#include "lfdemod.h"
#include "lfsampling.h"
#include "protocols.h"
-#include "usb_cdc.h" // for usb_poll_validate_length
+#include "usb_cdc.h"
#include "fpgaloader.h"
/**
/*
// Original Timings for reference
+//note startgap must be sent after tag has been powered up for more than 3ms (per T5557 ds)
#define START_GAP 31*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (or 15fc)
#define WRITE_GAP 20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (or 10fc)
#define WRITE_0 18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc)
#define WRITE_1 50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc) 432 for T55x7; 448 for E5550
+#define READ_GAP 15*8
*/
/* Q5 timing datasheet:
* Write_0 Fast Mode | 8*8 | 12*8 | 16*8 |
* Write_1 Fast Mode | 24*8 | 28*8 | 32*8 |
*/
-/*
-//note startgap must be sent after tag has been powered up for more than 3ms (per T5557 ds)
-#define START_GAP 31*8 //31*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (or 15fc) - T5557: 10*8 to 50*8
-#define WRITE_GAP 20*8 //20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (or 10fc) - T5557: 8*8 to 30*8 typ 50-150us
-#define WRITE_0 18*8 //18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc) - T5557: 16*8 to 31*8 typ 24*8
-#define WRITE_1 50*8 //50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc) - T5557: 48*8 to 63*8 typ 54*8 432 for T55x7; 448 for E5550
-
-#define READ_GAP 15*8
-*/
// Structure to hold Timing values. In future will be simplier to add user changable timings.
typedef struct {
#define T55xx_DLMode_Fixed 0 // Default Mode
#define T55xx_DLMode_LLR 1 // Long Leading Reference
#define T55xx_DLMode_Leading0 2 // Leading Zero
-#define T55xx_DLMode_1of4 3 // 1 of 4
+#define T55xx_DLMode_1of4 3 // 1 of 4
#define T55xx_LongLeadingReference 4 // Value to tell Write Bit to send long reference
// Macro for code readability
#define BitStream_Byte(X) ((X) >> 3)
void T55xxWriteBit(int bit, T55xx_Timing *Timings) {
// If bit = 4 Send Long Leading Reference which is 138 + WRITE_0
- // Dbprintf ("Bits : %d",bit);
+ // Dbprintf ("Bits : %d",bit);
switch (bit){
case 0 : TurnReadLFOn(Timings->WRITE_0); break; // Send bit 0/00
case 1 : TurnReadLFOn(Timings->WRITE_1); break; // Send bit 1/01
case 2 : TurnReadLFOn(Timings->WRITE_2); break; // Send bits 10
- case 3 : TurnReadLFOn(Timings->WRITE_3); break; // Send bits 11
- case 4 : TurnReadLFOn(Timings->WRITE_0 + (136 * 8)); break; // Send Long Leading Reference
- }
+ case 3 : TurnReadLFOn(Timings->WRITE_3); break; // Send bits 11
+ case 4 : TurnReadLFOn(Timings->WRITE_0 + (136 * 8)); break; // Send Long Leading Reference
+ }
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
WaitUS(Timings->WRITE_GAP);
}
//int T55xx_SetBits (uint8_t *bit_array, int start_offset, uint32_t data , int num_bits, int max_len)
int T55xx_SetBits (uint8_t *BitStream, uint8_t start_offset, uint32_t data , uint8_t num_bits, uint8_t max_len)
{
- int8_t offset;
- int8_t NextOffset = start_offset;
-
- // Check if data will fit.
- if ((start_offset + num_bits) <= (max_len*8)) {
- // Loop through the data and store
- for (offset = (num_bits-1); offset >= 0; offset--) {
-
- if ((data >> offset) & 1) BitStream[BitStream_Byte(NextOffset)] |= (1 << BitStream_Bit(NextOffset)); // Set the bit to 1
- else BitStream[BitStream_Byte(NextOffset)] &= (0xff ^ (1 << BitStream_Bit(NextOffset))); // Set the bit to 0
-
- NextOffset++;
- }
- }
- else{
- // Note: This should never happen unless some code changes cause it.
