#include "apps.h"
#include "util.h"
#include "string.h"
-
#include "iso14443crc.h"
-
-#define RECEIVE_SAMPLES_TIMEOUT 0x0004FFFF
+#include "common.h"
+#define RECEIVE_SAMPLES_TIMEOUT 600000
#define ISO14443B_DMA_BUFFER_SIZE 256
-uint8_t PowerOn = TRUE;
+
// PCB Block number for APDUs
static uint8_t pcb_blocknum = 0;
Uart.state = STATE_UNSYNCD;
Uart.byteCnt = 0;
Uart.bitCnt = 0;
+ Uart.posCnt = 0;
memset(Uart.output, 0x00, MAX_FRAME_SIZE);
}
// response to HLTB and ATTRIB
static const uint8_t response2[] = {0x00, 0x78, 0xF0};
- uint8_t parity[MAX_PARITY_SIZE];
+ uint8_t parity[MAX_PARITY_SIZE] = {0x00};
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
for(;;) {
- if(!GetIso14443bCommandFromReader(receivedCmd, &len)) {
- Dbprintf("button pressed, received %d commands", cmdsRecvd);
- break;
+ if (!GetIso14443bCommandFromReader(receivedCmd, &len)) {
+ Dbprintf("button pressed, received %d commands", cmdsRecvd);
+ break;
}
- if (tracing) {
- LogTrace(receivedCmd, len, 0, 0, parity, TRUE);
- }
+ LogTrace(receivedCmd, len, 0, 0, parity, TRUE);
// Good, look at the command now.
if ( (len == sizeof(cmd1) && memcmp(receivedCmd, cmd1, len) == 0)
// And print whether the CRC fails, just for good measure
uint8_t b1, b2;
if (len >= 3){ // if crc exists
- ComputeCrc14443(CRC_14443_B, receivedCmd, len-2, &b1, &b2);
- if(b1 != receivedCmd[len-2] || b2 != receivedCmd[len-1]) {
- // Not so good, try again.
- DbpString("+++CRC fail");
-
- } else {
- DbpString("CRC passes");
- }
+ ComputeCrc14443(CRC_14443_B, receivedCmd, len-2, &b1, &b2);
+ if(b1 != receivedCmd[len-2] || b2 != receivedCmd[len-1]) {
+ // Not so good, try again.
+ DbpString("+++CRC fail");
+
+ } else {
+ DbpString("CRC passes");
+ }
}
//get rid of compiler warning
respCodeLen = 0;
AT91C_BASE_SSC->SSC_THR = respCode[i++];
FpgaSendQueueDelay = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
}
- if(BUTTON_PRESS()) break;
+ if(BUTTON_PRESS()) break;
}
// Ensure that the FPGA Delay Queue is empty before we switch to TAGSIM_LISTEN again:
}
}
- // trace the response:
- if (tracing) LogTrace(resp, respLen, 0, 0, parity, FALSE);
+ LogTrace(resp, respLen, 0, 0, parity, FALSE);
}
FpgaDisableSscDma();
+ set_tracing(FALSE);
}
//=============================================================================
* false if we are still waiting for some more
*
*/
+ #define abs(x) ( ((x)<0) ? -(x) : (x) )
static RAMFUNC int Handle14443bSamplesDemod(int ci, int cq)
{
- int v;
+ int v = 0;
+ int ai = abs(ci);
+ int aq = abs(cq);
+ int halfci = (ai >> 1);
+ int halfcq = (aq >> 1);
// The soft decision on the bit uses an estimate of just the
// quadrant of the reference angle, not the exact angle.
