uint32_t compressed_data_section_size = common_area.arg1;
cmd_send(CMD_ACK, *(AT91C_DBGU_CIDR), text_and_rodata_section_size + compressed_data_section_size, 0, VersionString, strlen(VersionString));
}
+
+// measure the USB Speed by sending SpeedTestBufferSize bytes to client and measuring the elapsed time.
+// Note: this mimics GetFromBigbuf(), i.e. we have the overhead of the UsbCommand structure included.
+void printUSBSpeed(void)
+{
+ Dbprintf("USB Speed:");
+ Dbprintf(" Sending USB packets to client...");
+
+ #define USB_SPEED_TEST_MIN_TIME 1500 // in milliseconds
+ uint8_t *test_data = BigBuf_get_addr();
+ uint32_t end_time;
+
+ uint32_t start_time = end_time = GetTickCount();
+ uint32_t bytes_transferred = 0;
+
+ LED_B_ON();
+ while(end_time < start_time + USB_SPEED_TEST_MIN_TIME) {
+ cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K, 0, USB_CMD_DATA_SIZE, 0, test_data, USB_CMD_DATA_SIZE);
+ end_time = GetTickCount();
+ bytes_transferred += USB_CMD_DATA_SIZE;
+ }
+ LED_B_OFF();
+
+ Dbprintf(" Time elapsed: %dms", end_time - start_time);
+ Dbprintf(" Bytes transferred: %d", bytes_transferred);
+ Dbprintf(" USB Transfer Speed PM3 -> Client = %d Bytes/s",
+ 1000 * bytes_transferred / (end_time - start_time));
+
+}
+
/**
* Prints runtime information about the PM3.
**/
BigBuf_print_status();
Fpga_print_status();
printConfig(); //LF Sampling config
+ printUSBSpeed();
Dbprintf("Various");
Dbprintf(" MF_DBGLEVEL......%d", MF_DBGLEVEL);
Dbprintf(" ToSendMax........%d",ToSendMax);
Dbprintf(" ToSendBit........%d",ToSendBit);
+
+ cmd_send(CMD_ACK,1,0,0,0,0);
}
#if defined(WITH_ISO14443a_StandAlone) || defined(WITH_LF)
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
int selected = 0;
- int playing = 0;
+ int playing = 0, iGotoRecord = 0, iGotoClone = 0;
int cardRead[OPTS] = {0};
uint8_t readUID[10] = {0};
uint32_t uid_1st[OPTS]={0};
uint32_t uid_2nd[OPTS]={0};
+ uint32_t uid_tmp1 = 0;
+ uint32_t uid_tmp2 = 0;
+ iso14a_card_select_t hi14a_card[OPTS];
LED(selected + 1, 0);
{
usb_poll();
WDT_HIT();
-
- // Was our button held down or pressed?
- int button_pressed = BUTTON_HELD(1000);
SpinDelay(300);
- // Button was held for a second, begin recording
- if (button_pressed > 0 && cardRead[selected] == 0)
+ if (iGotoRecord == 1 || cardRead[selected] == 0)
{
+ iGotoRecord = 0;
LEDsoff();
LED(selected + 1, 0);
LED(LED_RED2, 0);
// record
Dbprintf("Enabling iso14443a reader mode for [Bank: %u]...", selected);
-
- // wait for button to be released
- while(BUTTON_PRESS())
- WDT_HIT();
/* need this delay to prevent catching some weird data */
SpinDelay(500);
/* Code for reading from 14a tag */
for ( ; ; )
{
WDT_HIT();
- if (!iso14443a_select_card(uid, NULL, &cuid))
+ if (BUTTON_PRESS()) {
+ if (cardRead[selected]) {
+ Dbprintf("Button press detected -- replaying card in bank[%d]", selected);
