git.zerfleddert.de Git - proxmark3-svn/blobdiff

## [unreleased][unreleased]

### Added

## [unreleased][unreleased]

### Added

+- Added lf noralsy demod, read, clone, sim commands (iceman)

+- Added lf jablotron demod, read, clone, sim commands (iceman)

+- Added lf nexwatch read - reads a nexwatch tag from the antenna

+- Added lf paradox read - reads a paradox tag from the antenna

+- Added lf fdx sim (iceman)

+- Added lf fdx clone - clones an fdx-b animal tag to t55x7 or q5 (iceman)

+- Added lf fdx read - reads a fdx-b tag from the antenna (iceman)

+- Added lf gproxii read - reads a gproxii tag from the antenna (marshmellow)

+- Added lf indala read - reads an indala tag from the antenna (marshmellow)

+- Added lf visa2000 demod, read, clone, sim commands (iceman)

+- Added markers in the graph around found Sequence Terminator after askmandemod.

+- Added data mtrim <start> <stop> command to trim out samples between start and stop

+- Added data setgraphmarkers <orange> <blue> command to set two extra markers on the graph (marshmellow)

+- Added EM4x05/EM4x69 chip detection to lf search (marshmellow)

+- Added lf em 4x05dump command to read and output all the blocks of the chip (marshmellow)

+- Added lf em 4x05info command to read and display information about the chip (marshmellow)

+- Added lf cotag read, and added it to lf search (iceman)

+- Added hitag2 read UID only and added that to lf search (marshmellow)

+- Added lf pyramid commands (iceman)

+- Added lf presco commands - some bits not fully understood... (iceman)

+- Added experimental HitagS support (Oguzhan Cicek, Hendrik Schwartke, Ralf Spenneberg)

+ see https://media.ccc.de/v/32c3-7166-sicherheit_von_125khz_transpondern_am_beispiel_hitag_s

+ English video available

+- Added a LF ASK Sequence Terminator detection option to the standard ask demod - and applied it to `lf search u`, `lf t55xx detect`, and `data rawdemod am s` (marshmellow)

+- `lf t55xx bruteforce <start password> <end password> [i <*.dic>]` - Simple bruteforce attack to find password - (iceman and others)

+- `lf viking clone`- clone viking tag to t55x7 or Q5 from 4byte hex ID input

+- `lf viking sim` - sim full viking tag from 4byte hex ID input

+- `lf viking read` - read viking tag and output ID

+- `lf t55xx wipe` - sets t55xx back to factory defaults

+- Added viking demod to `lf search` (marshmellow)

+- `lf viking demod` demod viking id tag from graphbuffer (marshmellow)

+- `lf t55xx resetread` added reset then read command - should allow determining start of stream transmissions (marshmellow)

+- `lf t55xx wakeup` added wake with password (AOR) to allow lf search or standard lf read after (iceman, marshmellow)

+- `hf iclass managekeys` to save, load and manage iclass keys. (adjusted most commands to accept a loaded key in memory) (marshmellow)

+- `hf iclass readblk` to select, authenticate, and read 1 block from an iclass card (marshmellow)

+- `hf iclass writeblk` to select, authenticate, and write 1 block to an iclass card (or picopass) (marshmellow + others)

+- `hf iclass clone` to take a saved dump file and clone selected blocks to a new tag (marshmellow + others)

+- `hf iclass calcnewkey` - to calculate the div_key change to change a key - (experimental) (marshmellow + others)

+- `hf iclass encryptblk` - to encrypt a data block hex to prep for writing that block (marshmellow)

- ISO14443a stand-alone operation with ARM CFLAG="WITH_ISO14443a_StandAlone". This code can read & emulate two banks of 14a tag UIDs and write to "magic" cards (Craig Young)

- AWID26 command context added as 'lf awid' containing realtime demodulation as well as cloning/simulation based on tag numbers (Craig Young)

- Added 'hw status'. This command makes the ARM print out some runtime information. (holiman)

- Added 'hw ping'. This command just sends a usb packets and checks if the pm3 is responsive. Can be used to abort certain operations which supports abort over usb. (holiman)

- ISO14443a stand-alone operation with ARM CFLAG="WITH_ISO14443a_StandAlone". This code can read & emulate two banks of 14a tag UIDs and write to "magic" cards (Craig Young)

- AWID26 command context added as 'lf awid' containing realtime demodulation as well as cloning/simulation based on tag numbers (Craig Young)

- Added 'hw status'. This command makes the ARM print out some runtime information. (holiman)

- Added 'hw ping'. This command just sends a usb packets and checks if the pm3 is responsive. Can be used to abort certain operations which supports abort over usb. (holiman)

+- Added `data hex2bin` and `data bin2hex` for command line conversion between binary and hexadecimal (holiman)

+- Added 'hf snoop'. This command take digitalized signal from FPGA and put in BigBuffer. (pwpiwi + enio)

+- Added Topaz (NFC type 1) protocol support ('hf topaz reader', 'hf list topaz', 'hf 14a raw -T', 'hf topaz snoop'). (piwi)

+- Added option c to 'hf list' (mark CRC bytes) (piwi)

