-int CmdHF14ACmdRaw(const char *cmd) {
- UsbCommand c = {CMD_READER_ISO_14443a, {0, 0, 0}};
- uint8_t reply=1;
- uint8_t crc=0;
- uint8_t power=0;
- uint8_t active=0;
- uint8_t active_select=0;
- uint16_t numbits=0;
- uint16_t timeout=0;
- uint8_t bTimeout=0;
- char buf[5]="";
- int i=0;
- uint8_t data[USB_CMD_DATA_SIZE];
- unsigned int datalen=0, temp;
-
- if (strlen(cmd)<2) {
- PrintAndLog("Usage: hf 14a raw [-r] [-c] [-p] [-f] [-b] [-t] <number of bits> <0A 0B 0C ... hex>");
- PrintAndLog(" -r do not read response");
- PrintAndLog(" -c calculate and append CRC");
- PrintAndLog(" -p leave the signal field ON after receive");
- PrintAndLog(" -a active signal field ON without select");
- PrintAndLog(" -s active signal field ON with select");
- PrintAndLog(" -b number of bits to send. Useful for send partial byte");
- PrintAndLog(" -t timeout");
- return 0;
+int CmdHF14AAPDU(const char *cmd) {
+ uint8_t data[USB_CMD_DATA_SIZE];
+ uint16_t datalen = 0;
+ uint8_t cmdc = 0;
+ char buf[5] = {0};
+ int i = 0;
+ uint32_t temp;
+ uint8_t first, second;
+ bool activateField = false;
+ bool leaveSignalON = false;
+ bool decodeTLV = false;
+
+ if (strlen(cmd)<2) {
+ PrintAndLog("Usage: hf 14a apdu [-s] [-k] [-t] <APDU (hex)>");
+ PrintAndLog(" -s activate field and select card");
+ PrintAndLog(" -k leave the signal field ON after receive response");
+ PrintAndLog(" -t executes TLV decoder if it possible");
+ return 0;
+ }
+
+ // strip
+ while (*cmd==' ' || *cmd=='\t') cmd++;
+
+ while (cmd[i]!='\0') {
+ if (cmd[i]==' ' || cmd[i]=='\t') { i++; continue; }
+ if (cmd[i]=='-') {
+ switch (cmd[i + 1]) {
+ case 's':
+ case 'S':
+ activateField = true;
+ break;
+ case 'k':
+ case 'K':
+ leaveSignalON = true;
+ break;
+ case 't':
+ case 'T':
+ decodeTLV = true;
+ break;
+ default:
+ PrintAndLog("Invalid option");
+ return 1;
+ }
+ i += 2;
+ continue;
+ }
+ if ((cmd[i] >= '0' && cmd[i] <= '9') ||
+ (cmd[i] >= 'a' && cmd[i] <= 'f') ||
+ (cmd[i] >= 'A' && cmd[i] <= 'F') ) {
+ buf[strlen(buf) + 1] = 0x00;
+ buf[strlen(buf)] = cmd[i];
+ i++;
+
+ if (strlen(buf) >= 2) {
+ sscanf(buf, "%x", &temp);
+ data[datalen] = (uint8_t)(temp & 0xff);
+ *buf = 0;
+ if (datalen > sizeof(data) - 2) {
+ PrintAndLog("Buffer is full...");
+ break;
+ } else {
+ datalen++;
+ }
+ }
+ continue;
+ }
+ PrintAndLog("Invalid char on input");
+ return 1;
+ }
+ if (*buf) {
+ PrintAndLog("Hex must have even number of digits. Detected %d symbols.", datalen * 2 + strlen(buf));
+ return 1;
+ }
+
+ if (activateField)
+ cmdc |= ISO14A_CONNECT;
+ if (leaveSignalON)
+ cmdc |= ISO14A_NO_DISCONNECT;
+
+ // ISO 14443 APDU frame: PCB [CID] [NAD] APDU CRC PCB=0x02
+ memmove(data + 1, data, datalen);
+ data[0] = 0x02; // bnr,nad,cid,chn=0; i-block(0x00)
+ datalen++;
+
+ ComputeCrc14443(CRC_14443_A, data, datalen, &first, &second);
+ data[datalen++] = first;
+ data[datalen++] = second;
+
+ PrintAndLog("--%s %s %s >>>> %s", activateField ? "sel": "", leaveSignalON ? "keep": "", decodeTLV ? "TLV": "", sprint_hex(data, datalen));
+
+ // "Command APDU" length should be 5+255+1, but javacard's APDU buffer might be smaller - 133 bytes
+ // https://stackoverflow.com/questions/32994936/safe-max-java-card-apdu-data-command-and-respond-size
+ // here length USB_CMD_DATA_SIZE=512
+ // timeout timeout14a * 1.06 / 100, true, size, &keyBlock[6 * c], e_sector); // timeout is (ms * 106)/10 or us*0.0106
+ UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_SET_TIMEOUT | cmdc, (datalen & 0xFFFF), 1000 * 1000 * 1.06 / 100}};
+ memcpy(c.d.asBytes, data, datalen);
+ SendCommand(&c);
+
+ uint8_t *recv;
+ UsbCommand resp;
+
+ if (activateField) {
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500))
+ return 2;
+ if (resp.arg[0] != 1)
+ return 2;
+ }
+
+ if (WaitForResponseTimeout(CMD_ACK, &resp, 1500)) {
+ recv = resp.d.asBytes;
+ uint8_t iLen = resp.arg[0];
+ if(!iLen)
+ return 2;
+
+ PrintAndLog("<<<< %s", sprint_hex(recv, iLen));
+
+ // check apdu length
+ if (iLen < 5) {
+ PrintAndLog("ERROR: Small APDU response.");
+ return 3;
+ }
+
+ // check block
+ if (data[0] != recv[0]) {
+ PrintAndLog("ERROR: Block type mismatch: %02x-%02x", data[0], recv[0]);
+ return 3;
+ }
+
+ // CRC Check
+ ComputeCrc14443(CRC_14443_A, recv, iLen, &first, &second);
+ if (first || second) {
+ PrintAndLog("ERROR: ISO 14443A CRC error.");
+ return 3;
+ }
+
+ PrintAndLog("APDU response: %02x %02x", recv[iLen - 4], recv[iLen - 3]); // TODO add APDU descriptions
+
+ // here TLV decoder...
+ if (decodeTLV) {
+ }
+
+ } else {
+ PrintAndLog("ERROR: Reply timeout.");
+ return 3;
projects / proxmark3-svn / blobdiff