//-----------------------------------------------------------------------------
+// Jonathan Westhues, split Nov 2006
+// Modified by Greg Jones, Jan 2009
+// Modified by Adrian Dabrowski "atrox", Mar-Sept 2010
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
// Routines to support ISO 15693. This includes both the reader software and
// the `fake tag' modes, but at the moment I've implemented only the reader
// stuff, and that barely.
-// Jonathan Westhues, split Nov 2006
-
-// Modified by Greg Jones, Jan 2009 to perform modulation onboard in arm rather than on PC
+// Modified to perform modulation onboard in arm rather than on PC
// Also added additional reader commands (SELECT, READ etc.)
-
//-----------------------------------------------------------------------------
+// The ISO 15693 describes two transmission modes from reader to tag, and 4
+// transmission modes from tag to reader. As of Mar 2010 this code only
+// supports one of each: "1of4" mode from reader to tag, and the highspeed
+// variant with one subcarrier from card to reader.
+// As long, as the card fully support ISO 15693 this is no problem, since the
+// reader chooses both data rates, but some non-standard tags do not. Further for
+// the simulation to work, we will need to support all data rates.
+//
+// VCD (reader) -> VICC (tag)
+// 1 out of 256:
+// data rate: 1,66 kbit/s (fc/8192)
+// used for long range
+// 1 out of 4:
+// data rate: 26,48 kbit/s (fc/512)
+// used for short range, high speed
+//
+// VICC (tag) -> VCD (reader)
+// Modulation:
+// ASK / one subcarrier (423,75 khz)
+// FSK / two subcarriers (423,75 khz && 484,28 khz)
+// Data Rates / Modes:
+// low ASK: 6,62 kbit/s
+// low FSK: 6.67 kbit/s
+// high ASK: 26,48 kbit/s
+// high FSK: 26,69 kbit/s
+//-----------------------------------------------------------------------------
+// added "1 out of 256" mode (for VCD->PICC) - atrox 20100911
+
+
+// Random Remarks:
+// *) UID is always used "transmission order" (LSB), which is reverse to display order
+
+// TODO / BUGS / ISSUES:
+// *) writing to tags takes longer: we miss the answer from the tag in most cases
+// -> tweak the read-timeout times
+// *) signal decoding from the card is still a bit shaky.
+// *) signal decoding is unable to detect collissions.
+// *) add anti-collission support for inventory-commands
+// *) sniffing and simulation do only support one transmission mode. need to support
+// all 8 transmission combinations
+// *) remove or refactor code under "depricated"
+// *) document all the functions
+
+
#include "proxmark3.h"
+#include "util.h"
#include "apps.h"
+#include "string.h"
+#include "iso15693tools.h"
+
-// FROM winsrc\prox.h //////////////////////////////////
#define arraylen(x) (sizeof(x)/sizeof((x)[0]))
-//-----------------------------------------------------------------------------
-// Map a sequence of octets (~layer 2 command) into the set of bits to feed
-// to the FPGA, to transmit that command to the tag.
-//-----------------------------------------------------------------------------
+///////////////////////////////////////////////////////////////////////
+// ISO 15693 Part 2 - Air Interface
+// This section basicly contains transmission and receiving of bits
+///////////////////////////////////////////////////////////////////////
+
+#define FrameSOF Iso15693FrameSOF
+#define Logic0 Iso15693Logic0
+#define Logic1 Iso15693Logic1
+#define FrameEOF Iso15693FrameEOF
+
+#define Crc(data,datalen) Iso15693Crc(data,datalen)
+#define AddCrc(data,datalen) Iso15693AddCrc(data,datalen)
+#define sprintUID(target,uid) Iso15693sprintUID(target,uid)
+
+int DEBUG=0;
- // The sampling rate is 106.353 ksps/s, for T = 18.8 us
-
- // SOF defined as
- // 1) Unmodulated time of 56.64us
- // 2) 24 pulses of 423.75khz
- // 3) logic '1' (unmodulated for 18.88us followed by 8 pulses of 423.75khz)
-
- static const int FrameSOF[] = {
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- -1, -1, -1, -1,
- -1, -1, -1, -1,
- 1, 1, 1, 1,
- 1, 1, 1, 1
- };
- static const int Logic0[] = {
- 1, 1, 1, 1,
- 1, 1, 1, 1,
- -1, -1, -1, -1,
- -1, -1, -1, -1
- };
- static const int Logic1[] = {
- -1, -1, -1, -1,
- -1, -1, -1, -1,
- 1, 1, 1, 1,
- 1, 1, 1, 1
- };
-
- // EOF defined as
- // 1) logic '0' (8 pulses of 423.75khz followed by unmodulated for 18.88us)
- // 2) 24 pulses of 423.75khz
- // 3) Unmodulated time of 56.64us
-
- static const int FrameEOF[] = {
- 1, 1, 1, 1,
- 1, 1, 1, 1,
- -1, -1, -1, -1,
- -1, -1, -1, -1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
- };
-
-static void CodeIso15693AsReader(BYTE *cmd, int n)
+
+// ---------------------------
+// Signal Processing
+// ---------------------------
+
+// prepare data using "1 out of 4" code for later transmission
+// resulting data rate is 26,48 kbit/s (fc/512)
+// cmd ... data
+// n ... length of data
+static void CodeIso15693AsReader(uint8_t *cmd, int n)
{
int i, j;
ToSendStuffBit(1);
}
+ // SOF for 1of4
ToSendStuffBit(0);
ToSendStuffBit(1);
ToSendStuffBit(1);
}
}
}
+ // EOF
ToSendStuffBit(1);
ToSendStuffBit(1);
ToSendStuffBit(0);
}
}
-//-----------------------------------------------------------------------------
-// The CRC used by ISO 15693.
-//-----------------------------------------------------------------------------
-static WORD Crc(BYTE *v, int n)
+// encode data using "1 out of 256" sheme
+// data rate is 1,66 kbit/s (fc/8192)
+// is designed for more robust communication over longer distances
+static void CodeIso15693AsReader256(uint8_t *cmd, int n)
{
- DWORD reg;
int i, j;
- reg = 0xffff;
- for(i = 0; i < n; i++) {
- reg = reg ^ ((DWORD)v[i]);
- for (j = 0; j < 8; j++) {
- if (reg & 0x0001) {
- reg = (reg >> 1) ^ 0x8408;
- } else {
- reg = (reg >> 1);
- }
- }
- }
-
- return ~reg;
-}
-
-char *strcat(char *dest, const char *src)
-{
- size_t dest_len = strlen(dest);
- size_t i;
-
- for (i = 0 ; src[i] != '\0' ; i++)
- dest[dest_len + i] = src[i];
- dest[dest_len + i] = '\0';
-
- return dest;
-}
-
-////////////////////////////////////////// code to do 'itoa'
-
-/* reverse: reverse string s in place */
-void reverse(char s[])
-{
- int c, i, j;
-
- for (i = 0, j = strlen(s)-1; i<j; i++, j--) {
- c = s[i];
- s[i] = s[j];
- s[j] = c;
- }
-}
-
-/* itoa: convert n to characters in s */
-void itoa(int n, char s[])
-{
- int i, sign;
-
- if ((sign = n) < 0) /* record sign */
- n = -n; /* make n positive */
- i = 0;
- do { /* generate digits in reverse order */
- s[i++] = n % 10 + '0'; /* get next digit */
- } while ((n /= 10) > 0); /* delete it */
- if (sign < 0)
- s[i++] = '-';
- s[i] = '\0';
- reverse(s);
-}
-
-//////////////////////////////////////// END 'itoa' CODE
-
-//-----------------------------------------------------------------------------
-// Encode (into the ToSend buffers) an identify request, which is the first
-// thing that you must send to a tag to get a response.
