+ if (sscanf(Cmd, "%u %u", &fc, &cn ) != 2) return usage_lf_awid_sim();
+
+ fcode = (fc & 0x000000FF);
+ cnum = (cn & 0x0000FFFF);
+
+ if (fc != fcode) PrintAndLog("Facility-Code (%u) truncated to 8-bits: %u", fc, fcode);
+ if (cn != cnum) PrintAndLog("Card number (%u) truncated to 16-bits: %u", cn, cnum);
+
+ PrintAndLog("Emulating AWID26 -- FC: %u; CN: %u\n", fcode, cnum);
+ PrintAndLog("Press pm3-button to abort simulation or run another command");
+
+ if (!getAWIDBits(fc, cn, bs)) {
+ PrintAndLog("Error with tag bitstream generation.");
+ return 1;
+ }
+ // AWID uses: fcHigh: 10, fcLow: 8, clk: 50, invert: 0
+ // arg1 --- fcHigh<<8 + fcLow
+ // arg2 --- Inversion and clk setting
+ // 96 --- Bitstream length: 96-bits == 12 bytes
+ UsbCommand c = {CMD_FSK_SIM_TAG, {arg1, arg2, size}};
+ memcpy(c.d.asBytes, bs, size);
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
+}
+
+int CmdAWIDClone(const char *Cmd) {
+ uint32_t blocks[4] = {T55x7_MODULATION_FSK2a | T55x7_BITRATE_RF_50 | 3<<T55x7_MAXBLOCK_SHIFT, 0, 0, 0};
+ uint32_t fc=0,cn=0;
+ uint8_t bits[96];
+ uint8_t *bs=bits;
+ memset(bs,0,sizeof(bits));
+
+ if (sscanf(Cmd, "%u %u", &fc, &cn ) != 2) return usage_lf_awid_clone();
+
+ if (param_getchar(Cmd, 3) == 'Q' || param_getchar(Cmd, 3) == 'q')
+ blocks[0] = T5555_MODULATION_FSK2 | T5555_INVERT_OUTPUT | 50<<T5555_BITRATE_SHIFT | 3<<T5555_MAXBLOCK_SHIFT;
+
+ if ((fc & 0xFF) != fc) {
+ fc &= 0xFF;
+ PrintAndLog("Facility-Code Truncated to 8-bits (AWID26): %u", fc);
+ }
+
+ if ((cn & 0xFFFF) != cn) {
+ cn &= 0xFFFF;
+ PrintAndLog("Card Number Truncated to 16-bits (AWID26): %u", cn);
+ }
+
+ if ( !getAWIDBits(fc, cn, bs)) {
+ PrintAndLog("Error with tag bitstream generation.");
+ return 1;
+ }
+
+ blocks[1] = bytebits_to_byte(bs,32);
+ blocks[2] = bytebits_to_byte(bs+32,32);
+ blocks[3] = bytebits_to_byte(bs+64,32);
+
+ PrintAndLog("Preparing to clone AWID26 to T55x7 with FC: %u, CN: %u",
+ fc, cn);
+ PrintAndLog("Blk | Data ");
+ PrintAndLog("----+------------");
+ PrintAndLog(" 00 | 0x%08x", blocks[0]);
+ PrintAndLog(" 01 | 0x%08x", blocks[1]);
+ PrintAndLog(" 02 | 0x%08x", blocks[2]);
+ PrintAndLog(" 03 | 0x%08x", blocks[3]);
+
+ UsbCommand resp;
+ UsbCommand c = {CMD_T55XX_WRITE_BLOCK, {0,0,0}};
+
+ for (uint8_t i=0; i<4; i++) {
+ c.arg[0] = blocks[i];
+ c.arg[1] = i;
+ clearCommandBuffer();
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1000)){
+ PrintAndLog("Error occurred, device did not respond during write operation.");
+ return -1;
+ }
+ }
+ return 0;
+}
+
+int CmdAWIDBrute(const char *Cmd){
+
+ uint8_t fc = 0x00;
+ uint8_t bits[96];
+ uint8_t *bs = bits;
+ size_t size = sizeof(bits);
+ memset(bs, 0x00, size);
+
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 3 || strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') return usage_lf_awid_brute();
+
+ fc = param_get8(Cmd, 0);
+ if ( fc == 0) return usage_lf_awid_brute();
+
+ PrintAndLog("Bruteforceing AWID26 Reader");
+ PrintAndLog("Press pm3-button to abort simulation or run another command");
+
+ uint64_t arg1 = (10<<8) + 8; // fcHigh = 10, fcLow = 8
+ uint64_t arg2 = 50; // clk RF/50 invert=0
+ UsbCommand c = {CMD_FSK_SIM_TAG, {arg1, arg2, size}};
projects / proxmark3-svn / blobdiff