]> git.zerfleddert.de Git - proxmark3-svn/blobdiff - common/lfdemod.c
ADD: @marshmellow42 's changes to "hf mfu *" ,
[proxmark3-svn] / common / lfdemod.c
index ffa807febf702baf80ff6e48c93037f8d60b0350..4c0f3ad9579cae8a90b4473fa4f6d44885831542 100644 (file)
 #include <stdlib.h>
 #include <string.h>
 #include "lfdemod.h"
+#include "common.h"
+
+//un_comment to allow debug print calls when used not on device
+void dummy(char *fmt, ...){}
+
+#ifndef ON_DEVICE
+#include "ui.h"
+#include "cmdparser.h"
+#include "cmddata.h"
+#define prnt PrintAndLog
+#else 
+       uint8_t g_debugMode=0;
+#define prnt dummy
+#endif
+
 uint8_t justNoise(uint8_t *BitStream, size_t size)
 {
        static const uint8_t THRESHOLD = 123;
@@ -52,6 +67,81 @@ uint8_t parityTest(uint32_t bits, uint8_t bitLen, uint8_t pType)
        return (ans == pType);
 }
 
+//by marshmellow
+// takes a array of binary values, start position, length of bits per parity (includes parity bit),
+//   Parity Type (1 for odd; 0 for even; 2 Always 1's), and binary Length (length to run) 
+size_t removeParity(uint8_t *BitStream, size_t startIdx, uint8_t pLen, uint8_t pType, size_t bLen)
+{
+       uint32_t parityWd = 0;
+       size_t j = 0, bitCnt = 0;
+       for (int word = 0; word < (bLen); word+=pLen){
+               for (int bit=0; bit < pLen; bit++){
+                       parityWd = (parityWd << 1) | BitStream[startIdx+word+bit];
+                       BitStream[j++] = (BitStream[startIdx+word+bit]);
+               }
+               j--; // overwrite parity with next data
+               // if parity fails then return 0
+               if (pType == 2) { // then marker bit which should be a 1
+                       if (!BitStream[j]) return 0;
+               } else {
+                       if (parityTest(parityWd, pLen, pType) == 0) return 0;                   
+               }
+               bitCnt+=(pLen-1);
+               parityWd = 0;
+       }
+       // if we got here then all the parities passed
+       //return ID start index and size
+       return bitCnt;
+}
+
+// by marshmellow
+// takes a array of binary values, length of bits per parity (includes parity bit),
+//   Parity Type (1 for odd; 0 for even; 2 Always 1's), and binary Length (length to run)
+size_t addParity(uint8_t *BitSource, uint8_t *dest, uint8_t sourceLen, uint8_t pLen, uint8_t pType)
+{
+       uint32_t parityWd = 0;
+       size_t j = 0, bitCnt = 0;
+       for (int word = 0; word < sourceLen; word+=pLen-1) {
+               for (int bit=0; bit < pLen-1; bit++){
+                       parityWd = (parityWd << 1) | BitSource[word+bit];
+                       dest[j++] = (BitSource[word+bit]);
+               }
+               // if parity fails then return 0
+               if (pType == 2) { // then marker bit which should be a 1
+                       dest[j++]=1;
+               } else {
+                       dest[j++] = parityTest(parityWd, pLen-1, pType) ^ 1;
+               }
+               bitCnt += pLen;
+               parityWd = 0;
+       }
+       // if we got here then all the parities passed
+       //return ID start index and size
+       return bitCnt;
+}
+
+uint32_t bytebits_to_byte(uint8_t *src, size_t numbits)
+{
+       uint32_t num = 0;
+       for(int i = 0 ; i < numbits ; i++)
+       {
+               num = (num << 1) | (*src);
+               src++;
+       }
+       return num;
+}
+
+//least significant bit first
+uint32_t bytebits_to_byteLSBF(uint8_t *src, size_t numbits)
+{
+       uint32_t num = 0;
+       for(int i = 0 ; i < numbits ; i++)
+       {
+               num = (num << 1) | *(src + (numbits-(i+1)));
+       }
+       return num;
+}
+
 //by marshmellow
 //search for given preamble in given BitStream and return success=1 or fail=0 and startIndex and length
 uint8_t preambleSearch(uint8_t *BitStream, uint8_t *preamble, size_t pLen, size_t *size, size_t *startIdx)
@@ -81,10 +171,8 @@ uint8_t Em410xDecode(uint8_t *BitStream, size_t *size, size_t *startIdx, uint32_
        //  otherwise could be a void with no arguments
        //set defaults
        uint32_t i = 0;
-       if (BitStream[1]>1){  //allow only 1s and 0s
-               // PrintAndLog("no data found");
-               return 0;
-       }
+       if (BitStream[1]>1) return 0;  //allow only 1s and 0s
+
        // 111111111 bit pattern represent start of frame
        //  include 0 in front to help get start pos
        uint8_t preamble[] = {0,1,1,1,1,1,1,1,1,1};
@@ -115,216 +203,11 @@ uint8_t Em410xDecode(uint8_t *BitStream, size_t *size, size_t *startIdx, uint32_
 }
 