-//-----------------------------------------------------------------------------
-static void BuildIdentifyRequest(void)
-{
- BYTE cmd[5];
-
- WORD crc;
- // one sub-carrier, inventory, 1 slot, fast rate
- // AFI is at bit 5 (1<<4) when doing an INVENTORY
- cmd[0] = (1 << 2) | (1 << 5) | (1 << 1);
- // inventory command code
- cmd[1] = 0x01;
- // no mask
- cmd[2] = 0x00;
- //Now the CRC
- crc = Crc(cmd, 3);
- cmd[3] = crc & 0xff;
- cmd[4] = crc >> 8;
-
- CodeIso15693AsReader(cmd, sizeof(cmd));
-}
-
-static void __attribute__((unused)) BuildSysInfoRequest(BYTE *uid)
-{
- BYTE cmd[12];
-
- WORD crc;
- // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
- // followed by teh block data
- // one sub-carrier, inventory, 1 slot, fast rate
- cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit
- // System Information command code
- cmd[1] = 0x2B;
- // UID may be optionally specified here
- // 64-bit UID
- cmd[2] = 0x32;
- cmd[3]= 0x4b;
- cmd[4] = 0x03;
- cmd[5] = 0x01;
- cmd[6] = 0x00;
- cmd[7] = 0x10;
- cmd[8] = 0x05;
- cmd[9]= 0xe0; // always e0 (not exactly unique)
- //Now the CRC
- crc = Crc(cmd, 10); // the crc needs to be calculated over 2 bytes
- cmd[10] = crc & 0xff;
- cmd[11] = crc >> 8;
-
- CodeIso15693AsReader(cmd, sizeof(cmd));
-}
-
-static void BuildSelectRequest( BYTE uid[])
-{
-
-// uid[6]=0x31; // this is getting ignored - the uid array is not happening...
- BYTE cmd[12];
-
- WORD crc;
- // one sub-carrier, inventory, 1 slot, fast rate
- //cmd[0] = (1 << 2) | (1 << 5) | (1 << 1); // INVENTROY FLAGS
- cmd[0] = (1 << 4) | (1 << 5) | (1 << 1); // Select and addressed FLAGS
- // SELECT command code
- cmd[1] = 0x25;
- // 64-bit UID
-// cmd[2] = uid[0];//0x32;
-// cmd[3]= uid[1];//0x4b;
-// cmd[4] = uid[2];//0x03;
-// cmd[5] = uid[3];//0x01;
-// cmd[6] = uid[4];//0x00;
-// cmd[7] = uid[5];//0x10;
-// cmd[8] = uid[6];//0x05;
- cmd[2] = 0x32;//
- cmd[3] = 0x4b;
- cmd[4] = 0x03;
- cmd[5] = 0x01;
- cmd[6] = 0x00;
- cmd[7] = 0x10;
- cmd[8] = 0x05; // infineon?
-
- cmd[9]= 0xe0; // always e0 (not exactly unique)
-
-// DbpIntegers(cmd[8],cmd[7],cmd[6]);
- // Now the CRC
- crc = Crc(cmd, 10); // the crc needs to be calculated over 10 bytes
- cmd[10] = crc & 0xff;
- cmd[11] = crc >> 8;
-
- CodeIso15693AsReader(cmd, sizeof(cmd));
-}
-
-static void __attribute__((unused)) BuildReadBlockRequest(BYTE *uid, BYTE blockNumber )
-{
- BYTE cmd[13];
-
- WORD crc;
- // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
- // followed by teh block data
- // one sub-carrier, inventory, 1 slot, fast rate
- cmd[0] = (1 << 6)| (1 << 5) | (1 << 1); // no SELECT bit
- // READ BLOCK command code
- cmd[1] = 0x20;
- // UID may be optionally specified here
- // 64-bit UID
- cmd[2] = 0x32;
- cmd[3]= 0x4b;
- cmd[4] = 0x03;
- cmd[5] = 0x01;
- cmd[6] = 0x00;
- cmd[7] = 0x10;
- cmd[8] = 0x05;
- cmd[9]= 0xe0; // always e0 (not exactly unique)
- // Block number to read
- cmd[10] = blockNumber;//0x00;
- //Now the CRC
- crc = Crc(cmd, 11); // the crc needs to be calculated over 2 bytes
- cmd[11] = crc & 0xff;
- cmd[12] = crc >> 8;
-
- CodeIso15693AsReader(cmd, sizeof(cmd));
-}
-
-static void __attribute__((unused)) BuildReadMultiBlockRequest(BYTE *uid)
-{
- BYTE cmd[14];
-
- WORD crc;
- // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
- // followed by teh block data
- // one sub-carrier, inventory, 1 slot, fast rate
- cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit
- // READ Multi BLOCK command code
- cmd[1] = 0x23;
- // UID may be optionally specified here
- // 64-bit UID
- cmd[2] = 0x32;
- cmd[3]= 0x4b;
- cmd[4] = 0x03;
- cmd[5] = 0x01;
- cmd[6] = 0x00;
- cmd[7] = 0x10;
- cmd[8] = 0x05;
- cmd[9]= 0xe0; // always e0 (not exactly unique)
- // First Block number to read
- cmd[10] = 0x00;
- // Number of Blocks to read
- cmd[11] = 0x2f; // read quite a few
- //Now the CRC
- crc = Crc(cmd, 12); // the crc needs to be calculated over 2 bytes
- cmd[12] = crc & 0xff;
- cmd[13] = crc >> 8;
-
- CodeIso15693AsReader(cmd, sizeof(cmd));
-}
-
-static void __attribute__((unused)) BuildArbitraryRequest(BYTE *uid,BYTE CmdCode)
-{
- BYTE cmd[14];
-
- WORD crc;
- // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
- // followed by teh block data
- // one sub-carrier, inventory, 1 slot, fast rate
- cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit
- // READ BLOCK command code
- cmd[1] = CmdCode;
- // UID may be optionally specified here
- // 64-bit UID
- cmd[2] = 0x32;
- cmd[3]= 0x4b;
- cmd[4] = 0x03;
- cmd[5] = 0x01;
- cmd[6] = 0x00;
- cmd[7] = 0x10;
- cmd[8] = 0x05;
- cmd[9]= 0xe0; // always e0 (not exactly unique)
- // Parameter
- cmd[10] = 0x00;
- cmd[11] = 0x0a;
-
-// cmd[12] = 0x00;
-// cmd[13] = 0x00; //Now the CRC
- crc = Crc(cmd, 12); // the crc needs to be calculated over 2 bytes
- cmd[12] = crc & 0xff;
- cmd[13] = crc >> 8;
-
- CodeIso15693AsReader(cmd, sizeof(cmd));
-}
-
-static void __attribute__((unused)) BuildArbitraryCustomRequest(BYTE uid[], BYTE CmdCode)
-{
- BYTE cmd[14];
-
- WORD crc;
- // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
- // followed by teh block data
- // one sub-carrier, inventory, 1 slot, fast rate
- cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit
- // READ BLOCK command code
- cmd[1] = CmdCode;
- // UID may be optionally specified here
- // 64-bit UID
- cmd[2] = 0x32;
- cmd[3]= 0x4b;
- cmd[4] = 0x03;
- cmd[5] = 0x01;
- cmd[6] = 0x00;
- cmd[7] = 0x10;
- cmd[8] = 0x05;
- cmd[9]= 0xe0; // always e0 (not exactly unique)
- // Parameter
- cmd[10] = 0x05; // for custom codes this must be manufcturer code
- cmd[11] = 0x00;
-
-// cmd[12] = 0x00;
-// cmd[13] = 0x00; //Now the CRC
- crc = Crc(cmd, 12); // the crc needs to be calculated over 2 bytes
- cmd[12] = crc & 0xff;
- cmd[13] = crc >> 8;
-
- CodeIso15693AsReader(cmd, sizeof(cmd));
-}
-
-/////////////////////////////////////////////////////////////////////////
