]> git.zerfleddert.de Git - proxmark3-svn/blobdiff - common/lfdemod.c
fix lf file includes to include own .h
[proxmark3-svn] / common / lfdemod.c
index 721c9d1c3520f8ce3952d5b06f203279faeea0cf..8307a89088f57c5e468665c602dea7effcc0e984 100644 (file)
 // There are 4 main sections of code below:
 // Utilities Section: 
 //    for general utilities used by multiple other functions
-// Modulation Demods &/or Decoding Section:
-//    for main general modulation demodulating and encoding decoding code.
 // Clock / Bitrate Detection Section:
 //    for clock detection functions for each modulation
+// Modulation Demods &/or Decoding Section:
+//    for main general modulation demodulating and encoding decoding code.
 // Tag format detection section:
 //    for detection of specific tag formats within demodulated data
 //
 // marshmellow
 //-----------------------------------------------------------------------------
 
-#include <stdlib.h>
-#include "lfdemod.h"
-#include <string.h>
+#include <string.h>  // for memset, memcmp and size_t
+#include <stdint.h>  // for uint_32+
+#include <stdbool.h> // for bool
 
-//---------------------------------Utilities Section--------------------------------------------------
+//**********************************************************************************************
+//---------------------------------Utilities Section--------------------------------------------
+//**********************************************************************************************
+#define LOWEST_DEFAULT_CLOCK 32
+#define FSK_PSK_THRESHOLD   123
 
 //to allow debug print calls when used not on device
 void dummy(char *fmt, ...){}
@@ -51,11 +55,10 @@ void dummy(char *fmt, ...){}
 #endif
 
 uint8_t justNoise(uint8_t *BitStream, size_t size) {
-       static const uint8_t THRESHOLD = 123;
        //test samples are not just noise
        uint8_t justNoise1 = 1;
        for(size_t idx=0; idx < size && justNoise1 ;idx++){
-               justNoise1 = BitStream[idx] < THRESHOLD;
+               justNoise1 = BitStream[idx] < FSK_PSK_THRESHOLD;
        }
        return justNoise1;
 }
@@ -70,7 +73,7 @@ int getHiLo(uint8_t *BitStream, size_t size, int *high, int *low, uint8_t fuzzHi
                if (BitStream[i] > *high) *high = BitStream[i];
                if (BitStream[i] < *low) *low = BitStream[i];
        }
-       if (*high < 123) return -1; // just noise
+       if (*high < FSK_PSK_THRESHOLD) return -1; // just noise
        *high = ((*high-128)*fuzzHi + 12800)/100;
        *low = ((*low-128)*fuzzLo + 12800)/100;
        return 1;
@@ -195,18 +198,18 @@ uint8_t preambleSearch(uint8_t *BitStream, uint8_t *preamble, size_t pLen, size_
 }
 
 // find start of modulating data (for fsk and psk) in case of beginning noise or slow chip startup.
-size_t findModStart(uint8_t dest[], size_t size, uint8_t threshold_value, uint8_t expWaveSize) {
+size_t findModStart(uint8_t dest[], size_t size, uint8_t expWaveSize) {
        size_t i = 0;
        size_t waveSizeCnt = 0;
        uint8_t thresholdCnt = 0;
-       bool isAboveThreshold = dest[i++] >= threshold_value;
+       bool isAboveThreshold = dest[i++] >= FSK_PSK_THRESHOLD;
        for (; i < size-20; i++ ) {
-               if(dest[i] < threshold_value && isAboveThreshold) {
+               if(dest[i] < FSK_PSK_THRESHOLD && isAboveThreshold) {
                        thresholdCnt++;
                        if (thresholdCnt > 2 && waveSizeCnt < expWaveSize+1) break;                     
                        isAboveThreshold = false;
                        waveSizeCnt = 0;
-               } else if (dest[i] >= threshold_value && !isAboveThreshold) {
+               } else if (dest[i] >= FSK_PSK_THRESHOLD && !isAboveThreshold) {
                        thresholdCnt++;
                        if (thresholdCnt > 2 && waveSizeCnt < expWaveSize+1) break;                     
                        isAboveThreshold = true;
@@ -220,6 +223,64 @@ size_t findModStart(uint8_t dest[], size_t size, uint8_t threshold_value, uint8_
        return i;
 }
 
+int getClosestClock(int testclk) {
+       uint8_t fndClk[] = {8,16,32,40,50,64,128};
+
+       for (uint8_t clkCnt = 0; clkCnt<7; clkCnt++)
+               if (testclk >= fndClk[clkCnt]-(fndClk[clkCnt]/8) && testclk <= fndClk[clkCnt]+1)
+                       return fndClk[clkCnt];
+
+       return 0;
+}
+
+void getNextLow(uint8_t samples[], size_t size, int low, size_t *i) {
+       while ((samples[*i] > low) && (*i < size))
+               *i+=1;
+}
+
+void getNextHigh(uint8_t samples[], size_t size, int high, size_t *i) {
+       while ((samples[*i] < high) && (*i < size))
+               *i+=1;
+}
+
+// load wave counters
+bool loadWaveCounters(uint8_t samples[], size_t size, int lowToLowWaveLen[], int highToLowWaveLen[], int *waveCnt, int *skip, int *minClk, int *high, int *low) {
+       size_t i=0, firstLow, firstHigh;
+       size_t testsize = (size < 512) ? size : 512;
+
+       if ( getHiLo(samples, testsize, high, low, 80, 80) == -1 ) {
+               if (g_debugMode==2) prnt("DEBUG STT: just noise detected - quitting");
+               return false; //just noise
+       }
+
+       // get to first full low to prime loop and skip incomplete first pulse
+       getNextHigh(samples, size, *high, &i);
+       getNextLow(samples, size, *low, &i);
+       *skip = i;
+
+       // populate tmpbuff buffer with pulse lengths
+       while (i < size) {
+               // measure from low to low
+               firstLow = i;
+               //find first high point for this wave
+               getNextHigh(samples, size, *high, &i);
+               firstHigh = i;
+
+               getNextLow(samples, size, *low, &i);
+
+               if (*waveCnt >= (size/LOWEST_DEFAULT_CLOCK))
+                       break;
+
+               highToLowWaveLen[*waveCnt] = i - firstHigh; //first high to first low
+               lowToLowWaveLen[*waveCnt] = i - firstLow;
+               *waveCnt += 1;
+               if (i-firstLow < *minClk && i < size) {
+                       *minClk = i - firstLow;
+               }
+       }
+       return true;
+}
+
 //by marshmellow
 //amplify based on ask edge detection  -  not accurate enough to use all the time
 void askAmp(uint8_t *BitStream, size_t size) {
@@ -247,280 +308,22 @@ uint32_t manchesterEncode2Bytes(uint16_t datain) {
 
 //by marshmellow
 //encode binary data into binary manchester 
-//NOTE: BitStream must have double the size available in memory to do the swap
+//NOTE: BitStream must have triple the size of "size" available in memory to do the swap
 int ManchesterEncode(uint8_t *BitStream, size_t size) {
-       size_t modIdx=size, i=0;
-       if (size>modIdx) return -1;
+       //allow up to 4K out (means BitStream must be at least 2048+4096 to handle the swap)
+       size = (size>2048) ? 2048 : size;
+       size_t modIdx = size;
+       size_t i;
        for (size_t idx=0; idx < size; idx++){
                BitStream[idx+modIdx++] = BitStream[idx];
                BitStream[idx+modIdx++] = BitStream[idx]^1;
        }
-       for (; i<(size*2); i++){
+       for (i=0; i<(size*2); i++){
                BitStream[i] = BitStream[i+size];
        }
        return i;
 }
 
-//------------------------------Modulation Demods &/or Decoding Section------------------------------------------------------
-
-// look for Sequence Terminator - should be pulses of clk*(1 or 2), clk*2, clk*(1.5 or 2), by idx we mean graph position index...
-bool findST(int *stStopLoc, int *stStartIdx, int lowToLowWaveLen[], int highToLowWaveLen[], int clk, int tol, int buffSize, int i) {
-       for (; i < buffSize - 4; ++i) {
-               *stStartIdx += lowToLowWaveLen[i]; //caution part of this wave may be data and part may be ST....  to be accounted for in main function for now...
-               if (lowToLowWaveLen[i] >= clk*1-tol && lowToLowWaveLen[i] <= (clk*2)+tol && highToLowWaveLen[i] < clk+tol) {           //1 to 2 clocks depending on 2 bits prior
-                       if (lowToLowWaveLen[i+1] >= clk*2-tol && lowToLowWaveLen[i+1] <= clk*2+tol && highToLowWaveLen[i+1] > clk*3/2-tol) {       //2 clocks and wave size is 1 1/2
-                               if (lowToLowWaveLen[i+2] >= (clk*3)/2-tol && lowToLowWaveLen[i+2] <= clk*2+tol && highToLowWaveLen[i+2] > clk-tol) { //1 1/2 to 2 clocks and at least one full clock wave
-                                       if (lowToLowWaveLen[i+3] >= clk*1-tol && lowToLowWaveLen[i+3] <= clk*2+tol) { //1 to 2 clocks for end of ST + first bit
-                                               *stStopLoc = i + 3;
-                                               return true;
-                                       }
-                               }
-                       }
-               }
-       }
-       return false;
-}
-//by marshmellow
-//attempt to identify a Sequence Terminator in ASK modulated raw wave
-bool DetectST_ext(uint8_t buffer[], size_t *size, int *foundclock, size_t *ststart, size_t *stend) {
-       size_t bufsize = *size;
-       //need to loop through all samples and identify our clock, look for the ST pattern
-       uint8_t fndClk[] = {8,16,32,40,50,64,128};
-       int clk = 0; 
-       int tol = 0;
-       int i, j, skip, start, end, low, high, minClk, waveStart;
-       //probably should malloc... || test if memory is available ... handle device side? memory danger!!! [marshmellow]
-       int tmpbuff[bufsize / 32]; // low to low wave count //guess rf/32 clock, if click is smaller we will only have room for a fraction of the samples captured
-       int waveLen[bufsize / 32]; // high to low wave count //if clock is larger then we waste memory in array size that is not needed...
-       size_t testsize = (bufsize < 512) ? bufsize : 512;
-       int phaseoff = 0;
-       high = low = 128;
-       memset(tmpbuff, 0, sizeof(tmpbuff));
-
-       if ( getHiLo(buffer, testsize, &high, &low, 80, 80) == -1 ) {
-               if (g_debugMode==2) prnt("DEBUG STT: just noise detected - quitting");
-               return false; //just noise
-       }
-       i = 0;
-       j = 0;
-       minClk = 255;
-       // get to first full low to prime loop and skip incomplete first pulse
-       while ((buffer[i] < high) && (i < bufsize))
-               ++i;
-       while ((buffer[i] > low) && (i < bufsize))
-               ++i;
-       skip = i;
-
-       // populate tmpbuff buffer with pulse lengths
-       while (i < bufsize) {
-               // measure from low to low
-               while ((buffer[i] > low) && (i < bufsize))
-                       ++i;
-               start= i;
-               while ((buffer[i] < high) && (i < bufsize))
-                       ++i;
-               //first high point for this wave
-               waveStart = i;
-               while ((buffer[i] > low) && (i < bufsize))
-                       ++i;
-               if (j >= (bufsize/32)) {
-                       break;
-               }
-               waveLen[j] = i - waveStart; //first high to first low
-               tmpbuff[j++] = i - start;
-               if (i-start < minClk && i < bufsize) {
-                       minClk = i - start;
-               }
-       }
-       // set clock  - might be able to get this externally and remove this work...
-       if (!clk) {
-               for (uint8_t clkCnt = 0; clkCnt<7; clkCnt++) {
-                       tol = fndClk[clkCnt]/8;
-                       if (minClk >= fndClk[clkCnt]-tol && minClk <= fndClk[clkCnt]+1) { 
-                               clk=fndClk[clkCnt];
-                               break;
-                       }
-               }
-               // clock not found - ERROR
-               if (!clk) {
-                       if (g_debugMode==2) prnt("DEBUG STT: clock not found - quitting");
-                       return false;
-               }
-       } else tol = clk/8;
-
-       *foundclock = clk;
-       i=0;
-       if (!findST(&start, &skip, tmpbuff, waveLen, clk, tol, j, i)) {
-               // first ST not found - ERROR
-               if (g_debugMode==2) prnt("DEBUG STT: first STT not found - quitting");
-               return false;
-       } else {
-               if (g_debugMode==2) prnt("DEBUG STT: first STT found at: %d, j=%d",start, j);
-       }
-       if (waveLen[i+2] > clk*1+tol)
-               phaseoff = 0;
-       else
-               phaseoff = clk/2;
-       
-       // skip over the remainder of ST
-       skip += clk*7/2; //3.5 clocks from tmpbuff[i] = end of st - also aligns for ending point
-
-       // now do it again to find the end
-       int dummy1 = 0;
-       end = skip;
-       if (!findST(&dummy1, &end, tmpbuff, waveLen, clk, tol, j, i+3)) {
-               //didn't find second ST - ERROR
-               if (g_debugMode==2) prnt("DEBUG STT: second STT not found - quitting");
-               return false;
-       }
-       end -= phaseoff;
-       if (g_debugMode==2) prnt("DEBUG STT: start of data: %d end of data: %d, datalen: %d, clk: %d, bits: %d, phaseoff: %d", skip, end, end-skip, clk, (end-skip)/clk, phaseoff);
-       //now begin to trim out ST so we can use normal demod cmds
-       start = skip;
-       size_t datalen = end - start;
-       // check validity of datalen (should be even clock increments)  - use a tolerance of up to 1/8th a clock
-       if ( clk - (datalen % clk) <= clk/8) {
-               // padd the amount off - could be problematic...  but shouldn't happen often
-               datalen += clk - (datalen % clk);
-       } else if ( (datalen % clk) <= clk/8 ) {
-               // padd the amount off - could be problematic...  but shouldn't happen often
-               datalen -= datalen % clk;
-       } else {
-               if (g_debugMode==2) prnt("DEBUG STT: datalen not divisible by clk: %u %% %d = %d - quitting", datalen, clk, datalen % clk);
-               return false;
-       }
-       // if datalen is less than one t55xx block - ERROR
-       if (datalen/clk < 8*4) {
-               if (g_debugMode==2) prnt("DEBUG STT: datalen is less than 1 full t55xx block - quitting");              
-               return false;
-       }
-       size_t dataloc = start;
-       if (buffer[dataloc-(clk*4)-(clk/8)] <= low && buffer[dataloc] <= low && buffer[dataloc-(clk*4)] >= high) {
-               //we have low drift (and a low just before the ST and a low just after the ST) - compensate by backing up the start 
-               for ( i=0; i <= (clk/8); ++i ) {
-                       if ( buffer[dataloc - (clk*4) - i] <= low ) {
-                               dataloc -= i;
-                               break;
-                       }
-               }
-       }
-       
-       size_t newloc = 0;
-       i=0;
-       if (g_debugMode==2) prnt("DEBUG STT: Starting STT trim - start: %d, datalen: %d ",dataloc, datalen);            
-       bool firstrun = true;
-       // warning - overwriting buffer given with raw wave data with ST removed...
-       while ( dataloc < bufsize-(clk/2) ) {
-               //compensate for long high at end of ST not being high due to signal loss... (and we cut out the start of wave high part)
-               if (buffer[dataloc]<high && buffer[dataloc]>low && buffer[dataloc+3]<high && buffer[dataloc+3]>low) {
-                       for(i=0; i < clk/2-tol; ++i) {
-                               buffer[dataloc+i] = high+5;
-                       }
-               } //test for single sample outlier (high between two lows) in the case of very strong waves
-               if (buffer[dataloc] >= high && buffer[dataloc+2] <= low) {
-                       buffer[dataloc] = buffer[dataloc+2];
-                       buffer[dataloc+1] = buffer[dataloc+2];
-               }
-               if (firstrun) {
-                       *stend = dataloc;
-                       *ststart = dataloc-(clk*4);
-                       firstrun=false;
-               }
-               for (i=0; i<datalen; ++i) {
-                       if (i+newloc < bufsize) {
-                               if (i+newloc < dataloc)
-                                       buffer[i+newloc] = buffer[dataloc];
-
-                               dataloc++;
-                       }
-               }
-               newloc += i;
-               //skip next ST  -  we just assume it will be there from now on...
-               if (g_debugMode==2) prnt("DEBUG STT: skipping STT at %d to %d", dataloc, dataloc+(clk*4));
-               dataloc += clk*4;
-       }
-       *size = newloc;
-       return true;
-}
-bool DetectST(uint8_t  buffer[], size_t *size, int *foundclock) {
-       size_t ststart = 0, stend = 0;
-       return DetectST_ext(buffer, size, foundclock, &ststart, &stend);
-}
-
-//by marshmellow
-//take 01 or 10 = 1 and 11 or 00 = 0
-//check for phase errors - should never have 111 or 000 should be 01001011 or 10110100 for 1010
-//decodes biphase or if inverted it is AKA conditional dephase encoding AKA differential manchester encoding
-int BiphaseRawDecode(uint8_t *BitStream, size_t *size, int offset, int invert) {
-       uint16_t bitnum = 0;
-       uint16_t errCnt = 0;
-       size_t i = offset;
-       uint16_t MaxBits=512;
-       //if not enough samples - error
-       if (*size < 51) return -1;
-       //check for phase change faults - skip one sample if faulty
-       uint8_t offsetA = 1, offsetB = 1;
-       for (; i<48; i+=2){
-               if (BitStream[i+1]==BitStream[i+2]) offsetA=0; 
-               if (BitStream[i+2]==BitStream[i+3]) offsetB=0;                                  
-       }
-       if (!offsetA && offsetB) offset++;
-       for (i=offset; i<*size-3; i+=2){
-               //check for phase error
-               if (BitStream[i+1]==BitStream[i+2]) {
-                       BitStream[bitnum++]=7;
-                       errCnt++;
-               }
-               if((BitStream[i]==1 && BitStream[i+1]==0) || (BitStream[i]==0 && BitStream[i+1]==1)){
-                       BitStream[bitnum++]=1^invert;
-               } else if((BitStream[i]==0 && BitStream[i+1]==0) || (BitStream[i]==1 && BitStream[i+1]==1)){
-                       BitStream[bitnum++]=invert;
-               } else {
-                       BitStream[bitnum++]=7;
-                       errCnt++;
-               }
-               if(bitnum>MaxBits) break;
-       }
-       *size=bitnum;
-       return errCnt;
-}
-
-//by marshmellow
-//take 10 and 01 and manchester decode
-//run through 2 times and take least errCnt
-int manrawdecode(uint8_t * BitStream, size_t *size, uint8_t invert, uint8_t *alignPos) {
-       uint16_t bitnum=0, MaxBits = 512, errCnt = 0;
-       size_t i, ii;
-       uint16_t bestErr = 1000, bestRun = 0;
-       if (*size < 16) return -1;
-       //find correct start position [alignment]
-       for (ii=0;ii<2;++ii){
-               for (i=ii; i<*size-3; i+=2)
-                       if (BitStream[i]==BitStream[i+1])
-                               errCnt++;
-
-               if (bestErr>errCnt){
-                       bestErr=errCnt;
-                       bestRun=ii;
-               }
-               errCnt=0;
-       }
-       *alignPos=bestRun;
-       //decode
-       for (i=bestRun; i < *size-3; i+=2){
-               if(BitStream[i] == 1 && (BitStream[i+1] == 0)){
-                       BitStream[bitnum++]=invert;
-               } else if((BitStream[i] == 0) && BitStream[i+1] == 1){
-                       BitStream[bitnum++]=invert^1;
-               } else {
-                       BitStream[bitnum++]=7;
-               }
-               if(bitnum>MaxBits) break;
-       }
-       *size=bitnum;
-       return bestErr;
-}
-
 // by marshmellow
 // to detect a wave that has heavily clipped (clean) samples
 uint8_t DetectCleanAskWave(uint8_t dest[], size_t size, uint8_t high, uint8_t low) {
@@ -540,1056 +343,1302 @@ uint8_t DetectCleanAskWave(uint8_t dest[], size_t size, uint8_t high, uint8_t lo
        return allArePeaks;
 }
 