- // So short message for coders when testing.
- Dbprintf ("T55 too many bits");
- }
- return NextOffset;
+ int8_t offset;
+ int8_t NextOffset = start_offset;
+
+ // Check if data will fit.
+ if ((start_offset + num_bits) <= (max_len*8)) {
+ // Loop through the data and store
+ for (offset = (num_bits-1); offset >= 0; offset--) {
+
+ if ((data >> offset) & 1) BitStream[BitStream_Byte(NextOffset)] |= (1 << BitStream_Bit(NextOffset)); // Set the bit to 1
+ else BitStream[BitStream_Byte(NextOffset)] &= (0xff ^ (1 << BitStream_Bit(NextOffset))); // Set the bit to 0
+
+ NextOffset++;
+ }
+ }
+ else {
+ // Note: This should never happen unless some code changes cause it.
+ // So short message for coders when testing.
+ Dbprintf ("T55 too many bits");
+ }
+ return NextOffset;
}
// Send one downlink command to the card
void T55xx_SendCMD (uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
-
+
/*
arg bits
xxxxxxx1 0x01 PwdMode
xx1xxxxx 0x20 !reg_readmode
x1xxxxxx 0x40 called for a read, so no data packet
1xxxxxxx 0x80 reset
-
+
*/
- bool PwdMode = ((arg & 0x01) == 0x01);
- bool Page = (arg & 0x02);
- bool testMode = ((arg & 0x04) == 0x04);
- uint8_t downlink_mode = (arg >> 3) & 0x03;
- bool reg_readmode = ((arg & 0x20) == 0x20);
- bool read_cmd = ((arg & 0x40) == 0x40);
- bool reset = (arg & 0x80);
-
- uint8_t i = 0;
+ bool PwdMode = ((arg & 0x01) == 0x01);
+ bool Page = (arg & 0x02);
+ bool testMode = ((arg & 0x04) == 0x04);
+ uint8_t downlink_mode = (arg >> 3) & 0x03;
+ bool reg_readmode = ((arg & 0x20) == 0x20);
+ bool read_cmd = ((arg & 0x40) == 0x40);
+ bool reset = (arg & 0x80);
+
+ uint8_t i = 0;
uint8_t BitStream[10]; // Max Downlink Command size ~74 bits, so 10 bytes (80 bits)
uint8_t BitStreamLen;
T55xx_Timing *Timing;
uint8_t SendBits;
-
+
// Assigning Downlink Timeing for write
switch (downlink_mode)
{
case T55xx_DLMode_Fixed : Timing = &T55xx_Timing_FixedBit; break;
- case T55xx_DLMode_LLR : Timing = &T55xx_Timing_LLR; break;
+ case T55xx_DLMode_LLR : Timing = &T55xx_Timing_LLR; break;
case T55xx_DLMode_Leading0 : Timing = &T55xx_Timing_Leading0; break;
case T55xx_DLMode_1of4 : Timing = &T55xx_Timing_1of4; break;
default:
Timing = &T55xx_Timing_FixedBit;
- }
+ }
// Build Bit Stream to send.
memset (BitStream,0x00,sizeof(BitStream));
- BitStreamLen = 0;
+ BitStreamLen = 0; // Ensure 0 bit index to start.