-// Now the VICC>VCD responses when we are simulating a tag
-////////////////////////////////////////////////////////////////////
-
- static void BuildInventoryResponse(void)
-{
- BYTE cmd[12];
+ ToSendReset();
- WORD crc;
- // one sub-carrier, inventory, 1 slot, fast rate
- // AFI is at bit 5 (1<<4) when doing an INVENTORY
- cmd[0] = 0; //(1 << 2) | (1 << 5) | (1 << 1);
- cmd[1] = 0;
- // 64-bit UID
- cmd[2] = 0x32;
- cmd[3]= 0x4b;
- cmd[4] = 0x03;
- cmd[5] = 0x01;
- cmd[6] = 0x00;
- cmd[7] = 0x10;
- cmd[8] = 0x05;
- cmd[9]= 0xe0;
- //Now the CRC
- crc = Crc(cmd, 10);
- cmd[10] = crc & 0xff;
- cmd[11] = crc >> 8;
+ // Give it a bit of slack at the beginning
+ for(i = 0; i < 24; i++) {
+ ToSendStuffBit(1);
+ }
- CodeIso15693AsReader(cmd, sizeof(cmd));
+ // SOF for 1of256
+ ToSendStuffBit(0);
+ ToSendStuffBit(1);
+ ToSendStuffBit(1);
+ ToSendStuffBit(1);
+ ToSendStuffBit(1);
+ ToSendStuffBit(1);
+ ToSendStuffBit(1);
+ ToSendStuffBit(0);
+
+ for(i = 0; i < n; i++) {
+ for (j = 0; j<=255; j++) {
+ if (cmd[i]==j) {
+ ToSendStuffBit(1);
+ ToSendStuffBit(0);
+ } else {
+ ToSendStuffBit(1);
+ ToSendStuffBit(1);
+ }
+ }
+ }
+ // EOF
+ ToSendStuffBit(1);
+ ToSendStuffBit(1);
+ ToSendStuffBit(0);
+ ToSendStuffBit(1);
+
+ // And slack at the end, too.
+ for(i = 0; i < 24; i++) {
+ ToSendStuffBit(1);
+ }
}
-//-----------------------------------------------------------------------------
+
// Transmit the command (to the tag) that was placed in ToSend[].
-//-----------------------------------------------------------------------------
-static void TransmitTo15693Tag(const BYTE *cmd, int len, int *samples, int *wait)
+static void TransmitTo15693Tag(const uint8_t *cmd, int len, int *samples, int *wait)
{
int c;
// c++;
// }
// if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
-// volatile DWORD r = AT91C_BASE_SSC->SSC_RHR;
+// volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR;
// (void)r;
// }
// WDT_HIT();
}
}
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
- volatile DWORD r = AT91C_BASE_SSC->SSC_RHR;
+ volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR;
(void)r;
}
WDT_HIT();
//-----------------------------------------------------------------------------
// Transmit the command (to the reader) that was placed in ToSend[].
//-----------------------------------------------------------------------------
-static void TransmitTo15693Reader(const BYTE *cmd, int len, int *samples, int *wait)
+static void TransmitTo15693Reader(const uint8_t *cmd, int len, int *samples, int *wait)
{
int c;
}
}
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
- volatile DWORD r = AT91C_BASE_SSC->SSC_RHR;
+ volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR;
(void)r;
}
WDT_HIT();
*samples = (c + *wait) << 3;
}
-static int GetIso15693AnswerFromTag(BYTE *receivedResponse, int maxLen, int *samples, int *elapsed)
+
+// Read from Tag
+// Parameters:
+// receivedResponse
+// maxLen
+// samples
+// elapsed
+// returns:
+// number of decoded bytes
+static int GetIso15693AnswerFromTag(uint8_t *receivedResponse, int maxLen, int *samples, int *elapsed)
{
int c = 0;
- BYTE *dest = (BYTE *)BigBuf;
+ uint8_t *dest = (uint8_t *)BigBuf;
int getNext = 0;
- SBYTE prev = 0;
+ int8_t prev = 0;
// NOW READ RESPONSE
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
AT91C_BASE_SSC->SSC_THR = 0x43;
}
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
- SBYTE b;
- b = (SBYTE)AT91C_BASE_SSC->SSC_RHR;
+ int8_t b;
+ b = (int8_t)AT91C_BASE_SSC->SSC_RHR;
// The samples are correlations against I and Q versions of the
// tone that the tag AM-modulates, so every other sample is I,
// every other is Q. We just want power, so abs(I) + abs(Q) is
// close to what we want.
if(getNext) {
- SBYTE r;
+ int8_t r;
if(b < 0) {
r = -b;
r += prev;
}
- dest[c++] = (BYTE)r;
+ dest[c++] = (uint8_t)r;
if(c >= 2000) {
break;
}
}
-//////////////////////////////////////////
-/////////// DEMODULATE ///////////////////
-//////////////////////////////////////////
+ //////////////////////////////////////////
+ /////////// DEMODULATE ///////////////////
+ //////////////////////////////////////////
int i, j;
int max = 0, maxPos=0;
int skip = 4;
-// if(GraphTraceLen < 1000) return; // THIS CHECKS FOR A BUFFER TO SMALL
+ // if(GraphTraceLen < 1000) return; // THIS CHECKS FOR A BUFFER TO SMALL
// First, correlate for SOF
for(i = 0; i < 100; i++) {
maxPos = i;
}
}
-// DbpString("SOF at %d, correlation %d", maxPos,max/(arraylen(FrameSOF)/skip));
+ // DbpString("SOF at %d, correlation %d", maxPos,max/(arraylen(FrameSOF)/skip));
int k = 0; // this will be our return value
if ((max/(arraylen(FrameSOF)/skip)) >= 1)
{
- i = maxPos + arraylen(FrameSOF)/skip;
-
- BYTE outBuf[20];
- memset(outBuf, 0, sizeof(outBuf));
- BYTE mask = 0x01;
- for(;;) {
- int corr0 = 0, corr1 = 0, corrEOF = 0;
- for(j = 0; j < arraylen(Logic0); j += skip) {
- corr0 += Logic0[j]*dest[i+(j/skip)];
- }
- for(j = 0; j < arraylen(Logic1); j += skip) {
- corr1 += Logic1[j]*dest[i+(j/skip)];
- }
- for(j = 0; j < arraylen(FrameEOF); j += skip) {
- corrEOF += FrameEOF[j]*dest[i+(j/skip)];
- }
- // Even things out by the length of the target waveform.
- corr0 *= 4;
- corr1 *= 4;
-
- if(corrEOF > corr1 && corrEOF > corr0) {
-// DbpString("EOF at %d", i);
- break;
- } else if(corr1 > corr0) {
- i += arraylen(Logic1)/skip;
- outBuf[k] |= mask;
- } else {
- i += arraylen(Logic0)/skip;
+ i = maxPos + arraylen(FrameSOF)/skip;
+
+ uint8_t outBuf[20];
+ memset(outBuf, 0, sizeof(outBuf));
+ uint8_t mask = 0x01;
+ for(;;) {
+ int corr0 = 0, corr1 = 0, corrEOF = 0;
+ for(j = 0; j < arraylen(Logic0); j += skip) {
+ corr0 += Logic0[j]*dest[i+(j/skip)];
+ }
+ for(j = 0; j < arraylen(Logic1); j += skip) {
+ corr1 += Logic1[j]*dest[i+(j/skip)];
+ }
+ for(j = 0; j < arraylen(FrameEOF); j += skip) {
+ corrEOF += FrameEOF[j]*dest[i+(j/skip)];
+ }
+ // Even things out by the length of the target waveform.
