sq = -sq;
- GraphBuffer[i] = si + sq;
- j += 2;
- }
- GraphTraceLen = i;
-
- i = outOfWeakAt / 2;
- while (GraphBuffer[i] > 0 && i < GraphTraceLen)
- i++;
- if (i >= GraphTraceLen) goto demodError;
-
- iold = i;
- while (GraphBuffer[i] < 0 && i < GraphTraceLen)
- i++;
- if (i >= GraphTraceLen) goto demodError;
- if ((i - iold) > 23) goto demodError;
-
- PrintAndLog("make it to demod loop");
-
- for (;;) {
- iold = i;
- while (GraphBuffer[i] >= 0 && i < GraphTraceLen)
- i++;
- if (i >= GraphTraceLen) goto demodError;
- if ((i - iold) > 6) goto demodError;
-
- uint16_t shiftReg = 0;
- if (i + 20 >= GraphTraceLen) goto demodError;
-
- for (j = 0; j < 10; j++) {
- int soft = GraphBuffer[i] + GraphBuffer[i + 1];
-
- if (abs(soft) < (abs(isum) + abs(qsum)) / 20) {
- PrintAndLog("weak bit");
- }
-
- shiftReg >>= 1;
- if(GraphBuffer[i] + GraphBuffer[i+1] >= 0) {
- shiftReg |= 0x200;
- }
-
- i+= 2;
- }
-
- if ((shiftReg & 0x200) && !(shiftReg & 0x001))
- {
- // valid data byte, start and stop bits okay
- PrintAndLog(" %02x", (shiftReg >> 1) & 0xff);
- data[dataLen++] = (shiftReg >> 1) & 0xff;
- if (dataLen >= sizeof(data)) {
- return 0;
- }
- } else if (shiftReg == 0x000) {
- // this is EOF
- break;
- } else {
- goto demodError;
- }
- }
-
- uint8_t first, second;
- ComputeCrc14443(CRC_14443_B, data, dataLen-2, &first, &second);
- PrintAndLog("CRC: %02x %02x (%s)\n", first, second,
- (first == data[dataLen-2] && second == data[dataLen-1]) ?
- "ok" : "****FAIL****");
-
- RepaintGraphWindow();
- return 0;
-
-demodError:
- PrintAndLog("demod error");
- RepaintGraphWindow();
- return 0;
-}
-
int CmdHF14BList(const char *Cmd)
{
PrintAndLog("Deprecated command, use 'hf list 14b' instead");
return 0;
}
-int CmdHF14Sim(const char *Cmd)
-{
- UsbCommand c={CMD_SIMULATE_TAG_ISO_14443};
- SendCommand(&c);
- return 0;
-}
-
-int CmdHFSimlisten(const char *Cmd)
+int CmdHF14BSim(const char *Cmd)
{
- UsbCommand c = {CMD_SIMULATE_TAG_HF_LISTEN};
- SendCommand(&c);
- return 0;
+ UsbCommand c={CMD_SIMULATE_TAG_ISO_14443B};
+ SendCommand(&c);
+ return 0;
}
int CmdHF14BSnoop(const char *Cmd)
{
- UsbCommand c = {CMD_SNOOP_ISO_14443};
- SendCommand(&c);
- return 0;
+ UsbCommand c = {CMD_SNOOP_ISO_14443B};
+ SendCommand(&c);
+ return 0;
}
/* New command to read the contents of a SRI512 tag
*/
int CmdSri512Read(const char *Cmd)
{
- UsbCommand c = {CMD_READ_SRI512_TAG, {strtol(Cmd, NULL, 0), 0, 0}};
- SendCommand(&c);
- return 0;
+ UsbCommand c = {CMD_READ_SRI512_TAG, {strtol(Cmd, NULL, 0), 0, 0}};
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
}
/* New command to read the contents of a SRIX4K tag
*/
int CmdSrix4kRead(const char *Cmd)
{
- UsbCommand c = {CMD_READ_SRIX4K_TAG, {strtol(Cmd, NULL, 0), 0, 0}};
- SendCommand(&c);
- return 0;
+ UsbCommand c = {CMD_READ_SRIX4K_TAG, {strtol(Cmd, NULL, 0), 0, 0}};
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
}
int rawClose(void){
- UsbCommand resp;
+ UsbCommand resp;
UsbCommand c = {CMD_ISO_14443B_COMMAND, {0, 0, 0}};
+ clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
return 0;
return 0;
}
-int HF14BCmdRaw(bool reply, bool *crc, uint8_t power_trace, uint8_t *data, uint8_t *datalen, bool verbose){