 //by marshmellow
-//takes 3 arguments - clock, invert, maxErr as integers
-//attempts to demodulate ask while decoding manchester
-//prints binary found and saves in graphbuffer for further commands
-int askmandemod(uint8_t *BinStream, size_t *size, int *clk, int *invert, int maxErr)
-{
-       size_t i;
-       int start = DetectASKClock(BinStream, *size, clk, 20); //clock default
-       if (*clk==0 || start < 0) return -3;
-       if (*invert != 1) *invert=0;
-       uint8_t initLoopMax = 255;
-       if (initLoopMax > *size) initLoopMax = *size;
-       // Detect high and lows
-       // 25% fuzz in case highs and lows aren't clipped [marshmellow]
-       int high, low;
-       if (getHiLo(BinStream, initLoopMax, &high, &low, 75, 75) < 1) return -2; //just noise
-
-       // PrintAndLog("DEBUG - valid high: %d - valid low: %d",high,low);
-       int lastBit = 0;  //set first clock check
-       uint16_t bitnum = 0;     //output counter
-       uint8_t tol = 0;  //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave
-       if (*clk <= 32) tol=1;    //clock tolerance may not be needed anymore currently set to + or - 1 but could be increased for poor waves or removed entirely
-       size_t iii = 0;
-       //if 0 errors allowed then only try first 2 clock cycles as we want a low tolerance
-       if (!maxErr) initLoopMax = *clk * 2; 
-       uint16_t errCnt = 0, MaxBits = 512;
-       uint16_t bestStart = start;
-       uint16_t bestErrCnt = 0;
-       // PrintAndLog("DEBUG - lastbit - %d",lastBit);
-       // if best start position not already found by detect clock then
-       if (start <= 0 || start > initLoopMax){
-               bestErrCnt = maxErr+1;
-               // loop to find first wave that works
-               for (iii=0; iii < initLoopMax; ++iii){
-                       // if no peak skip
-                       if (BinStream[iii] < high && BinStream[iii] > low) continue;
-
-                       lastBit = iii - *clk;
-                       // loop through to see if this start location works
-                       for (i = iii; i < *size; ++i) {
-                               if ((i-lastBit) > (*clk-tol) && (BinStream[i] >= high || BinStream[i] <= low)) {
-                                               lastBit += *clk;
-                               } else if ((i-lastBit) > (*clk+tol)) {
-                                       errCnt++;
-                                       lastBit += *clk;
-                               }
-                               if ((i-iii) > (MaxBits * *clk) || errCnt > maxErr) break; //got plenty of bits or too many errors
-                       }
-                       //we got more than 64 good bits and not all errors
-                       if ((((i-iii)/ *clk) > (64)) && (errCnt<=maxErr)) {
-                               //possible good read
-                               if (!errCnt || errCnt < bestErrCnt){
-                                       bestStart = iii; //set this as new best run
-                                       bestErrCnt = errCnt;
-                                       if (!errCnt) break;  //great read - finish
-                               }
-                       }
-                       errCnt = 0;
-               }
-       }
-       if (bestErrCnt > maxErr){
-               *invert = bestStart;
-               *clk = iii;
-               return -1;
-       }               
-       //best run is good enough set to best run and set overwrite BinStream
-       lastBit = bestStart - *clk;
-       errCnt = 0;
-       for (i = bestStart; i < *size; ++i) {
-               if ((BinStream[i] >= high) && ((i-lastBit) > (*clk-tol))){
-                       //high found and we are expecting a bar
-                       lastBit += *clk;
-                       BinStream[bitnum++] = *invert;
-               } else if ((BinStream[i] <= low) && ((i-lastBit) > (*clk-tol))){
-                       //low found and we are expecting a bar
-                       lastBit += *clk;
-                       BinStream[bitnum++] = *invert ^ 1;
-               } else if ((i-lastBit)>(*clk+tol)){
-                       //should have hit a high or low based on clock!!
-                       //PrintAndLog("DEBUG - no wave in expected area - location: %d, expected: %d-%d, lastBit: %d - resetting search",i,(lastBit+(clk-((int)(tol)))),(lastBit+(clk+((int)(tol)))),lastBit);
-                       if (bitnum > 0) {
-                               BinStream[bitnum++] = 77;
-                               errCnt++;
-                       }               
-                       lastBit += *clk;//skip over error
-               }
-               if (bitnum >= MaxBits) break;
-       }
-       *size = bitnum;
-       return bestErrCnt;
-}
-
-//by marshmellow
-//encode binary data into binary manchester 
-int ManchesterEncode(uint8_t *BitStream, size_t size)
-{
-       size_t modIdx=20000, i=0;
-       if (size>modIdx) return -1;
-       for (size_t idx=0; idx < size; idx++){
-               BitStream[idx+modIdx++] = BitStream[idx];
-               BitStream[idx+modIdx++] = BitStream[idx]^1;
-       }
-       for (; i<(size*2); i++){
-               BitStream[i] = BitStream[i+20000];
-       }
-       return i;
-}
-
-//by marshmellow
-//take 10 and 01 and manchester decode
-//run through 2 times and take least errCnt
-int manrawdecode(uint8_t * BitStream, size_t *size)
-{
-       uint16_t bitnum=0, MaxBits = 512, errCnt = 0;
-       size_t i, ii;
-       uint16_t bestErr = 1000, bestRun = 0;
-       if (size == 0) return -1;
-       for (ii=0;ii<2;++ii){
-               for (i=ii; i<*size-2; i+=2)
-                       if (BitStream[i]==BitStream[i+1])
-                               errCnt++;
-
-               if (bestErr>errCnt){
-                       bestErr=errCnt;
-                       bestRun=ii;
-               }
-               errCnt=0;
-       }
-       if (bestErr<20){
-               for (i=bestRun; i < *size-2; i+=2){
-                       if(BitStream[i] == 1 && (BitStream[i+1] == 0)){
-                               BitStream[bitnum++]=0;
-                       } else if((BitStream[i] == 0) && BitStream[i+1] == 1){
-                               BitStream[bitnum++]=1;
-                       } else {
-                               BitStream[bitnum++]=77;
-                       }
-                       if(bitnum>MaxBits) break;
-               }
-               *size=bitnum;
-       }
-       return bestErr;
-}
-
-//by marshmellow
-//take 01 or 10 = 1 and 11 or 00 = 0
-//check for phase errors - should never have 111 or 000 should be 01001011 or 10110100 for 1010
-//decodes biphase or if inverted it is AKA conditional dephase encoding AKA differential manchester encoding
-int BiphaseRawDecode(uint8_t *BitStream, size_t *size, int offset, int invert)
-{
-       uint16_t bitnum = 0;
-       uint16_t errCnt = 0;
-       size_t i = offset;
-       uint16_t MaxBits=512;
-       //if not enough samples - error
-       if (*size < 51) return -1;
-       //check for phase change faults - skip one sample if faulty
-       uint8_t offsetA = 1, offsetB = 1;
-       for (; i<48; i+=2){
-               if (BitStream[i+1]==BitStream[i+2]) offsetA=0; 
-               if (BitStream[i+2]==BitStream[i+3]) offsetB=0;                                  
-       }
-       if (!offsetA && offsetB) offset++;
-       for (i=offset; i<*size-3; i+=2){
-               //check for phase error
-               if (BitStream[i+1]==BitStream[i+2]) {
-                       BitStream[bitnum++]=77;
-                       errCnt++;
-               }
-               if((BitStream[i]==1 && BitStream[i+1]==0) || (BitStream[i]==0 && BitStream[i+1]==1)){
-                       BitStream[bitnum++]=1^invert;
-               } else if((BitStream[i]==0 && BitStream[i+1]==0) || (BitStream[i]==1 && BitStream[i+1]==1)){
-                       BitStream[bitnum++]=invert;
-               } else {
-                       BitStream[bitnum++]=77;
-                       errCnt++;
-               }
-               if(bitnum>MaxBits) break;
-       }
-       *size=bitnum;
-       return errCnt;
-}
-
-//by marshmellow
-void askAmp(uint8_t *BitStream, size_t size)
-{
-       int shift = 127;
-       int shiftedVal=0;
-       for(size_t i = 1; i<size; i++){
-               if (BitStream[i]-BitStream[i-1]>=30) //large jump up
-                       shift=127;
-               else if(BitStream[i]-BitStream[i-1]<=-20) //large jump down
-                       shift=-127;
-
-               shiftedVal=BitStream[i]+shift;
-
-               if (shiftedVal>255) 
-                       shiftedVal=255;
-               else if (shiftedVal<0) 
-                       shiftedVal=0;
-               BitStream[i-1] = shiftedVal;
-       }
-       return;
-}
-
-// demodulates strong heavily clipped samples
+//demodulates strong heavily clipped samples
 int cleanAskRawDemod(uint8_t *BinStream, size_t *size, int clk, int invert, int high, int low)
 {
        size_t bitCnt=0, smplCnt=0, errCnt=0;
        uint8_t waveHigh = 0;
-       //PrintAndLog("clk: %d", clk);
        for (size_t i=0; i < *size; i++){
                if (BinStream[i] >= high && waveHigh){
                        smplCnt++;
@@ -335,7 +218,7 @@ int cleanAskRawDemod(uint8_t *BinStream, size_t *size, int clk, int invert, int
                                if (smplCnt > clk-(clk/4)-1) { //full clock
                                        if (smplCnt > clk + (clk/4)+1) { //too many samples
                                                errCnt++;
-                                               BinStream[bitCnt++]=77;
+                                               BinStream[bitCnt++]=7;
                                        } else if (waveHigh) {
                                                BinStream[bitCnt++] = invert;
                                                BinStream[bitCnt++] = invert;
@@ -371,111 +254,81 @@ int cleanAskRawDemod(uint8_t *BinStream, size_t *size, int clk, int invert, int
 }
 
 //by marshmellow
-//takes 3 arguments - clock, invert and maxErr as integers
-//attempts to demodulate ask only
-int askrawdemod(uint8_t *BinStream, size_t *size, int *clk, int *invert, int maxErr, uint8_t amp)
+void askAmp(uint8_t *BitStream, size_t size)
+{
+       for(size_t i = 1; i<size; i++){
+               if (BitStream[i]-BitStream[i-1]>=30) //large jump up
+                       BitStream[i]=127;
+               else if(BitStream[i]-BitStream[i-1]<=-20) //large jump down
+                       BitStream[i]=-127;
+       }
+       return;
+}
+
+//by marshmellow
+//attempts to demodulate ask modulations, askType == 0 for ask/raw, askType==1 for ask/manchester
+int askdemod(uint8_t *BinStream, size_t *size, int *clk, int *invert, int maxErr, uint8_t amp, uint8_t askType)
 {
        if (*size==0) return -1;
-       int start = DetectASKClock(BinStream, *size, clk, 20); //clock default
-       if (*clk==0 || start < 0) return -1;
+       int start = DetectASKClock(BinStream, *size, clk, maxErr); //clock default
+       if (*clk==0 || start < 0) return -3;
        if (*invert != 1) *invert = 0;
        if (amp==1) askAmp(BinStream, *size);
+       if (g_debugMode==2) prnt("DEBUG: clk %d, beststart %d", *clk, start);
 
        uint8_t initLoopMax = 255;
-       if (initLoopMax > *size) initLoopMax=*size;
+       if (initLoopMax > *size) initLoopMax = *size;
        // Detect high and lows
        //25% clip in case highs and lows aren't clipped [marshmellow]
        int high, low;
        if (getHiLo(BinStream, initLoopMax, &high, &low, 75, 75) < 1) 
-               return -1; //just noise
+               return -2; //just noise
 
+       size_t errCnt = 0;
        // if clean clipped waves detected run alternate demod
-       if (DetectCleanAskWave(BinStream, *size, high, low))
-               return cleanAskRawDemod(BinStream, size, *clk, *invert, high, low);
+       if (DetectCleanAskWave(BinStream, *size, high, low)) {
+               if (g_debugMode==2) prnt("DEBUG: Clean Wave Detected");
+               errCnt = cleanAskRawDemod(BinStream, size, *clk, *invert, high, low);
+               if (askType) //askman
+                       return manrawdecode(BinStream, size, 0);        
+               else //askraw
+                       return errCnt;
+       }
 