#define SUBCARRIER_DETECT_THRESHOLD 8
-// Subcarrier amplitude v = sqrt(ci^2 + cq^2), approximated here by abs(ci) + abs(cq)
-/* #define CHECK_FOR_SUBCARRIER() { \
- v = ci; \
- if(v < 0) v = -v; \
- if(cq > 0) { \
- v += cq; \
- } else { \
- v -= cq; \
- } \
- }
- */
// Subcarrier amplitude v = sqrt(ci^2 + cq^2), approximated here by max(abs(ci),abs(cq)) + 1/2*min(abs(ci),abs(cq)))
#define CHECK_FOR_SUBCARRIER() { \
- if(ci < 0) { \
- if(cq < 0) { /* ci < 0, cq < 0 */ \
- if (cq < ci) { \
- v = -cq - (ci >> 1); \
- } else { \
- v = -ci - (cq >> 1); \
- } \
- } else { /* ci < 0, cq >= 0 */ \
- if (cq < -ci) { \
- v = -ci + (cq >> 1); \
- } else { \
- v = cq - (ci >> 1); \
- } \
- } \
- } else { \
- if(cq < 0) { /* ci >= 0, cq < 0 */ \
- if (-cq < ci) { \
- v = ci - (cq >> 1); \
- } else { \
- v = -cq + (ci >> 1); \
- } \
- } else { /* ci >= 0, cq >= 0 */ \
- if (cq < ci) { \
- v = ci + (cq >> 1); \
- } else { \
- v = cq + (ci >> 1); \
- } \
- } \
- } \
- }
-
+ v = MAX(ai, aq) + MIN(halfci, halfcq); \
+}
+
+
switch(Demod.state) {
case DEMOD_UNSYNCD:
CHECK_FOR_SUBCARRIER();
break;
case DEMOD_PHASE_REF_TRAINING:
- if(Demod.posCount < 10*2) {
+ if(Demod.posCount < 8) {
+ //if(Demod.posCount < 10*2) {
CHECK_FOR_SUBCARRIER();
if (v > SUBCARRIER_DETECT_THRESHOLD) {
// set the reference phase (will code a logic '1') by averaging over 32 1/fs.
case DEMOD_AWAITING_FALLING_EDGE_OF_SOF:
MAKE_SOFT_DECISION();
- if(v < 0) { // logic '0' detected
+ //Dbprintf("ICE: %d %d %d %d %d", v, Demod.sumI, Demod.sumQ, ci, cq );
+ if(v <= 0) { // logic '0' detected
Demod.state = DEMOD_GOT_FALLING_EDGE_OF_SOF;
Demod.posCount = 0; // start of SOF sequence
} else {
- //if(Demod.posCount > 200/4) { // maximum length of TR1 = 200 1/fs
if(Demod.posCount > 25*2) { // maximum length of TR1 = 200 1/fs
Demod.state = DEMOD_UNSYNCD;
}
Demod.len = 0;
Demod.state = DEMOD_UNSYNCD;
Demod.posCount = 0;
+ Demod.sumI = 0;
+ Demod.sumQ = 0;
+ Demod.bitCount = 0;
+ Demod.thisBit = 0;
+ Demod.shiftReg = 0;
memset(Demod.output, 0x00, MAX_FRAME_SIZE);
}
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ);
// The response (tag -> reader) that we're receiving.
- uint8_t *resp = BigBuf_malloc(MAX_FRAME_SIZE);
-
// Set up the demodulator for tag -> reader responses.
- DemodInit(resp);
+ DemodInit(BigBuf_malloc(MAX_FRAME_SIZE));
// The DMA buffer, used to stream samples from the FPGA
int8_t *dmaBuf = (int8_t*) BigBuf_malloc(ISO14443B_DMA_BUFFER_SIZE);
-
+ // Setup and start DMA.
+ FpgaSetupSscDma((uint8_t*) dmaBuf, ISO14443B_DMA_BUFFER_SIZE);
+
int8_t *upTo = dmaBuf;
lastRxCounter = ISO14443B_DMA_BUFFER_SIZE;
// Signal field is ON with the appropriate LED:
LED_D_ON();
-
- // Setup and start DMA.