+ break;
+ }
+ else if (cardRead[(selected+1)%OPTS]) {
+ Dbprintf("Button press detected but no card in bank[%d] so playing from bank[%d]", selected, (selected+1)%OPTS);
+ selected = (selected+1)%OPTS;
+ break; // playing = 1;
+ }
+ else {
+ Dbprintf("Button press detected but no stored tag to play. (Ignoring button)");
+ SpinDelay(300);
+ }
+ }
+ if (!iso14443a_select_card(uid, &hi14a_card[selected], &cuid))
continue;
else
{
Dbprintf("Read UID:"); Dbhexdump(10,uid,0);
memcpy(readUID,uid,10*sizeof(uint8_t));
- uint8_t *dst = (uint8_t *)&uid_1st[selected];
+ uint8_t *dst = (uint8_t *)&uid_tmp1;
// Set UID byte order
for (int i=0; i<4; i++)
dst[i] = uid[3-i];
- dst = (uint8_t *)&uid_2nd[selected];
+ dst = (uint8_t *)&uid_tmp2;
for (int i=0; i<4; i++)
dst[i] = uid[7-i];
- break;
+ if (uid_1st[(selected+1)%OPTS] == uid_tmp1 && uid_2nd[(selected+1)%OPTS] == uid_tmp2) {
+ Dbprintf("Card selected has same UID as what is stored in the other bank. Skipping.");
+ }
+ else {
+ if (uid_tmp2) {
+ Dbprintf("Bank[%d] received a 7-byte UID",selected);
+ uid_1st[selected] = (uid_tmp1)>>8;
+ uid_2nd[selected] = (uid_tmp1<<24) + (uid_tmp2>>8);
+ }
+ else {
+ Dbprintf("Bank[%d] received a 4-byte UID",selected);
+ uid_1st[selected] = uid_tmp1;
+ uid_2nd[selected] = uid_tmp2;
+ }
+ break;
+ }
}
}
+ Dbprintf("ATQA = %02X%02X",hi14a_card[selected].atqa[0],hi14a_card[selected].atqa[1]);
+ Dbprintf("SAK = %02X",hi14a_card[selected].sak);
LEDsoff();
LED(LED_GREEN, 200);
LED(LED_ORANGE, 200);
LEDsoff();
LED(selected + 1, 0);
- // Finished recording
- // If we were previously playing, set playing off
- // so next button push begins playing what we recorded
- playing = 0;
+ // Next state is replay:
+ playing = 1;
cardRead[selected] = 1;
-
}
- /* MF UID clone */
- else if (button_pressed > 0 && cardRead[selected] == 1)
+ /* MF Classic UID clone */
+ else if (iGotoClone==1)
{
- LEDsoff();
- LED(selected + 1, 0);
- LED(LED_ORANGE, 250);
+ iGotoClone=0;
+ LEDsoff();
+ LED(selected + 1, 0);
+ LED(LED_ORANGE, 250);
- // record
- Dbprintf("Preparing to Clone card [Bank: %x]; uid: %08x", selected, uid_1st[selected]);
-
- // wait for button to be released
- while(BUTTON_PRESS())
- {
- // Delay cloning until card is in place
- WDT_HIT();
- }
- Dbprintf("Starting clone. [Bank: %u]", selected);
- // need this delay to prevent catching some weird data
- SpinDelay(500);
- // Begin clone function here:
- /* Example from client/mifarehost.c for commanding a block write for "magic Chinese" cards:
- UsbCommand c = {CMD_MIFARE_CSETBLOCK, {wantWipe, params & (0xFE | (uid == NULL ? 0:1)), blockNo}};
- memcpy(c.d.asBytes, data, 16);
- SendCommand(&c);
-
- Block read is similar:
- UsbCommand c = {CMD_MIFARE_CGETBLOCK, {params, 0, blockNo}};
- We need to imitate that call with blockNo 0 to set a uid.