-//by marshmellow
-//demodulates strong heavily clipped samples
-int cleanAskRawDemod(uint8_t *BinStream, size_t *size, int clk, int invert, int high, int low, int *startIdx)
-{
-       *startIdx=0;
-       size_t bitCnt=0, smplCnt=1, errCnt=0;
-       bool waveHigh = (BinStream[0] >= high);
-       for (size_t i=1; i < *size; i++){
-               if (BinStream[i] >= high && waveHigh){
-                       smplCnt++;
-               } else if (BinStream[i] <= low && !waveHigh){
-                       smplCnt++;
-               } else { //transition
-                       if ((BinStream[i] >= high && !waveHigh) || (BinStream[i] <= low && waveHigh)){
-                               if (smplCnt > clk-(clk/4)-1) { //full clock
-                                       if (smplCnt > clk + (clk/4)+1) { //too many samples
-                                               errCnt++;
-                                               if (g_debugMode==2) prnt("DEBUG ASK: Modulation Error at: %u", i);
-                                               BinStream[bitCnt++] = 7;
-                                       } else if (waveHigh) {
-                                               BinStream[bitCnt++] = invert;
-                                               BinStream[bitCnt++] = invert;
-                                       } else if (!waveHigh) {
-                                               BinStream[bitCnt++] = invert ^ 1;
-                                               BinStream[bitCnt++] = invert ^ 1;
-                                       }
-                                       if (*startIdx==0) *startIdx = i-clk;
-                                       waveHigh = !waveHigh;  
-                                       smplCnt = 0;
-                               } else if (smplCnt > (clk/2) - (clk/4)-1) { //half clock
-                                       if (waveHigh) {
-                                               BinStream[bitCnt++] = invert;
-                                       } else if (!waveHigh) {
-                                               BinStream[bitCnt++] = invert ^ 1;
-                                       }
-                                       if (*startIdx==0) *startIdx = i-(clk/2);
-                                       waveHigh = !waveHigh;  
-                                       smplCnt = 0;
-                               } else {
-                                       smplCnt++;
-                                       //transition bit oops
-                               }
-                       } else { //haven't hit new high or new low yet
-                               smplCnt++;
-                       }
-               }
-       }
-       *size = bitCnt;
-       return errCnt;
-}
+//**********************************************************************************************
+//-------------------Clock / Bitrate Detection Section------------------------------------------
+//**********************************************************************************************
 
-//by marshmellow
-//attempts to demodulate ask modulations, askType == 0 for ask/raw, askType==1 for ask/manchester
-int askdemod_ext(uint8_t *BinStream, size_t *size, int *clk, int *invert, int maxErr, uint8_t amp, uint8_t askType, int *startIdx) {
-       if (*size==0) return -1;
-       int start = DetectASKClock(BinStream, *size, clk, maxErr); //clock default
-       if (*clk==0 || start < 0) return -3;
-       if (*invert != 1) *invert = 0;
-       if (amp==1) askAmp(BinStream, *size);
-       if (g_debugMode==2) prnt("DEBUG ASK: clk %d, beststart %d, amp %d", *clk, start, amp);
+// by marshmellow
+// to help detect clocks on heavily clipped samples
+// based on count of low to low
+int DetectStrongAskClock(uint8_t dest[], size_t size, int high, int low, int *clock) {
+       size_t startwave;
+       size_t i = 100;
+       size_t minClk = 255;
+       int shortestWaveIdx = 0;
+               // get to first full low to prime loop and skip incomplete first pulse
+       getNextHigh(dest, size, high, &i);
+       getNextLow(dest, size, low, &i);
 
-       //start pos from detect ask clock is 1/2 clock offset
-       // NOTE: can be negative (demod assumes rest of wave was there)
-       *startIdx = start - (*clk/2); 
-       uint8_t initLoopMax = 255;
-       if (initLoopMax > *size) initLoopMax = *size;
-       // Detect high and lows
-       //25% clip in case highs and lows aren't clipped [marshmellow]
-       int high, low;
-       if (getHiLo(BinStream, initLoopMax, &high, &low, 75, 75) < 1) 
-               return -2; //just noise
+       // loop through all samples
+       while (i < size) {
+               // measure from low to low
+               startwave = i;
 
-       size_t errCnt = 0;
-       // if clean clipped waves detected run alternate demod
-       if (DetectCleanAskWave(BinStream, *size, high, low)) {
-               if (g_debugMode==2) prnt("DEBUG ASK: Clean Wave Detected - using clean wave demod");
-               errCnt = cleanAskRawDemod(BinStream, size, *clk, *invert, high, low, startIdx);
-               if (askType) { //askman
-                       uint8_t alignPos = 0;
-                       errCnt = manrawdecode(BinStream, size, 0, &alignPos);
-                       *startIdx += *clk/2 * alignPos;
-                       if (g_debugMode) prnt("DEBUG ASK CLEAN: startIdx %i, alignPos %u", *startIdx, alignPos);
-                       return errCnt;
-               } else { //askraw
-                       return errCnt;
+               getNextHigh(dest, size, high, &i);
+               getNextLow(dest, size, low, &i);
+               //get minimum measured distance
+               if (i-startwave < minClk && i < size) {
+                       minClk = i - startwave;
+                       shortestWaveIdx = startwave;
                }
        }
-       if (g_debugMode) prnt("DEBUG ASK WEAK: startIdx %i", *startIdx);
-       if (g_debugMode==2) prnt("DEBUG ASK: Weak Wave Detected - using weak wave demod");
+       // set clock
+       if (g_debugMode==2) prnt("DEBUG ASK: DetectStrongAskClock smallest wave: %d",minClk);
+       *clock = getClosestClock(minClk);
+       if (*clock == 0) 
+               return 0;
+       
+       return shortestWaveIdx;
+}
 
-       int lastBit;              //set first clock check - can go negative
-       size_t i, bitnum = 0;     //output counter
-       uint8_t midBit = 0;
-       uint8_t tol = 0;          //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave
-       if (*clk <= 32) tol = 1;  //clock tolerance may not be needed anymore currently set to + or - 1 but could be increased for poor waves or removed entirely
-       size_t MaxBits = 3072;    //max bits to collect
-       lastBit = start - *clk;
+// by marshmellow
+// not perfect especially with lower clocks or VERY good antennas (heavy wave clipping)
+// maybe somehow adjust peak trimming value based on samples to fix?
+// return start index of best starting position for that clock and return clock (by reference)
+int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr) {
+       size_t i=1;
+       uint8_t clk[] = {255,8,16,32,40,50,64,100,128,255};
+       uint8_t clkEnd = 9;
+       uint8_t loopCnt = 255;  //don't need to loop through entire array...
+       if (size <= loopCnt+60) return -1; //not enough samples
+       size -= 60; //sometimes there is a strange end wave - filter out this....
+       //if we already have a valid clock
+       uint8_t clockFnd=0;
+       for (;i<clkEnd;++i)
+               if (clk[i] == *clock) clockFnd = i;
+               //clock found but continue to find best startpos
 
-       for (i = start; i < *size; ++i) {
-               if (i-lastBit >= *clk-tol){
-                       if (BinStream[i] >= high) {
-                               BinStream[bitnum++] = *invert;
-                       } else if (BinStream[i] <= low) {
-                               BinStream[bitnum++] = *invert ^ 1;
-                       } else if (i-lastBit >= *clk+tol) {
-                               if (bitnum > 0) {
-                                       if (g_debugMode==2) prnt("DEBUG ASK: Modulation Error at: %u", i);
-                                       BinStream[bitnum++]=7;
-                                       errCnt++;                                               
-                               } 
-                       } else { //in tolerance - looking for peak
-                               continue;
-                       }
-                       midBit = 0;
-                       lastBit += *clk;
-               } else if (i-lastBit >= (*clk/2-tol) && !midBit && !askType){
-                       if (BinStream[i] >= high) {
-                               BinStream[bitnum++] = *invert;
-                       } else if (BinStream[i] <= low) {
-                               BinStream[bitnum++] = *invert ^ 1;
-                       } else if (i-lastBit >= *clk/2+tol) {
-                               BinStream[bitnum] = BinStream[bitnum-1];
-                               bitnum++;
-                       } else { //in tolerance - looking for peak
-                               continue;
+       //get high and low peak
+       int peak, low;
+       if (getHiLo(dest, loopCnt, &peak, &low, 75, 75) < 1) return -1;
+       
+       //test for large clean peaks
+       if (!clockFnd){
+               if (DetectCleanAskWave(dest, size, peak, low)==1){
+                       int ans = DetectStrongAskClock(dest, size, peak, low, clock);
+                       if (g_debugMode==2) prnt("DEBUG ASK: detectaskclk Clean Ask Wave Detected: clk %i, ShortestWave: %i",clock, ans);
+                       if (ans > 0) {
+                               return ans; //return shortest wave start position
                        }
-                       midBit = 1;
                }
-               if (bitnum >= MaxBits) break;
        }
-       *size = bitnum;
-       return errCnt;
-}
+       uint8_t ii;
+       uint8_t clkCnt, tol = 0;
+       uint16_t bestErr[]={1000,1000,1000,1000,1000,1000,1000,1000,1000};
+       uint8_t bestStart[]={0,0,0,0,0,0,0,0,0};
+       size_t errCnt = 0;
+       size_t arrLoc, loopEnd;
 
-int askdemod(uint8_t *BinStream, size_t *size, int *clk, int *invert, int maxErr, uint8_t amp, uint8_t askType) {
-       int start = 0;
-       return askdemod_ext(BinStream, size, clk, invert, maxErr, amp, askType, &start);
-}
+       if (clockFnd>0) {
+               clkCnt = clockFnd;
+               clkEnd = clockFnd+1;
+       }
+       else clkCnt=1;
 