+ corr0 *= 4;
+ corr1 *= 4;
+
+ if(corrEOF > corr1 && corrEOF > corr0) {
+ // DbpString("EOF at %d", i);
+ break;
+ } else if(corr1 > corr0) {
+ i += arraylen(Logic1)/skip;
+ outBuf[k] |= mask;
+ } else {
+ i += arraylen(Logic0)/skip;
+ }
+ mask <<= 1;
+ if(mask == 0) {
+ k++;
+ mask = 0x01;
+ }
+ if((i+(int)arraylen(FrameEOF)) >= 2000) {
+ DbpString("ran off end!");
+ break;
+ }
}
- mask <<= 1;
- if(mask == 0) {
- k++;
- mask = 0x01;
+ if(mask != 0x01) { // this happens, when we miss the EOF
+ // TODO: for some reason this happens quite often
+ if (DEBUG) Dbprintf("error, uneven octet! (extra bits!) mask=%02x", mask);
+ if (mask<0x08) k--; // discard the last uneven octet;
+ // 0x08 is an assumption - but works quite often
}
- if((i+(int)arraylen(FrameEOF)) >= 2000) {
- DbpString("ran off end!");
- break;
+ // uint8_t str1 [8];
+ // itoa(k,str1);
+ // strncat(str1," octets read",8);
+
+ // DbpString( str1); // DbpString("%d octets", k);
+
+ // for(i = 0; i < k; i+=3) {
+ // //DbpString("# %2d: %02x ", i, outBuf[i]);
+ // DbpIntegers(outBuf[i],outBuf[i+1],outBuf[i+2]);
+ // }
+
+ for(i = 0; i < k; i++) {
+ receivedResponse[i] = outBuf[i];
}
- }
- if(mask != 0x01) {
- DbpString("error, uneven octet! (discard extra bits!)");
-/// DbpString(" mask=%02x", mask);
- }
-// BYTE str1 [8];
-// itoa(k,str1);
-// strcat(str1," octets read");
-
-// DbpString( str1); // DbpString("%d octets", k);
-
-// for(i = 0; i < k; i+=3) {
-// //DbpString("# %2d: %02x ", i, outBuf[i]);
-// DbpIntegers(outBuf[i],outBuf[i+1],outBuf[i+2]);
-// }
-
- for(i = 0; i < k; i++) {
- receivedResponse[i] = outBuf[i];
- }
} // "end if correlation > 0" (max/(arraylen(FrameSOF)/skip))
return k; // return the number of bytes demodulated
}
+
// Now the GetISO15693 message from sniffing command
-static int GetIso15693AnswerFromSniff(BYTE *receivedResponse, int maxLen, int *samples, int *elapsed)
+static int GetIso15693AnswerFromSniff(uint8_t *receivedResponse, int maxLen, int *samples, int *elapsed)
{
int c = 0;
- BYTE *dest = (BYTE *)BigBuf;
+ uint8_t *dest = (uint8_t *)BigBuf;
int getNext = 0;
- SBYTE prev = 0;
+ int8_t prev = 0;
// NOW READ RESPONSE
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
AT91C_BASE_SSC->SSC_THR = 0x43;
}
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
- SBYTE b;
- b = (SBYTE)AT91C_BASE_SSC->SSC_RHR;
+ int8_t b;
+ b = (int8_t)AT91C_BASE_SSC->SSC_RHR;
// The samples are correlations against I and Q versions of the
// tone that the tag AM-modulates, so every other sample is I,
// every other is Q. We just want power, so abs(I) + abs(Q) is
// close to what we want.
if(getNext) {
- SBYTE r;
+ int8_t r;
if(b < 0) {
r = -b;
r += prev;
}
- dest[c++] = (BYTE)r;
+ dest[c++] = (uint8_t)r;
if(c >= 20000) {
break;
}
}
-//////////////////////////////////////////
-/////////// DEMODULATE ///////////////////
-//////////////////////////////////////////
+ //////////////////////////////////////////
+ /////////// DEMODULATE ///////////////////
+ //////////////////////////////////////////
int i, j;
int max = 0, maxPos=0;
// greg - If correlation is less than 1 then there's little point in continuing
if ((max/(arraylen(FrameSOF)/skip)) >= 1) // THIS SHOULD BE 1
{
-
- i = maxPos + arraylen(FrameSOF)/skip;
-
- BYTE outBuf[20];
- memset(outBuf, 0, sizeof(outBuf));
- BYTE mask = 0x01;
- for(;;) {
- int corr0 = 0, corr1 = 0, corrEOF = 0;
- for(j = 0; j < arraylen(Logic0); j += skip) {
- corr0 += Logic0[j]*dest[i+(j/skip)];
- }
- for(j = 0; j < arraylen(Logic1); j += skip) {
- corr1 += Logic1[j]*dest[i+(j/skip)];
- }
- for(j = 0; j < arraylen(FrameEOF); j += skip) {
- corrEOF += FrameEOF[j]*dest[i+(j/skip)];
- }
- // Even things out by the length of the target waveform.
- corr0 *= 4;
- corr1 *= 4;
-
- if(corrEOF > corr1 && corrEOF > corr0) {
-// DbpString("EOF at %d", i);
- break;
- } else if(corr1 > corr0) {
- i += arraylen(Logic1)/skip;
- outBuf[k] |= mask;
- } else {
- i += arraylen(Logic0)/skip;
+
+ i = maxPos + arraylen(FrameSOF)/skip;
+
+ uint8_t outBuf[20];
+ memset(outBuf, 0, sizeof(outBuf));
+ uint8_t mask = 0x01;
+ for(;;) {
+ int corr0 = 0, corr1 = 0, corrEOF = 0;
+ for(j = 0; j < arraylen(Logic0); j += skip) {
+ corr0 += Logic0[j]*dest[i+(j/skip)];
+ }
+ for(j = 0; j < arraylen(Logic1); j += skip) {
+ corr1 += Logic1[j]*dest[i+(j/skip)];
+ }
+ for(j = 0; j < arraylen(FrameEOF); j += skip) {
+ corrEOF += FrameEOF[j]*dest[i+(j/skip)];
+ }
+ // Even things out by the length of the target waveform.