-
- The get and set commands are handled in this file:
- // Work with "magic Chinese" card
- case CMD_MIFARE_CSETBLOCK:
- MifareCSetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
- break;
- case CMD_MIFARE_CGETBLOCK:
- MifareCGetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
- //
- break;
-
- mfCSetUID provides example logic for UID set workflow:
- -Read block0 from card in field with MifareCGetBlock()
- -Configure new values without replacing reserved bytes
- memcpy(block0, uid, 4); // Copy UID bytes from byte array
- // Mifare UID BCC
- block0[4] = block0[0]^block0[1]^block0[2]^block0[3]; // BCC on byte 5
- Bytes 5-7 are reserved SAK and ATQA for mifare classic
- -Use mfCSetBlock(0, block0, oldUID, wantWipe, CSETBLOCK_SINGLE_OPER) to write it
- */
- uint8_t oldBlock0[16] = {0}, newBlock0[16] = {0}, testBlock0[16] = {0};
- // arg0 = Flags == CSETBLOCK_SINGLE_OPER=0x1F, arg1=returnSlot, arg2=blockNo
- MifareCGetBlock(0x1F, 1, 0, oldBlock0);
- Dbprintf("UID from target tag: %02X%02X%02X%02X", oldBlock0[0],oldBlock0[1],oldBlock0[2],oldBlock0[3]);
- memcpy(newBlock0,oldBlock0,16);
- // Copy uid_1st for bank (2nd is for longer UIDs not supported if classic)
-
- newBlock0[0] = uid_1st[selected]>>24;
- newBlock0[1] = 0xFF & (uid_1st[selected]>>16);
- newBlock0[2] = 0xFF & (uid_1st[selected]>>8);
- newBlock0[3] = 0xFF & (uid_1st[selected]);
- newBlock0[4] = newBlock0[0]^newBlock0[1]^newBlock0[2]^newBlock0[3];
- // arg0 = needWipe, arg1 = workFlags, arg2 = blockNo, datain
- MifareCSetBlock(0, 0xFF,0, newBlock0);
- MifareCGetBlock(0x1F, 1, 0, testBlock0);
- if (memcmp(testBlock0,newBlock0,16)==0)
- {
- DbpString("Cloned successfull!");
- cardRead[selected] = 0; // Only if the card was cloned successfully should we clear it
- }
- LEDsoff();
- LED(selected + 1, 0);
- // Finished recording
+ // record
+ Dbprintf("Preparing to Clone card [Bank: %x]; uid: %08x", selected, uid_1st[selected]);
- // If we were previously playing, set playing off
- // so next button push begins playing what we recorded
+ // wait for button to be released
+ while(BUTTON_PRESS())
+ {
+ // Delay cloning until card is in place
+ WDT_HIT();
+ }
+ Dbprintf("Starting clone. [Bank: %u]", selected);
+ // need this delay to prevent catching some weird data
+ SpinDelay(500);
+ // Begin clone function here:
+ /* Example from client/mifarehost.c for commanding a block write for "magic Chinese" cards:
+ UsbCommand c = {CMD_MIFARE_CSETBLOCK, {wantWipe, params & (0xFE | (uid == NULL ? 0:1)), blockNo}};
+ memcpy(c.d.asBytes, data, 16);
+ SendCommand(&c);
+
+ Block read is similar:
+ UsbCommand c = {CMD_MIFARE_CGETBLOCK, {params, 0, blockNo}};
+ We need to imitate that call with blockNo 0 to set a uid.
+
+ The get and set commands are handled in this file:
+ // Work with "magic Chinese" card
+ case CMD_MIFARE_CSETBLOCK:
+ MifareCSetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+ break;
+ case CMD_MIFARE_CGETBLOCK:
+ MifareCGetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+ break;
+
+ mfCSetUID provides example logic for UID set workflow:
+ -Read block0 from card in field with MifareCGetBlock()
+ -Configure new values without replacing reserved bytes
+ memcpy(block0, uid, 4); // Copy UID bytes from byte array
+ // Mifare UID BCC
+ block0[4] = block0[0]^block0[1]^block0[2]^block0[3]; // BCC on byte 5
+ Bytes 5-7 are reserved SAK and ATQA for mifare classic
+ -Use mfCSetBlock(0, block0, oldUID, wantWipe, CSETBLOCK_SINGLE_OPER) to write it
+ */
+ uint8_t oldBlock0[16] = {0}, newBlock0[16] = {0}, testBlock0[16] = {0};
+ // arg0 = Flags == CSETBLOCK_SINGLE_OPER=0x1F, arg1=returnSlot, arg2=blockNo
+ MifareCGetBlock(0x3F, 1, 0, oldBlock0);