-       int lastBit = 0;  //set first clock check - can go negative
-       size_t i, iii = 0;
-       size_t errCnt = 0, bitnum = 0;     //output counter
+       int lastBit;  //set first clock check - can go negative
+       size_t i, bitnum = 0;     //output counter
        uint8_t midBit = 0;
-       size_t bestStart = start, bestErrCnt = 0; //(*size/1000);
-       size_t MaxBits = 1024;
-
-       //if 0 errors allowed then only try first 2 clock cycles as we want a low tolerance
-       if (!maxErr) initLoopMax = *clk * 2; 
-       //if best start not already found by detectclock
-       if (start <= 0 || start > initLoopMax){
-               bestErrCnt = maxErr+1;
-               //PrintAndLog("DEBUG - lastbit - %d",lastBit);
-               //loop to find first wave that works
-               for (iii=0; iii < initLoopMax; ++iii){
-                       if ((BinStream[iii] >= high) || (BinStream[iii] <= low)){
-                               lastBit = iii - *clk;
-                               //loop through to see if this start location works
-                               for (i = iii; i < *size; ++i) {
-                                       if (i-lastBit > *clk && (BinStream[i] >= high || BinStream[i] <= low)){
-                                               lastBit += *clk;
-                                               midBit = 0;
-                                       } else if (i-lastBit > (*clk/2) && midBit == 0) {
-                                               midBit = 1;
-                                       } else if ((i-lastBit) > *clk) {
-                                               //should have hit a high or low based on clock!!
-                                               //PrintAndLog("DEBUG - no wave in expected area - location: %d, expected: %d-%d, lastBit: %d - resetting search",i,(lastBit+(clk-((int)(tol)))),(lastBit+(clk+((int)(tol)))),lastBit);
-                                               errCnt++;
-                                               lastBit += *clk;//skip over until hit too many errors
-                                               if (errCnt > maxErr) 
-                                                       break;
-                                       }
-                                       if ((i-iii)>(MaxBits * *clk)) break; //got enough bits
-                               }
-                               //we got more than 64 good bits and not all errors
-                               if ((((i-iii)/ *clk) > 64) && (errCnt<=maxErr)) {
-                                       //possible good read
-                                       if (errCnt==0){
-                                               bestStart=iii;
-                                               bestErrCnt=errCnt;
-                                               break;  //great read - finish
-                                       } 
-                                       if (errCnt<bestErrCnt){  //set this as new best run
-                                               bestErrCnt=errCnt;
-                                               bestStart = iii;
-                                       }
-                               }
-                               errCnt=0;
-                       }
-               }
-       }
-       if (bestErrCnt > maxErr){
-               *invert = bestStart;
-               *clk = iii;
-               return -1;
-       }
-       //best run is good enough - set to best run and overwrite BinStream
-       lastBit = bestStart - *clk - 1;
-       errCnt = 0;
+       uint8_t tol = 0;  //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave
+       if (*clk <= 32) tol = 1;    //clock tolerance may not be needed anymore currently set to + or - 1 but could be increased for poor waves or removed entirely
+       size_t MaxBits = 3072;
+       lastBit = start - *clk;
 
-       for (i = bestStart; i < *size; ++i) {
-               if (i - lastBit > *clk){
+       for (i = start; i < *size; ++i) {
+               if (i-lastBit >= *clk-tol){
                        if (BinStream[i] >= high) {
                                BinStream[bitnum++] = *invert;
                        } else if (BinStream[i] <= low) {
                                BinStream[bitnum++] = *invert ^ 1;
-                       } else {
+                       } else if (i-lastBit >= *clk+tol) {
                                if (bitnum > 0) {
-                                       BinStream[bitnum++]=77;
+                                       BinStream[bitnum++]=7;
                                        errCnt++;                                               
                                } 
+                       } else { //in tolerance - looking for peak
+                               continue;
                        }
                        midBit = 0;
                        lastBit += *clk;
-               } else if (i-lastBit > (*clk/2) && midBit == 0){
+               } else if (i-lastBit >= (*clk/2-tol) && !midBit && !askType){
                        if (BinStream[i] >= high) {
                                BinStream[bitnum++] = *invert;
                        } else if (BinStream[i] <= low) {
                                BinStream[bitnum++] = *invert ^ 1;
-                       } else {
-
+                       } else if (i-lastBit >= *clk/2+tol) {
                                BinStream[bitnum] = BinStream[bitnum-1];
                                bitnum++;
+                       } else { //in tolerance - looking for peak
+                               continue;
                        }
                        midBit = 1;
                }
@@ -485,6 +338,108 @@ int askrawdemod(uint8_t *BinStream, size_t *size, int *clk, int *invert, int max
        return errCnt;
 }
 
+//by marshmellow
+//take 10 and 01 and manchester decode
+//run through 2 times and take least errCnt
+int manrawdecode(uint8_t * BitStream, size_t *size, uint8_t invert)
+{
+       uint16_t bitnum=0, MaxBits = 512, errCnt = 0;
+       size_t i, ii;
+       uint16_t bestErr = 1000, bestRun = 0;
+       if (*size < 16) return -1;
+       //find correct start position [alignment]
+       for (ii=0;ii<2;++ii){
+               for (i=ii; i<*size-3; i+=2)
+                       if (BitStream[i]==BitStream[i+1])
+                               errCnt++;
+
+               if (bestErr>errCnt){
+                       bestErr=errCnt;
+                       bestRun=ii;
+               }
+               errCnt=0;
+       }
+       //decode
+       for (i=bestRun; i < *size-3; i+=2){
+               if(BitStream[i] == 1 && (BitStream[i+1] == 0)){
+                       BitStream[bitnum++]=invert;
+               } else if((BitStream[i] == 0) && BitStream[i+1] == 1){
+                       BitStream[bitnum++]=invert^1;
+               } else {
+                       BitStream[bitnum++]=7;
+               }
+               if(bitnum>MaxBits) break;
+       }
+       *size=bitnum;
+       return bestErr;
+}
+
+uint32_t manchesterEncode2Bytes(uint16_t datain) {
+       uint32_t output = 0;
+       uint8_t curBit = 0;
+       for (uint8_t i=0; i<16; i++) {
+               curBit = (datain >> (15-i) & 1);
+               output |= (1<<(((15-i)*2)+curBit));
+       }
+       return output;
+}
+
+//by marshmellow
+//encode binary data into binary manchester 
+int ManchesterEncode(uint8_t *BitStream, size_t size)
+{
+       size_t modIdx=20000, i=0;
+       if (size>modIdx) return -1;
+       for (size_t idx=0; idx < size; idx++){
+               BitStream[idx+modIdx++] = BitStream[idx];
+               BitStream[idx+modIdx++] = BitStream[idx]^1;
+       }
+       for (; i<(size*2); i++){
+               BitStream[i] = BitStream[i+20000];
+       }
+       return i;
+}
+
+//by marshmellow
+//take 01 or 10 = 1 and 11 or 00 = 0
+//check for phase errors - should never have 111 or 000 should be 01001011 or 10110100 for 1010
+//decodes biphase or if inverted it is AKA conditional dephase encoding AKA differential manchester encoding
+int BiphaseRawDecode(uint8_t *BitStream, size_t *size, int offset, int invert)
+{
+       uint16_t bitnum = 0;
+       uint16_t errCnt = 0;
+       size_t i = offset;
+       uint16_t MaxBits=512;
+       //if not enough samples - error
+       if (*size < 51) return -1;
+       //check for phase change faults - skip one sample if faulty
+       uint8_t offsetA = 1, offsetB = 1;
+       for (; i<48; i+=2){
+               if (BitStream[i+1]==BitStream[i+2]) offsetA=0; 
+               if (BitStream[i+2]==BitStream[i+3]) offsetB=0;                                  
+       }
+       if (!offsetA && offsetB) offset++;
+       for (i=offset; i<*size-3; i+=2){
+               //check for phase error
+               if (BitStream[i+1]==BitStream[i+2]) {
+                       BitStream[bitnum++]=7;
+                       errCnt++;
+               }
+               if((BitStream[i]==1 && BitStream[i+1]==0) || (BitStream[i]==0 && BitStream[i+1]==1)){
+                       BitStream[bitnum++]=1^invert;
+               } else if((BitStream[i]==0 && BitStream[i+1]==0) || (BitStream[i]==1 && BitStream[i+1]==1)){
+                       BitStream[bitnum++]=invert;
+               } else {
+                       BitStream[bitnum++]=7;
+                       errCnt++;
+               }
+               if(bitnum>MaxBits) break;
+       }
+       *size=bitnum;
+       return errCnt;
+}
+
+// by marshmellow
 // demod gProxIIDemod 
 // error returns as -x 
 // success returns start position in BitStream
@@ -516,19 +471,21 @@ size_t fsk_wave_demod(uint8_t * dest, size_t size, uint8_t fchigh, uint8_t fclow
        if (fclow==0) fclow=8;
        //set the threshold close to 0 (graph) or 128 std to avoid static
        uint8_t threshold_value = 123; 
-
+       size_t preLastSample = 0;
+       size_t LastSample = 0;
+       size_t currSample = 0;
        // sync to first lo-hi transition, and threshold
 
        // Need to threshold first sample
-
-       if(dest[0] < threshold_value) dest[0] = 0;
+       // skip 160 samples to allow antenna/samples to settle
+       if(dest[160] < threshold_value) dest[0] = 0;
        else dest[0] = 1;
 
        size_t numBits = 0;
        // count cycles between consecutive lo-hi transitions, there should be either 8 (fc/8)
        // or 10 (fc/10) cycles but in practice due to noise etc we may end up with with anywhere
        // between 7 to 11 cycles so fuzz it by treat anything <9 as 8 and anything else as 10
-       for(idx = 1; idx < size; idx++) {
+       for(idx = 161; idx < size-20; idx++) {
                // threshold current value
 
                if (dest[idx] < threshold_value) dest[idx] = 0;
@@ -536,13 +493,22 @@ size_t fsk_wave_demod(uint8_t * dest, size_t size, uint8_t fchigh, uint8_t fclow
 