+ corr0 *= 4;
+ corr1 *= 4;
+
+ if(corrEOF > corr1 && corrEOF > corr0) {
+ // DbpString("EOF at %d", i);
+ break;
+ } else if(corr1 > corr0) {
+ i += arraylen(Logic1)/skip;
+ outBuf[k] |= mask;
+ } else {
+ i += arraylen(Logic0)/skip;
+ }
+ mask <<= 1;
+ if(mask == 0) {
+ k++;
+ mask = 0x01;
+ }
+ if((i+(int)arraylen(FrameEOF)) >= 2000) {
+ DbpString("ran off end!");
+ break;
+ }
}
- mask <<= 1;
- if(mask == 0) {
- k++;
- mask = 0x01;
+ if(mask != 0x01) {
+ DbpString("sniff: error, uneven octet! (discard extra bits!)");
+ /// DbpString(" mask=%02x", mask);
}
- if((i+(int)arraylen(FrameEOF)) >= 2000) {
- DbpString("ran off end!");
- break;
+ // uint8_t str1 [8];
+ // itoa(k,str1);
+ // strncat(str1," octets read",8);
+
+ // DbpString( str1); // DbpString("%d octets", k);
+
+ // for(i = 0; i < k; i+=3) {
+ // //DbpString("# %2d: %02x ", i, outBuf[i]);
+ // DbpIntegers(outBuf[i],outBuf[i+1],outBuf[i+2]);
+ // }
+
+ for(i = 0; i < k; i++) {
+ receivedResponse[i] = outBuf[i];
}
- }
- if(mask != 0x01) {
- DbpString("error, uneven octet! (discard extra bits!)");
-/// DbpString(" mask=%02x", mask);
- }
-// BYTE str1 [8];
-// itoa(k,str1);
-// strcat(str1," octets read");
-
-// DbpString( str1); // DbpString("%d octets", k);
-
-// for(i = 0; i < k; i+=3) {
-// //DbpString("# %2d: %02x ", i, outBuf[i]);
-// DbpIntegers(outBuf[i],outBuf[i+1],outBuf[i+2]);
-// }
-
- for(i = 0; i < k; i++) {
- receivedResponse[i] = outBuf[i];
- }
} // "end if correlation > 0" (max/(arraylen(FrameSOF)/skip))
return k; // return the number of bytes demodulated
/// DbpString("CRC=%04x", Iso15693Crc(outBuf, k-2));
}
+
+static void BuildIdentifyRequest(void);
//-----------------------------------------------------------------------------
// Start to read an ISO 15693 tag. We send an identify request, then wait
// for the response. The response is not demodulated, just left in the buffer
void AcquireRawAdcSamplesIso15693(void)
{
int c = 0;
- BYTE *dest = (BYTE *)BigBuf;
+ uint8_t *dest = (uint8_t *)BigBuf;
int getNext = 0;
- SBYTE prev = 0;
+ int8_t prev = 0;
BuildIdentifyRequest();
}
}
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
- volatile DWORD r = AT91C_BASE_SSC->SSC_RHR;
+ volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR;
(void)r;
}
WDT_HIT();
}
- FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
+
+ c = 0;
+ getNext = FALSE;
+ for(;;) {
+ if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
+ AT91C_BASE_SSC->SSC_THR = 0x43;
+ }
+ if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
+ int8_t b;
+ b = (int8_t)AT91C_BASE_SSC->SSC_RHR;
+
+ // The samples are correlations against I and Q versions of the
+ // tone that the tag AM-modulates, so every other sample is I,
+ // every other is Q. We just want power, so abs(I) + abs(Q) is
+ // close to what we want.
+ if(getNext) {
+ int8_t r;
+
+ if(b < 0) {
+ r = -b;
+ } else {
+ r = b;
+ }
+ if(prev < 0) {
+ r -= prev;
+ } else {
+ r += prev;
+ }
+
+ dest[c++] = (uint8_t)r;
+
+ if(c >= 2000) {
+ break;
+ }
+ } else {
+ prev = b;
+ }
+
+ getNext = !getNext;
+ }
+ }
+}
+
+
+void RecordRawAdcSamplesIso15693(void)
+{
+ int c = 0;
+ uint8_t *dest = (uint8_t *)BigBuf;
+ int getNext = 0;
+
+ int8_t prev = 0;
+
+ // Setup SSC
+ FpgaSetupSsc();
+
+ // Start from off (no field generated)
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ SpinDelay(200);
+
+ SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
+
+ SpinDelay(100);
+
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
+
+ c = 0;
+ getNext = FALSE;
+ for(;;) {
+ if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
+ AT91C_BASE_SSC->SSC_THR = 0x43;
+ }
+ if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
+ int8_t b;
+ b = (int8_t)AT91C_BASE_SSC->SSC_RHR;
+
+ // The samples are correlations against I and Q versions of the
+ // tone that the tag AM-modulates, so every other sample is I,
+ // every other is Q. We just want power, so abs(I) + abs(Q) is
+ // close to what we want.
+ if(getNext) {
+ int8_t r;
+
+ if(b < 0) {
+ r = -b;
+ } else {
+ r = b;
+ }
+ if(prev < 0) {
+ r -= prev;
+ } else {
+ r += prev;
+ }
+
+ dest[c++] = (uint8_t)r;
+
+ if(c >= 7000) {
+ break;
+ }
+ } else {
+ prev = b;
+ }
+
+ getNext = !getNext;
+ WDT_HIT();
+ }
+ }
+ Dbprintf("fin record");
+}
+
+
+// Initialize the proxmark as iso15k reader
+void Iso15693InitReader() {
+ LED_A_ON();
+ LED_B_ON();
+ LED_C_OFF();
+ LED_D_OFF();
+
+ // Setup SSC
+ FpgaSetupSsc();
+
+ // Start from off (no field generated)
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ SpinDelay(200);
+
+ SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
+ FpgaSetupSsc();
+
+ // Give the tags time to energize
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
+ SpinDelay(200);
+
+ LED_A_ON();
+ LED_B_OFF();
+ LED_C_OFF();
+ LED_D_OFF();
+}
+
+///////////////////////////////////////////////////////////////////////
+// ISO 15693 Part 3 - Air Interface
+// This section basicly contains transmission and receiving of bits
+///////////////////////////////////////////////////////////////////////
+
+// Encode (into the ToSend buffers) an identify request, which is the first
+// thing that you must send to a tag to get a response.
+static void BuildIdentifyRequest(void)
+{
+ uint8_t cmd[5];
+
+ uint16_t crc;
+ // one sub-carrier, inventory, 1 slot, fast rate
+ // AFI is at bit 5 (1<<4) when doing an INVENTORY
+ cmd[0] = (1 << 2) | (1 << 5) | (1 << 1);
+ // inventory command code
+ cmd[1] = 0x01;
+ // no mask
+ cmd[2] = 0x00;
+ //Now the CRC
+ crc = Crc(cmd, 3);
+ cmd[3] = crc & 0xff;
+ cmd[4] = crc >> 8;
+
+ CodeIso15693AsReader(cmd, sizeof(cmd));
+}
+
+// uid is in transmission order (which is reverse of display order)
+static void BuildReadBlockRequest(uint8_t *uid, uint8_t blockNumber )
+{
+ uint8_t cmd[13];
+
+ uint16_t crc;
+ // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
+ // followed by teh block data
+ // one sub-carrier, inventory, 1 slot, fast rate
+ cmd[0] = (1 << 6)| (1 << 5) | (1 << 1); // no SELECT bit, ADDR bit, OPTION bit
+ // READ BLOCK command code
+ cmd[1] = 0x20;
+ // UID may be optionally specified here
+ // 64-bit UID
+ cmd[2] = uid[0];
+ cmd[3] = uid[1];
+ cmd[4] = uid[2];
+ cmd[5] = uid[3];
+ cmd[6] = uid[4];
+ cmd[7] = uid[5];
+ cmd[8] = uid[6];
+ cmd[9] = uid[7]; // 0xe0; // always e0 (not exactly unique)
+ // Block number to read
+ cmd[10] = blockNumber;//0x00;
+ //Now the CRC
+ crc = Crc(cmd, 11); // the crc needs to be calculated over 12 bytes
+ cmd[11] = crc & 0xff;
+ cmd[12] = crc >> 8;
+
+ CodeIso15693AsReader(cmd, sizeof(cmd));
+}
+
+// Now the VICC>VCD responses when we are simulating a tag
+ static void BuildInventoryResponse(void)
+{
+ uint8_t cmd[12];
+
+ uint16_t crc;
+ // one sub-carrier, inventory, 1 slot, fast rate
+ // AFI is at bit 5 (1<<4) when doing an INVENTORY
+ cmd[0] = 0; //(1 << 2) | (1 << 5) | (1 << 1);
+ cmd[1] = 0;
+ // 64-bit UID
+ cmd[2] = 0x32;
+ cmd[3]= 0x4b;
+ cmd[4] = 0x03;
+ cmd[5] = 0x01;
+ cmd[6] = 0x00;
+ cmd[7] = 0x10;
+ cmd[8] = 0x05;
+ cmd[9]= 0xe0;
+ //Now the CRC
+ crc = Crc(cmd, 10);
+ cmd[10] = crc & 0xff;
+ cmd[11] = crc >> 8;
+
+ CodeIso15693AsReader(cmd, sizeof(cmd));
+}
- c = 0;
- getNext = FALSE;
- for(;;) {
- if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
- AT91C_BASE_SSC->SSC_THR = 0x43;
- }
- if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
- SBYTE b;
- b = (SBYTE)AT91C_BASE_SSC->SSC_RHR;
+// Universal Method for sending to and recv from a tag
+// init ... should we initialize the reader?