-// by marshmellow - demodulate NRZ wave - requires a read with strong signal
-// peaks invert bit (high=1 low=0) each clock cycle = 1 bit determined by last peak
-int nrzRawDemod_ext(uint8_t *dest, size_t *size, int *clk, int *invert, int *startIdx) {
-       if (justNoise(dest, *size)) return -1;
-       *clk = DetectNRZClock(dest, *size, *clk);
-       if (*clk==0) return -2;
-       size_t i, gLen = 4096;
-       if (gLen>*size) gLen = *size-20;
-       int high, low;
-       if (getHiLo(dest, gLen, &high, &low, 75, 75) < 1) return -3; //25% fuzz on high 25% fuzz on low
-       
-       uint8_t bit=0;
-       //convert wave samples to 1's and 0's
-       for(i=20; i < *size-20; i++){
-               if (dest[i] >= high) bit = 1;
-               if (dest[i] <= low)  bit = 0;
-               dest[i] = bit;
+       //test each valid clock from smallest to greatest to see which lines up
+       for(; clkCnt < clkEnd; clkCnt++){
+               if (clk[clkCnt] <= 32){
+                       tol=1;
+               }else{
+                       tol=0;
+               }
+               //if no errors allowed - keep start within the first clock
+               if (!maxErr && size > clk[clkCnt]*2 + tol && clk[clkCnt]<128) loopCnt=clk[clkCnt]*2;
+               bestErr[clkCnt]=1000;
+               //try lining up the peaks by moving starting point (try first few clocks)
+               for (ii=0; ii < loopCnt; ii++){
+                       if (dest[ii] < peak && dest[ii] > low) continue;
+
+                       errCnt=0;
+                       // now that we have the first one lined up test rest of wave array
+                       loopEnd = ((size-ii-tol) / clk[clkCnt]) - 1;
+                       for (i=0; i < loopEnd; ++i){
+                               arrLoc = ii + (i * clk[clkCnt]);
+                               if (dest[arrLoc] >= peak || dest[arrLoc] <= low){
+                               }else if (dest[arrLoc-tol] >= peak || dest[arrLoc-tol] <= low){
+                               }else if (dest[arrLoc+tol] >= peak || dest[arrLoc+tol] <= low){
+                               }else{  //error no peak detected
+                                       errCnt++;
+                               }
+                       }
+                       //if we found no errors then we can stop here and a low clock (common clocks)
+                       //  this is correct one - return this clock
+                       if (g_debugMode == 2) prnt("DEBUG ASK: clk %d, err %d, startpos %d, endpos %d",clk[clkCnt],errCnt,ii,i);
+                       if(errCnt==0 && clkCnt<7) { 
+                               if (!clockFnd) *clock = clk[clkCnt];
+                               return ii;
+                       }
+                       //if we found errors see if it is lowest so far and save it as best run
+                       if(errCnt<bestErr[clkCnt]){
+                               bestErr[clkCnt]=errCnt;
+                               bestStart[clkCnt]=ii;
+                       }
+               }
        }
-       //now demod based on clock (rf/32 = 32 1's for one 1 bit, 32 0's for one 0 bit) 
-       size_t lastBit = 0;
-       size_t numBits = 0;
-       for(i=21; i < *size-20; i++) {
-               //if transition detected or large number of same bits - store the passed bits
-               if (dest[i] != dest[i-1] || (i-lastBit) == (10 * *clk)) {
-                       memset(dest+numBits, dest[i-1] ^ *invert, (i - lastBit + (*clk/4)) / *clk);
-                       numBits += (i - lastBit + (*clk/4)) / *clk;
-                       if (lastBit == 0) {
-                               *startIdx = i - (numBits * *clk);
-                               if (g_debugMode==2) prnt("DEBUG NRZ: startIdx %i", *startIdx);
+       uint8_t iii;
+       uint8_t best=0;
+       for (iii=1; iii<clkEnd; ++iii){
+               if (bestErr[iii] < bestErr[best]){
+                       if (bestErr[iii] == 0) bestErr[iii]=1;
+                       // current best bit to error ratio     vs  new bit to error ratio
+                       if ( (size/clk[best])/bestErr[best] < (size/clk[iii])/bestErr[iii] ){
+                               best = iii;
                        }
-                       lastBit = i-1;
                }
+               if (g_debugMode == 2) prnt("DEBUG ASK: clk %d, # Errors %d, Current Best Clk %d, bestStart %d",clk[iii],bestErr[iii],clk[best],bestStart[best]);
        }
-       *size = numBits;
-       return 0;
-}
-int nrzRawDemod(uint8_t *dest, size_t *size, int *clk, int *invert) {
-       int startIdx = 0;
-       return nrzRawDemod_ext(dest, size, clk, invert, &startIdx);
+       if (!clockFnd) *clock = clk[best];
+       return bestStart[best];
 }
 
-//translate wave to 11111100000 (1 for each short wave [higher freq] 0 for each long wave [lower freq])
-size_t fsk_wave_demod(uint8_t * dest, size_t size, uint8_t fchigh, uint8_t fclow, int *startIdx) {
-       size_t last_transition = 0;
-       size_t idx = 1;
-       if (fchigh==0) fchigh=10;
-       if (fclow==0) fclow=8;
-       //set the threshold close to 0 (graph) or 128 std to avoid static
-       uint8_t threshold_value = 123; 
-       size_t preLastSample = 0;
-       size_t LastSample = 0;
-       size_t currSample = 0;
-       if ( size < 1024 ) return 0; // not enough samples
+int DetectStrongNRZClk(uint8_t *dest, size_t size, int peak, int low){
+       //find shortest transition from high to low
+       size_t i = 0;
+       size_t transition1 = 0;
+       int lowestTransition = 255;
+       bool lastWasHigh = false;
 
-       //find start of modulating data in trace 
-       idx = findModStart(dest, size, threshold_value, fchigh);
-       // Need to threshold first sample
-       if(dest[idx] < threshold_value) dest[0] = 0;
-       else dest[0] = 1;
-       
-       last_transition = idx;
-       idx++;
-       size_t numBits = 0;
-       // count cycles between consecutive lo-hi transitions, there should be either 8 (fc/8)
-       // or 10 (fc/10) cycles but in practice due to noise etc we may end up with anywhere
-       // between 7 to 11 cycles so fuzz it by treat anything <9 as 8 and anything else as 10
-       //  (could also be fc/5 && fc/7 for fsk1 = 4-9)
-       for(; idx < size; idx++) {
-               // threshold current value
-               if (dest[idx] < threshold_value) dest[idx] = 0;
-               else dest[idx] = 1;
+       //find first valid beginning of a high or low wave
+       while ((dest[i] >= peak || dest[i] <= low) && (i < size))
+               ++i;
+       while ((dest[i] < peak && dest[i] > low) && (i < size))
+               ++i;
+       lastWasHigh = (dest[i] >= peak);
 
-               // Check for 0->1 transition
-               if (dest[idx-1] < dest[idx]) {
-                       preLastSample = LastSample;
-                       LastSample = currSample;
-                       currSample = idx-last_transition;
-                       if (currSample < (fclow-2)) {                   //0-5 = garbage noise (or 0-3)
-                               //do nothing with extra garbage
-                       } else if (currSample < (fchigh-1)) {           //6-8 = 8 sample waves  (or 3-6 = 5)
-                               //correct previous 9 wave surrounded by 8 waves (or 6 surrounded by 5)
-                               if (numBits > 1 && LastSample > (fchigh-2) && (preLastSample < (fchigh-1))){
-                                       dest[numBits-1]=1;
-                               }
-                               dest[numBits++]=1;
-                       if (numBits > 0 && *startIdx==0) *startIdx = idx - fclow;
-                       } else if (currSample > (fchigh+1) && numBits < 3) { //12 + and first two bit = unusable garbage
-                               //do nothing with beginning garbage and reset..  should be rare..
-                               numBits = 0; 
-                       } else if (currSample == (fclow+1) && LastSample == (fclow-1)) { // had a 7 then a 9 should be two 8's (or 4 then a 6 should be two 5's)
-                               dest[numBits++]=1;
-                       if (numBits > 0 && *startIdx==0) *startIdx = idx - fclow;
-                       } else {                                        //9+ = 10 sample waves (or 6+ = 7)
-                               dest[numBits++]=0;
-                       if (numBits > 0 && *startIdx==0) *startIdx = idx - fchigh;
-                       }
-                       last_transition = idx;
+       if (i==size) return 0;
+       transition1 = i;
+
+       for (;i < size; i++) {
+               if ((dest[i] >= peak && !lastWasHigh) || (dest[i] <= low && lastWasHigh)) {
+                       lastWasHigh = (dest[i] >= peak);
+                       if (i-transition1 < lowestTransition) lowestTransition = i-transition1;
+                       transition1 = i;
                }
        }
-       return numBits; //Actually, it returns the number of bytes, but each byte represents a bit: 1 or 0
+       if (lowestTransition == 255) lowestTransition = 0;
+       if (g_debugMode==2) prnt("DEBUG NRZ: detectstrongNRZclk smallest wave: %d",lowestTransition);
+       return lowestTransition;
 }
 
-//translate 11111100000 to 10
-//rfLen = clock, fchigh = larger field clock, fclow = smaller field clock
-size_t aggregate_bits(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t invert, uint8_t fchigh, uint8_t fclow, int *startIdx) {
-       uint8_t lastval=dest[0];
-       size_t idx=0;
-       size_t numBits=0;
-       uint32_t n=1;
-       for( idx=1; idx < size; idx++) {
-               n++;
-               if (dest[idx]==lastval) continue; //skip until we hit a transition
-               
-               //find out how many bits (n) we collected (use 1/2 clk tolerance)
-               //if lastval was 1, we have a 1->0 crossing
-               if (dest[idx-1]==1) {
-                       n = (n * fclow + rfLen/2) / rfLen;
-               } else {// 0->1 crossing 
-                       n = (n * fchigh + rfLen/2) / rfLen; 
+//by marshmellow
+//detect nrz clock by reading #peaks vs no peaks(or errors)
+int DetectNRZClock(uint8_t dest[], size_t size, int clock, size_t *clockStartIdx) {
+       size_t i=0;
+       uint8_t clk[]={8,16,32,40,50,64,100,128,255};
+       size_t loopCnt = 4096;  //don't need to loop through entire array...
+       if (size == 0) return 0;
+       if (size<loopCnt) loopCnt = size-20;
+       //if we already have a valid clock quit
+       for (; i < 8; ++i)
+               if (clk[i] == clock) return clock;
+
+       //get high and low peak
+       int peak, low;
+       if (getHiLo(dest, loopCnt, &peak, &low, 75, 75) < 1) return 0;
+
+       int lowestTransition = DetectStrongNRZClk(dest, size-20, peak, low);
+       size_t ii;
+       uint8_t clkCnt;
+       uint8_t tol = 0;
+       uint16_t smplCnt = 0;
+       int16_t peakcnt = 0;
+       int16_t peaksdet[] = {0,0,0,0,0,0,0,0};
+       uint16_t maxPeak = 255;
+       bool firstpeak = false;
+       //test for large clipped waves
+       for (i=0; i<loopCnt; i++){
+               if (dest[i] >= peak || dest[i] <= low){
+                       if (!firstpeak) continue;
+                       smplCnt++;
+               } else {
+                       firstpeak=true;
+                       if (smplCnt > 6 ){
+                               if (maxPeak > smplCnt){
+                                       maxPeak = smplCnt;
+                                       //prnt("maxPk: %d",maxPeak);
+                               }
+                               peakcnt++;
+                               //prnt("maxPk: %d, smplCnt: %d, peakcnt: %d",maxPeak,smplCnt,peakcnt);
+                               smplCnt=0;
+                       }
                }
-               if (n == 0) n = 1;
-               
-               //first transition - save startidx
-               if (numBits == 0) {
-                       if (lastval == 1) {  //high to low
-                               *startIdx += (fclow * idx) - (n*rfLen);
-                               if (g_debugMode==2) prnt("DEBUG FSK: startIdx %i, fclow*idx %i, n*rflen %u", *startIdx, fclow*(idx), n*rfLen);
-                       } else {
-                               *startIdx += (fchigh * idx) - (n*rfLen);
-                               if (g_debugMode==2) prnt("DEBUG FSK: startIdx %i, fchigh*idx %i, n*rflen %u", *startIdx, fchigh*(idx), n*rfLen);
+       }
+       bool errBitHigh = 0;
+       bool bitHigh = 0;
+       uint8_t ignoreCnt = 0;
+       uint8_t ignoreWindow = 4;
+       bool lastPeakHigh = 0;
+       int lastBit = 0; 
+       size_t bestStart[]={0,0,0,0,0,0,0,0,0};
+       peakcnt=0;
+       //test each valid clock from smallest to greatest to see which lines up
+       for(clkCnt=0; clkCnt < 8; ++clkCnt){
+               //ignore clocks smaller than smallest peak
+               if (clk[clkCnt] < maxPeak - (clk[clkCnt]/4)) continue;
+               //try lining up the peaks by moving starting point (try first 256)
+               for (ii=20; ii < loopCnt; ++ii){
+                       if ((dest[ii] >= peak) || (dest[ii] <= low)){
+                               peakcnt = 0;
+                               bitHigh = false;
+                               ignoreCnt = 0;
+                               lastBit = ii-clk[clkCnt]; 
+                               //loop through to see if this start location works
+                               for (i = ii; i < size-20; ++i) {
+                                       //if we are at a clock bit
+                                       if ((i >= lastBit + clk[clkCnt] - tol) && (i <= lastBit + clk[clkCnt] + tol)) {
+                                               //test high/low
+                                               if (dest[i] >= peak || dest[i] <= low) {
+                                                       //if same peak don't count it
+                                                       if ((dest[i] >= peak && !lastPeakHigh) || (dest[i] <= low && lastPeakHigh)) {
+                                                               peakcnt++;
+                                                       }
+                                                       lastPeakHigh = (dest[i] >= peak);
+                                                       bitHigh = true;
+                                                       errBitHigh = false;
+                                                       ignoreCnt = ignoreWindow;
+                                                       lastBit += clk[clkCnt];
+                                               } else if (i == lastBit + clk[clkCnt] + tol) {
+                                                       lastBit += clk[clkCnt];
+                                               }
+                                       //else if not a clock bit and no peaks
+                                       } else if (dest[i] < peak && dest[i] > low){
+                                               if (ignoreCnt==0){
+                                                       bitHigh=false;
+                                                       if (errBitHigh==true) peakcnt--;
+                                                       errBitHigh=false;
+                                               } else {
+                                                       ignoreCnt--;
+                                               }
+                                               // else if not a clock bit but we have a peak
+                                       } else if ((dest[i]>=peak || dest[i]<=low) && (!bitHigh)) {
+                                               //error bar found no clock...
+                                               errBitHigh=true;
+                                       }
+                               }
+                               if(peakcnt>peaksdet[clkCnt]) {
+                                       bestStart[clkCnt]=ii;
+                                       peaksdet[clkCnt]=peakcnt;
+                               }
                        }
                }
-
-               //add to our destination the bits we collected          
-               memset(dest+numBits, dest[idx-1]^invert , n);
-               numBits += n;
-               n=0;
-               lastval=dest[idx];
-       }//end for
-       // if valid extra bits at the end were all the same frequency - add them in
-       if (n > rfLen/fchigh) {
-               if (dest[idx-2]==1) {
-                       n = (n * fclow + rfLen/2) / rfLen;
-               } else {
-                       n = (n * fchigh + rfLen/2) / rfLen;
+       }
+       int iii=7;
+       uint8_t best=0;
+       for (iii=7; iii > 0; iii--){
+               if ((peaksdet[iii] >= (peaksdet[best]-1)) && (peaksdet[iii] <= peaksdet[best]+1) && lowestTransition) {
+                       if (clk[iii] > (lowestTransition - (clk[iii]/8)) && clk[iii] < (lowestTransition + (clk[iii]/8))) {
+                               best = iii;
+                       }
+               } else if (peaksdet[iii] > peaksdet[best]){
+                       best = iii;
                }
-               memset(dest+numBits, dest[idx-1]^invert , n);
-               numBits += n;
+               if (g_debugMode==2) prnt("DEBUG NRZ: Clk: %d, peaks: %d, maxPeak: %d, bestClk: %d, lowestTrs: %d",clk[iii],peaksdet[iii],maxPeak, clk[best], lowestTransition);
        }
-       return numBits;
+       *clockStartIdx  = bestStart[best];
+       return clk[best];
 }
 
-//by marshmellow  (from holiman's base)
-// full fsk demod from GraphBuffer wave to decoded 1s and 0s (no mandemod)
-int fskdemod_ext(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t invert, uint8_t fchigh, uint8_t fclow, int *startIdx) {
-       // FSK demodulator
-       size = fsk_wave_demod(dest, size, fchigh, fclow, startIdx);
-       size = aggregate_bits(dest, size, rfLen, invert, fchigh, fclow, startIdx);
-       return size;
-}
+//by marshmellow
+//countFC is to detect the field clock lengths.
+//counts and returns the 2 most common wave lengths
+//mainly used for FSK field clock detection
+uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj) {
+       uint8_t fcLens[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+       uint16_t fcCnts[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+       uint8_t fcLensFnd = 0;
+       uint8_t lastFCcnt = 0;
+       uint8_t fcCounter = 0;
+       size_t i;
+       if (size < 180) return 0;
 
-int fskdemod(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t invert, uint8_t fchigh, uint8_t fclow) {
-       int startIdx=0;
-       return fskdemod_ext(dest, size, rfLen, invert, fchigh, fclow, &startIdx);
-}
+       // prime i to first up transition
+       for (i = 160; i < size-20; i++)
+               if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1])
+                       break;
 