+int HF14BCmdRaw(bool reply, bool *crc, bool power, uint8_t *data, uint8_t *datalen, bool verbose){
UsbCommand resp;
UsbCommand c = {CMD_ISO_14443B_COMMAND, {0, 0, 0}}; // len,recv,power
- if(*crc)
- {
- uint8_t first, second;
- ComputeCrc14443(CRC_14443_B, data, *datalen, &first, &second);
- data[*datalen] = first;
- data[*datalen + 1] = second;
- *datalen += 2;
- }
-
- c.arg[0] = *datalen;
- c.arg[1] = reply;
- c.arg[2] = power_trace;
- memcpy(c.d.asBytes,data,*datalen);
- SendCommand(&c);
-
- if (!reply) return 1;
-
- if (!WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
- if (verbose) PrintAndLog("timeout while waiting for reply.");
- return 0;
- }
- *datalen = resp.arg[0];
- if (verbose) PrintAndLog("received %u octets", *datalen);
- if(!*datalen)
- return 0;
-
- memcpy(data, resp.d.asBytes, *datalen);
- if (verbose) PrintAndLog("%s", sprint_hex(data, *datalen));
-
- uint8_t first, second;
- ComputeCrc14443(CRC_14443_B, data, *datalen-2, &first, &second);
- if(data[*datalen-2] == first && data[*datalen-1] == second) {
- if (verbose) PrintAndLog("CRC OK");
- *crc = true;
- } else {
- if (verbose) PrintAndLog("CRC failed");
- *crc = false;
- }
- return 1;
+ if(*crc)
+ {
+ uint8_t first, second;
+ ComputeCrc14443(CRC_14443_B, data, *datalen, &first, &second);
+ data[*datalen] = first;
+ data[*datalen + 1] = second;
+ *datalen += 2;
+ }
+
+ c.arg[0] = *datalen;
+ c.arg[1] = reply;
+ c.arg[2] = power;
+ memcpy(c.d.asBytes,data,*datalen);
+ clearCommandBuffer();
+ SendCommand(&c);
+
+ if (!reply) return 1;
+
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
+ if (verbose) PrintAndLog("timeout while waiting for reply.");
+ return 0;
+ }
+ *datalen = resp.arg[0];
+ if (verbose) PrintAndLog("received %u octets", *datalen);
+ if(*datalen<2) return 0;
+
+ memcpy(data, resp.d.asBytes, *datalen);
+ if (verbose) PrintAndLog("%s", sprint_hex(data, *datalen));
+
+ uint8_t first, second;
+ ComputeCrc14443(CRC_14443_B, data, *datalen-2, &first, &second);
+ if(data[*datalen-2] == first && data[*datalen-1] == second) {
+ if (verbose) PrintAndLog("CRC OK");
+ *crc = true;
+ } else {
+ if (verbose) PrintAndLog("CRC failed");
+ *crc = false;
+ }
+ return 1;
}
int CmdHF14BCmdRaw (const char *Cmd) {
bool reply = true;
bool crc = false;
- uint8_t power_trace = 0;
+ bool power = false;
char buf[5]="";
uint8_t data[100] = {0x00};
uint8_t datalen = 0;
break;
case 'p':
case 'P':
- power_trace |= 1;
+ power = true;
break;
default:
PrintAndLog("Invalid option");
return 0;
}
- return HF14BCmdRaw(reply, &crc, power_trace, data, &datalen, true);
+ return HF14BCmdRaw(reply, &crc, power, data, &datalen, true);
}
static void print_atqb_resp(uint8_t *data){
- PrintAndLog (" UID: %s", sprint_hex(data+1,4));
- PrintAndLog (" App Data: %s", sprint_hex(data+5,4));
- PrintAndLog (" Protocol: %s", sprint_hex(data+9,3));
- uint8_t BitRate = data[9];
- if (!BitRate)
- PrintAndLog (" Bit Rate: 106 kbit/s only PICC <-> PCD");
- if (BitRate & 0x10)
- PrintAndLog (" Bit Rate: 212 kbit/s PICC -> PCD supported");
- if (BitRate & 0x20)
- PrintAndLog (" Bit Rate: 424 kbit/s PICC -> PCD supported");
- if (BitRate & 0x40)