### Changed

+- `data psknexwatchdemod` has been moved to `lf nexwatch demod` (reads from graphbuffer)

+- `data fskparadoxdemod` has been moved to `lf paradox demod` (reads from graphbuffer)

+- `data fdxdemod` has been moved to `lf fdx demod` (reads from graphbuffer)

+- `data askgproxiidemod has been moved to `lf gproxii demod` (reads from graphbuffer)

+- `lf indalaclone` has been moved to `lf indala clone`

+- `lf indalademod` has been moved to `lf indala altdemod` (reads from graphbuffer)

+- `data pskindalademod` has been moved to `lf indala demod` (reads from graphbuffer)

+- `data askvikingdemod` has been moved to `lf viking demod` (reads from graphbuffer)

+- `data fskpyramiddemod` has been moved to `lf pyramid demod` (reads from graphbuffer)

+- `data fskiodemod` has been moved to `lf io demod` (reads from graphbuffer)

+- `lf io fskdemod` has been renamed to `lf io read` (reads from antenna)

+- `data fskawiddemod` has been moved to `lf awid demod` (reads from graphbuffer)

+- `lf awid fskdemod` has been renamed to `lf awid read` (reads from antenna)

+- `data fskhiddemod` has been moved to `lf hid demod` (reads from graphbuffer)

+- `lf hid demod` has been renamed to `lf hid read` (reads from antenna)

+- all em410x demod and print functions moved to cmdlfem4x.c

+- `data askem410xdemod` has been moved to `lf em 410xdemod` (reads from graphbuffer)

+- `lf em 410xdemod` has been renamed to `lf em 410xread` (reads from antenna)

+- hf mf dump - added retry loops to try each read attempt up to 3 times. makes getting a complete dump easier with many antennas.

+- small changes to lf psk and fsk demods to improve results when the trace begins with noise or the chip isn't broadcasting yet (marshmellow)

+- NOTE CHANGED ALL `lf em4x em*` cmds to simpler `lf em ` - example: `lf em4x em410xdemod` is now `lf em 410xdemod`

+- Renamed and rebuilt `lf em readword` && readwordpwd to `lf em 4x05readword` - it now demods and outputs the read block (marshmellow/iceman)

+- Renamed and rebuilt `lf em writeword` && writewordpwd to `lf em 4x05writeword` - it now also reads validation output from the tag (marshmellow/iceman)

+- Fixed bug in lf sim and continuous demods not turning off antenna when finished

+- Fixed bug(s) in hf iclass write

+- Fixed bug in lf biphase sim - `lf simask b` (and any tagtype that relies on it - gproxii...) (marshmellow)

+- Fixed bug in lf viking clone/sim (iceman)

+- Fixed broken `data askedgedetect` (marshmellow)

+- Adjusted hf mf sim command (marshmellow)

+ added auto run mfkey32 to extract all keys

+ also added f parameter to allow attacking with UIDs from a file (implies x and i parameters)

+ also added e parameter to allow adding the extracted keys to emulator memory for the next simulation

+ added 10 byte uid option

+- Added `[l] <length>` option to data printdemodbuffer (marshmellow)

+- Adjusted lf awid clone to optionally clone to Q5 tags (marshmellow)

+- Adjusted lf t55xx detect to find Q5 tags (t5555) instead of just t55x7 (marshmellow)

+- Adjusted all lf NRZ demods - works more accurately and consistently (as long as you have strong signal) (marshmellow)

+- Adjusted lf pskindalademod to reduce false positive reads. (marshmellow)

+- Small adjustments to psk, nrz, and ask clock detect routines - more reliable. (marshmellow)

+- Adjusted lf em410x em410xsim to accept a clock argument (marshmellow)

+- Adjusted lf t55xx dump to allow overriding the safety check and warning text (marshmellow)

+- Adjusted lf t55xx write input variables (marshmellow)

+- Adjusted lf t55xx read with password safety check and warning text and adjusted the input variables (marshmellow & iceman)

+- Adjusted LF FSK demod to account for cross threshold fluctuations (898 count waves will adjust the 9 to 8 now...) more accurate. (marshmellow)

+- Adjusted timings for t55xx commands. more reliable now. (marshmellow & iceman)

+- `lf cmdread` adjusted input methods and added help text (marshmellow & iceman)

+- changed `lf config t <threshold>` to be 0 - 128 and will trigger on + or - threshold value (marshmellow)

+- `hf iclass dump` cli options - can now dump AA1 and AA2 with different keys in one run (does not go to multiple pages for the larger tags yet) (marshmellow)

- Revised workflow for StandAloneMode14a (Craig Young)

- EPA functions (`hf epa`) now support both ISO 14443-A and 14443-B cards (frederikmoellers)

- 'hw version' only talks to ARM at startup, after that the info is cached. (pwpiwi)

- Revised workflow for StandAloneMode14a (Craig Young)

- EPA functions (`hf epa`) now support both ISO 14443-A and 14443-B cards (frederikmoellers)

- 'hw version' only talks to ARM at startup, after that the info is cached. (pwpiwi)

+- Added `r` option to iclass functions - allows key to be provided in raw block 3/4 format

## [2.2.0][2015-07-12]