Removed dupicate symbols

[proxmark3-svn] / armsrc / appmain.c

diff --git a/armsrc/appmain.c b/armsrc/appmain.c
index 7af47a51945094510cb7f7a6a7cc62e4e3f9188c..947c12ccdb9d474d349c5f2feac1bdc676a4546d 100644 (file)
--- a/armsrc/appmain.c
+++ b/armsrc/appmain.c
@@ -214,7 +214,8 @@ void MeasureAntennaTuning(void)
  * ( hopefully around 95 if it is tuned to 125kHz!)
  */
   
  * ( hopefully around 95 if it is tuned to 125kHz!)
  */
   

-       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);

        for (i=255; i>19; i--) {
     WDT_HIT();
                FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);
        for (i=255; i>19; i--) {
     WDT_HIT();
                FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);


@@ -236,6 +237,7 @@ void MeasureAntennaTuning(void)
 
   LED_A_ON();
        // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
 
   LED_A_ON();
        // Let the FPGA drive the high-frequency antenna around 13.56 MHz.

+       FpgaDownloadAndGo(FPGA_BITSTREAM_HF);

        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
        SpinDelay(20);
        // Vref = 3300mV, and an 10:1 voltage divider on the input
        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
        SpinDelay(20);
        // Vref = 3300mV, and an 10:1 voltage divider on the input


@@ -264,6 +266,7 @@ void MeasureAntennaTuningHf(void)
 
        for (;;) {
                // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
 
        for (;;) {
                // Let the FPGA drive the high-frequency antenna around 13.56 MHz.

+               FpgaDownloadAndGo(FPGA_BITSTREAM_HF);

                FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
                SpinDelay(20);
                // Vref = 3300mV, and an 10:1 voltage divider on the input
                FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
                SpinDelay(20);
                // Vref = 3300mV, and an 10:1 voltage divider on the input


@@ -286,6 +289,7 @@ void SimulateTagHfListen(void)
 
        // We're using this mode just so that I can test it out; the simulated
        // tag mode would work just as well and be simpler.
 
        // We're using this mode just so that I can test it out; the simulated
        // tag mode would work just as well and be simpler.

+       FpgaDownloadAndGo(FPGA_BITSTREAM_HF);

        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP);
 
        // We need to listen to the high-frequency, peak-detected path.
        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP);
 
        // We need to listen to the high-frequency, peak-detected path.


@@ -336,7 +340,7 @@ extern struct version_information version_information;
 extern char *_bootphase1_version_pointer, _flash_start, _flash_end;
 void SendVersion(void)
 {
 extern char *_bootphase1_version_pointer, _flash_start, _flash_end;
 void SendVersion(void)
 {

-       char temp[48]; /* Limited data payload in USB packets */
+       char temp[256]; /* Limited data payload in USB packets */

        DbpString("Prox/RFID mark3 RFID instrument");
 
        /* Try to find the bootrom version information. Expect to find a pointer at
        DbpString("Prox/RFID mark3 RFID instrument");
 
        /* Try to find the bootrom version information. Expect to find a pointer at


@@ -365,6 +369,7 @@ void SendVersion(void)
 void SamyRun()
 {
        DbpString("Stand-alone mode! No PC necessary.");
 void SamyRun()
 {
        DbpString("Stand-alone mode! No PC necessary.");

+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);

 
        // 3 possible options? no just 2 for now
 #define OPTS 2
 
        // 3 possible options? no just 2 for now
 #define OPTS 2


@@ -633,6 +638,10 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K:
                        ModThenAcquireRawAdcSamples125k(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
                        break;
                case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K:
                        ModThenAcquireRawAdcSamples125k(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
                        break;

+               case CMD_LF_SNOOP_RAW_ADC_SAMPLES:
+                       SnoopLFRawAdcSamples(c->arg[0], c->arg[1]);
+                       cmd_send(CMD_ACK,0,0,0,0,0);
+                       break;

                case CMD_HID_DEMOD_FSK:
                        CmdHIDdemodFSK(0, 0, 0, 1);                                     // Demodulate HID tag
                        break;
                case CMD_HID_DEMOD_FSK:
                        CmdHIDdemodFSK(0, 0, 0, 1);                                     // Demodulate HID tag
                        break;


@@ -792,7 +801,16 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        MifareUReadBlock(c->arg[0],c->d.asBytes);
                        break;
                case CMD_MIFAREU_READCARD:
                        MifareUReadBlock(c->arg[0],c->d.asBytes);
                        break;
                case CMD_MIFAREU_READCARD:

-                       MifareUReadCard(c->arg[0],c->d.asBytes);
+                        MifareUReadCard(c->arg[0],c->arg[1],c->d.asBytes);
+                        break;
+                case CMD_MIFAREUC_READCARD:
+                        MifareUReadCard(c->arg[0],c->arg[1],c->d.asBytes);
+                        break;
+                case CMD_MIFAREUC_AUTH1:
+                        MifareUC_Auth1(c->arg[0],c->d.asBytes);
+                        break;
+                case CMD_MIFAREUC_AUTH2:
+                        MifareUC_Auth2(c->arg[0],c->d.asBytes);

                         break;
                case CMD_MIFARE_READSC:
                        MifareReadSector(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                         break;
                case CMD_MIFARE_READSC:
                        MifareReadSector(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);


@@ -815,7 +833,12 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_SIMULATE_MIFARE_CARD:
                        Mifare1ksim(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_SIMULATE_MIFARE_CARD:
                        Mifare1ksim(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;

-               
+               case CMD_MIFARE_DES_AUTH1:
+                        Mifare_DES_Auth1(c->arg[0],c->d.asBytes);
+                        break;
+                case CMD_MIFARE_DES_AUTH2:
+                        Mifare_DES_Auth2(c->arg[0],c->d.asBytes);
+                        break;         

                // emulator
                case CMD_MIFARE_SET_DBGMODE:
                        MifareSetDbgLvl(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                // emulator
                case CMD_MIFARE_SET_DBGMODE:
                        MifareSetDbgLvl(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);


@@ -858,6 +881,12 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_READER_ICLASS:
                        ReaderIClass(c->arg[0]);
                        break;
                case CMD_READER_ICLASS:
                        ReaderIClass(c->arg[0]);
                        break;

+               case CMD_READER_ICLASS_REPLAY:
+                   ReaderIClass_Replay(c->arg[0], c->d.asBytes);
+                       break;
+               case CMD_ICLASS_ISO14443A_GETPUBLIC:
+                   IClass_iso14443A_GetPublic(c->arg[0]);
+                   break;

 #endif
 
                case CMD_SIMULATE_TAG_HF_LISTEN:
 #endif
 
                case CMD_SIMULATE_TAG_HF_LISTEN:


@@ -923,6 +952,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        break;
 
                case CMD_SET_LF_DIVISOR:
                        break;
 
                case CMD_SET_LF_DIVISOR:

+                       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);

                        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, c->arg[0]);
                        break;
 
                        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, c->arg[0]);
                        break;
 


@@ -1017,7 +1047,8 @@ void  __attribute__((noreturn)) AppMain(void)
        AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
 
        // Load the FPGA image, which we have stored in our flash.
        AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
 
        // Load the FPGA image, which we have stored in our flash.

-       FpgaDownloadAndGo();
+       // (the HF version by default)
+       FpgaDownloadAndGo(FPGA_BITSTREAM_HF);

 
        StartTickCount();
        
 
        StartTickCount();