                // Check for 0->1 transition
                if (dest[idx-1] < dest[idx]) { // 0 -> 1 transition
-                       if ((idx-last_transition)<(fclow-2)){            //0-5 = garbage noise
+                       preLastSample = LastSample;
+                       LastSample = currSample;
+                       currSample = idx-last_transition;
+                       if (currSample < (fclow-2)){            //0-5 = garbage noise (or 0-3)
                                //do nothing with extra garbage
-                       } else if ((idx-last_transition) < (fchigh-1)) { //6-8 = 8 waves
+                       } else if (currSample < (fchigh-1)) { //6-8 = 8 sample waves  or 3-6 = 5
+                               if (LastSample > (fchigh-2) && (preLastSample < (fchigh-1) || preLastSample     == 0 )){
+                                       dest[numBits-1]=1;  //correct previous 9 wave surrounded by 8 waves
+                               }
                                dest[numBits++]=1;
-                       } else if ((idx-last_transition) > (fchigh+1) && !numBits) { //12 + and first bit = garbage 
+
+                       } else if (currSample > (fchigh) && !numBits) { //12 + and first bit = garbage 
                                //do nothing with beginning garbage
-                       } else {                                         //9+ = 10 waves
+                       } else if (currSample == (fclow+1) && LastSample == (fclow-1)) { // had a 7 then a 9 should be two 8's
+                               dest[numBits++]=1;
+                       } else {                                         //9+ = 10 sample waves
                                dest[numBits++]=0;
                        }
                        last_transition = idx;
@@ -565,19 +531,8 @@ size_t aggregate_bits(uint8_t *dest, size_t size, uint8_t rfLen,
                
                //if lastval was 1, we have a 1->0 crossing
                if (dest[idx-1]==1) {
-                       if (!numBits && n < rfLen/fclow) {
-                               n=0;
-                               lastval = dest[idx];
-                               continue;
-                       }
                        n = (n * fclow + rfLen/2) / rfLen;
                } else {// 0->1 crossing 
-                       //test first bitsample too small
-                       if (!numBits && n < rfLen/fchigh) {
-                               n=0;
-                               lastval = dest[idx];
-                               continue;
-                       }
                        n = (n * fchigh + rfLen/2) / rfLen; 
                }
                if (n == 0) n = 1;
@@ -599,6 +554,7 @@ size_t aggregate_bits(uint8_t *dest, size_t size, uint8_t rfLen,
        }
        return numBits;
 }
+
 //by marshmellow  (from holiman's base)
 // full fsk demod from GraphBuffer wave to decoded 1s and 0s (no mandemod)
 int fskdemod(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t invert, uint8_t fchigh, uint8_t fclow)
@@ -673,17 +629,6 @@ int ParadoxdemodFSK(uint8_t *dest, size_t *size, uint32_t *hi2, uint32_t *hi, ui
        return (int)startIdx;
 }
 
-uint32_t bytebits_to_byte(uint8_t* src, size_t numbits)
-{
-       uint32_t num = 0;
-       for(int i = 0 ; i < numbits ; i++)
-       {
-               num = (num << 1) | (*src);
-               src++;
-       }
-       return num;
-}
-
 int IOdemodFSK(uint8_t *dest, size_t size)
 {
        if (justNoise(dest, size)) return -1;
@@ -715,26 +660,37 @@ int IOdemodFSK(uint8_t *dest, size_t size)
 }
 
 // by marshmellow
-// takes a array of binary values, start position, length of bits per parity (includes parity bit),
-//   Parity Type (1 for odd 0 for even), and binary Length (length to run) 
-size_t removeParity(uint8_t *BitStream, size_t startIdx, uint8_t pLen, uint8_t pType, size_t bLen)
+// find viking preamble 0xF200 in already demoded data
+int VikingDemod_AM(uint8_t *dest, size_t *size) {
+       //make sure buffer has data
+       if (*size < 64*2) return -2;
+
+       size_t startIdx = 0;
+       uint8_t preamble[] = {1,1,1,1,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+       uint8_t errChk = preambleSearch(dest, preamble, sizeof(preamble), size, &startIdx);
+       if (errChk == 0) return -4; //preamble not found
+       uint32_t checkCalc = bytebits_to_byte(dest+startIdx,8) ^ bytebits_to_byte(dest+startIdx+8,8) ^ bytebits_to_byte(dest+startIdx+16,8)
+           ^ bytebits_to_byte(dest+startIdx+24,8) ^ bytebits_to_byte(dest+startIdx+32,8) ^ bytebits_to_byte(dest+startIdx+40,8) 
+           ^ bytebits_to_byte(dest+startIdx+48,8) ^ bytebits_to_byte(dest+startIdx+56,8);
+       if ( checkCalc != 0xA8 ) return -5;
+       if (*size != 64) return -6;
+       //return start position
+       return (int) startIdx;
+}
+
+// Ask/Biphase Demod then try to locate an ISO 11784/85 ID
+// BitStream must contain previously askrawdemod and biphasedemoded data
+int FDXBdemodBI(uint8_t *dest, size_t *size)
 {
-       uint32_t parityWd = 0;
-       size_t j = 0, bitCnt = 0;
-       for (int word = 0; word < (bLen); word+=pLen){
-               for (int bit=0; bit < pLen; bit++){
-                       parityWd = (parityWd << 1) | BitStream[startIdx+word+bit];
-                       BitStream[j++] = (BitStream[startIdx+word+bit]);
-               }
-               j--;
-               // if parity fails then return 0
-               if (parityTest(parityWd, pLen, pType) == 0) return -1;
-               bitCnt+=(pLen-1);
-               parityWd = 0;
-       }
-       // if we got here then all the parities passed
-       //return ID start index and size
-       return bitCnt;
+       //make sure buffer has enough data
+       if (*size < 128) return -1;
+
+       size_t startIdx = 0;
+       uint8_t preamble[] = {0,0,0,0,0,0,0,0,0,0,1};
+
+       uint8_t errChk = preambleSearch(dest, preamble, sizeof(preamble), size, &startIdx);
+       if (errChk == 0) return -2; //preamble not found
+       return (int)startIdx;
 }
 
 // by marshmellow
@@ -759,7 +715,7 @@ int AWIDdemodFSK(uint8_t *dest, size_t *size)
 }
 
 // by marshmellow
-// FSK Demod then try to locate an Farpointe Data (pyramid) ID
+// FSK Demod then try to locate a Farpointe Data (pyramid) ID
 int PyramiddemodFSK(uint8_t *dest, size_t *size)
 {
        //make sure buffer has data
@@ -780,74 +736,61 @@ int PyramiddemodFSK(uint8_t *dest, size_t *size)
        return (int)startIdx;
 }
 
-
-uint8_t DetectCleanAskWave(uint8_t dest[], size_t size, int high, int low)
+// by marshmellow
+// to detect a wave that has heavily clipped (clean) samples
+uint8_t DetectCleanAskWave(uint8_t dest[], size_t size, uint8_t high, uint8_t low)
 {
-       uint16_t allPeaks=1;
+       bool allArePeaks = true;
        uint16_t cntPeaks=0;
-       size_t loopEnd = 572;
+       size_t loopEnd = 512+160;
        if (loopEnd > size) loopEnd = size;
-       for (size_t i=60; i<loopEnd; i++){
+       for (size_t i=160; i<loopEnd; i++){
                if (dest[i]>low && dest[i]<high) 
-                       allPeaks=0;
+                       allArePeaks = false;
                else
                        cntPeaks++;
        }
-       if (allPeaks == 0){
-               if (cntPeaks > 300) return 1;
+       if (!allArePeaks){
+               if (cntPeaks > 300) return true;
        }
-       return allPeaks;
+       return allArePeaks;
 }
-
 // by marshmellow
 // to help detect clocks on heavily clipped samples
-// based on counts between zero crossings
-int DetectStrongAskClock(uint8_t dest[], size_t size)
+// based on count of low to low
+int DetectStrongAskClock(uint8_t dest[], size_t size, uint8_t high, uint8_t low)
 {
-       int clk[]={0,8,16,32,40,50,64,100,128};
-       size_t idx = 40;
-       uint8_t high=0;
-       size_t cnt = 0;
-       size_t highCnt = 0;
-       size_t highCnt2 = 0;
-       for (;idx < size; idx++){
-               if (dest[idx]>128) {
-                       if (!high){
-                               high=1;
-                               if (cnt > highCnt){
-                                       if (highCnt != 0) highCnt2 = highCnt;
-                                       highCnt = cnt;
-                               } else if (cnt > highCnt2) {
-                                       highCnt2 = cnt;
-                               }
-                               cnt=1;
-                       } else {
-                               cnt++;
-                       }
-               } else if (dest[idx] <= 128){
-                       if (high) {
-                               high=0;
-                               if (cnt > highCnt) {
-                                       if (highCnt != 0) highCnt2 = highCnt;
-                                       highCnt = cnt;
-                               } else if (cnt > highCnt2) {
-                                       highCnt2 = cnt;
-                               }
-                               cnt=1;
-                       } else {
-                               cnt++;
-                       }
-               }
+       uint8_t fndClk[] = {8,16,32,40,50,64,128};
+       size_t startwave;
+       size_t i = 100;
+       size_t minClk = 255;
+               // get to first full low to prime loop and skip incomplete first pulse
+       while ((dest[i] < high) && (i < size))
+               ++i;
+       while ((dest[i] > low) && (i < size))
+               ++i;
+
+       // loop through all samples
+       while (i < size) {
+               // measure from low to low
+               while ((dest[i] > low) && (i < size))
+                       ++i;
+               startwave= i;
+               while ((dest[i] < high) && (i < size))
+                       ++i;
+               while ((dest[i] > low) && (i < size))
+                       ++i;
+               //get minimum measured distance
+               if (i-startwave < minClk && i < size)
+                       minClk = i - startwave;
        }
-       uint8_t tol;
-       for (idx=8; idx>0; idx--){
-               tol = clk[idx]/8;
-               if (clk[idx] >= highCnt - tol && clk[idx] <= highCnt + tol)
-                       return clk[idx];
-               if (clk[idx] >= highCnt2 - tol && clk[idx] <= highCnt2 + tol)
-                       return clk[idx];
+       // set clock
+       if (g_debugMode==2) prnt("DEBUG ASK: detectstrongASKclk smallest wave: %d",minClk);
+       for (uint8_t clkCnt = 0; clkCnt<7; clkCnt++) {
+               if (minClk >= fndClk[clkCnt]-(fndClk[clkCnt]/8) && minClk <= fndClk[clkCnt]+1)
+                       return fndClk[clkCnt];
        }
-       return -1;
+       return 0;
 }
 