- FpgaSetupSscDma((uint8_t*) dmaBuf, ISO14443B_DMA_BUFFER_SIZE);
-
-
for(;;) {
int behindBy = lastRxCounter - AT91C_BASE_PDC_SSC->PDC_RCR;
if(behindBy > max) max = behindBy;
}
lastRxCounter -= 2;
if(lastRxCounter <= 0) {
- lastRxCounter += ISO14443B_DMA_BUFFER_SIZE;
+ lastRxCounter = ISO14443B_DMA_BUFFER_SIZE;
}
samples += 2;
- if(Handle14443bSamplesDemod(ci | 0x01 , cq | 0x01)) {
- gotFrame = TRUE;
+ //
+ gotFrame = Handle14443bSamplesDemod(ci , cq );
+ if ( gotFrame )
break;
}
- }
if(samples > n || gotFrame) {
break;
AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;
- if (!quiet && Demod.len == 0) {
- Dbprintf("max behindby = %d, samples = %d, gotFrame = %d, Demod.len = %d, Demod.sumI = %d, Demod.sumQ = %d",
+ if (!quiet) {
+ Dbprintf("max behindby = %d, samples = %d, gotFrame = %s, Demod.len = %d, Demod.sumI = %d, Demod.sumQ = %d",
max,
samples,
- gotFrame,
+ (gotFrame) ? "true" : "false",
Demod.len,
Demod.sumI,
Demod.sumQ
}
//Tracing
- if (tracing && Demod.len > 0) {
- uint8_t parity[MAX_PARITY_SIZE];
+ if (Demod.len > 0) {
+ uint8_t parity[MAX_PARITY_SIZE] = {0x00};
LogTrace(Demod.output, Demod.len, 0, 0, parity, FALSE);
}
}
int c;
FpgaSetupSsc();
-
- // Start the timer
- StartCountSspClk();
while(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
AT91C_BASE_SSC->SSC_THR = 0xff;
// Signal we are transmitting with the Green LED
LED_B_ON();
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX | FPGA_HF_READER_TX_SHALLOW_MOD);
- if ( !PowerOn )
- SpinDelay(200);
for(c = 0; c < 10;) {
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
ToSendReset();
// Establish initial reference level
- for(i = 0; i < 80; i++) {
+ for(i = 0; i < 40; i++) {
ToSendStuffBit(1);
}
// Send SOF
// Set up ISO 14443 Type B communication (similar to iso14443a_setup)
void iso14443b_setup() {
+
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+
BigBuf_free();
// Set up the synchronous serial port
FpgaSetupSsc();
// Signal field is on with the appropriate LED
LED_D_ON();
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX | FPGA_HF_READER_TX_SHALLOW_MOD);
+
+ //SpinDelay(100);
// Start the timer
StartCountSspClk();
if (Demod.len == 0) {
DbpString("No response from tag");
+ set_tracing(FALSE);
return;
} else {
Dbprintf("Randomly generated Chip ID (+ 2 byte CRC): %02x %02x %02x",
GetSamplesFor14443bDemod(RECEIVE_SAMPLES_TIMEOUT, TRUE);
if (Demod.len != 3) {
Dbprintf("Expected 3 bytes from tag, got %d", Demod.len);
+ set_tracing(FALSE);
return;
}
// Check the CRC of the answer:
ComputeCrc14443(CRC_14443_B, Demod.output, 1 , &cmd1[2], &cmd1[3]);
if(cmd1[2] != Demod.output[1] || cmd1[3] != Demod.output[2]) {
DbpString("CRC Error reading select response.");
+ set_tracing(FALSE);
return;
}
// Check response from the tag: should be the same UID as the command we just sent:
if (cmd1[1] != Demod.output[0]) {
Dbprintf("Bad response to SELECT from Tag, aborting: %02x %02x", cmd1[1], Demod.output[0]);
+ set_tracing(FALSE);
return;
}
GetSamplesFor14443bDemod(RECEIVE_SAMPLES_TIMEOUT, TRUE);
if (Demod.len != 10) {
Dbprintf("Expected 10 bytes from tag, got %d", Demod.len);
+ set_tracing(FALSE);
return;
}
// The check the CRC of the answer (use cmd1 as temporary variable):
}
i++;
}
+
+ set_tracing(FALSE);
}
upTo = dmaBuf;
lastRxCounter = ISO14443B_DMA_BUFFER_SIZE;
FpgaSetupSscDma((uint8_t*) dmaBuf, ISO14443B_DMA_BUFFER_SIZE);
- uint8_t parity[MAX_PARITY_SIZE];
+ uint8_t parity[MAX_PARITY_SIZE] = {0x00};
bool TagIsActive = FALSE;
bool ReaderIsActive = FALSE;
Dbprintf("blew circular buffer! behindBy=%d", behindBy);
break;
}
+
if(!tracing) {