- PrintAndLog (" Bit Rate: 847 kbit/s PICC -> PCD supported");
- if (BitRate & 0x01)
- PrintAndLog (" Bit Rate: 212 kbit/s PICC <- PCD supported");
- if (BitRate & 0x02)
- PrintAndLog (" Bit Rate: 424 kbit/s PICC <- PCD supported");
- if (BitRate & 0x04)
- PrintAndLog (" Bit Rate: 847 kbit/s PICC <- PCD supported");
- if (BitRate & 0x80)
- PrintAndLog (" Same bit rate <-> required");
-
- uint16_t maxFrame = data[10]>>4;
- if (maxFrame < 5)
- maxFrame = 8*maxFrame + 16;
- else if (maxFrame == 5)
- maxFrame = 64;
- else if (maxFrame == 6)
- maxFrame = 96;
- else if (maxFrame == 7)
- maxFrame = 128;
- else if (maxFrame == 8)
- maxFrame = 256;
- else
- maxFrame = 257;
-
- PrintAndLog ("Max Frame Size: %d%s",maxFrame, (maxFrame == 257) ? "+ RFU" : "");
-
- uint8_t protocolT = data[10] & 0xF;
- PrintAndLog (" Protocol Type: Protocol is %scompliant with ISO/IEC 14443-4",(protocolT) ? "" : "not " );
- PrintAndLog ("Frame Wait Int: %d", data[11]>>4);
- PrintAndLog (" App Data Code: Application is %s",(data[11]&4) ? "Standard" : "Proprietary");
- PrintAndLog (" Frame Options: NAD is %ssupported",(data[11]&2) ? "" : "not ");
- PrintAndLog (" Frame Options: CID is %ssupported",(data[11]&1) ? "" : "not ");
-
- return;
+ PrintAndLog (" UID: %s", sprint_hex(data+1,4));
+ PrintAndLog (" App Data: %s", sprint_hex(data+5,4));
+ PrintAndLog (" Protocol: %s", sprint_hex(data+9,3));
+ uint8_t BitRate = data[9];
+ if (!BitRate) PrintAndLog (" Bit Rate: 106 kbit/s only PICC <-> PCD");
+ if (BitRate & 0x10) PrintAndLog (" Bit Rate: 212 kbit/s PICC -> PCD supported");
+ if (BitRate & 0x20) PrintAndLog (" Bit Rate: 424 kbit/s PICC -> PCD supported");
+ if (BitRate & 0x40) PrintAndLog (" Bit Rate: 847 kbit/s PICC -> PCD supported");
+ if (BitRate & 0x01) PrintAndLog (" Bit Rate: 212 kbit/s PICC <- PCD supported");
+ if (BitRate & 0x02) PrintAndLog (" Bit Rate: 424 kbit/s PICC <- PCD supported");
+ if (BitRate & 0x04) PrintAndLog (" Bit Rate: 847 kbit/s PICC <- PCD supported");
+ if (BitRate & 0x80) PrintAndLog (" Same bit rate <-> required");
+
+ uint16_t maxFrame = data[10]>>4;
+ if (maxFrame < 5) maxFrame = 8 * maxFrame + 16;
+ else if (maxFrame == 5) maxFrame = 64;
+ else if (maxFrame == 6) maxFrame = 96;
+ else if (maxFrame == 7) maxFrame = 128;
+ else if (maxFrame == 8) maxFrame = 256;
+ else maxFrame = 257;
+
+ PrintAndLog ("Max Frame Size: %d%s", maxFrame, (maxFrame == 257) ? "+ RFU" : "");
+
+ uint8_t protocolT = data[10] & 0xF;
+ PrintAndLog (" Protocol Type: Protocol is %scompliant with ISO/IEC 14443-4",(protocolT) ? "" : "not " );
+ PrintAndLog ("Frame Wait Int: %d", data[11]>>4);
+ PrintAndLog (" App Data Code: Application is %s",(data[11]&4) ? "Standard" : "Proprietary");
+ PrintAndLog (" Frame Options: NAD is %ssupported",(data[11]&2) ? "" : "not ");
+ PrintAndLog (" Frame Options: CID is %ssupported",(data[11]&1) ? "" : "not ");
+
+ return;
}
char *get_ST_Chip_Model(uint8_t data){
case 0xC: sprintf(retStr, "SRT512"); break;
default: sprintf(retStr, "Unknown"); break;
}
- return retStr;
-}
-
-static void print_st_info(uint8_t *data){
- //uid = first 8 bytes in data
- PrintAndLog(" UID: %s", sprint_hex(data,8));
- PrintAndLog(" MFG: %02X, %s", data[1], getTagInfo(data[1]));