 // by marshmellow
@@ -856,26 +799,34 @@ int DetectStrongAskClock(uint8_t dest[], size_t size)
 // return start index of best starting position for that clock and return clock (by reference)
 int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr)
 {
-       size_t i=0;
-       uint8_t clk[]={8,16,32,40,50,64,100,128,255};
+       size_t i=1;
+       uint8_t clk[] = {255,8,16,32,40,50,64,100,128,255};
+       uint8_t clkEnd = 9;
        uint8_t loopCnt = 255;  //don't need to loop through entire array...
-       if (size <= loopCnt) return -1; //not enough samples
-       //if we already have a valid clock quit
-       
-       for (;i<8;++i)
-               if (clk[i] == *clock) return 0;
+       if (size <= loopCnt+60) return -1; //not enough samples
+       size -= 60; //sometimes there is a strange end wave - filter out this....
+       //if we already have a valid clock
+       uint8_t clockFnd=0;
+       for (;i<clkEnd;++i)
+               if (clk[i] == *clock) clockFnd = i;
+               //clock found but continue to find best startpos
 
        //get high and low peak
        int peak, low;
        if (getHiLo(dest, loopCnt, &peak, &low, 75, 75) < 1) return -1;
        
        //test for large clean peaks
-       if (DetectCleanAskWave(dest, size, peak, low)==1){
-               int ans = DetectStrongAskClock(dest, size);
-               for (i=7; i>0; i--){
-                       if (clk[i] == ans) {
-                               *clock = ans;
-                               return 0;
+       if (!clockFnd){
+               if (DetectCleanAskWave(dest, size, peak, low)==1){
+                       int ans = DetectStrongAskClock(dest, size, peak, low);
+                       if (g_debugMode==2) prnt("DEBUG ASK: detectaskclk Clean Ask Wave Detected: clk %d",ans);
+                       for (i=clkEnd-1; i>0; i--){
+                               if (clk[i] == ans) {
+                                       *clock = ans;
+                                       //clockFnd = i;
+                                       return 0;  // for strong waves i don't use the 'best start position' yet...
+                                       //break; //clock found but continue to find best startpos [not yet]
+                               }
                        }
                }
        }
@@ -885,16 +836,24 @@ int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr)
        uint8_t bestStart[]={0,0,0,0,0,0,0,0,0};
        size_t errCnt = 0;
        size_t arrLoc, loopEnd;
+
+       if (clockFnd>0) {
+               clkCnt = clockFnd;
+               clkEnd = clockFnd+1;
+       }
+       else clkCnt=1;
+
        //test each valid clock from smallest to greatest to see which lines up
-       for(clkCnt=0; clkCnt < 8; clkCnt++){
-               if (clk[clkCnt] == 32){
+       for(; clkCnt < clkEnd; clkCnt++){
+               if (clk[clkCnt] <= 32){
                        tol=1;
                }else{
                        tol=0;
                }
-               if (!maxErr) loopCnt=clk[clkCnt]*2;
+               //if no errors allowed - keep start within the first clock
+               if (!maxErr && size > clk[clkCnt]*2 + tol && clk[clkCnt]<128) loopCnt=clk[clkCnt]*2;
                bestErr[clkCnt]=1000;
-               //try lining up the peaks by moving starting point (try first 256)
+               //try lining up the peaks by moving starting point (try first few clocks)
                for (ii=0; ii < loopCnt; ii++){
                        if (dest[ii] < peak && dest[ii] > low) continue;
 
@@ -910,11 +869,11 @@ int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr)
                                        errCnt++;
                                }
                        }
-                       //if we found no errors then we can stop here
+                       //if we found no errors then we can stop here and a low clock (common clocks)
                        //  this is correct one - return this clock
-                                       //PrintAndLog("DEBUG: clk %d, err %d, ii %d, i %d",clk[clkCnt],errCnt,ii,i);
-                       if(errCnt==0 && clkCnt<6) {
-                               *clock = clk[clkCnt];
+                       if (g_debugMode == 2) prnt("DEBUG ASK: clk %d, err %d, startpos %d, endpos %d",clk[clkCnt],errCnt,ii,i);
+                       if(errCnt==0 && clkCnt<7) { 
+                               if (!clockFnd) *clock = clk[clkCnt];
                                return ii;
                        }
                        //if we found errors see if it is lowest so far and save it as best run
@@ -924,9 +883,9 @@ int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr)
                        }
                }
        }
-       uint8_t iii=0;
+       uint8_t iii;
        uint8_t best=0;
-       for (iii=0; iii<8; ++iii){
+       for (iii=1; iii<clkEnd; ++iii){
                if (bestErr[iii] < bestErr[best]){
                        if (bestErr[iii] == 0) bestErr[iii]=1;
                        // current best bit to error ratio     vs  new bit to error ratio
@@ -934,9 +893,9 @@ int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr)
                                best = iii;
                        }
                }
+               if (g_debugMode == 2) prnt("DEBUG ASK: clk %d, # Errors %d, Current Best Clk %d, bestStart %d",clk[iii],bestErr[iii],clk[best],bestStart[best]);
        }
-       if (bestErr[best] > maxErr) return -1;
-       *clock = clk[best];
+       if (!clockFnd) *clock = clk[best];
        return bestStart[best];
 }
 
@@ -948,7 +907,7 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock)
        uint8_t clk[]={255,16,32,40,50,64,100,128,255}; //255 is not a valid clock
        uint16_t loopCnt = 4096;  //don't need to loop through entire array...
        if (size == 0) return 0;
-       if (size<loopCnt) loopCnt = size;
+       if (size<loopCnt) loopCnt = size-20;
 
        //if we already have a valid clock quit
        size_t i=1;
@@ -962,17 +921,17 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock)
        uint16_t peaksdet[]={0,0,0,0,0,0,0,0,0};
        fc = countFC(dest, size, 0);
        if (fc!=2 && fc!=4 && fc!=8) return -1;
-       //PrintAndLog("DEBUG: FC: %d",fc);
+       if (g_debugMode==2) prnt("DEBUG PSK: FC: %d",fc);
 
        //find first full wave
-       for (i=0; i<loopCnt; i++){
+       for (i=160; i<loopCnt; i++){
                if (dest[i] < dest[i+1] && dest[i+1] >= dest[i+2]){
                        if (waveStart == 0) {
                                waveStart = i+1;
-                               //PrintAndLog("DEBUG: waveStart: %d",waveStart);
+                               //prnt("DEBUG: waveStart: %d",waveStart);
                        } else {
                                waveEnd = i+1;
-                               //PrintAndLog("DEBUG: waveEnd: %d",waveEnd);
+                               //prnt("DEBUG: waveEnd: %d",waveEnd);
                                waveLenCnt = waveEnd-waveStart;
                                if (waveLenCnt > fc){
                                        firstFullWave = waveStart;
@@ -983,7 +942,7 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock)
                        }
                }
        }
-       //PrintAndLog("DEBUG: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen);
+       if (g_debugMode ==2) prnt("DEBUG PSK: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen);
        
        //test each valid clock from greatest to smallest to see which lines up
        for(clkCnt=7; clkCnt >= 1 ; clkCnt--){
@@ -991,7 +950,7 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock)
                waveStart = 0;
                errCnt=0;
                peakcnt=0;
-               //PrintAndLog("DEBUG: clk: %d, lastClkBit: %d",clk[clkCnt],lastClkBit);
+               if (g_debugMode == 2) prnt("DEBUG PSK: clk: %d, lastClkBit: %d",clk[clkCnt],lastClkBit);
 
                for (i = firstFullWave+fullWaveLen-1; i < loopCnt-2; i++){
                        //top edge of wave = start of new wave 
@@ -1004,7 +963,7 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock)
                                        waveLenCnt = waveEnd-waveStart;
                                        if (waveLenCnt > fc){ 
                                                //if this wave is a phase shift
-                                               //PrintAndLog("DEBUG: phase shift at: %d, len: %d, nextClk: %d, ii: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+clk[clkCnt]-tol,ii+1,fc);
+                                               if (g_debugMode == 2) prnt("DEBUG PSK: phase shift at: %d, len: %d, nextClk: %d, i: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+clk[clkCnt]-tol,i+1,fc);
                                                if (i+1 >= lastClkBit + clk[clkCnt] - tol){ //should be a clock bit
                                                        peakcnt++;
                                                        lastClkBit+=clk[clkCnt];
@@ -1033,11 +992,40 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock)
                if (peaksdet[i] > peaksdet[best]) {
                        best = i;
                }
-               //PrintAndLog("DEBUG: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[iii],peaksdet[iii],bestErr[iii],clk[best]);
+               if (g_debugMode == 2) prnt("DEBUG PSK: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[i],peaksdet[i],bestErr[i],clk[best]);
        }
        return clk[best];
 }
 