+// speed ... 0 low speed, 1 hi speed
+// **recv will return you a pointer to the received data
+// If you do not need the answer use NULL for *recv[]
+// return: lenght of received data
+int SendDataTag(uint8_t *send, int sendlen, int init, int speed, uint8_t **recv) {
- // The samples are correlations against I and Q versions of the
- // tone that the tag AM-modulates, so every other sample is I,
- // every other is Q. We just want power, so abs(I) + abs(Q) is
- // close to what we want.
- if(getNext) {
- SBYTE r;
+ int samples = 0;
+ int tsamples = 0;
+ int wait = 0;
+ int elapsed = 0;
+
+ LED_A_ON();
+ LED_B_ON();
+ LED_C_OFF();
+ LED_D_OFF();
+
+ int answerLen=0;
+ uint8_t *answer = (((uint8_t *)BigBuf) + 3660);
+ if (recv!=NULL) memset(BigBuf + 3660, 0, 100);
+
+ if (init) Iso15693InitReader();
+
+ if (!speed) {
+ // low speed (1 out of 256)
+ CodeIso15693AsReader256(send, sendlen);
+ } else {
+ // high speed (1 out of 4)
+ CodeIso15693AsReader(send, sendlen);
+ }
+
+ LED_A_ON();
+ LED_B_OFF();
+
+ TransmitTo15693Tag(ToSend,ToSendMax,&tsamples, &wait);
+ // Now wait for a response
+ if (recv!=NULL) {
+ LED_A_OFF();
+ LED_B_ON();
+ answerLen = GetIso15693AnswerFromTag(answer, 100, &samples, &elapsed) ;
+ *recv=answer;
+ }
- if(b < 0) {
- r = -b;
- } else {
- r = b;
- }
- if(prev < 0) {
- r -= prev;
- } else {
- r += prev;
- }
+ LED_A_OFF();
+ LED_B_OFF();
+ LED_C_OFF();
+ LED_D_OFF();
+
+ return answerLen;
+}
- dest[c++] = (BYTE)r;
- if(c >= 2000) {
+// --------------------------------------------------------------------
+// Debug Functions
+// --------------------------------------------------------------------
+
+// Decodes a message from a tag and displays its metadata and content
+#define DBD15STATLEN 48
+void DbdecodeIso15693Answer(int len, uint8_t *d) {
+ char status[DBD15STATLEN+1]={0};
+ uint16_t crc;
+
+ if (len>3) {
+ if (d[0]&(1<<3))
+ strncat(status,"ProtExt ",DBD15STATLEN);
+ if (d[0]&1) {
+ // error
+ strncat(status,"Error ",DBD15STATLEN);
+ switch (d[1]) {
+ case 0x01:
+ strncat(status,"01:notSupp",DBD15STATLEN);
break;
- }
- } else {
- prev = b;
+ case 0x02:
+ strncat(status,"02:notRecog",DBD15STATLEN);
+ break;
+ case 0x03:
+ strncat(status,"03:optNotSupp",DBD15STATLEN);
+ break;
+ case 0x0f:
+ strncat(status,"0f:noInfo",DBD15STATLEN);
+ break;
+ case 0x10:
+ strncat(status,"10:dontExist",DBD15STATLEN);
+ break;
+ case 0x11:
+ strncat(status,"11:lockAgain",DBD15STATLEN);
+ break;
+ case 0x12:
+ strncat(status,"12:locked",DBD15STATLEN);
+ break;
+ case 0x13:
+ strncat(status,"13:progErr",DBD15STATLEN);
+ break;
+ case 0x14:
+ strncat(status,"14:lockErr",DBD15STATLEN);
+ break;
+ default:
+ strncat(status,"unknownErr",DBD15STATLEN);
}
-
- getNext = !getNext;
+ strncat(status," ",DBD15STATLEN);
+ } else {
+ strncat(status,"NoErr ",DBD15STATLEN);
}
+
+ crc=Crc(d,len-2);
+ if ( (( crc & 0xff ) == d[len-2]) && (( crc >> 8 ) == d[len-1]) )
+ strncat(status,"CrcOK",DBD15STATLEN);
+ else
+ strncat(status,"CrcFail!",DBD15STATLEN);
+
+ Dbprintf("%s",status);
}
}
+
+
+///////////////////////////////////////////////////////////////////////
+// Functions called via USB/Client
+///////////////////////////////////////////////////////////////////////
+
+void SetDebugIso15693(uint32_t debug) {
+ DEBUG=debug;
+ Dbprintf("Iso15693 Debug is now %s",DEBUG?"on":"off");
+ return;
+}
+
+
+
//-----------------------------------------------------------------------------
// Simulate an ISO15693 reader, perform anti-collision and then attempt to read a sector
// all demodulation performed in arm rather than host. - greg
//-----------------------------------------------------------------------------
-void ReaderIso15693(DWORD parameter)
+void ReaderIso15693(uint32_t parameter)
{
LED_A_ON();
LED_B_ON();
//DbpString(parameter);
- //BYTE *answer0 = (((BYTE *)BigBuf) + 3560); // allow 100 bytes per reponse (way too much)
- BYTE *answer1 = (((BYTE *)BigBuf) + 3660); //
- BYTE *answer2 = (((BYTE *)BigBuf) + 3760);
- BYTE *answer3 = (((BYTE *)BigBuf) + 3860);
- //BYTE *TagUID= (((BYTE *)BigBuf) + 3960); // where we hold the uid for hi15reader
+ //uint8_t *answer0 = (((uint8_t *)BigBuf) + 3560); // allow 100 bytes per reponse (way too much)
+ uint8_t *answer1 = (((uint8_t *)BigBuf) + 3660); //
+ uint8_t *answer2 = (((uint8_t *)BigBuf) + 3760);
+ uint8_t *answer3 = (((uint8_t *)BigBuf) + 3860);
+ //uint8_t *TagUID= (((uint8_t *)BigBuf) + 3960); // where we hold the uid for hi15reader
// int answerLen0 = 0;
int answerLen1 = 0;
int answerLen2 = 0;
int answerLen3 = 0;
+ int i=0; // counter
// Blank arrays
memset(BigBuf + 3660, 0, 300);
// FIRST WE RUN AN INVENTORY TO GET THE TAG UID
// THIS MEANS WE CAN PRE-BUILD REQUESTS TO SAVE CPU TIME
- BYTE TagUID[7]; // where we hold the uid for hi15reader
+ uint8_t TagUID[8]; // where we hold the uid for hi15reader
// BuildIdentifyRequest();
// //TransmitTo15693Tag(ToSend,ToSendMax+3,&tsamples, &wait);
TagUID[4] = answer1[6];
TagUID[5] = answer1[7];
TagUID[6] = answer1[8]; // IC Manufacturer code
+ TagUID[7] = answer1[9]; // always E0
// Now send the SELECT command
- BuildSelectRequest(TagUID);
- TransmitTo15693Tag(ToSend,ToSendMax,&tsamples, &wait); // No longer ToSendMax+3
+ // since the SELECT command is optional, we should not rely on it.