// Add Leading 0 and 1 of 4 reference bit
- if ((downlink_mode == T55xx_DLMode_Leading0) || (downlink_mode == T55xx_DLMode_1of4))
+ if ((downlink_mode == T55xx_DLMode_Leading0) || (downlink_mode == T55xx_DLMode_1of4))
BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream));
// Add extra reference 0 for 1 of 4
- if (downlink_mode == T55xx_DLMode_1of4)
+ if (downlink_mode == T55xx_DLMode_1of4)
BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream));
// Add Opcode
- if (reset) {
- // Reset : r*) 00
- BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 2,sizeof(BitStream));
- }
- else
- {
- if (testMode) Dbprintf("TestMODE");
- BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen,testMode ? 0 : 1 , 1,sizeof(BitStream));
- BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen,testMode ? 1 : Page , 1,sizeof(BitStream));
-
- if (PwdMode) {
- // Leading 0 and 1 of 4 00 fixed bits if passsword used
- if ((downlink_mode == T55xx_DLMode_Leading0) || (downlink_mode == T55xx_DLMode_1of4)) {
- BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 2,sizeof(BitStream));
- }
- BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Pwd, 32,sizeof(BitStream));
- }
-
- // Add Lock bit 0
- if (!reg_readmode) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream));
-
- // Add Data if a write command
- if (!read_cmd) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Data, 32,sizeof(BitStream));
-
- // Add Address
- if (!reg_readmode) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Block, 3,sizeof(BitStream));
- }
-
+ if (reset) {
+ // Reset : r*) 00
+ BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 2,sizeof(BitStream));
+ }
+ else
+ {
+ if (testMode) Dbprintf("TestMODE");
+ BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen,testMode ? 0 : 1 , 1,sizeof(BitStream));
+ BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen,testMode ? 1 : Page , 1,sizeof(BitStream));
+
+ if (PwdMode) {
+ // Leading 0 and 1 of 4 00 fixed bits if passsword used
+ if ((downlink_mode == T55xx_DLMode_Leading0) || (downlink_mode == T55xx_DLMode_1of4)) {
+ BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 2,sizeof(BitStream));
+ }
+ BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Pwd, 32,sizeof(BitStream));
+ }
+
+ // Add Lock bit 0
+ if (!reg_readmode) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream));
+
+ // Add Data if a write command
+ if (!read_cmd) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Data, 32,sizeof(BitStream));
+
+ // Add Address
+ if (!reg_readmode) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Block, 3,sizeof(BitStream));
+ }
+
// Send Bits to T55xx
// Set up FPGA, 125kHz
LFSetupFPGAForADC(95, true);
if (downlink_mode == T55xx_DLMode_LLR)
T55xxWriteBit (T55xx_LongLeadingReference,Timing); // Send Long Leading Start Reference
- if (downlink_mode == T55xx_DLMode_1of4) { // 1 of 4 need to send 2 bits at a time
- for ( i = 0; i < BitStreamLen; i+=2 ) {
+ if ((downlink_mode == T55xx_DLMode_1of4) && (BitStreamLen > 0)) { // 1 of 4 need to send 2 bits at a time
+ for ( i = 0; i < BitStreamLen-1; i+=2 ) {
SendBits = (BitStream[BitStream_Byte(i )] >> (BitStream_Bit(i )) & 1) << 1; // Bit i
- SendBits += (BitStream[BitStream_Byte(i+1)] >> (BitStream_Bit(i+1)) & 1); // Bit i+1;
+ SendBits += (BitStream[BitStream_Byte(i+1)] >> (BitStream_Bit(i+1)) & 1); // Bit i+1;
T55xxWriteBit (SendBits & 3,Timing);
}
}
else {
for (i = 0; i < BitStreamLen; i++) {
- SendBits = (BitStream[BitStream_Byte(i)] >> BitStream_Bit(i));
+ SendBits = (BitStream[BitStream_Byte(i)] >> BitStream_Bit(i));
T55xxWriteBit (SendBits & 1,Timing);
- }
+ }
}
}
void T55xxResetRead(void) {
LED_A_ON();
- // send r* 00
- uint8_t arg = 0x80; // SendCMD will add correct reference mode based on flags (when added).
+ // send r* 00
+ uint8_t arg = 0x80; // SendCMD will add correct reference mode based on flags (when added).