+int DetectStrongNRZClk(uint8_t *dest, size_t size, int peak, int low){
+       //find shortest transition from high to low
+       size_t i = 0;
+       size_t transition1 = 0;
+       int lowestTransition = 255;
+       bool lastWasHigh = false;
+
+       //find first valid beginning of a high or low wave
+       while ((dest[i] >= peak || dest[i] <= low) && (i < size))
+               ++i;
+       while ((dest[i] < peak && dest[i] > low) && (i < size))
+               ++i;
+       lastWasHigh = (dest[i] >= peak);
+
+       if (i==size) return 0;
+       transition1 = i;
+
+       for (;i < size; i++) {
+               if ((dest[i] >= peak && !lastWasHigh) || (dest[i] <= low && lastWasHigh)) {
+                       lastWasHigh = (dest[i] >= peak);
+                       if (i-transition1 < lowestTransition) lowestTransition = i-transition1;
+                       transition1 = i;
+               }
+       }
+       if (lowestTransition == 255) lowestTransition = 0;
+       if (g_debugMode==2) prnt("DEBUG NRZ: detectstrongNRZclk smallest wave: %d",lowestTransition);
+       return lowestTransition;
+}
+
 //by marshmellow
 //detect nrz clock by reading #peaks vs no peaks(or errors)
 int DetectNRZClock(uint8_t dest[], size_t size, int clock)
@@ -1046,8 +1034,7 @@ int DetectNRZClock(uint8_t dest[], size_t size, int clock)
        uint8_t clk[]={8,16,32,40,50,64,100,128,255};
        size_t loopCnt = 4096;  //don't need to loop through entire array...
        if (size == 0) return 0;
-       if (size<loopCnt) loopCnt = size;
-
+       if (size<loopCnt) loopCnt = size-20;
        //if we already have a valid clock quit
        for (; i < 8; ++i)
                if (clk[i] == clock) return clock;
@@ -1056,38 +1043,82 @@ int DetectNRZClock(uint8_t dest[], size_t size, int clock)
        int peak, low;
        if (getHiLo(dest, loopCnt, &peak, &low, 75, 75) < 1) return 0;
 
-       //PrintAndLog("DEBUG: peak: %d, low: %d",peak,low);
+       int lowestTransition = DetectStrongNRZClk(dest, size-20, peak, low);
        size_t ii;
        uint8_t clkCnt;
        uint8_t tol = 0;
-       uint16_t peakcnt=0;
-       uint16_t peaksdet[]={0,0,0,0,0,0,0,0};
-       uint16_t maxPeak=0;
+       uint16_t smplCnt = 0;
+       int16_t peakcnt = 0;
+       int16_t peaksdet[] = {0,0,0,0,0,0,0,0};
+       uint16_t maxPeak = 255;
+       bool firstpeak = false;
        //test for large clipped waves
        for (i=0; i<loopCnt; i++){
                if (dest[i] >= peak || dest[i] <= low){
-                       peakcnt++;
+                       if (!firstpeak) continue;
+                       smplCnt++;
                } else {
-                       if (peakcnt>0 && maxPeak < peakcnt){
-                               maxPeak = peakcnt;
+                       firstpeak=true;
+                       if (smplCnt > 6 ){
+                               if (maxPeak > smplCnt){
+                                       maxPeak = smplCnt;
+                                       //prnt("maxPk: %d",maxPeak);
+                               }
+                               peakcnt++;
+                               //prnt("maxPk: %d, smplCnt: %d, peakcnt: %d",maxPeak,smplCnt,peakcnt);
+                               smplCnt=0;
                        }
-                       peakcnt=0;
                }
        }
+       bool errBitHigh = 0;
+       bool bitHigh = 0;
+       uint8_t ignoreCnt = 0;
+       uint8_t ignoreWindow = 4;
+       bool lastPeakHigh = 0;
+       int lastBit = 0; 
        peakcnt=0;
        //test each valid clock from smallest to greatest to see which lines up
        for(clkCnt=0; clkCnt < 8; ++clkCnt){
-               //ignore clocks smaller than largest peak
-               if (clk[clkCnt]<maxPeak) continue;
-
+               //ignore clocks smaller than smallest peak
+               if (clk[clkCnt] < maxPeak - (clk[clkCnt]/4)) continue;
                //try lining up the peaks by moving starting point (try first 256)
-               for (ii=0; ii< loopCnt; ++ii){
+               for (ii=20; ii < loopCnt; ++ii){
                        if ((dest[ii] >= peak) || (dest[ii] <= low)){
                                peakcnt=0;
-                               // now that we have the first one lined up test rest of wave array
-                               for (i=0; i < ((int)((size-ii-tol)/clk[clkCnt])-1); ++i){
-                                       if (dest[ii+(i*clk[clkCnt])]>=peak || dest[ii+(i*clk[clkCnt])]<=low){
+                               bitHigh = false;
+                               ignoreCnt = 0;
+                               lastBit = ii-clk[clkCnt]; 
+                               //loop through to see if this start location works
+                               for (i = ii; i < size-20; ++i) {
+                                       //if we are at a clock bit
+                                       if ((i >= lastBit + clk[clkCnt] - tol) && (i <= lastBit + clk[clkCnt] + tol)) {
+                                               //test high/low
+                                               if (dest[i] >= peak || dest[i] <= low) {
+                                                       //if same peak don't count it
+                                                       if ((dest[i] >= peak && !lastPeakHigh) || (dest[i] <= low && lastPeakHigh)) {
                                                peakcnt++;
+                                                       }
+                                                       lastPeakHigh = (dest[i] >= peak);
+                                                       bitHigh = true;
+                                                       errBitHigh = false;
+                                                       ignoreCnt = ignoreWindow;
+                                                       lastBit += clk[clkCnt];
+                                               } else if (i == lastBit + clk[clkCnt] + tol) {
+                                                       lastBit += clk[clkCnt];
+                                               }
+                                       //else if not a clock bit and no peaks
+                                       } else if (dest[i] < peak && dest[i] > low){
+                                               if (ignoreCnt==0){
+                                                       bitHigh=false;
+                                                       if (errBitHigh==true) peakcnt--;
+                                                       errBitHigh=false;
+                                               } else {
+                                                       ignoreCnt--;
+                                               }
+                                               // else if not a clock bit but we have a peak
+                                       } else if ((dest[i]>=peak || dest[i]<=low) && (!bitHigh)) {
+                                               //error bar found no clock...
+                                               errBitHigh=true;
                                        }
                                }
                                if(peakcnt>peaksdet[clkCnt]) {
@@ -1099,11 +1130,16 @@ int DetectNRZClock(uint8_t dest[], size_t size, int clock)
        int iii=7;
        uint8_t best=0;
        for (iii=7; iii > 0; iii--){
-               if (peaksdet[iii] > peaksdet[best]){
+               if ((peaksdet[iii] >= (peaksdet[best]-1)) && (peaksdet[iii] <= peaksdet[best]+1) && lowestTransition) {
+                       if (clk[iii] > (lowestTransition - (clk[iii]/8)) && clk[iii] < (lowestTransition + (clk[iii]/8))) {
+                       best = iii;
+               }
+               } else if (peaksdet[iii] > peaksdet[best]){
                        best = iii;
                }
-               //PrintAndLog("DEBUG: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[iii],peaksdet[iii],bestErr[iii],clk[best]);
+               if (g_debugMode==2) prnt("DEBUG NRZ: Clk: %d, peaks: %d, maxPeak: %d, bestClk: %d, lowestTrs: %d",clk[iii],peaksdet[iii],maxPeak, clk[best], lowestTransition);
        }
+
        return clk[best];
 }
 