-// by marshmellow
-// convert psk1 demod to psk2 demod
-// only transition waves are 1s
-void psk1TOpsk2(uint8_t *BitStream, size_t size) {
-       size_t i=1;
-       uint8_t lastBit=BitStream[0];
-       for (; i<size; i++){
-               if (BitStream[i]==7){
-                       //ignore errors
-               } else if (lastBit!=BitStream[i]){
-                       lastBit=BitStream[i];
-                       BitStream[i]=1;
+       for (; i < size-20; i++){
+               if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1]){
+                       // new up transition
+                       fcCounter++;
+                       if (fskAdj){
+                               //if we had 5 and now have 9 then go back to 8 (for when we get a fc 9 instead of an 8)
+                               if (lastFCcnt==5 && fcCounter==9) fcCounter--;
+                               //if fc=9 or 4 add one (for when we get a fc 9 instead of 10 or a 4 instead of a 5)
+                               if ((fcCounter==9) || fcCounter==4) fcCounter++;
+                       // save last field clock count  (fc/xx)
+                       lastFCcnt = fcCounter;
+                       }
+                       // find which fcLens to save it to:
+                       for (int ii=0; ii<15; ii++){
+                               if (fcLens[ii]==fcCounter){
+                                       fcCnts[ii]++;
+                                       fcCounter=0;
+                                       break;
+                               }
+                       }
+                       if (fcCounter>0 && fcLensFnd<15){
+                               //add new fc length 
+                               fcCnts[fcLensFnd]++;
+                               fcLens[fcLensFnd++]=fcCounter;
+                       }
+                       fcCounter=0;
                } else {
-                       BitStream[i]=0;
+                       // count sample
+                       fcCounter++;
                }
        }
-       return;
-}
-
-// by marshmellow
-// convert psk2 demod to psk1 demod
-// from only transition waves are 1s to phase shifts change bit
-void psk2TOpsk1(uint8_t *BitStream, size_t size) {
-       uint8_t phase=0;
-       for (size_t i=0; i<size; i++){
-               if (BitStream[i]==1){
-                       phase ^=1;
+       
+       uint8_t best1=14, best2=14, best3=14;
+       uint16_t maxCnt1=0;
+       // go through fclens and find which ones are bigest 2  
+       for (i=0; i<15; i++){
+               // get the 3 best FC values
+               if (fcCnts[i]>maxCnt1) {
+                       best3=best2;
+                       best2=best1;
+                       maxCnt1=fcCnts[i];
+                       best1=i;
+               } else if(fcCnts[i]>fcCnts[best2]){
+                       best3=best2;
+                       best2=i;
+               } else if(fcCnts[i]>fcCnts[best3]){
+                       best3=i;
                }
-               BitStream[i]=phase;
+               if (g_debugMode==2) prnt("DEBUG countfc: FC %u, Cnt %u, best fc: %u, best2 fc: %u",fcLens[i],fcCnts[i],fcLens[best1],fcLens[best2]);
        }
-       return;
+       if (fcLens[best1]==0) return 0;
+       uint8_t fcH=0, fcL=0;
+       if (fcLens[best1]>fcLens[best2]){
+               fcH=fcLens[best1];
+               fcL=fcLens[best2];
+       } else{
+               fcH=fcLens[best2];
+               fcL=fcLens[best1];
+       }
+       if ((size-180)/fcH/3 > fcCnts[best1]+fcCnts[best2]) {
+               if (g_debugMode==2) prnt("DEBUG countfc: fc is too large: %u > %u. Not psk or fsk",(size-180)/fcH/3,fcCnts[best1]+fcCnts[best2]);
+               return 0; //lots of waves not psk or fsk
+       }
+       // TODO: take top 3 answers and compare to known Field clocks to get top 2
+
+       uint16_t fcs = (((uint16_t)fcH)<<8) | fcL;
+       if (fskAdj) return fcs; 
+       return fcLens[best1];
 }
 
-//by marshmellow - demodulate PSK1 wave 
-//uses wave lengths (# Samples) 
-int pskRawDemod_ext(uint8_t dest[], size_t *size, int *clock, int *invert, int *startIdx) {
-       if (size == 0) return -1;
+//by marshmellow
+//detect psk clock by reading each phase shift
+// a phase shift is determined by measuring the sample length of each wave
+int DetectPSKClock_ext(uint8_t dest[], size_t size, int clock, int *firstPhaseShift) {
+       uint8_t clk[]={255,16,32,40,50,64,100,128,255}; //255 is not a valid clock
        uint16_t loopCnt = 4096;  //don't need to loop through entire array...
-       if (*size<loopCnt) loopCnt = *size;
-
-       size_t numBits=0;
-       uint8_t curPhase = *invert;
-       size_t i=0, waveStart=1, waveEnd=0, firstFullWave=0, lastClkBit=0;
-       uint16_t fc=0, fullWaveLen=0, tol=1;
-       uint16_t errCnt=0, waveLenCnt=0, errCnt2=0;
-       fc = countFC(dest, *size, 1);
-       uint8_t fc2 = fc >> 8;
-       if (fc2 == 10) return -1; //fsk found - quit
-       fc = fc & 0xFF;
-       if (fc!=2 && fc!=4 && fc!=8) return -1;
-       //PrintAndLog("DEBUG: FC: %d",fc);
-       *clock = DetectPSKClock(dest, *size, *clock);
-       if (*clock == 0) return -1;
+       if (size == 0) return 0;
+       if (size<loopCnt) loopCnt = size-20;
 
-       //find start of modulating data in trace 
-       uint8_t threshold_value = 123; //-5
-       i = findModStart(dest, *size, threshold_value, fc);
+       //if we already have a valid clock quit
+       size_t i=1;
+       for (; i < 8; ++i)
+               if (clk[i] == clock) return clock;
 
-       //find first phase shift
-       int avgWaveVal=0, lastAvgWaveVal=0;
-       waveStart = i;
-       for (; i<loopCnt; i++) {
-               // find peak 
-               if (dest[i]+fc < dest[i+1] && dest[i+1] >= dest[i+2]){
-                       waveEnd = i+1;
-                       if (g_debugMode == 2) prnt("DEBUG PSK: waveEnd: %u, waveStart: %u",waveEnd, waveStart);
-                       waveLenCnt = waveEnd-waveStart;
-                       if (waveLenCnt > fc && waveStart > fc && !(waveLenCnt > fc+3)){ //not first peak and is a large wave but not out of whack
-                               lastAvgWaveVal = avgWaveVal/(waveLenCnt);
-                               firstFullWave = waveStart;
-                               fullWaveLen=waveLenCnt;
-                               //if average wave value is > graph 0 then it is an up wave or a 1 (could cause inverting)
-                               if (lastAvgWaveVal > threshold_value) curPhase ^= 1;
-                               break;
-                       }
+       size_t waveStart=0, waveEnd=0, firstFullWave=0, lastClkBit=0;
+       uint8_t clkCnt, fc=0, fullWaveLen=0, tol=1;
+       uint16_t peakcnt=0, errCnt=0, waveLenCnt=0;
+       uint16_t bestErr[]={1000,1000,1000,1000,1000,1000,1000,1000,1000};
+       uint16_t peaksdet[]={0,0,0,0,0,0,0,0,0};
+       fc = countFC(dest, size, 0);
+       if (fc!=2 && fc!=4 && fc!=8) return -1;
+       if (g_debugMode==2) prnt("DEBUG PSK: FC: %d",fc);
 
-                       waveStart = i+1;
-                       avgWaveVal = 0;
-               }
-               avgWaveVal += dest[i+2];
-       }
-       if (firstFullWave == 0) {
-               // no phase shift detected - could be all 1's or 0's - doesn't matter where we start
-               // so skip a little to ensure we are past any Start Signal
-               firstFullWave = 160;
-               memset(dest, curPhase, firstFullWave / *clock);
-       } else {
-               memset(dest, curPhase^1, firstFullWave / *clock);
-       }
-       //advance bits
-       numBits += (firstFullWave / *clock);
-       *startIdx = firstFullWave - (*clock * numBits)+2;
-       //set start of wave as clock align
-       lastClkBit = firstFullWave;
-       if (g_debugMode==2) prnt("DEBUG PSK: firstFullWave: %u, waveLen: %u, startIdx %i",firstFullWave,fullWaveLen, *startIdx);
-       if (g_debugMode==2) prnt("DEBUG PSK: clk: %d, lastClkBit: %u, fc: %u", *clock, lastClkBit,(unsigned int) fc);
-       waveStart = 0;
-       dest[numBits++] = curPhase; //set first read bit
-       for (i = firstFullWave + fullWaveLen - 1; i < *size-3; i++){
-               //top edge of wave = start of new wave 
-               if (dest[i]+fc < dest[i+1] && dest[i+1] >= dest[i+2]){
+       //find first full wave
+       for (i=160; i<loopCnt; i++){
+               if (dest[i] < dest[i+1] && dest[i+1] >= dest[i+2]){
                        if (waveStart == 0) {
                                waveStart = i+1;
-                               waveLenCnt = 0;
-                               avgWaveVal = dest[i+1];
-                       } else { //waveEnd
+                               //prnt("DEBUG: waveStart: %d",waveStart);
+                       } else {
                                waveEnd = i+1;
+                               //prnt("DEBUG: waveEnd: %d",waveEnd);
                                waveLenCnt = waveEnd-waveStart;
-                               lastAvgWaveVal = avgWaveVal/waveLenCnt;
                                if (waveLenCnt > fc){
-                                       //PrintAndLog("DEBUG: avgWaveVal: %d, waveSum: %d",lastAvgWaveVal,avgWaveVal);
-                                       //this wave is a phase shift
-                                       //PrintAndLog("DEBUG: phase shift at: %d, len: %d, nextClk: %d, i: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+*clock-tol,i+1,fc);
-                                       if (i+1 >= lastClkBit + *clock - tol){ //should be a clock bit
-                                               curPhase ^= 1;
-                                               dest[numBits++] = curPhase;
-                                               lastClkBit += *clock;
-                                       } else if (i < lastClkBit+10+fc){
-                                               //noise after a phase shift - ignore
-                                       } else { //phase shift before supposed to based on clock
-                                               errCnt++;
-                                               dest[numBits++] = 7;
+                                       firstFullWave = waveStart;
+                                       fullWaveLen=waveLenCnt;
+                                       break;
+                               } 
+                               waveStart=0;
+                       }
+               }
+       }
+       *firstPhaseShift = firstFullWave;
+       if (g_debugMode ==2) prnt("DEBUG PSK: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen);
+       //test each valid clock from greatest to smallest to see which lines up
+       for(clkCnt=7; clkCnt >= 1 ; clkCnt--){
+               lastClkBit = firstFullWave; //set end of wave as clock align
+               waveStart = 0;
+               errCnt=0;
+               peakcnt=0;
+               if (g_debugMode == 2) prnt("DEBUG PSK: clk: %d, lastClkBit: %d",clk[clkCnt],lastClkBit);
+
+               for (i = firstFullWave+fullWaveLen-1; i < loopCnt-2; i++){
+                       //top edge of wave = start of new wave 
+                       if (dest[i] < dest[i+1] && dest[i+1] >= dest[i+2]){
+                               if (waveStart == 0) {
+                                       waveStart = i+1;
+                                       waveLenCnt=0;
+                               } else { //waveEnd
+                                       waveEnd = i+1;
+                                       waveLenCnt = waveEnd-waveStart;
+                                       if (waveLenCnt > fc){ 
+                                               //if this wave is a phase shift
+                                               if (g_debugMode == 2) prnt("DEBUG PSK: phase shift at: %d, len: %d, nextClk: %d, i: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+clk[clkCnt]-tol,i+1,fc);
+                                               if (i+1 >= lastClkBit + clk[clkCnt] - tol){ //should be a clock bit
+                                                       peakcnt++;
+                                                       lastClkBit+=clk[clkCnt];
+                                               } else if (i<lastClkBit+8){
+                                                       //noise after a phase shift - ignore
+                                               } else { //phase shift before supposed to based on clock
+                                                       errCnt++;
+                                               }
+                                       } else if (i+1 > lastClkBit + clk[clkCnt] + tol + fc){
+                                               lastClkBit+=clk[clkCnt]; //no phase shift but clock bit
                                        }
-                               } else if (i+1 > lastClkBit + *clock + tol + fc){
-                                       lastClkBit += *clock; //no phase shift but clock bit
-                                       dest[numBits++] = curPhase;
-                               } else if (waveLenCnt < fc - 1) { //wave is smaller than field clock (shouldn't happen often)
-                                       errCnt2++;
-                                       if(errCnt2 > 101) return errCnt2;
+                                       waveStart=i+1;
                                }
-                               avgWaveVal = 0;
-                               waveStart = i+1;
                        }
                }
-               avgWaveVal += dest[i+1];
+               if (errCnt == 0){
+                       return clk[clkCnt];
+               }
+               if (errCnt <= bestErr[clkCnt]) bestErr[clkCnt]=errCnt;
+               if (peakcnt > peaksdet[clkCnt]) peaksdet[clkCnt]=peakcnt;
+       } 
+       //all tested with errors 
+       //return the highest clk with the most peaks found
+       uint8_t best=7;
+       for (i=7; i>=1; i--){
+               if (peaksdet[i] > peaksdet[best]) {
+                       best = i;
+               }
+               if (g_debugMode == 2) prnt("DEBUG PSK: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[i],peaksdet[i],bestErr[i],clk[best]);
        }
-       *size = numBits;
-       return errCnt;
+       return clk[best];
 }
 
-int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert) {
-       int startIdx = 0;
-       return pskRawDemod_ext(dest, size, clock, invert, &startIdx);
+int DetectPSKClock(uint8_t dest[], size_t size, int clock) {
+       int firstPhaseShift = 0;
+       return DetectPSKClock_ext(dest, size, clock, &firstPhaseShift);
 }
 
-//-------------------Clock / Bitrate Detection Section------------------------------------------------------------------------------------
+//by marshmellow
+//detects the bit clock for FSK given the high and low Field Clocks
+uint8_t detectFSKClk_ext(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fcLow, int *firstClockEdge) {
+       uint8_t clk[] = {8,16,32,40,50,64,100,128,0};
+       uint16_t rfLens[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+       uint8_t rfCnts[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+       uint8_t rfLensFnd = 0;
+       uint8_t lastFCcnt = 0;
+       uint16_t fcCounter = 0;
+       uint16_t rfCounter = 0;
+       uint8_t firstBitFnd = 0;
+       size_t i;
+       if (size == 0) return 0;
+
+       uint8_t fcTol = ((fcHigh*100 - fcLow*100)/2 + 50)/100; //(uint8_t)(0.5+(float)(fcHigh-fcLow)/2);
+       rfLensFnd=0;
+       fcCounter=0;
+       rfCounter=0;
+       firstBitFnd=0;
+       //PrintAndLog("DEBUG: fcTol: %d",fcTol);
+       // prime i to first peak / up transition
+       for (i = 160; i < size-20; i++)
+               if (BitStream[i] > BitStream[i-1] && BitStream[i]>=BitStream[i+1])
+                       break;
 
-// by marshmellow
-// to help detect clocks on heavily clipped samples
-// based on count of low to low
-int DetectStrongAskClock(uint8_t dest[], size_t size, uint8_t high, uint8_t low, int *clock) {
-       uint8_t fndClk[] = {8,16,32,40,50,64,128};
-       size_t startwave;
-       size_t i = 100;
-       size_t minClk = 255;
-       int shortestWaveIdx = 0;
-               // get to first full low to prime loop and skip incomplete first pulse
-       while ((dest[i] < high) && (i < size))
-               ++i;
-       while ((dest[i] > low) && (i < size))
-               ++i;
+       for (; i < size-20; i++){
+               fcCounter++;
+               rfCounter++;
 