+//// BuildSelectRequest(TagUID);
+// TransmitTo15693Tag(ToSend,ToSendMax,&tsamples, &wait); // No longer ToSendMax+3
// Now wait for a response
- answerLen2 = GetIso15693AnswerFromTag(answer2, 100, &samples, &elapsed);
+/// answerLen2 = GetIso15693AnswerFromTag(answer2, 100, &samples, &elapsed);
// Now send the MULTI READ command
// BuildArbitraryRequest(*TagUID,parameter);
- BuildArbitraryCustomRequest(TagUID,parameter);
+/// BuildArbitraryCustomRequest(TagUID,parameter);
// BuildReadBlockRequest(*TagUID,parameter);
// BuildSysInfoRequest(*TagUID);
//TransmitTo15693Tag(ToSend,ToSendMax+3,&tsamples, &wait);
- TransmitTo15693Tag(ToSend,ToSendMax,&tsamples, &wait); // No longer ToSendMax+3
+/// TransmitTo15693Tag(ToSend,ToSendMax,&tsamples, &wait); // No longer ToSendMax+3
// Now wait for a response
- answerLen3 = GetIso15693AnswerFromTag(answer3, 100, &samples, &elapsed) ;
+/// answerLen3 = GetIso15693AnswerFromTag(answer3, 100, &samples, &elapsed) ;
}
- Dbprintf("%d octets read from IDENTIFY request: %x %x %x %x %x %x %x %x %x", answerLen1,
- answer1[0], answer1[1], answer1[2],
- answer1[3], answer1[4], answer1[5],
- answer1[6], answer1[7], answer1[8]);
-
- Dbprintf("%d octets read from SELECT request: %x %x %x %x %x %x %x %x %x", answerLen2,
- answer2[0], answer2[1], answer2[2],
- answer2[3], answer2[4], answer2[5],
- answer2[6], answer2[7], answer2[8]);
-
- Dbprintf("%d octets read from XXX request: %x %x %x %x %x %x %x %x %x", answerLen3,
- answer3[0], answer3[1], answer3[2],
- answer3[3], answer3[4], answer3[5],
- answer3[6], answer3[7], answer3[8]);
-
+ Dbprintf("%d octets read from IDENTIFY request:", answerLen1);
+ DbdecodeIso15693Answer(answerLen1,answer1);
+ Dbhexdump(answerLen1,answer1);
+
+ // UID is reverse
+ if (answerLen1>=12)
+ //Dbprintf("UID = %*D",8,TagUID," ");
+ Dbprintf("UID = %02hX%02hX%02hX%02hX%02hX%02hX%02hX%02hX",TagUID[7],TagUID[6],TagUID[5],
+ TagUID[4],TagUID[3],TagUID[2],TagUID[1],TagUID[0]);
+
+
+ Dbprintf("%d octets read from SELECT request:", answerLen2);
+ DbdecodeIso15693Answer(answerLen2,answer2);
+ Dbhexdump(answerLen2,answer2);
+
+ Dbprintf("%d octets read from XXX request:", answerLen3);
+ DbdecodeIso15693Answer(answerLen3,answer3);
+ Dbhexdump(answerLen3,answer3);
+
+
+ // read all pages
+ if (answerLen1>=12 && DEBUG) {
+ i=0;
+ while (i<32) { // sanity check, assume max 32 pages
+ BuildReadBlockRequest(TagUID,i);
+ TransmitTo15693Tag(ToSend,ToSendMax,&tsamples, &wait);
+ answerLen2 = GetIso15693AnswerFromTag(answer2, 100, &samples, &elapsed);
+ if (answerLen2>0) {
+ Dbprintf("READ SINGLE BLOCK %d returned %d octets:",i,answerLen2);
+ DbdecodeIso15693Answer(answerLen2,answer2);
+ Dbhexdump(answerLen2,answer2);
+ if ( *((uint32_t*) answer2) == 0x07160101 ) break; // exit on NoPageErr
+ }
+ i++;
+ }
+ }
// str2[0]=0;
// for(i = 0; i < responseLen3; i++) {
// itoa(str1,receivedAnswer3[i]);
-// strcat(str2,str1);
+// strncat(str2,str1,8);
// }
// DbpString(str2);
LED_D_OFF();
}
-//-----------------------------------------------------------------------------
// Simulate an ISO15693 TAG, perform anti-collision and then print any reader commands
// all demodulation performed in arm rather than host. - greg
-//-----------------------------------------------------------------------------
-void SimTagIso15693(DWORD parameter)
+void SimTagIso15693(uint32_t parameter)
{
LED_A_ON();
LED_B_ON();
LED_C_OFF();
LED_D_OFF();
- BYTE *answer1 = (((BYTE *)BigBuf) + 3660); //
+ uint8_t *answer1 = (((uint8_t *)BigBuf) + 3660); //
int answerLen1 = 0;
// Blank arrays
LED_C_OFF();
LED_D_OFF();
}
+
+
+// Since there is no standardized way of reading the AFI out of a tag, we will brute force it
+// (some manufactures offer a way to read the AFI, though)
+void BruteforceIso15693Afi(uint32_t speed)
+{
+ uint8_t data[20];
+ uint8_t *recv=data;
+ int datalen=0, recvlen=0;
+
+ Iso15693InitReader();
+
+ // first without AFI
+ // Tags should respond wihtout AFI and with AFI=0 even when AFI is active
+
+ data[0]=ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH |
+ ISO15_REQ_INVENTORY | ISO15_REQINV_SLOT1;
+ data[1]=ISO15_CMD_INVENTORY;
+ data[2]=0; // mask length
+ datalen=AddCrc(data,3);
+ recvlen=SendDataTag(data,datalen,0,speed,&recv);
+ WDT_HIT();
+ if (recvlen>=12) {
+ Dbprintf("NoAFI UID=%s",sprintUID(NULL,&recv[2]));
+ }
+
+ // now with AFI
+
+ data[0]=ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH |
+ ISO15_REQ_INVENTORY | ISO15_REQINV_AFI | ISO15_REQINV_SLOT1;
+ data[1]=ISO15_CMD_INVENTORY;
+ data[2]=0; // AFI
+ data[3]=0; // mask length
+
+ for (int i=0;i<256;i++) {
+ data[2]=i & 0xFF;
+ datalen=AddCrc(data,4);
+ recvlen=SendDataTag(data,datalen,0,speed,&recv);
+ WDT_HIT();
+ if (recvlen>=12) {
+ Dbprintf("AFI=%i UID=%s",i,sprintUID(NULL,&recv[2]));
+ }
+ }
+ Dbprintf("AFI Bruteforcing done.");
+
+}
+
+// Allows to directly send commands to the tag via the client
+void DirectTag15693Command(uint32_t datalen,uint32_t speed, uint32_t recv, uint8_t data[]) {
+
+ int recvlen=0;
+ uint8_t *recvbuf=(uint8_t *)BigBuf;
+ UsbCommand n;
+
+ if (DEBUG) {
+ Dbprintf("SEND");
+ Dbhexdump(datalen,data);
+ }
+
+ recvlen=SendDataTag(data,datalen,1,speed,(recv?&recvbuf:NULL));
+
+ if (recv) {
+ n.cmd=/* CMD_ISO_15693_COMMAND_DONE */ CMD_ACK;
+ n.arg[0]=recvlen>48?48:recvlen;
+ memcpy(n.d.asBytes, recvbuf, 48);
+ LED_B_ON();
+ UsbSendPacket((uint8_t *)&n, sizeof(n));
+ LED_B_OFF();
+
+ if (DEBUG) {
+ Dbprintf("RECV");
+ DbdecodeIso15693Answer(recvlen,recvbuf);
+ Dbhexdump(recvlen,recvbuf);
+ }
+ }
+
+}
+
+
+
+
+// --------------------------------------------------------------------
+// -- Misc & deprecated functions
+// --------------------------------------------------------------------
+
+
+// do not use; has a fix UID
+static void __attribute__((unused)) BuildSysInfoRequest(uint8_t *uid)
+{
+ uint8_t cmd[12];
+
+ uint16_t crc;
+ // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
+ // followed by teh block data
+ // one sub-carrier, inventory, 1 slot, fast rate
+ cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit
+ // System Information command code
+ cmd[1] = 0x2B;
+ // UID may be optionally specified here
+ // 64-bit UID
+ cmd[2] = 0x32;
+ cmd[3]= 0x4b;
+ cmd[4] = 0x03;
+ cmd[5] = 0x01;
+ cmd[6] = 0x00;
+ cmd[7] = 0x10;
+ cmd[8] = 0x05;
+ cmd[9]= 0xe0; // always e0 (not exactly unique)
+ //Now the CRC
+ crc = Crc(cmd, 10); // the crc needs to be calculated over 2 bytes
+ cmd[10] = crc & 0xff;
+ cmd[11] = crc >> 8;
+
+ CodeIso15693AsReader(cmd, sizeof(cmd));
+}
+
+// do not use; has a fix UID
+static void __attribute__((unused)) BuildSelectRequest( uint8_t uid[])
+{
+
+// uid[6]=0x31; // this is getting ignored - the uid array is not happening...