@@ -1115,7 +1151,7 @@ void psk1TOpsk2(uint8_t *BitStream, size_t size)
        size_t i=1;
        uint8_t lastBit=BitStream[0];
        for (; i<size; i++){
-               if (BitStream[i]==77){
+               if (BitStream[i]==7){
                        //ignore errors
                } else if (lastBit!=BitStream[i]){
                        lastBit=BitStream[i];
@@ -1147,182 +1183,53 @@ void psk2TOpsk1(uint8_t *BitStream, size_t size)
 int indala26decode(uint8_t *bitStream, size_t *size, uint8_t *invert)
 {
        //26 bit 40134 format  (don't know other formats)
-       int i;
-       int long_wait=29;//29 leading zeros in format
-       int start;
-       int first = 0;
-       int first2 = 0;
-       int bitCnt = 0;
-       int ii;
-       // Finding the start of a UID
-       for (start = 0; start <= *size - 250; start++) {
-               first = bitStream[start];
-               for (i = start; i < start + long_wait; i++) {
-                       if (bitStream[i] != first) {
-                               break;
-                       }
-               }
-               if (i == (start + long_wait)) {
-                       break;
-               }
-       }
-       if (start == *size - 250 + 1) {
-               // did not find start sequence
-               return -1;
-       }
-       // Inverting signal if needed
-       if (first == 1) {
-               for (i = start; i < *size; i++) {
-                       bitStream[i] = !bitStream[i];
-               }
-               *invert = 1;
-       }else *invert=0;
-
-       int iii;
-       //found start once now test length by finding next one
-       for (ii=start+29; ii <= *size - 250; ii++) {
-               first2 = bitStream[ii];
-               for (iii = ii; iii < ii + long_wait; iii++) {
-                       if (bitStream[iii] != first2) {
-                               break;
-                       }
-               }
-               if (iii == (ii + long_wait)) {
-                       break;
-               }
-       }
-       if (ii== *size - 250 + 1){
-               // did not find second start sequence
-               return -2;
-       }
-       bitCnt=ii-start;
+       uint8_t preamble[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1};
+       uint8_t preamble_i[] = {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0};
+       size_t startidx = 0; 
+       if (!preambleSearch(bitStream, preamble, sizeof(preamble), size, &startidx)){
+               // if didn't find preamble try again inverting
+               if (!preambleSearch(bitStream, preamble_i, sizeof(preamble_i), size, &startidx)) return -1;
+               *invert ^= 1;
+       } 
+       if (*size != 64 && *size != 224) return -2;
+       if (*invert==1)
+               for (size_t i = startidx; i < *size; i++)
+                       bitStream[i] ^= 1;
 
-       // Dumping UID
-       i = start;
-       for (ii = 0; ii < bitCnt; ii++) {
-               bitStream[ii] = bitStream[i++];
-       }
-       *size=bitCnt;
-       return 1;
+       return (int) startidx;
 }
 
-// by marshmellow - demodulate NRZ wave (both similar enough)
+// by marshmellow - demodulate NRZ wave
 // peaks invert bit (high=1 low=0) each clock cycle = 1 bit determined by last peak
-// there probably is a much simpler way to do this.... 
-int nrzRawDemod(uint8_t *dest, size_t *size, int *clk, int *invert, int maxErr)
-{
+int nrzRawDemod(uint8_t *dest, size_t *size, int *clk, int *invert){
        if (justNoise(dest, *size)) return -1;
        *clk = DetectNRZClock(dest, *size, *clk);
        if (*clk==0) return -2;
        size_t i, gLen = 4096;
-       if (gLen>*size) gLen = *size;
+       if (gLen>*size) gLen = *size-20;
        int high, low;
        if (getHiLo(dest, gLen, &high, &low, 75, 75) < 1) return -3; //25% fuzz on high 25% fuzz on low
-       int lastBit = 0;  //set first clock check
-       size_t iii = 0, bitnum = 0; //bitnum counter
-       uint16_t errCnt = 0, MaxBits = 1000;
-       size_t bestErrCnt = maxErr+1;
-       size_t bestPeakCnt = 0, bestPeakStart = 0;
-       uint8_t bestFirstPeakHigh=0, firstPeakHigh=0, curBit=0, bitHigh=0, errBitHigh=0;
-       uint8_t tol = 1;  //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave
-       uint16_t peakCnt=0;
-       uint8_t ignoreWindow=4;
-       uint8_t ignoreCnt=ignoreWindow; //in case of noise near peak
-       //loop to find first wave that works - align to clock
-       for (iii=0; iii < gLen; ++iii){
-               if ((dest[iii]>=high) || (dest[iii]<=low)){
-                       if (dest[iii]>=high) firstPeakHigh=1;
-                       else firstPeakHigh=0;
-                       lastBit=iii-*clk;
-                       peakCnt=0;
-                       errCnt=0;
-                       //loop through to see if this start location works
-                       for (i = iii; i < *size; ++i) {
-                               // if we are at a clock bit
-                               if ((i >= lastBit + *clk - tol) && (i <= lastBit + *clk + tol)) {
-                                       //test high/low
-                                       if (dest[i] >= high || dest[i] <= low) {
-                                               bitHigh = 1;
-                                               peakCnt++;
-                                               errBitHigh = 0;
-                                               ignoreCnt = ignoreWindow;
-                                               lastBit += *clk;
-                                       } else if (i == lastBit + *clk + tol) {
-                                               lastBit += *clk;
-                                       }
-                               //else if no bars found
-                               } else if (dest[i] < high && dest[i] > low){
-                                       if (ignoreCnt==0){
-                                               bitHigh=0;
-                                               if (errBitHigh==1) errCnt++;
-                                               errBitHigh=0;
-                                       } else {
-                                               ignoreCnt--;
-                                       }
-                               } else if ((dest[i]>=high || dest[i]<=low) && (bitHigh==0)) {
-                                       //error bar found no clock...
-                                       errBitHigh=1;
-                               }
-                               if (((i-iii) / *clk)>=MaxBits) break;
-                       }
-                       //we got more than 64 good bits and not all errors
-                       if (((i-iii) / *clk) > 64 && (errCnt <= (maxErr))) {
-                               //possible good read
-                               if (!errCnt || peakCnt > bestPeakCnt){
-                                       bestFirstPeakHigh=firstPeakHigh;
-                                       bestErrCnt = errCnt;
-                                       bestPeakCnt = peakCnt;
-                                       bestPeakStart = iii;
-                                       if (!errCnt) break;  //great read - finish
-                               }
-                       }
-               }
+
+       uint8_t bit=0;
+       //convert wave samples to 1's and 0's
+       for(i=20; i < *size-20; i++){
+               if (dest[i] >= high) bit = 1;
+               if (dest[i] <= low)  bit = 0;
+               dest[i] = bit;
        }
-       //PrintAndLog("DEBUG: bestErrCnt: %d, maxErr: %d, bestStart: %d, bestPeakCnt: %d, bestPeakStart: %d",bestErrCnt,maxErr,bestStart,bestPeakCnt,bestPeakStart);
-       if (bestErrCnt > maxErr) return bestErrCnt;             
-
-       //best run is good enough set to best run and set overwrite BinStream
-       lastBit = bestPeakStart - *clk;
-       memset(dest, bestFirstPeakHigh^1, bestPeakStart / *clk);
-       bitnum += (bestPeakStart / *clk);
-       for (i = bestPeakStart; i < *size; ++i) {
-               // if expecting a clock bit
-               if ((i >= lastBit + *clk - tol) && (i <= lastBit + *clk + tol)) {
-                       // test high/low
-                       if (dest[i] >= high || dest[i] <= low) {
-                               peakCnt++;
-                               bitHigh = 1;
-                               errBitHigh = 0;
-                               ignoreCnt = ignoreWindow;
-                               curBit = *invert;
-                               if (dest[i] >= high) curBit ^= 1;
-                               dest[bitnum++] = curBit;
-                               lastBit += *clk;
-                       //else no bars found in clock area
-                       } else if (i == lastBit + *clk + tol) {
-                               dest[bitnum++] = curBit;
-                               lastBit += *clk;
-                       }
-               //else if no bars found
-               } else if (dest[i] < high && dest[i] > low){
-                       if (ignoreCnt == 0){
-                               bitHigh = 0;
-                               if (errBitHigh == 1){
-                                       dest[bitnum++] = 77;
-                                       errCnt++;
-                               }
-                               errBitHigh=0;
-                       } else {
-                               ignoreCnt--;
-                       }
-               } else if ((dest[i] >= high || dest[i] <= low) && (bitHigh == 0)) {
-                       //error bar found no clock...
-                       errBitHigh=1;
+       //now demod based on clock (rf/32 = 32 1's for one 1 bit, 32 0's for one 0 bit) 
+       size_t lastBit = 0;
+       size_t numBits = 0;
+       for(i=21; i < *size-20; i++) {
+               //if transition detected or large number of same bits - store the passed bits
+               if (dest[i] != dest[i-1] || (i-lastBit) == (10 * *clk)) {
+                       memset(dest+numBits, dest[i-1] ^ *invert, (i - lastBit + (*clk/4)) / *clk);
+                       numBits += (i - lastBit + (*clk/4)) / *clk;
+                       lastBit = i-1;
                }
-               if (bitnum >= MaxBits) break;
        }
-       *size = bitnum;
-       return bestErrCnt;
+       *size = numBits;
+       return 0;
 }
 
 //by marshmellow
@@ -1340,18 +1247,18 @@ uint8_t detectFSKClk(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fc
        size_t i;
        if (size == 0) return 0;
 
-       uint8_t fcTol = (uint8_t)(0.5+(float)(fcHigh-fcLow)/2);
+       uint8_t fcTol = ((fcHigh*100 - fcLow*100)/2 + 50)/100; //(uint8_t)(0.5+(float)(fcHigh-fcLow)/2);
        rfLensFnd=0;
        fcCounter=0;
        rfCounter=0;
        firstBitFnd=0;
        //PrintAndLog("DEBUG: fcTol: %d",fcTol);
-       // prime i to first up transition
-       for (i = 1; i < size-1; i++)
+       // prime i to first peak / up transition
+       for (i = 160; i < size-20; i++)
                if (BitStream[i] > BitStream[i-1] && BitStream[i]>=BitStream[i+1])
                        break;
 
-       for (; i < size-1; i++){
+       for (; i < size-20; i++){
                fcCounter++;
                rfCounter++;
 