-       // loop through all samples
-       while (i < size) {
-               // measure from low to low
-               while ((dest[i] > low) && (i < size))
-                       ++i;
-               startwave = i;
-               while ((dest[i] < high) && (i < size))
-                       ++i;
-               while ((dest[i] > low) && (i < size))
-                       ++i;
-               //get minimum measured distance
-               if (i-startwave < minClk && i < size) {
-                       minClk = i - startwave;
-                       shortestWaveIdx = startwave;
-               }
-       }
-       // set clock
-       if (g_debugMode==2) prnt("DEBUG ASK: detectstrongASKclk smallest wave: %d",minClk);
-       for (uint8_t clkCnt = 0; clkCnt<7; clkCnt++) {
-               if (minClk >= fndClk[clkCnt]-(fndClk[clkCnt]/8) && minClk <= fndClk[clkCnt]+1) {
-                       *clock = fndClk[clkCnt];
-                       return shortestWaveIdx;
+               if (BitStream[i] <= BitStream[i-1] || BitStream[i] < BitStream[i+1]) 
+                       continue;               
+               // else new peak 
+               // if we got less than the small fc + tolerance then set it to the small fc
+               // if it is inbetween set it to the last counter
+               if (fcCounter < fcHigh && fcCounter > fcLow)
+                       fcCounter = lastFCcnt;
+               else if (fcCounter < fcLow+fcTol) 
+                       fcCounter = fcLow;
+               else //set it to the large fc
+                       fcCounter = fcHigh;
+
+               //look for bit clock  (rf/xx)
+               if ((fcCounter < lastFCcnt || fcCounter > lastFCcnt)){
+                       //not the same size as the last wave - start of new bit sequence
+                       if (firstBitFnd > 1){ //skip first wave change - probably not a complete bit
+                               for (int ii=0; ii<15; ii++){
+                                       if (rfLens[ii] >= (rfCounter-4) && rfLens[ii] <= (rfCounter+4)){
+                                               rfCnts[ii]++;
+                                               rfCounter = 0;
+                                               break;
+                                       }
+                               }
+                               if (rfCounter > 0 && rfLensFnd < 15){
+                                       //PrintAndLog("DEBUG: rfCntr %d, fcCntr %d",rfCounter,fcCounter);
+                                       rfCnts[rfLensFnd]++;
+                                       rfLens[rfLensFnd++] = rfCounter;
+                               }
+                       } else {
+                               *firstClockEdge = i;
+                               firstBitFnd++;
+                       }
+                       rfCounter=0;
+                       lastFCcnt=fcCounter;
                }
+               fcCounter=0;
        }
-       return 0;
-}
-
-// by marshmellow
-// not perfect especially with lower clocks or VERY good antennas (heavy wave clipping)
-// maybe somehow adjust peak trimming value based on samples to fix?
-// return start index of best starting position for that clock and return clock (by reference)
-int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr) {
-       size_t i=1;
-       uint8_t clk[] = {255,8,16,32,40,50,64,100,128,255};
-       uint8_t clkEnd = 9;
-       uint8_t loopCnt = 255;  //don't need to loop through entire array...
-       if (size <= loopCnt+60) return -1; //not enough samples
-       size -= 60; //sometimes there is a strange end wave - filter out this....
-       //if we already have a valid clock
-       uint8_t clockFnd=0;
-       for (;i<clkEnd;++i)
-               if (clk[i] == *clock) clockFnd = i;
-               //clock found but continue to find best startpos
+       uint8_t rfHighest=15, rfHighest2=15, rfHighest3=15;
 
-       //get high and low peak
-       int peak, low;
-       if (getHiLo(dest, loopCnt, &peak, &low, 75, 75) < 1) return -1;
+       for (i=0; i<15; i++){
+               //get highest 2 RF values  (might need to get more values to compare or compare all?)
+               if (rfCnts[i]>rfCnts[rfHighest]){
+                       rfHighest3=rfHighest2;
+                       rfHighest2=rfHighest;
+                       rfHighest=i;
+               } else if(rfCnts[i]>rfCnts[rfHighest2]){
+                       rfHighest3=rfHighest2;
+                       rfHighest2=i;
+               } else if(rfCnts[i]>rfCnts[rfHighest3]){
+                       rfHighest3=i;
+               }
+               if (g_debugMode==2) prnt("DEBUG FSK: RF %d, cnts %d",rfLens[i], rfCnts[i]);
+       }  
+       // set allowed clock remainder tolerance to be 1 large field clock length+1 
+       //   we could have mistakenly made a 9 a 10 instead of an 8 or visa versa so rfLens could be 1 FC off  
+       uint8_t tol1 = fcHigh+1; 
        
-       //test for large clean peaks
-       if (!clockFnd){
-               if (DetectCleanAskWave(dest, size, peak, low)==1){
-                       int ans = DetectStrongAskClock(dest, size, peak, low, clock);
-                       if (g_debugMode==2) prnt("DEBUG ASK: detectaskclk Clean Ask Wave Detected: clk %i, ShortestWave: %i",clock, ans);
-                       if (ans > 0) {
-                               return ans; //return shortest wave start position
+       if (g_debugMode==2) prnt("DEBUG FSK: most counted rf values: 1 %d, 2 %d, 3 %d",rfLens[rfHighest],rfLens[rfHighest2],rfLens[rfHighest3]);
+
+       // loop to find the highest clock that has a remainder less than the tolerance
+       //   compare samples counted divided by
+       // test 128 down to 32 (shouldn't be possible to have fc/10 & fc/8 and rf/16 or less)
+       int ii=7;
+       for (; ii>=2; ii--){
+               if (rfLens[rfHighest] % clk[ii] < tol1 || rfLens[rfHighest] % clk[ii] > clk[ii]-tol1){
+                       if (rfLens[rfHighest2] % clk[ii] < tol1 || rfLens[rfHighest2] % clk[ii] > clk[ii]-tol1){
+                               if (rfLens[rfHighest3] % clk[ii] < tol1 || rfLens[rfHighest3] % clk[ii] > clk[ii]-tol1){
+                                       if (g_debugMode==2) prnt("DEBUG FSK: clk %d divides into the 3 most rf values within tolerance",clk[ii]);
+                                       break;
+                               }
                        }
                }
        }
-       uint8_t ii;
-       uint8_t clkCnt, tol = 0;
-       uint16_t bestErr[]={1000,1000,1000,1000,1000,1000,1000,1000,1000};
-       uint8_t bestStart[]={0,0,0,0,0,0,0,0,0};
-       size_t errCnt = 0;
-       size_t arrLoc, loopEnd;
 
-       if (clockFnd>0) {
-               clkCnt = clockFnd;
-               clkEnd = clockFnd+1;
-       }
-       else clkCnt=1;
+       if (ii<2) return 0; // oops we went too far
 
-       //test each valid clock from smallest to greatest to see which lines up
-       for(; clkCnt < clkEnd; clkCnt++){
-               if (clk[clkCnt] <= 32){
-                       tol=1;
-               }else{
-                       tol=0;
-               }
-               //if no errors allowed - keep start within the first clock
-               if (!maxErr && size > clk[clkCnt]*2 + tol && clk[clkCnt]<128) loopCnt=clk[clkCnt]*2;
-               bestErr[clkCnt]=1000;
-               //try lining up the peaks by moving starting point (try first few clocks)
-               for (ii=0; ii < loopCnt; ii++){
-                       if (dest[ii] < peak && dest[ii] > low) continue;
+       return clk[ii];
+}
 
-                       errCnt=0;
-                       // now that we have the first one lined up test rest of wave array
-                       loopEnd = ((size-ii-tol) / clk[clkCnt]) - 1;
-                       for (i=0; i < loopEnd; ++i){
-                               arrLoc = ii + (i * clk[clkCnt]);
-                               if (dest[arrLoc] >= peak || dest[arrLoc] <= low){
-                               }else if (dest[arrLoc-tol] >= peak || dest[arrLoc-tol] <= low){
-                               }else if (dest[arrLoc+tol] >= peak || dest[arrLoc+tol] <= low){
-                               }else{  //error no peak detected
-                                       errCnt++;
+uint8_t        detectFSKClk(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fcLow) {
+       int firstClockEdge = 0;
+       return detectFSKClk_ext(BitStream, size, fcHigh, fcLow, &firstClockEdge);
+}
+
+//**********************************************************************************************
+//--------------------Modulation Demods &/or Decoding Section-----------------------------------
+//**********************************************************************************************
+
+// look for Sequence Terminator - should be pulses of clk*(1 or 2), clk*2, clk*(1.5 or 2), by idx we mean graph position index...
+bool findST(int *stStopLoc, int *stStartIdx, int lowToLowWaveLen[], int highToLowWaveLen[], int clk, int tol, int buffSize, size_t *i) {
+       for (; *i < buffSize - 4; *i+=1) {
+               *stStartIdx += lowToLowWaveLen[*i]; //caution part of this wave may be data and part may be ST....  to be accounted for in main function for now...
+               if (lowToLowWaveLen[*i] >= clk*1-tol && lowToLowWaveLen[*i] <= (clk*2)+tol && highToLowWaveLen[*i] < clk+tol) {           //1 to 2 clocks depending on 2 bits prior
+                       if (lowToLowWaveLen[*i+1] >= clk*2-tol && lowToLowWaveLen[*i+1] <= clk*2+tol && highToLowWaveLen[*i+1] > clk*3/2-tol) {       //2 clocks and wave size is 1 1/2
+                               if (lowToLowWaveLen[*i+2] >= (clk*3)/2-tol && lowToLowWaveLen[*i+2] <= clk*2+tol && highToLowWaveLen[*i+2] > clk-tol) { //1 1/2 to 2 clocks and at least one full clock wave
+                                       if (lowToLowWaveLen[*i+3] >= clk*1-tol && lowToLowWaveLen[*i+3] <= clk*2+tol) { //1 to 2 clocks for end of ST + first bit
+                                               *stStopLoc = *i + 3;
+                                               return true;
+                                       }
                                }
                        }
-                       //if we found no errors then we can stop here and a low clock (common clocks)
-                       //  this is correct one - return this clock
-                       if (g_debugMode == 2) prnt("DEBUG ASK: clk %d, err %d, startpos %d, endpos %d",clk[clkCnt],errCnt,ii,i);
-                       if(errCnt==0 && clkCnt<7) { 
-                               if (!clockFnd) *clock = clk[clkCnt];
-                               return ii;
-                       }
-                       //if we found errors see if it is lowest so far and save it as best run
-                       if(errCnt<bestErr[clkCnt]){
-                               bestErr[clkCnt]=errCnt;
-                               bestStart[clkCnt]=ii;
+               }
+       }
+       return false;
+}
+//by marshmellow
+//attempt to identify a Sequence Terminator in ASK modulated raw wave
+bool DetectST_ext(uint8_t buffer[], size_t *size, int *foundclock, size_t *ststart, size_t *stend) {
+       size_t bufsize = *size;
+       //need to loop through all samples and identify our clock, look for the ST pattern
+       int clk = 0; 
+       int tol = 0;
+       int j, high, low, skip, start, end, minClk=255;
+       size_t i = 0;
+       //probably should malloc... || test if memory is available ... handle device side? memory danger!!! [marshmellow]
+       int tmpbuff[bufsize / LOWEST_DEFAULT_CLOCK]; // low to low wave count //guess rf/32 clock, if click is smaller we will only have room for a fraction of the samples captured
+       int waveLen[bufsize / LOWEST_DEFAULT_CLOCK]; // high to low wave count //if clock is larger then we waste memory in array size that is not needed...
+       //size_t testsize = (bufsize < 512) ? bufsize : 512;
+       int phaseoff = 0;
+       high = low = 128;
+       memset(tmpbuff, 0, sizeof(tmpbuff));
+       memset(waveLen, 0, sizeof(waveLen));
+
+       if (!loadWaveCounters(buffer, bufsize, tmpbuff, waveLen, &j, &skip, &minClk, &high, &low)) return false;
+       // set clock  - might be able to get this externally and remove this work...
+       clk = getClosestClock(minClk);
+       // clock not found - ERROR
+       if (clk == 0) {
+               if (g_debugMode==2) prnt("DEBUG STT: clock not found - quitting");
+               return false;
+       }
+       *foundclock = clk;
+
+       tol = clk/8;
+       if (!findST(&start, &skip, tmpbuff, waveLen, clk, tol, j, &i)) {
+               // first ST not found - ERROR
+               if (g_debugMode==2) prnt("DEBUG STT: first STT not found - quitting");
+               return false;
+       } else {
+               if (g_debugMode==2) prnt("DEBUG STT: first STT found at wave: %i, skip: %i, j=%i", start, skip, j);
+       }
+       if (waveLen[i+2] > clk*1+tol)
+               phaseoff = 0;
+       else
+               phaseoff = clk/2;
+       
+       // skip over the remainder of ST
+       skip += clk*7/2; //3.5 clocks from tmpbuff[i] = end of st - also aligns for ending point
+
+       // now do it again to find the end
+       int dummy1 = 0;
+       end = skip;
+       i+=3;
+       if (!findST(&dummy1, &end, tmpbuff, waveLen, clk, tol, j, &i)) {
+               //didn't find second ST - ERROR
+               if (g_debugMode==2) prnt("DEBUG STT: second STT not found - quitting");
+               return false;
+       }
+       end -= phaseoff;
+       if (g_debugMode==2) prnt("DEBUG STT: start of data: %d end of data: %d, datalen: %d, clk: %d, bits: %d, phaseoff: %d", skip, end, end-skip, clk, (end-skip)/clk, phaseoff);
+       //now begin to trim out ST so we can use normal demod cmds
+       start = skip;
+       size_t datalen = end - start;
+       // check validity of datalen (should be even clock increments)  - use a tolerance of up to 1/8th a clock
+       if ( clk - (datalen % clk) <= clk/8) {
+               // padd the amount off - could be problematic...  but shouldn't happen often
+               datalen += clk - (datalen % clk);
+       } else if ( (datalen % clk) <= clk/8 ) {
+               // padd the amount off - could be problematic...  but shouldn't happen often
+               datalen -= datalen % clk;
+       } else {
+               if (g_debugMode==2) prnt("DEBUG STT: datalen not divisible by clk: %u %% %d = %d - quitting", datalen, clk, datalen % clk);
+               return false;
+       }
+       // if datalen is less than one t55xx block - ERROR
+       if (datalen/clk < 8*4) {
+               if (g_debugMode==2) prnt("DEBUG STT: datalen is less than 1 full t55xx block - quitting");              
+               return false;
+       }
+       size_t dataloc = start;
+       if (buffer[dataloc-(clk*4)-(clk/8)] <= low && buffer[dataloc] <= low && buffer[dataloc-(clk*4)] >= high) {
+               //we have low drift (and a low just before the ST and a low just after the ST) - compensate by backing up the start 
+               for ( i=0; i <= (clk/8); ++i ) {
+                       if ( buffer[dataloc - (clk*4) - i] <= low ) {
+                               dataloc -= i;
+                               break;
                        }
                }
        }
-       uint8_t iii;
-       uint8_t best=0;
-       for (iii=1; iii<clkEnd; ++iii){
-               if (bestErr[iii] < bestErr[best]){
-                       if (bestErr[iii] == 0) bestErr[iii]=1;
-                       // current best bit to error ratio     vs  new bit to error ratio
-                       if ( (size/clk[best])/bestErr[best] < (size/clk[iii])/bestErr[iii] ){
-                               best = iii;
+       
+       size_t newloc = 0;
+       i=0;
+       if (g_debugMode==2) prnt("DEBUG STT: Starting STT trim - start: %d, datalen: %d ",dataloc, datalen);            
+       bool firstrun = true;
+       // warning - overwriting buffer given with raw wave data with ST removed...
+       while ( dataloc < bufsize-(clk/2) ) {
+               //compensate for long high at end of ST not being high due to signal loss... (and we cut out the start of wave high part)
+               if (buffer[dataloc]<high && buffer[dataloc]>low && buffer[dataloc+3]<high && buffer[dataloc+3]>low) {
+                       for(i=0; i < clk/2-tol; ++i) {
+                               buffer[dataloc+i] = high+5;
+                       }
+               } //test for single sample outlier (high between two lows) in the case of very strong waves
+               if (buffer[dataloc] >= high && buffer[dataloc+2] <= low) {
+                       buffer[dataloc] = buffer[dataloc+2];
+                       buffer[dataloc+1] = buffer[dataloc+2];
+               }
+               if (firstrun) {
+                       *stend = dataloc;
+                       *ststart = dataloc-(clk*4);
+                       firstrun=false;
+               }
+               for (i=0; i<datalen; ++i) {
+                       if (i+newloc < bufsize) {
+                               if (i+newloc < dataloc)
+                                       buffer[i+newloc] = buffer[dataloc];
+
+                               dataloc++;
                        }
                }
-               if (g_debugMode == 2) prnt("DEBUG ASK: clk %d, # Errors %d, Current Best Clk %d, bestStart %d",clk[iii],bestErr[iii],clk[best],bestStart[best]);
+               newloc += i;
+               //skip next ST  -  we just assume it will be there from now on...
+               if (g_debugMode==2) prnt("DEBUG STT: skipping STT at %d to %d", dataloc, dataloc+(clk*4));
+               dataloc += clk*4;
        }
-       if (!clockFnd) *clock = clk[best];
-       return bestStart[best];
+       *size = newloc;
+       return true;
+}
+bool DetectST(uint8_t  buffer[], size_t *size, int *foundclock) {
+       size_t ststart = 0, stend = 0;
+       return DetectST_ext(buffer, size, foundclock, &ststart, &stend);
 }
 