+ uint8_t cmd[12];
+
+ uint16_t crc;
+ // one sub-carrier, inventory, 1 slot, fast rate
+ //cmd[0] = (1 << 2) | (1 << 5) | (1 << 1); // INVENTROY FLAGS
+ cmd[0] = (1 << 4) | (1 << 5) | (1 << 1); // Select and addressed FLAGS
+ // SELECT command code
+ cmd[1] = 0x25;
+ // 64-bit UID
+// cmd[2] = uid[0];//0x32;
+// cmd[3]= uid[1];//0x4b;
+// cmd[4] = uid[2];//0x03;
+// cmd[5] = uid[3];//0x01;
+// cmd[6] = uid[4];//0x00;
+// cmd[7] = uid[5];//0x10;
+// cmd[8] = uid[6];//0x05;
+ cmd[2] = 0x32;//
+ cmd[3] = 0x4b;
+ cmd[4] = 0x03;
+ cmd[5] = 0x01;
+ cmd[6] = 0x00;
+ cmd[7] = 0x10;
+ cmd[8] = 0x05; // infineon?
+
+ cmd[9]= 0xe0; // always e0 (not exactly unique)
+
+// DbpIntegers(cmd[8],cmd[7],cmd[6]);
+ // Now the CRC
+ crc = Crc(cmd, 10); // the crc needs to be calculated over 10 bytes
+ cmd[10] = crc & 0xff;
+ cmd[11] = crc >> 8;
+
+ CodeIso15693AsReader(cmd, sizeof(cmd));
+}
+
+
+
+// do not use; has a fix UID
+static void __attribute__((unused)) BuildReadMultiBlockRequest(uint8_t *uid)
+{
+ uint8_t cmd[14];
+
+ uint16_t crc;
+ // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
+ // followed by teh block data
+ // one sub-carrier, inventory, 1 slot, fast rate
+ cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit
+ // READ Multi BLOCK command code
+ cmd[1] = 0x23;
+ // UID may be optionally specified here
+ // 64-bit UID
+ cmd[2] = 0x32;
+ cmd[3]= 0x4b;
+ cmd[4] = 0x03;
+ cmd[5] = 0x01;
+ cmd[6] = 0x00;
+ cmd[7] = 0x10;
+ cmd[8] = 0x05;
+ cmd[9]= 0xe0; // always e0 (not exactly unique)
+ // First Block number to read
+ cmd[10] = 0x00;
+ // Number of Blocks to read
+ cmd[11] = 0x2f; // read quite a few
+ //Now the CRC
+ crc = Crc(cmd, 12); // the crc needs to be calculated over 2 bytes
+ cmd[12] = crc & 0xff;
+ cmd[13] = crc >> 8;
+
+ CodeIso15693AsReader(cmd, sizeof(cmd));
+}
+
+// do not use; has a fix UID
+static void __attribute__((unused)) BuildArbitraryRequest(uint8_t *uid,uint8_t CmdCode)
+{
+ uint8_t cmd[14];
+
+ uint16_t crc;
+ // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
+ // followed by teh block data
+ // one sub-carrier, inventory, 1 slot, fast rate
+ cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit
+ // READ BLOCK command code
+ cmd[1] = CmdCode;
+ // UID may be optionally specified here
+ // 64-bit UID
+ cmd[2] = 0x32;
+ cmd[3]= 0x4b;
+ cmd[4] = 0x03;
+ cmd[5] = 0x01;
+ cmd[6] = 0x00;
+ cmd[7] = 0x10;
+ cmd[8] = 0x05;
+ cmd[9]= 0xe0; // always e0 (not exactly unique)
+ // Parameter
+ cmd[10] = 0x00;
+ cmd[11] = 0x0a;
+
+// cmd[12] = 0x00;
+// cmd[13] = 0x00; //Now the CRC
+ crc = Crc(cmd, 12); // the crc needs to be calculated over 2 bytes
+ cmd[12] = crc & 0xff;
+ cmd[13] = crc >> 8;
+
+ CodeIso15693AsReader(cmd, sizeof(cmd));
+}
+
+// do not use; has a fix UID
+static void __attribute__((unused)) BuildArbitraryCustomRequest(uint8_t uid[], uint8_t CmdCode)
+{
+ uint8_t cmd[14];
+
+ uint16_t crc;
+ // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
+ // followed by teh block data
+ // one sub-carrier, inventory, 1 slot, fast rate
+ cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit
+ // READ BLOCK command code
+ cmd[1] = CmdCode;
+ // UID may be optionally specified here
+ // 64-bit UID
+ cmd[2] = 0x32;
+ cmd[3]= 0x4b;
+ cmd[4] = 0x03;
+ cmd[5] = 0x01;
+ cmd[6] = 0x00;
+ cmd[7] = 0x10;
+ cmd[8] = 0x05;
+ cmd[9]= 0xe0; // always e0 (not exactly unique)
+ // Parameter
+ cmd[10] = 0x05; // for custom codes this must be manufcturer code
+ cmd[11] = 0x00;
+
+// cmd[12] = 0x00;
+// cmd[13] = 0x00; //Now the CRC
+ crc = Crc(cmd, 12); // the crc needs to be calculated over 2 bytes
+ cmd[12] = crc & 0xff;
+ cmd[13] = crc >> 8;
+
+ CodeIso15693AsReader(cmd, sizeof(cmd));
+}
+
+
+
+
+
+
+
projects / proxmark3-svn / blobdiff