- PrintAndLog("Chip: %02X, %s", data[2]>>2, get_ST_Chip_Model(data[2]>>2));
- return;
-}
-
-int HF14BStdRead(uint8_t *data, uint8_t *datalen){
- bool crc = true;
- *datalen = 3;
- //std read cmd
- data[0] = 0x05;
- data[1] = 0x00;
- data[2] = 0x08;
-
- int ans = HF14BCmdRaw(true, &crc, 2, data, datalen, false);
+
+ c.arg[0] = datalen;
+ c.arg[1] = reply;
+ c.arg[2] = power;
+ memcpy(c.d.asBytes,data,datalen);
+
+ SendCommand(&c);
+
+ if (reply) {
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
+ recv = resp.d.asBytes;
+ PrintAndLog("received %i octets",resp.arg[0]);
+ if(resp.arg[0] == 0)
+ return 0;
+ hexout = (char *)malloc(resp.arg[0] * 3 + 1);
+ if (hexout != NULL) {
+ uint8_t first, second;
+ for (int i = 0; i < resp.arg[0]; i++) { // data in hex
+ sprintf(&hexout[i * 3], "%02X ", recv[i]);
+ }
+ PrintAndLog("%s", hexout);
+ free(hexout);
+ if (resp.arg[0] > 2) {
+ ComputeCrc14443(CRC_14443_B, recv, resp.arg[0]-2, &first, &second);
+ if(recv[resp.arg[0]-2]==first && recv[resp.arg[0]-1]==second) {
+ PrintAndLog("CRC OK");
+ } else {
+ PrintAndLog("CRC failed");
+ }
+ }
+ } else {
+ PrintAndLog("malloc failed your client has low memory?");
+ }
- if (!ans) return 0;
- if (data[0] != 0x50 || *datalen < 14 || !crc) return 0;
+ crc = false;
+ *datalen = 1;
+ data[0] = 0x0a;
+
+ if (HF14BCmdRaw(true, &crc, false, data, datalen, false)!=0) {
+ if (*datalen > 0) {
+ PrintAndLog ("\n14443-3b tag found:");
+ PrintAndLog ("Unknown tag type answered to a 0x0A command ans:");
+ PrintAndLog ("%s",sprint_hex(data,*datalen));
+ return 1;
+ }
+ }
+
+ crc = false;
+ *datalen = 1;
+ data[0] = 0x0c;
+
+ if (HF14BCmdRaw(true, &crc, false, data, datalen, false)!=0) {
+ if (*datalen > 0) {
+ PrintAndLog ("\n14443-3b tag found:");
+ PrintAndLog ("Unknown tag type answered to a 0x0C command ans:");
+ PrintAndLog ("%s",sprint_hex(data,*datalen));
+ return 1;
+ }
+ }
- PrintAndLog ("\n14443-3b tag found:");
- print_atqb_resp(data);
+ return 0;
- return 1;
}
+int HF14BReader(bool verbose){
+ uint8_t data[100];
+ uint8_t datalen = 5;
+ // try std 14b (atqb)
+ if (HF14BStdReader(data, &datalen)) return 1;
-int HF14B_ST_Read(uint8_t *data, uint8_t *datalen){
- bool crc = true;
- *datalen = 2;
- //wake cmd
- data[0] = 0x06;
- data[1] = 0x00;
- //power on and reset tracing
- int ans = HF14BCmdRaw(true, &crc, 3, data, datalen, true);
-
- if (!ans) return rawClose();
- if (*datalen < 3 || !crc) return rawClose();
-
- uint8_t chipID = data[0];
- // select
- data[0] = 0x0E;
- data[1] = chipID;
- *datalen = 2;
- msleep(100);
- //power on
- ans = HF14BCmdRaw(true, &crc, 1, data, datalen, true);
-
- if (!ans) return rawClose();
- if (*datalen < 3 || !crc) return rawClose();
-
- // get uid
- data[0] = 0x0B;
- *datalen = 1;
- msleep(100);
- //power off
- ans = HF14BCmdRaw(true, &crc, 0, data, datalen, true);
-
- if (!ans) return 0;
- if (*datalen < 10 || !crc) return 0;
+ // try st 14b
+ if (HF14B_ST_Reader(data, &datalen)) return 1;
- PrintAndLog("\n14443-3b ST tag found:");
- print_st_info(data);
- return 1;
+ // try unknown 14b read commands (to be identified later)
+ // could be read of calypso, CEPAS, moneo, or pico pass.