-int DetectStrongNRZClk(uint8_t *dest, size_t size, int peak, int low){
-       //find shortest transition from high to low
-       size_t i = 0;
-       size_t transition1 = 0;
-       int lowestTransition = 255;
-       bool lastWasHigh = false;
-
-       //find first valid beginning of a high or low wave
-       while ((dest[i] >= peak || dest[i] <= low) && (i < size))
-               ++i;
-       while ((dest[i] < peak && dest[i] > low) && (i < size))
-               ++i;
-       lastWasHigh = (dest[i] >= peak);
+//by marshmellow
+//take 11 10 01 11 00 and make 01100 ... miller decoding 
+//check for phase errors - should never have half a 1 or 0 by itself and should never exceed 1111 or 0000 in a row
+//decodes miller encoded binary
+//NOTE  askrawdemod will NOT demod miller encoded ask unless the clock is manually set to 1/2 what it is detected as!
+int millerRawDecode(uint8_t *BitStream, size_t *size, int invert) {
+       if (*size < 16) return -1;
+       uint16_t MaxBits = 512, errCnt = 0;
+       size_t i, bitCnt=0;
+       uint8_t alignCnt = 0, curBit = BitStream[0], alignedIdx = 0;
+       uint8_t halfClkErr = 0;
+       //find alignment, needs 4 1s or 0s to properly align
+       for (i=1; i < *size-1; i++) {
+               alignCnt = (BitStream[i] == curBit) ? alignCnt+1 : 0;
+               curBit = BitStream[i];
+               if (alignCnt == 4) break;
+       }
+       // for now error if alignment not found.  later add option to run it with multiple offsets...
+       if (alignCnt != 4) {
+               if (g_debugMode) prnt("ERROR MillerDecode: alignment not found so either your bitstream is not miller or your data does not have a 101 in it");
+               return -1;
+       }
+       alignedIdx = (i-1) % 2;
+       for (i=alignedIdx; i < *size-3; i+=2) {
+               halfClkErr = (uint8_t)((halfClkErr << 1 | BitStream[i]) & 0xFF);
+               if ( (halfClkErr & 0x7) == 5 || (halfClkErr & 0x7) == 2 || (i > 2 && (halfClkErr & 0x7) == 0) || (halfClkErr & 0x1F) == 0x1F) {
+                       errCnt++;
+                       BitStream[bitCnt++] = 7;
+                       continue;
+               }
+               BitStream[bitCnt++] = BitStream[i] ^ BitStream[i+1] ^ invert;
 
-       if (i==size) return 0;
-       transition1 = i;
+               if (bitCnt > MaxBits) break;
+       }
+       *size = bitCnt;
+       return errCnt;
+}
 
-       for (;i < size; i++) {
-               if ((dest[i] >= peak && !lastWasHigh) || (dest[i] <= low && lastWasHigh)) {
-                       lastWasHigh = (dest[i] >= peak);
-                       if (i-transition1 < lowestTransition) lowestTransition = i-transition1;
-                       transition1 = i;
+//by marshmellow
+//take 01 or 10 = 1 and 11 or 00 = 0
+//check for phase errors - should never have 111 or 000 should be 01001011 or 10110100 for 1010
+//decodes biphase or if inverted it is AKA conditional dephase encoding AKA differential manchester encoding
+int BiphaseRawDecode(uint8_t *BitStream, size_t *size, int offset, int invert) {
+       uint16_t bitnum = 0;
+       uint16_t errCnt = 0;
+       size_t i = offset;
+       uint16_t MaxBits=512;
+       //if not enough samples - error
+       if (*size < 51) return -1;
+       //check for phase change faults - skip one sample if faulty
+       uint8_t offsetA = 1, offsetB = 1;
+       for (; i<48; i+=2){
+               if (BitStream[i+1]==BitStream[i+2]) offsetA=0; 
+               if (BitStream[i+2]==BitStream[i+3]) offsetB=0;                                  
+       }
+       if (!offsetA && offsetB) offset++;
+       for (i=offset; i<*size-3; i+=2){
+               //check for phase error
+               if (BitStream[i+1]==BitStream[i+2]) {
+                       BitStream[bitnum++]=7;
+                       errCnt++;
+               }
+               if((BitStream[i]==1 && BitStream[i+1]==0) || (BitStream[i]==0 && BitStream[i+1]==1)){
+                       BitStream[bitnum++]=1^invert;
+               } else if((BitStream[i]==0 && BitStream[i+1]==0) || (BitStream[i]==1 && BitStream[i+1]==1)){
+                       BitStream[bitnum++]=invert;
+               } else {
+                       BitStream[bitnum++]=7;
+                       errCnt++;
                }
+               if(bitnum>MaxBits) break;
        }
-       if (lowestTransition == 255) lowestTransition = 0;
-       if (g_debugMode==2) prnt("DEBUG NRZ: detectstrongNRZclk smallest wave: %d",lowestTransition);
-       return lowestTransition;
+       *size=bitnum;
+       return errCnt;
 }
 
 //by marshmellow
-//detect nrz clock by reading #peaks vs no peaks(or errors)
-int DetectNRZClock_ext(uint8_t dest[], size_t size, int clock, size_t *clockStartIdx) {
-       size_t i=0;
-       uint8_t clk[]={8,16,32,40,50,64,100,128,255};
-       size_t loopCnt = 4096;  //don't need to loop through entire array...
-       if (size == 0) return 0;
-       if (size<loopCnt) loopCnt = size-20;
-       //if we already have a valid clock quit
-       for (; i < 8; ++i)
-               if (clk[i] == clock) return clock;
-
-       //get high and low peak
-       int peak, low;
-       if (getHiLo(dest, loopCnt, &peak, &low, 75, 75) < 1) return 0;
+//take 10 and 01 and manchester decode
+//run through 2 times and take least errCnt
+int manrawdecode(uint8_t * BitStream, size_t *size, uint8_t invert, uint8_t *alignPos) {
+       uint16_t bitnum=0, MaxBits = 512, errCnt = 0;
+       size_t i, ii;
+       uint16_t bestErr = 1000, bestRun = 0;
+       if (*size < 16) return -1;
+       //find correct start position [alignment]
+       for (ii=0;ii<2;++ii){
+               for (i=ii; i<*size-3; i+=2)
+                       if (BitStream[i]==BitStream[i+1])
+                               errCnt++;
 
-       int lowestTransition = DetectStrongNRZClk(dest, size-20, peak, low);
-       size_t ii;
-       uint8_t clkCnt;
-       uint8_t tol = 0;
-       uint16_t smplCnt = 0;
-       int16_t peakcnt = 0;
-       int16_t peaksdet[] = {0,0,0,0,0,0,0,0};
-       uint16_t maxPeak = 255;
-       bool firstpeak = false;
-       //test for large clipped waves
-       for (i=0; i<loopCnt; i++){
-               if (dest[i] >= peak || dest[i] <= low){
-                       if (!firstpeak) continue;
-                       smplCnt++;
+               if (bestErr>errCnt){
+                       bestErr=errCnt;
+                       bestRun=ii;
+               }
+               errCnt=0;
+       }
+       *alignPos=bestRun;
+       //decode
+       for (i=bestRun; i < *size-3; i+=2){
+               if(BitStream[i] == 1 && (BitStream[i+1] == 0)){
+                       BitStream[bitnum++]=invert;
+               } else if((BitStream[i] == 0) && BitStream[i+1] == 1){
+                       BitStream[bitnum++]=invert^1;
                } else {
-                       firstpeak=true;
-                       if (smplCnt > 6 ){
-                               if (maxPeak > smplCnt){
-                                       maxPeak = smplCnt;
-                                       //prnt("maxPk: %d",maxPeak);
-                               }
-                               peakcnt++;
-                               //prnt("maxPk: %d, smplCnt: %d, peakcnt: %d",maxPeak,smplCnt,peakcnt);
-                               smplCnt=0;
-                       }
+                       BitStream[bitnum++]=7;
                }
+               if(bitnum>MaxBits) break;
        }
-       bool errBitHigh = 0;
-       bool bitHigh = 0;
-       uint8_t ignoreCnt = 0;
-       uint8_t ignoreWindow = 4;
-       bool lastPeakHigh = 0;
-       int lastBit = 0; 
-       size_t bestStart[]={0,0,0,0,0,0,0,0,0};
-       peakcnt=0;
-       //test each valid clock from smallest to greatest to see which lines up
-       for(clkCnt=0; clkCnt < 8; ++clkCnt){
-               //ignore clocks smaller than smallest peak
-               if (clk[clkCnt] < maxPeak - (clk[clkCnt]/4)) continue;
-               //try lining up the peaks by moving starting point (try first 256)
-               for (ii=20; ii < loopCnt; ++ii){
-                       if ((dest[ii] >= peak) || (dest[ii] <= low)){
-                               peakcnt = 0;
-                               bitHigh = false;
-                               ignoreCnt = 0;
-                               lastBit = ii-clk[clkCnt]; 
-                               //loop through to see if this start location works
-                               for (i = ii; i < size-20; ++i) {
-                                       //if we are at a clock bit
-                                       if ((i >= lastBit + clk[clkCnt] - tol) && (i <= lastBit + clk[clkCnt] + tol)) {
-                                               //test high/low
-                                               if (dest[i] >= peak || dest[i] <= low) {
-                                                       //if same peak don't count it
-                                                       if ((dest[i] >= peak && !lastPeakHigh) || (dest[i] <= low && lastPeakHigh)) {
-                                                               peakcnt++;
-                                                       }
-                                                       lastPeakHigh = (dest[i] >= peak);
-                                                       bitHigh = true;
-                                                       errBitHigh = false;
-                                                       ignoreCnt = ignoreWindow;
-                                                       lastBit += clk[clkCnt];
-                                               } else if (i == lastBit + clk[clkCnt] + tol) {
-                                                       lastBit += clk[clkCnt];
-                                               }
-                                       //else if not a clock bit and no peaks
-                                       } else if (dest[i] < peak && dest[i] > low){
-                                               if (ignoreCnt==0){
-                                                       bitHigh=false;
-                                                       if (errBitHigh==true) peakcnt--;
-                                                       errBitHigh=false;
-                                               } else {
-                                                       ignoreCnt--;
-                                               }
-                                               // else if not a clock bit but we have a peak
-                                       } else if ((dest[i]>=peak || dest[i]<=low) && (!bitHigh)) {
-                                               //error bar found no clock...
-                                               errBitHigh=true;
+       *size=bitnum;
+       return bestErr;
+}
+
+//by marshmellow
+//demodulates strong heavily clipped samples
+int cleanAskRawDemod(uint8_t *BinStream, size_t *size, int clk, int invert, int high, int low, int *startIdx)
+{
+       *startIdx=0;
+       size_t bitCnt=0, smplCnt=1, errCnt=0;
+       bool waveHigh = (BinStream[0] >= high);
+       for (size_t i=1; i < *size; i++){
+               if (BinStream[i] >= high && waveHigh){
+                       smplCnt++;
+               } else if (BinStream[i] <= low && !waveHigh){
+                       smplCnt++;
+               } else { //transition
+                       if ((BinStream[i] >= high && !waveHigh) || (BinStream[i] <= low && waveHigh)){
+                               if (smplCnt > clk-(clk/4)-1) { //full clock
+                                       if (smplCnt > clk + (clk/4)+1) { //too many samples
+                                               errCnt++;
+                                               if (g_debugMode==2) prnt("DEBUG ASK: Modulation Error at: %u", i);
+                                               BinStream[bitCnt++] = 7;
+                                       } else if (waveHigh) {
+                                               BinStream[bitCnt++] = invert;
+                                               BinStream[bitCnt++] = invert;
+                                       } else if (!waveHigh) {
+                                               BinStream[bitCnt++] = invert ^ 1;
+                                               BinStream[bitCnt++] = invert ^ 1;
                                        }
+                                       if (*startIdx==0) *startIdx = i-clk;
+                                       waveHigh = !waveHigh;  
+                                       smplCnt = 0;
+                               } else if (smplCnt > (clk/2) - (clk/4)-1) { //half clock
+                                       if (waveHigh) {
+                                               BinStream[bitCnt++] = invert;
+                                       } else if (!waveHigh) {
+                                               BinStream[bitCnt++] = invert ^ 1;
+                                       }
+                                       if (*startIdx==0) *startIdx = i-(clk/2);
+                                       waveHigh = !waveHigh;  
+                                       smplCnt = 0;
+                               } else {
+                                       smplCnt++;
+                                       //transition bit oops
                                }
-                               if(peakcnt>peaksdet[clkCnt]) {
-                                       bestStart[clkCnt]=ii;
-                                       peaksdet[clkCnt]=peakcnt;
-                               }
-                       }
-               }
-       }
-       int iii=7;
-       uint8_t best=0;
-       for (iii=7; iii > 0; iii--){
-               if ((peaksdet[iii] >= (peaksdet[best]-1)) && (peaksdet[iii] <= peaksdet[best]+1) && lowestTransition) {
-                       if (clk[iii] > (lowestTransition - (clk[iii]/8)) && clk[iii] < (lowestTransition + (clk[iii]/8))) {
-                               best = iii;
+                       } else { //haven't hit new high or new low yet
+                               smplCnt++;
                        }
-               } else if (peaksdet[iii] > peaksdet[best]){
-                       best = iii;
                }
-               if (g_debugMode==2) prnt("DEBUG NRZ: Clk: %d, peaks: %d, maxPeak: %d, bestClk: %d, lowestTrs: %d",clk[iii],peaksdet[iii],maxPeak, clk[best], lowestTransition);
        }
-       *clockStartIdx  = bestStart[best];
-       return clk[best];
-}
-
-int DetectNRZClock(uint8_t dest[], size_t size, int clock) {
-       size_t bestStart=0;
-       return DetectNRZClock_ext(dest, size, clock, &bestStart);
+       *size = bitCnt;
+       return errCnt;
 }
 
 //by marshmellow
-//countFC is to detect the field clock lengths.
-//counts and returns the 2 most common wave lengths
-//mainly used for FSK field clock detection
-uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj) {
-       uint8_t fcLens[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-       uint16_t fcCnts[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-       uint8_t fcLensFnd = 0;
-       uint8_t lastFCcnt = 0;
-       uint8_t fcCounter = 0;
-       size_t i;
-       if (size < 180) return 0;
+//attempts to demodulate ask modulations, askType == 0 for ask/raw, askType==1 for ask/manchester
+int askdemod_ext(uint8_t *BinStream, size_t *size, int *clk, int *invert, int maxErr, uint8_t amp, uint8_t askType, int *startIdx) {
+       if (*size==0) return -1;
+       int start = DetectASKClock(BinStream, *size, clk, maxErr); //clock default
+       if (*clk==0 || start < 0) return -3;
+       if (*invert != 1) *invert = 0;
+       if (amp==1) askAmp(BinStream, *size);
+       if (g_debugMode==2) prnt("DEBUG ASK: clk %d, beststart %d, amp %d", *clk, start, amp);
 