+
+ // Add in downlink_mode when ready
+ // arg |= 0x00; // dlmode << 3 (00 default - 08 leading 0 - 10 Fixed - 18 1 of 4 )
- // Add in downlink_mode when ready
- // arg |= 0x00; // dlmode << 3 (00 default - 08 leading 0 - 10 Fixed - 18 1 of 4 )
+ //clear buffer now so it does not interfere with timing later
+ BigBuf_Clear_keep_EM();
T55xx_SendCMD (0, 0, 0, arg); //, true);
+ TurnReadLFOn(T55xx_Timing_FixedBit.READ_GAP);
+
// Acquisition
DoPartialAcquisition(0, true, BigBuf_max_traceLen(), 0);
1xxxxxxx 0x80 reset
*/
- bool testMode = ((arg & 0x04) == 0x04);
+ bool testMode = ((arg & 0x04) == 0x04);
arg &= (0xff ^ 0x40); // Called for a write, so ensure it is clear/0
LED_A_ON ();
}
// turn field off
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-
+
cmd_send(CMD_ACK,0,0,0,0,0);
LED_A_OFF ();
// Read one card block in page [page]
void T55xxReadBlock (uint16_t arg0, uint8_t Block, uint32_t Pwd) {//, struct T55xx_Timing *Timing) {
-
+
LED_A_ON();
/*
x1xxxxxx 0x40 called for a read, so no data packet
1xxxxxxx 0x80 reset
*/
-
+
// Set Read Flag to ensure SendCMD does not add "data" to the packet
arg0 |= 0x40;
- // RegRead Mode true of block 0xff
+ // RegRead Mode true of block 0xff
if (Block == 0xff) arg0 |= 0x20;
//make sure block is at max 7
//clear buffer now so it does not interfere with timing later
BigBuf_Clear_ext(false);
-
+
T55xx_SendCMD (0, Block, Pwd, arg0); //, true);
// Turn field on to read the response
x1xxxxxx 0x40 called for a read, so no data packet
1xxxxxxx 0x80 reset
*/
-
- // r* 10 (00) <pwd> r* for llr , L0 and 1/4 - (00) for L0 and 1/4 - All handled in SendCMD
- // So, default Opcode 10 and pwd.
- uint8_t arg = 0x01 | 0x40 | 0x20; //Password Read Call no data | reg_read no block
-
- // Add in downlink_mode when ready
- // arg |= 0x00; // dlmode << 3 (00 default - 08 leading 0 - 10 Fixed - 18 1 of 4 )
+
+
// r* 10 (00) <pwd> r* for llr , L0 and 1/4 - (00) for L0 and 1/4 - All handled in SendCMD
+ // So, default Opcode 10 and pwd.
+ uint8_t arg = 0x01 | 0x40 | 0x20; //Password Read Call no data | reg_read no block
+
+ // Add in downlink_mode when ready
+ // arg |= 0x00; // dlmode << 3 (00 default - 08 leading 0 - 10 Fixed - 18 1 of 4 )
T55xx_SendCMD (0, 0, Pwd, arg); //, true);
void WriteT55xx(uint32_t *blockdata, uint8_t startblock, uint8_t numblocks) {
// write last block first and config block last (if included)
for (uint8_t i = numblocks+startblock; i > startblock; i--) {
- T55xxWriteBlock(blockdata[i-1],i-1,0,0);//,false); //,&T55xx_Timing_FixedBit);
- // T55xx_SendCMD (blockdata[i-1],i-1,0,0);//,false); //,&T55xx_Timing_FixedBit);
+ T55xxWriteBlock(blockdata[i-1],i-1,0,0);//,false); //,&T55xx_Timing_FixedBit);
+ //T55xx_SendCMD (blockdata[i-1],i-1,0,0);//,false); //,&T55xx_Timing_FixedBit);
}
}
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
WaitUS(18*8); //18 cycles on (8us each)
- // now start writting
+ // now start writting - each bit should be 32*8 total length
while(fwd_bit_sz-- > 0) { //prepare next bit modulation
if(((*fwd_write_ptr++) & 1) == 1)
WaitUS(32*8); //32 cycles at 125Khz (8us each)
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
WaitUS(23*8); //23 cycles off (8us each)
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
- WaitUS(18*8); //18 cycles on (8us each)
+ WaitUS((32-23)*8); //remaining cycles on (8us each)
}
}
}
projects / proxmark3-svn / blobdiff