+ if (HF14B_Other_Reader(data, &datalen)) return 1;
-}
-
-int HF14BReader(bool verbose){
- uint8_t data[100];
- uint8_t datalen = 5;
-
- // try std 14b (atqb)
- int ans = HF14BStdRead(data, &datalen);
- if (ans) return 1;
-
- // try st 14b
- ans = HF14B_ST_Read(data, &datalen);
- if (ans) return 1;
if (verbose) PrintAndLog("no 14443B tag found");
return 0;
-
}
-int CmdHF14BReader(const char *Cmd)
-{
+int CmdHF14BReader(const char *Cmd){
return HF14BReader(true);
- //UsbCommand c = {CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443, {strtol(Cmd, NULL, 0), 0, 0}};
- //SendCommand(&c);
}
int CmdHF14BWrite( const char *Cmd){
-
/*
* For SRIX4K blocks 00 - 7F
* hf 14b raw -c -p 09 $srix4kwblock $srix4kwdata
static command_t CommandTable[] =
{
- {"help", CmdHelp, 1, "This help"},
- {"demod", CmdHF14BDemod, 1, "Demodulate ISO14443 Type B from tag"},
- {"list", CmdHF14BList, 0, "[Deprecated] List ISO 14443b history"},
- {"reader", CmdHF14BReader, 0, "Find 14b tag (HF ISO 14443b)"},
- {"sim", CmdHF14Sim, 0, "Fake ISO 14443 tag"},
- {"simlisten", CmdHFSimlisten, 0, "Get HF samples as fake tag"},
- {"snoop", CmdHF14BSnoop, 0, "Eavesdrop ISO 14443"},
- {"sri512read", CmdSri512Read, 0, "Read contents of a SRI512 tag"},
- {"srix4kread", CmdSrix4kRead, 0, "Read contents of a SRIX4K tag"},
- {"raw", CmdHF14BCmdRaw, 0, "Send raw hex data to tag"},
- {"write", CmdHF14BWrite, 0, "Write data to a SRI512 | SRIX4K tag"},
- {NULL, NULL, 0, NULL}
+ {"help", CmdHelp, 1, "This help"},
+ {"list", CmdHF14BList, 0, "[Deprecated] List ISO 14443b history"},
+ {"sim", CmdHF14BSim, 0, "Fake ISO 14443B tag"},
+ {"snoop", CmdHF14BSnoop, 0, "Eavesdrop ISO 14443B"},
+ {"sri512read", CmdSri512Read, 0, "Read contents of a SRI512 tag"},
+ {"srix4kread", CmdSrix4kRead, 0, "Read contents of a SRIX4K tag"},
+ {"raw", CmdHF14BCmdRaw, 0, "Send raw hex data to tag"},
+ {"write", CmdHF14BWrite, 0, "Write data to a SRI512 | SRIX4K tag"},
+ {NULL, NULL, 0, NULL}
};
int CmdHF14B(const char *Cmd)
{
- CmdsParse(CommandTable, Cmd);
- return 0;
+ CmdsParse(CommandTable, Cmd);
+ return 0;
}
int CmdHelp(const char *Cmd)
{
- CmdsHelp(CommandTable);
- return 0;
+ CmdsHelp(CommandTable);
+ return 0;
}
projects / proxmark3-svn / blobdiff