-       // prime i to first up transition
-       for (i = 160; i < size-20; i++)
-               if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1])
-                       break;
+       //start pos from detect ask clock is 1/2 clock offset
+       // NOTE: can be negative (demod assumes rest of wave was there)
+       *startIdx = start - (*clk/2); 
+       uint8_t initLoopMax = 255;
+       if (initLoopMax > *size) initLoopMax = *size;
+       // Detect high and lows
+       //25% clip in case highs and lows aren't clipped [marshmellow]
+       int high, low;
+       if (getHiLo(BinStream, initLoopMax, &high, &low, 75, 75) < 1) 
+               return -2; //just noise
 
-       for (; i < size-20; i++){
-               if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1]){
-                       // new up transition
-                       fcCounter++;
-                       if (fskAdj){
-                               //if we had 5 and now have 9 then go back to 8 (for when we get a fc 9 instead of an 8)
-                               if (lastFCcnt==5 && fcCounter==9) fcCounter--;
-                               //if fc=9 or 4 add one (for when we get a fc 9 instead of 10 or a 4 instead of a 5)
-                               if ((fcCounter==9) || fcCounter==4) fcCounter++;
-                       // save last field clock count  (fc/xx)
-                       lastFCcnt = fcCounter;
-                       }
-                       // find which fcLens to save it to:
-                       for (int ii=0; ii<15; ii++){
-                               if (fcLens[ii]==fcCounter){
-                                       fcCnts[ii]++;
-                                       fcCounter=0;
-                                       break;
-                               }
+       size_t errCnt = 0;
+       // if clean clipped waves detected run alternate demod
+       if (DetectCleanAskWave(BinStream, *size, high, low)) {
+               if (g_debugMode==2) prnt("DEBUG ASK: Clean Wave Detected - using clean wave demod");
+               errCnt = cleanAskRawDemod(BinStream, size, *clk, *invert, high, low, startIdx);
+               if (askType) { //askman
+                       uint8_t alignPos = 0;
+                       errCnt = manrawdecode(BinStream, size, 0, &alignPos);
+                       *startIdx += *clk/2 * alignPos;
+                       if (g_debugMode) prnt("DEBUG ASK CLEAN: startIdx %i, alignPos %u", *startIdx, alignPos);
+                       return errCnt;
+               } else { //askraw
+                       return errCnt;
+               }
+       }
+       if (g_debugMode) prnt("DEBUG ASK WEAK: startIdx %i", *startIdx);
+       if (g_debugMode==2) prnt("DEBUG ASK: Weak Wave Detected - using weak wave demod");
+
+       int lastBit;              //set first clock check - can go negative
+       size_t i, bitnum = 0;     //output counter
+       uint8_t midBit = 0;
+       uint8_t tol = 0;          //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave
+       if (*clk <= 32) tol = 1;  //clock tolerance may not be needed anymore currently set to + or - 1 but could be increased for poor waves or removed entirely
+       size_t MaxBits = 3072;    //max bits to collect
+       lastBit = start - *clk;
+
+       for (i = start; i < *size; ++i) {
+               if (i-lastBit >= *clk-tol){
+                       if (BinStream[i] >= high) {
+                               BinStream[bitnum++] = *invert;
+                       } else if (BinStream[i] <= low) {
+                               BinStream[bitnum++] = *invert ^ 1;
+                       } else if (i-lastBit >= *clk+tol) {
+                               if (bitnum > 0) {
+                                       if (g_debugMode==2) prnt("DEBUG ASK: Modulation Error at: %u", i);
+                                       BinStream[bitnum++]=7;
+                                       errCnt++;                                               
+                               } 
+                       } else { //in tolerance - looking for peak
+                               continue;
                        }
-                       if (fcCounter>0 && fcLensFnd<15){
-                               //add new fc length 
-                               fcCnts[fcLensFnd]++;
-                               fcLens[fcLensFnd++]=fcCounter;
+                       midBit = 0;
+                       lastBit += *clk;
+               } else if (i-lastBit >= (*clk/2-tol) && !midBit && !askType){
+                       if (BinStream[i] >= high) {
+                               BinStream[bitnum++] = *invert;
+                       } else if (BinStream[i] <= low) {
+                               BinStream[bitnum++] = *invert ^ 1;
+                       } else if (i-lastBit >= *clk/2+tol) {
+                               BinStream[bitnum] = BinStream[bitnum-1];
+                               bitnum++;
+                       } else { //in tolerance - looking for peak
+                               continue;
                        }
-                       fcCounter=0;
-               } else {
-                       // count sample
-                       fcCounter++;
+                       midBit = 1;
                }
+               if (bitnum >= MaxBits) break;
        }
+       *size = bitnum;
+       return errCnt;
+}
+
+int askdemod(uint8_t *BinStream, size_t *size, int *clk, int *invert, int maxErr, uint8_t amp, uint8_t askType) {
+       int start = 0;
+       return askdemod_ext(BinStream, size, clk, invert, maxErr, amp, askType, &start);
+}
+
+// by marshmellow - demodulate NRZ wave - requires a read with strong signal
+// peaks invert bit (high=1 low=0) each clock cycle = 1 bit determined by last peak
+int nrzRawDemod(uint8_t *dest, size_t *size, int *clk, int *invert, int *startIdx) {
+       if (justNoise(dest, *size)) return -1;
+       size_t clkStartIdx = 0;
+       *clk = DetectNRZClock(dest, *size, *clk, &clkStartIdx);
+       if (*clk==0) return -2;
+       size_t i, gLen = 4096;
+       if (gLen>*size) gLen = *size-20;
+       int high, low;
+       if (getHiLo(dest, gLen, &high, &low, 75, 75) < 1) return -3; //25% fuzz on high 25% fuzz on low
        
-       uint8_t best1=14, best2=14, best3=14;
-       uint16_t maxCnt1=0;
-       // go through fclens and find which ones are bigest 2  
-       for (i=0; i<15; i++){
-               // get the 3 best FC values
-               if (fcCnts[i]>maxCnt1) {
-                       best3=best2;
-                       best2=best1;
-                       maxCnt1=fcCnts[i];
-                       best1=i;
-               } else if(fcCnts[i]>fcCnts[best2]){
-                       best3=best2;
-                       best2=i;
-               } else if(fcCnts[i]>fcCnts[best3]){
-                       best3=i;
-               }
-               if (g_debugMode==2) prnt("DEBUG countfc: FC %u, Cnt %u, best fc: %u, best2 fc: %u",fcLens[i],fcCnts[i],fcLens[best1],fcLens[best2]);
-       }
-       if (fcLens[best1]==0) return 0;
-       uint8_t fcH=0, fcL=0;
-       if (fcLens[best1]>fcLens[best2]){
-               fcH=fcLens[best1];
-               fcL=fcLens[best2];
-       } else{
-               fcH=fcLens[best2];
-               fcL=fcLens[best1];
+       uint8_t bit=0;
+       //convert wave samples to 1's and 0's
+       for(i=20; i < *size-20; i++){
+               if (dest[i] >= high) bit = 1;
+               if (dest[i] <= low)  bit = 0;
+               dest[i] = bit;
        }
-       if ((size-180)/fcH/3 > fcCnts[best1]+fcCnts[best2]) {
-               if (g_debugMode==2) prnt("DEBUG countfc: fc is too large: %u > %u. Not psk or fsk",(size-180)/fcH/3,fcCnts[best1]+fcCnts[best2]);
-               return 0; //lots of waves not psk or fsk
+       //now demod based on clock (rf/32 = 32 1's for one 1 bit, 32 0's for one 0 bit) 
+       size_t lastBit = 0;
+       size_t numBits = 0;
+       for(i=21; i < *size-20; i++) {
+               //if transition detected or large number of same bits - store the passed bits
+               if (dest[i] != dest[i-1] || (i-lastBit) == (10 * *clk)) {
+                       memset(dest+numBits, dest[i-1] ^ *invert, (i - lastBit + (*clk/4)) / *clk);
+                       numBits += (i - lastBit + (*clk/4)) / *clk;
+                       if (lastBit == 0) {
+                               *startIdx = i - (numBits * *clk);
+                               if (g_debugMode==2) prnt("DEBUG NRZ: startIdx %i", *startIdx);
+                       }
+                       lastBit = i-1;
+               }
        }
-       // TODO: take top 3 answers and compare to known Field clocks to get top 2
-
-       uint16_t fcs = (((uint16_t)fcH)<<8) | fcL;
-       if (fskAdj) return fcs; 
-       return fcLens[best1];
+       *size = numBits;
+       return 0;
 }
 
-//by marshmellow
-//detect psk clock by reading each phase shift
-// a phase shift is determined by measuring the sample length of each wave
-int DetectPSKClock_ext(uint8_t dest[], size_t size, int clock, int *firstPhaseShift) {
-       uint8_t clk[]={255,16,32,40,50,64,100,128,255}; //255 is not a valid clock
-       uint16_t loopCnt = 4096;  //don't need to loop through entire array...
-       if (size == 0) return 0;
-       if (size<loopCnt) loopCnt = size-20;
-
-       //if we already have a valid clock quit
-       size_t i=1;
-       for (; i < 8; ++i)
-               if (clk[i] == clock) return clock;
+//translate wave to 11111100000 (1 for each short wave [higher freq] 0 for each long wave [lower freq])
+size_t fsk_wave_demod(uint8_t * dest, size_t size, uint8_t fchigh, uint8_t fclow, int *startIdx) {
+       size_t last_transition = 0;
+       size_t idx = 1;
+       if (fchigh==0) fchigh=10;
+       if (fclow==0) fclow=8;
+       //set the threshold close to 0 (graph) or 128 std to avoid static
+       size_t preLastSample = 0;
+       size_t LastSample = 0;
+       size_t currSample = 0;
+       if ( size < 1024 ) return 0; // not enough samples
 
-       size_t waveStart=0, waveEnd=0, firstFullWave=0, lastClkBit=0;
-       uint8_t clkCnt, fc=0, fullWaveLen=0, tol=1;
-       uint16_t peakcnt=0, errCnt=0, waveLenCnt=0;
-       uint16_t bestErr[]={1000,1000,1000,1000,1000,1000,1000,1000,1000};
-       uint16_t peaksdet[]={0,0,0,0,0,0,0,0,0};
-       fc = countFC(dest, size, 0);
-       if (fc!=2 && fc!=4 && fc!=8) return -1;
-       if (g_debugMode==2) prnt("DEBUG PSK: FC: %d",fc);
+       //find start of modulating data in trace 
+       idx = findModStart(dest, size, fchigh);
+       // Need to threshold first sample
+       if(dest[idx] < FSK_PSK_THRESHOLD) dest[0] = 0;
+       else dest[0] = 1;
+       
+       last_transition = idx;
+       idx++;
+       size_t numBits = 0;
+       // count cycles between consecutive lo-hi transitions, there should be either 8 (fc/8)
+       // or 10 (fc/10) cycles but in practice due to noise etc we may end up with anywhere
+       // between 7 to 11 cycles so fuzz it by treat anything <9 as 8 and anything else as 10
+       //  (could also be fc/5 && fc/7 for fsk1 = 4-9)
+       for(; idx < size; idx++) {
+               // threshold current value
+               if (dest[idx] < FSK_PSK_THRESHOLD) dest[idx] = 0;
+               else dest[idx] = 1;
 
-       //find first full wave
-       for (i=160; i<loopCnt; i++){
-               if (dest[i] < dest[i+1] && dest[i+1] >= dest[i+2]){
-                       if (waveStart == 0) {
-                               waveStart = i+1;
-                               //prnt("DEBUG: waveStart: %d",waveStart);
-                       } else {
-                               waveEnd = i+1;
-                               //prnt("DEBUG: waveEnd: %d",waveEnd);
-                               waveLenCnt = waveEnd-waveStart;
-                               if (waveLenCnt > fc){
-                                       firstFullWave = waveStart;
-                                       fullWaveLen=waveLenCnt;
-                                       break;
-                               } 
-                               waveStart=0;
+               // Check for 0->1 transition
+               if (dest[idx-1] < dest[idx]) {
+                       preLastSample = LastSample;
+                       LastSample = currSample;
+                       currSample = idx-last_transition;
+                       if (currSample < (fclow-2)) {                   //0-5 = garbage noise (or 0-3)
+                               //do nothing with extra garbage
+                       } else if (currSample < (fchigh-1)) {           //6-8 = 8 sample waves  (or 3-6 = 5)
+                               //correct previous 9 wave surrounded by 8 waves (or 6 surrounded by 5)
+                               if (numBits > 1 && LastSample > (fchigh-2) && (preLastSample < (fchigh-1))){
+                                       dest[numBits-1]=1;
+                               }
+                               dest[numBits++]=1;
+                       if (numBits > 0 && *startIdx==0) *startIdx = idx - fclow;
+                       } else if (currSample > (fchigh+1) && numBits < 3) { //12 + and first two bit = unusable garbage
+                               //do nothing with beginning garbage and reset..  should be rare..
+                               numBits = 0; 
+                       } else if (currSample == (fclow+1) && LastSample == (fclow-1)) { // had a 7 then a 9 should be two 8's (or 4 then a 6 should be two 5's)
+                               dest[numBits++]=1;
+                       if (numBits > 0 && *startIdx==0) *startIdx = idx - fclow;
+                       } else {                                        //9+ = 10 sample waves (or 6+ = 7)
+                               dest[numBits++]=0;
+                       if (numBits > 0 && *startIdx==0) *startIdx = idx - fchigh;
                        }
+                       last_transition = idx;
                }
        }
-       *firstPhaseShift = firstFullWave;
-       if (g_debugMode ==2) prnt("DEBUG PSK: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen);
-       //test each valid clock from greatest to smallest to see which lines up
-       for(clkCnt=7; clkCnt >= 1 ; clkCnt--){
-               lastClkBit = firstFullWave; //set end of wave as clock align
-               waveStart = 0;
-               errCnt=0;
-               peakcnt=0;
-               if (g_debugMode == 2) prnt("DEBUG PSK: clk: %d, lastClkBit: %d",clk[clkCnt],lastClkBit);
+       return numBits; //Actually, it returns the number of bytes, but each byte represents a bit: 1 or 0
+}
 