@@ -1369,7 +1276,7 @@ uint8_t detectFSKClk(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fc
                        //not the same size as the last wave - start of new bit sequence
                        if (firstBitFnd > 1){ //skip first wave change - probably not a complete bit
                                for (int ii=0; ii<15; ii++){
-                                       if (rfLens[ii] == rfCounter){
+                                       if (rfLens[ii] >= (rfCounter-4) && rfLens[ii] <= (rfCounter+4)){
                                                rfCnts[ii]++;
                                                rfCounter = 0;
                                                break;
@@ -1391,7 +1298,6 @@ uint8_t detectFSKClk(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fc
        uint8_t rfHighest=15, rfHighest2=15, rfHighest3=15;
 
        for (i=0; i<15; i++){
-               //PrintAndLog("DEBUG: RF %d, cnts %d",rfLens[i], rfCnts[i]);
                //get highest 2 RF values  (might need to get more values to compare or compare all?)
                if (rfCnts[i]>rfCnts[rfHighest]){
                        rfHighest3=rfHighest2;
@@ -1403,20 +1309,23 @@ uint8_t detectFSKClk(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fc
                } else if(rfCnts[i]>rfCnts[rfHighest3]){
                        rfHighest3=i;
                }
+               if (g_debugMode==2) prnt("DEBUG FSK: RF %d, cnts %d",rfLens[i], rfCnts[i]);
        }  
        // set allowed clock remainder tolerance to be 1 large field clock length+1 
        //   we could have mistakenly made a 9 a 10 instead of an 8 or visa versa so rfLens could be 1 FC off  
        uint8_t tol1 = fcHigh+1; 
        
-       //PrintAndLog("DEBUG: hightest: 1 %d, 2 %d, 3 %d",rfLens[rfHighest],rfLens[rfHighest2],rfLens[rfHighest3]);
+       if (g_debugMode==2) prnt("DEBUG FSK: most counted rf values: 1 %d, 2 %d, 3 %d",rfLens[rfHighest],rfLens[rfHighest2],rfLens[rfHighest3]);
 
        // loop to find the highest clock that has a remainder less than the tolerance
        //   compare samples counted divided by
+       // test 128 down to 32 (shouldn't be possible to have fc/10 & fc/8 and rf/16 or less)
        int ii=7;
-       for (; ii>=0; ii--){
+       for (; ii>=2; ii--){
                if (rfLens[rfHighest] % clk[ii] < tol1 || rfLens[rfHighest] % clk[ii] > clk[ii]-tol1){
                        if (rfLens[rfHighest2] % clk[ii] < tol1 || rfLens[rfHighest2] % clk[ii] > clk[ii]-tol1){
                                if (rfLens[rfHighest3] % clk[ii] < tol1 || rfLens[rfHighest3] % clk[ii] > clk[ii]-tol1){
+                                       if (g_debugMode==2) prnt("DEBUG FSK: clk %d divides into the 3 most rf values within tolerance",clk[ii]);
                                        break;
                                }
                        }
@@ -1434,8 +1343,8 @@ uint8_t detectFSKClk(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fc
 //mainly used for FSK field clock detection
 uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj)
 {
-       uint8_t fcLens[] = {0,0,0,0,0,0,0,0,0,0};
-       uint16_t fcCnts[] = {0,0,0,0,0,0,0,0,0,0};
+       uint8_t fcLens[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+       uint16_t fcCnts[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
        uint8_t fcLensFnd = 0;
        uint8_t lastFCcnt=0;
        uint8_t fcCounter = 0;
@@ -1443,11 +1352,11 @@ uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj)
        if (size == 0) return 0;
 
        // prime i to first up transition
-       for (i = 1; i < size-1; i++)
+       for (i = 160; i < size-20; i++)
                if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1])
                        break;
 
-       for (; i < size-1; i++){
+       for (; i < size-20; i++){
                if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1]){
                        // new up transition
                        fcCounter++;
@@ -1460,14 +1369,14 @@ uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj)
                        lastFCcnt = fcCounter;
                        }
                        // find which fcLens to save it to:
-                       for (int ii=0; ii<10; ii++){
+                       for (int ii=0; ii<15; ii++){
                                if (fcLens[ii]==fcCounter){
                                        fcCnts[ii]++;
                                        fcCounter=0;
                                        break;
                                }
                        }
-                       if (fcCounter>0 && fcLensFnd<10){
+                       if (fcCounter>0 && fcLensFnd<15){
                                //add new fc length 
                                fcCnts[fcLensFnd]++;
                                fcLens[fcLensFnd++]=fcCounter;
@@ -1479,11 +1388,10 @@ uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj)
                }
        }
        
-       uint8_t best1=9, best2=9, best3=9;
+       uint8_t best1=14, best2=14, best3=14;
        uint16_t maxCnt1=0;
        // go through fclens and find which ones are bigest 2  
-       for (i=0; i<10; i++){
-               // PrintAndLog("DEBUG: FC %d, Cnt %d, Errs %d",fcLens[i],fcCnts[i],errCnt);    
+       for (i=0; i<15; i++){
                // get the 3 best FC values
                if (fcCnts[i]>maxCnt1) {
                        best3=best2;
@@ -1496,7 +1404,9 @@ uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj)
                } else if(fcCnts[i]>fcCnts[best3]){
                        best3=i;
                }
+               if (g_debugMode==2) prnt("DEBUG countfc: FC %u, Cnt %u, best fc: %u, best2 fc: %u",fcLens[i],fcCnts[i],fcLens[best1],fcLens[best2]);
        }
+       if (fcLens[best1]==0) return 0;
        uint8_t fcH=0, fcL=0;
        if (fcLens[best1]>fcLens[best2]){
                fcH=fcLens[best1];
@@ -1505,11 +1415,13 @@ uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj)
                fcH=fcLens[best2];
                fcL=fcLens[best1];
        }
-
+       if ((size-180)/fcH/3 > fcCnts[best1]+fcCnts[best2]) {
+               if (g_debugMode==2) prnt("DEBUG countfc: fc is too large: %u > %u. Not psk or fsk",(size-180)/fcH/3,fcCnts[best1]+fcCnts[best2]);
+               return 0; //lots of waves not psk or fsk
+       }
        // TODO: take top 3 answers and compare to known Field clocks to get top 2
 
        uint16_t fcs = (((uint16_t)fcH)<<8) | fcL;
-       // PrintAndLog("DEBUG: Best %d  best2 %d best3 %d",fcLens[best1],fcLens[best2],fcLens[best3]);
        if (fskAdj) return fcs; 
        return fcLens[best1];
 }
@@ -1522,6 +1434,7 @@ int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert)
        uint16_t loopCnt = 4096;  //don't need to loop through entire array...
        if (*size<loopCnt) loopCnt = *size;
 
+       size_t numBits=0;
        uint8_t curPhase = *invert;
        size_t i, waveStart=1, waveEnd=0, firstFullWave=0, lastClkBit=0;
        uint8_t fc=0, fullWaveLen=0, tol=1;
@@ -1538,7 +1451,7 @@ int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert)
                        waveEnd = i+1;
                        //PrintAndLog("DEBUG: waveEnd: %d",waveEnd);
                        waveLenCnt = waveEnd-waveStart;
-                       if (waveLenCnt > fc && waveStart > fc){ //not first peak and is a large wave 
+                       if (waveLenCnt > fc && waveStart > fc && !(waveLenCnt > fc+2)){ //not first peak and is a large wave but not out of whack
                                lastAvgWaveVal = avgWaveVal/(waveLenCnt);
                                firstFullWave = waveStart;
                                fullWaveLen=waveLenCnt;
@@ -1551,14 +1464,21 @@ int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert)
                }
                avgWaveVal += dest[i+2];
        }
+       if (firstFullWave == 0) {
+               // no phase shift detected - could be all 1's or 0's - doesn't matter where we start
+               // so skip a little to ensure we are past any Start Signal
+               firstFullWave = 160;
+               memset(dest, curPhase, firstFullWave / *clock);
+       } else {
+               memset(dest, curPhase^1, firstFullWave / *clock);
+       }
+       //advance bits
+       numBits += (firstFullWave / *clock);
+       //set start of wave as clock align
+       lastClkBit = firstFullWave;
        //PrintAndLog("DEBUG: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen);  
-       lastClkBit = firstFullWave; //set start of wave as clock align
        //PrintAndLog("DEBUG: clk: %d, lastClkBit: %d", *clock, lastClkBit);
        waveStart = 0;
-       size_t numBits=0;
-       //set skipped bits
-       memset(dest, curPhase^1, firstFullWave / *clock);
-       numBits += (firstFullWave / *clock);
        dest[numBits++] = curPhase; //set first read bit
        for (i = firstFullWave + fullWaveLen - 1; i < *size-3; i++){
                //top edge of wave = start of new wave 
@@ -1583,7 +1503,7 @@ int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert)
                                                //noise after a phase shift - ignore
                                        } else { //phase shift before supposed to based on clock
                                                errCnt++;
-                                               dest[numBits++] = 77;
+                                               dest[numBits++] = 7;
                                        }
                                } else if (i+1 > lastClkBit + *clock + tol + fc){
                                        lastClkBit += *clock; //no phase shift but clock bit
Impressum, Datenschutz