- DbpString("Reached trace limit");
+ DbpString("Trace full");
break;
}
+
if(BUTTON_PRESS()) {
DbpString("cancelled");
break;
samples += 2;
if (!TagIsActive) { // no need to try decoding reader data if the tag is sending
- if(Handle14443bUartBit(ci & 0x01)) {
- if(triggered && tracing) {
+ if (Handle14443bUartBit(ci & 0x01)) {
+ if ( triggered)
LogTrace(Uart.output, Uart.byteCnt, samples, samples, parity, TRUE);
+
+ /* And ready to receive another command. */
+ UartReset();
+ /* And also reset the demod code, which might have been */
+ /* false-triggered by the commands from the reader. */
+ DemodReset();
}
- /* And ready to receive another command. */
- UartReset();
- /* And also reset the demod code, which might have been */
- /* false-triggered by the commands from the reader. */
- DemodReset();
- }
- if(Handle14443bUartBit(cq & 0x01)) {
- if(triggered && tracing) {
+ if (Handle14443bUartBit(cq & 0x01)) {
+ if (triggered)
LogTrace(Uart.output, Uart.byteCnt, samples, samples, parity, TRUE);
- }
- /* And ready to receive another command. */
- UartReset();
- /* And also reset the demod code, which might have been */
- /* false-triggered by the commands from the reader. */
- DemodReset();
- }
+
+ /* And ready to receive another command. */
+ UartReset();
+ /* And also reset the demod code, which might have been */
+ /* false-triggered by the commands from the reader. */
+ DemodReset();
+ }
ReaderIsActive = (Uart.state > STATE_GOT_FALLING_EDGE_OF_SOF);
}
if(!ReaderIsActive) { // no need to try decoding tag data if the reader is sending - and we cannot afford the time
// is this | 0x01 the error? & 0xfe in https://github.com/Proxmark/proxmark3/issues/103
- if(Handle14443bSamplesDemod(ci | 0x01, cq | 0x01)) {
+ if(Handle14443bSamplesDemod(ci & 0xfe, cq & 0xfe)) {
- //Use samples as a time measurement
- if(tracing)
- {
- //uint8_t parity[MAX_PARITY_SIZE];
+ //Use samples as a time measurement
LogTrace(Demod.output, Demod.len, samples, samples, parity, FALSE);
- }
- triggered = TRUE;
- // And ready to receive another response.
- DemodReset();
- }
+ triggered = TRUE;
+
+ // And ready to receive another response.
+ DemodReset();
+ }
TagIsActive = (Demod.state > DEMOD_GOT_FALLING_EDGE_OF_SOF);
}
-
}
FpgaDisableSscDma();
LEDsoff();
+
AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;
DbpString("Snoop statistics:");
Dbprintf(" Max behind by: %i", maxBehindBy);
Dbprintf(" Uart ByteCnt: %i", Uart.byteCnt);
Dbprintf(" Uart ByteCntMax: %i", Uart.byteCntMax);
Dbprintf(" Trace length: %i", BigBuf_get_traceLen());
+ set_tracing(FALSE);
}
*/
void SendRawCommand14443B(uint32_t datalen, uint32_t recv, uint8_t powerfield, uint8_t data[])
{
+ // param ISO_
+ // param ISO_CONNECT
+ // param ISO14A_NO_DISCONNECT
+ //if (param & ISO14A_NO_DISCONNECT)
+ // return;
iso14443b_setup();
- FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
- BigBuf_free();
- if ( !PowerOn ){
- FpgaSetupSsc();
- }
- SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
-
- // Start the timer
- StartCountSspClk();
-
- DemodReset();
- UartReset();
if ( datalen == 0 && recv == 0 && powerfield == 0){
- clear_trace();
- } else {
+
+ } else {
set_tracing(TRUE);
CodeAndTransmit14443bAsReader(data, datalen);
}
- if(recv) {
+ if (recv) {
GetSamplesFor14443bDemod(RECEIVE_SAMPLES_TIMEOUT, FALSE);
uint16_t iLen = MIN(Demod.len, USB_CMD_DATA_SIZE);
cmd_send(CMD_ACK, iLen, 0, 0, Demod.output, iLen);
}
- if(!powerfield) {
+ if (!powerfield) {
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
FpgaDisableSscDma();
+ set_tracing(FALSE);
LED_D_OFF();
- PowerOn = 0;
}
}
projects / proxmark3-svn / blobdiff