-               for (i = firstFullWave+fullWaveLen-1; i < loopCnt-2; i++){
-                       //top edge of wave = start of new wave 
-                       if (dest[i] < dest[i+1] && dest[i+1] >= dest[i+2]){
-                               if (waveStart == 0) {
-                                       waveStart = i+1;
-                                       waveLenCnt=0;
-                               } else { //waveEnd
-                                       waveEnd = i+1;
-                                       waveLenCnt = waveEnd-waveStart;
-                                       if (waveLenCnt > fc){ 
-                                               //if this wave is a phase shift
-                                               if (g_debugMode == 2) prnt("DEBUG PSK: phase shift at: %d, len: %d, nextClk: %d, i: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+clk[clkCnt]-tol,i+1,fc);
-                                               if (i+1 >= lastClkBit + clk[clkCnt] - tol){ //should be a clock bit
-                                                       peakcnt++;
-                                                       lastClkBit+=clk[clkCnt];
-                                               } else if (i<lastClkBit+8){
-                                                       //noise after a phase shift - ignore
-                                               } else { //phase shift before supposed to based on clock
-                                                       errCnt++;
-                                               }
-                                       } else if (i+1 > lastClkBit + clk[clkCnt] + tol + fc){
-                                               lastClkBit+=clk[clkCnt]; //no phase shift but clock bit
-                                       }
-                                       waveStart=i+1;
-                               }
+//translate 11111100000 to 10
+//rfLen = clock, fchigh = larger field clock, fclow = smaller field clock
+size_t aggregate_bits(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t invert, uint8_t fchigh, uint8_t fclow, int *startIdx) {
+       uint8_t lastval=dest[0];
+       size_t idx=0;
+       size_t numBits=0;
+       uint32_t n=1;
+       for( idx=1; idx < size; idx++) {
+               n++;
+               if (dest[idx]==lastval) continue; //skip until we hit a transition
+               
+               //find out how many bits (n) we collected (use 1/2 clk tolerance)
+               //if lastval was 1, we have a 1->0 crossing
+               if (dest[idx-1]==1) {
+                       n = (n * fclow + rfLen/2) / rfLen;
+               } else {// 0->1 crossing 
+                       n = (n * fchigh + rfLen/2) / rfLen; 
+               }
+               if (n == 0) n = 1;
+               
+               //first transition - save startidx
+               if (numBits == 0) {
+                       if (lastval == 1) {  //high to low
+                               *startIdx += (fclow * idx) - (n*rfLen);
+                               if (g_debugMode==2) prnt("DEBUG FSK: startIdx %i, fclow*idx %i, n*rflen %u", *startIdx, fclow*(idx), n*rfLen);
+                       } else {
+                               *startIdx += (fchigh * idx) - (n*rfLen);
+                               if (g_debugMode==2) prnt("DEBUG FSK: startIdx %i, fchigh*idx %i, n*rflen %u", *startIdx, fchigh*(idx), n*rfLen);
                        }
                }
-               if (errCnt == 0){
-                       return clk[clkCnt];
-               }
-               if (errCnt <= bestErr[clkCnt]) bestErr[clkCnt]=errCnt;
-               if (peakcnt > peaksdet[clkCnt]) peaksdet[clkCnt]=peakcnt;
-       } 
-       //all tested with errors 
-       //return the highest clk with the most peaks found
-       uint8_t best=7;
-       for (i=7; i>=1; i--){
-               if (peaksdet[i] > peaksdet[best]) {
-                       best = i;
+
+               //add to our destination the bits we collected          
+               memset(dest+numBits, dest[idx-1]^invert , n);
+               numBits += n;
+               n=0;
+               lastval=dest[idx];
+       }//end for
+       // if valid extra bits at the end were all the same frequency - add them in
+       if (n > rfLen/fchigh) {
+               if (dest[idx-2]==1) {
+                       n = (n * fclow + rfLen/2) / rfLen;
+               } else {
+                       n = (n * fchigh + rfLen/2) / rfLen;
                }
-               if (g_debugMode == 2) prnt("DEBUG PSK: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[i],peaksdet[i],bestErr[i],clk[best]);
+               memset(dest+numBits, dest[idx-1]^invert , n);
+               numBits += n;
        }
-       return clk[best];
+       return numBits;
 }
 
-int DetectPSKClock(uint8_t dest[], size_t size, int clock) {
-       int firstPhaseShift = 0;
-       return DetectPSKClock_ext(dest, size, clock, &firstPhaseShift);
+//by marshmellow  (from holiman's base)
+// full fsk demod from GraphBuffer wave to decoded 1s and 0s (no mandemod)
+int fskdemod_ext(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t invert, uint8_t fchigh, uint8_t fclow, int *startIdx) {
+       // FSK demodulator
+       size = fsk_wave_demod(dest, size, fchigh, fclow, startIdx);
+       size = aggregate_bits(dest, size, rfLen, invert, fchigh, fclow, startIdx);
+       return size;
 }
 
-//by marshmellow
-//detects the bit clock for FSK given the high and low Field Clocks
-uint8_t detectFSKClk_ext(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fcLow, int *firstClockEdge) {
-       uint8_t clk[] = {8,16,32,40,50,64,100,128,0};
-       uint16_t rfLens[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-       uint8_t rfCnts[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-       uint8_t rfLensFnd = 0;
-       uint8_t lastFCcnt = 0;
-       uint16_t fcCounter = 0;
-       uint16_t rfCounter = 0;
-       uint8_t firstBitFnd = 0;
-       size_t i;
-       if (size == 0) return 0;
+int fskdemod(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t invert, uint8_t fchigh, uint8_t fclow) {
+       int startIdx=0;
+       return fskdemod_ext(dest, size, rfLen, invert, fchigh, fclow, &startIdx);
+}
 
-       uint8_t fcTol = ((fcHigh*100 - fcLow*100)/2 + 50)/100; //(uint8_t)(0.5+(float)(fcHigh-fcLow)/2);
-       rfLensFnd=0;
-       fcCounter=0;
-       rfCounter=0;
-       firstBitFnd=0;
-       //PrintAndLog("DEBUG: fcTol: %d",fcTol);
-       // prime i to first peak / up transition
-       for (i = 160; i < size-20; i++)
-               if (BitStream[i] > BitStream[i-1] && BitStream[i]>=BitStream[i+1])
-                       break;
+// by marshmellow
+// convert psk1 demod to psk2 demod
+// only transition waves are 1s
+void psk1TOpsk2(uint8_t *BitStream, size_t size) {
+       size_t i=1;
+       uint8_t lastBit=BitStream[0];
+       for (; i<size; i++){
+               if (BitStream[i]==7){
+                       //ignore errors
+               } else if (lastBit!=BitStream[i]){
+                       lastBit=BitStream[i];
+                       BitStream[i]=1;
+               } else {
+                       BitStream[i]=0;
+               }
+       }
+       return;
+}
 
-       for (; i < size-20; i++){
-               fcCounter++;
-               rfCounter++;
+// by marshmellow
+// convert psk2 demod to psk1 demod
+// from only transition waves are 1s to phase shifts change bit
+void psk2TOpsk1(uint8_t *BitStream, size_t size) {
+       uint8_t phase=0;
+       for (size_t i=0; i<size; i++){
+               if (BitStream[i]==1){
+                       phase ^=1;
+               }
+               BitStream[i]=phase;
+       }
+       return;
+}
 
-               if (BitStream[i] <= BitStream[i-1] || BitStream[i] < BitStream[i+1]) 
-                       continue;               
-               // else new peak 
-               // if we got less than the small fc + tolerance then set it to the small fc
-               // if it is inbetween set it to the last counter
-               if (fcCounter < fcHigh && fcCounter > fcLow)
-                       fcCounter = lastFCcnt;
-               else if (fcCounter < fcLow+fcTol) 
-                       fcCounter = fcLow;
-               else //set it to the large fc
-                       fcCounter = fcHigh;
+size_t pskFindFirstPhaseShift(uint8_t samples[], size_t size, uint8_t *curPhase, size_t waveStart, uint16_t fc, uint16_t *fullWaveLen) {
+       uint16_t loopCnt = (size+3 < 4096) ? size : 4096;  //don't need to loop through entire array...
 
-               //look for bit clock  (rf/xx)
-               if ((fcCounter < lastFCcnt || fcCounter > lastFCcnt)){
-                       //not the same size as the last wave - start of new bit sequence
-                       if (firstBitFnd > 1){ //skip first wave change - probably not a complete bit
-                               for (int ii=0; ii<15; ii++){
-                                       if (rfLens[ii] >= (rfCounter-4) && rfLens[ii] <= (rfCounter+4)){
-                                               rfCnts[ii]++;
-                                               rfCounter = 0;
-                                               break;
-                                       }
-                               }
-                               if (rfCounter > 0 && rfLensFnd < 15){
-                                       //PrintAndLog("DEBUG: rfCntr %d, fcCntr %d",rfCounter,fcCounter);
-                                       rfCnts[rfLensFnd]++;
-                                       rfLens[rfLensFnd++] = rfCounter;
-                               }
-                       } else {
-                               *firstClockEdge = i;
-                               firstBitFnd++;
+       uint16_t avgWaveVal=0, lastAvgWaveVal=0;
+       size_t i = waveStart, waveEnd, waveLenCnt, firstFullWave;
+       for (; i<loopCnt; i++) {
+               // find peak 
+               if (samples[i]+fc < samples[i+1] && samples[i+1] >= samples[i+2]){
+                       waveEnd = i+1;
+                       if (g_debugMode == 2) prnt("DEBUG PSK: waveEnd: %u, waveStart: %u", waveEnd, waveStart);
+                       waveLenCnt = waveEnd-waveStart;
+                       if (waveLenCnt > fc && waveStart > fc && !(waveLenCnt > fc+8)){ //not first peak and is a large wave but not out of whack
+                               lastAvgWaveVal = avgWaveVal/(waveLenCnt);
+                               firstFullWave = waveStart;
+                               *fullWaveLen = waveLenCnt;
+                               //if average wave value is > graph 0 then it is an up wave or a 1 (could cause inverting)
+                               if (lastAvgWaveVal > FSK_PSK_THRESHOLD) *curPhase ^= 1;
+                               return firstFullWave;
                        }
-                       rfCounter=0;
-                       lastFCcnt=fcCounter;
+                       waveStart = i+1;
+                       avgWaveVal = 0;
                }
-               fcCounter=0;
+               avgWaveVal += samples[i+2];
        }
-       uint8_t rfHighest=15, rfHighest2=15, rfHighest3=15;
+       return 0;
+}
 
-       for (i=0; i<15; i++){
-               //get highest 2 RF values  (might need to get more values to compare or compare all?)
-               if (rfCnts[i]>rfCnts[rfHighest]){
-                       rfHighest3=rfHighest2;
-                       rfHighest2=rfHighest;
-                       rfHighest=i;
-               } else if(rfCnts[i]>rfCnts[rfHighest2]){
-                       rfHighest3=rfHighest2;
-                       rfHighest2=i;
-               } else if(rfCnts[i]>rfCnts[rfHighest3]){
-                       rfHighest3=i;
-               }
-               if (g_debugMode==2) prnt("DEBUG FSK: RF %d, cnts %d",rfLens[i], rfCnts[i]);
-       }  
-       // set allowed clock remainder tolerance to be 1 large field clock length+1 
-       //   we could have mistakenly made a 9 a 10 instead of an 8 or visa versa so rfLens could be 1 FC off  
-       uint8_t tol1 = fcHigh+1; 
+//by marshmellow - demodulate PSK1 wave 
+//uses wave lengths (# Samples) 
+int pskRawDemod_ext(uint8_t dest[], size_t *size, int *clock, int *invert, int *startIdx) {
+       if (*size < 170) return -1;
+
+       uint8_t curPhase = *invert;
+       size_t i=0, numBits=0, waveStart=1, waveEnd=0, firstFullWave=0, lastClkBit=0;
+       uint16_t fc=0, fullWaveLen=0, waveLenCnt=0, avgWaveVal, tol=1;
+       uint16_t errCnt=0, errCnt2=0;
        
-       if (g_debugMode==2) prnt("DEBUG FSK: most counted rf values: 1 %d, 2 %d, 3 %d",rfLens[rfHighest],rfLens[rfHighest2],rfLens[rfHighest3]);
+       fc = countFC(dest, *size, 1);
+       if ((fc >> 8) == 10) return -1; //fsk found - quit
+       fc = fc & 0xFF;
+       if (fc!=2 && fc!=4 && fc!=8) return -1;
+       *clock = DetectPSKClock(dest, *size, *clock);
+       if (*clock == 0) return -1;
 
-       // loop to find the highest clock that has a remainder less than the tolerance
-       //   compare samples counted divided by
-       // test 128 down to 32 (shouldn't be possible to have fc/10 & fc/8 and rf/16 or less)
-       int ii=7;
-       for (; ii>=2; ii--){
-               if (rfLens[rfHighest] % clk[ii] < tol1 || rfLens[rfHighest] % clk[ii] > clk[ii]-tol1){
-                       if (rfLens[rfHighest2] % clk[ii] < tol1 || rfLens[rfHighest2] % clk[ii] > clk[ii]-tol1){
-                               if (rfLens[rfHighest3] % clk[ii] < tol1 || rfLens[rfHighest3] % clk[ii] > clk[ii]-tol1){
-                                       if (g_debugMode==2) prnt("DEBUG FSK: clk %d divides into the 3 most rf values within tolerance",clk[ii]);
-                                       break;
+       //find start of modulating data in trace 
+       i = findModStart(dest, *size, fc);
+
+       //find first phase shift
+       firstFullWave = pskFindFirstPhaseShift(dest, *size, &curPhase, i, fc, &fullWaveLen);
+       if (firstFullWave == 0) {
+               // no phase shift detected - could be all 1's or 0's - doesn't matter where we start
+               // so skip a little to ensure we are past any Start Signal
+               firstFullWave = 160;
+               memset(dest, curPhase, firstFullWave / *clock);
+       } else {
+               memset(dest, curPhase^1, firstFullWave / *clock);
+       }
+       //advance bits
+       numBits += (firstFullWave / *clock);
+       *startIdx = firstFullWave - (*clock * numBits)+2;
+       //set start of wave as clock align
+       lastClkBit = firstFullWave;
+       if (g_debugMode==2) prnt("DEBUG PSK: firstFullWave: %u, waveLen: %u, startIdx %i",firstFullWave,fullWaveLen, *startIdx);
+       if (g_debugMode==2) prnt("DEBUG PSK: clk: %d, lastClkBit: %u, fc: %u", *clock, lastClkBit,(unsigned int) fc);
+       waveStart = 0;
+       dest[numBits++] = curPhase; //set first read bit
+       for (i = firstFullWave + fullWaveLen - 1; i < *size-3; i++){
+               //top edge of wave = start of new wave 
+               if (dest[i]+fc < dest[i+1] && dest[i+1] >= dest[i+2]){
+                       if (waveStart == 0) {
+                               waveStart = i+1;
+                               waveLenCnt = 0;
+                               avgWaveVal = dest[i+1];
+                       } else { //waveEnd
+                               waveEnd = i+1;
+                               waveLenCnt = waveEnd-waveStart;
+                               if (waveLenCnt > fc){
+                                       //this wave is a phase shift
+                                       //PrintAndLog("DEBUG: phase shift at: %d, len: %d, nextClk: %d, i: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+*clock-tol,i+1,fc);
+                                       if (i+1 >= lastClkBit + *clock - tol){ //should be a clock bit
+                                               curPhase ^= 1;
+                                               dest[numBits++] = curPhase;
+                                               lastClkBit += *clock;
+                                       } else if (i < lastClkBit+10+fc){
+                                               //noise after a phase shift - ignore
+                                       } else { //phase shift before supposed to based on clock
+                                               errCnt++;
+                                               dest[numBits++] = 7;
+                                       }
+                               } else if (i+1 > lastClkBit + *clock + tol + fc){
+                                       lastClkBit += *clock; //no phase shift but clock bit
+                                       dest[numBits++] = curPhase;
+                               } else if (waveLenCnt < fc - 1) { //wave is smaller than field clock (shouldn't happen often)
+                                       errCnt2++;
+                                       if(errCnt2 > 101) return errCnt2;
                                }
+                               avgWaveVal = 0;
+                               waveStart = i+1;
                        }
                }
+               avgWaveVal += dest[i+1];
        }
-
-       if (ii<2) return 0; // oops we went too far
-
-       return clk[ii];
+       *size = numBits;
+       return errCnt;
 }
 
-uint8_t        detectFSKClk(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fcLow) {
-       int firstClockEdge = 0;
-       return detectFSKClk_ext(BitStream, size, fcHigh, fcLow, &firstClockEdge);
+int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert) {
+       int startIdx = 0;
+       return pskRawDemod_ext(dest, size, clock, invert, &startIdx);
 }
 
-//-----------------Tag format detection section--------------------------------------------------------------
+//**********************************************************************************************
+//-----------------Tag format detection section-------------------------------------------------
+//**********************************************************************************************
 
 // by marshmellow
 // FSK Demod then try to locate an AWID ID
@@ -1842,7 +1891,6 @@ int VikingDemod_AM(uint8_t *dest, size_t *size) {
        return (int) startIdx;
 }
 
-
 // by iceman
 // find Visa2000 preamble in already demoded data
 int Visa2kDemod_AM(uint8_t *dest, size_t *size) {
Impressum, Datenschutz