+ if (oldBlock0[0] == 0 && oldBlock0[0] == oldBlock0[1] && oldBlock0[1] == oldBlock0[2] && oldBlock0[2] == oldBlock0[3]) {
+ Dbprintf("No changeable tag detected. Returning to replay mode for bank[%d]", selected);
+ playing = 1;
+ }
+ else {
+ Dbprintf("UID from target tag: %02X%02X%02X%02X", oldBlock0[0],oldBlock0[1],oldBlock0[2],oldBlock0[3]);
+ memcpy(newBlock0,oldBlock0,16);
+ // Copy uid_1st for bank (2nd is for longer UIDs not supported if classic)
+
+ newBlock0[0] = uid_1st[selected]>>24;
+ newBlock0[1] = 0xFF & (uid_1st[selected]>>16);
+ newBlock0[2] = 0xFF & (uid_1st[selected]>>8);
+ newBlock0[3] = 0xFF & (uid_1st[selected]);
+ newBlock0[4] = newBlock0[0]^newBlock0[1]^newBlock0[2]^newBlock0[3];
+ // arg0 = needWipe, arg1 = workFlags, arg2 = blockNo, datain
+ MifareCSetBlock(0, 0xFF,0, newBlock0);
+ MifareCGetBlock(0x3F, 1, 0, testBlock0);
+ if (memcmp(testBlock0,newBlock0,16)==0)
+ {
+ DbpString("Cloned successfull!");
+ cardRead[selected] = 0; // Only if the card was cloned successfully should we clear it
playing = 0;
+ iGotoRecord = 1;
+ selected = (selected+1) % OPTS;
+ }
+ else {
+ Dbprintf("Clone failed. Back to replay mode on bank[%d]", selected);
+ playing = 1;
+ }
+ }
+ LEDsoff();
+ LED(selected + 1, 0);
}
// Change where to record (or begin playing)
- else if (button_pressed && cardRead[selected])
+ else if (playing==1) // button_pressed == BUTTON_SINGLE_CLICK && cardRead[selected])
{
- // Next option if we were previously playing
- if (playing)
- selected = (selected + 1) % OPTS;
- playing = !playing;
-
LEDsoff();
LED(selected + 1, 0);
{
LED(LED_GREEN, 0);
DbpString("Playing");
- while (!BUTTON_HELD(500)) { // Loop simulating tag until the button is held a half-sec
+ for ( ; ; ) {
+ WDT_HIT();
+ int button_action = BUTTON_HELD(1000);
+ if (button_action == 0) { // No button action, proceed with sim
+ uint8_t data[512] = {0}; // in case there is a read command received we shouldn't break
Dbprintf("Simulating ISO14443a tag with uid[0]: %08x, uid[1]: %08x [Bank: %u]", uid_1st[selected],uid_2nd[selected],selected);
- SimulateIso14443aTag(1,uid_1st[selected],uid_2nd[selected],NULL);
+ if (hi14a_card[selected].sak == 8 && hi14a_card[selected].atqa[0] == 4 && hi14a_card[selected].atqa[1] == 0) {
+ DbpString("Mifare Classic");
+ SimulateIso14443aTag(1,uid_1st[selected], uid_2nd[selected], data); // Mifare Classic
+ }
+ else if (hi14a_card[selected].sak == 0 && hi14a_card[selected].atqa[0] == 0x44 && hi14a_card[selected].atqa[1] == 0) {
+ DbpString("Mifare Ultralight");
+ SimulateIso14443aTag(2,uid_1st[selected],uid_2nd[selected],data); // Mifare Ultralight
+ }
+ else if (hi14a_card[selected].sak == 20 && hi14a_card[selected].atqa[0] == 0x44 && hi14a_card[selected].atqa[1] == 3) {
+ DbpString("Mifare DESFire");
+ SimulateIso14443aTag(3,uid_1st[selected],uid_2nd[selected],data); // Mifare DESFire
+ }
+ else {
+ Dbprintf("Unrecognized tag type -- defaulting to Mifare Classic emulation");
+ SimulateIso14443aTag(1,uid_1st[selected], uid_2nd[selected], data);
+ }
+ }
+ else if (button_action == BUTTON_SINGLE_CLICK) {
+ selected = (selected + 1) % OPTS;
+ Dbprintf("Done playing. Switching to record mode on bank %d",selected);
+ iGotoRecord = 1;
+ break;
}
- //cardRead[selected] = 1;
- Dbprintf("Done playing [Bank: %u]",selected);
+ else if (button_action == BUTTON_HOLD) {
+ Dbprintf("Playtime over. Begin cloning...");
+ iGotoClone = 1;
+ break;
+ }
+ WDT_HIT();
+ }
/* We pressed a button so ignore it here with a delay */
SpinDelay(300);
-
- // when done, we're done playing, move to next option
- selected = (selected + 1) % OPTS;
- playing = !playing;
LEDsoff();
LED(selected + 1, 0);
}
projects / proxmark3-svn / blobdiff