Redesign of lf hid card format handler as discussed with @marshmellow42

[proxmark3-svn] / tools / at91sam7s256-jtagkey.cfg

diff --git a/tools/at91sam7s256-jtagkey.cfg b/tools/at91sam7s256-jtagkey.cfg
index 6798d99ee69f2b9b3a225ef1861a6ac28c744211..2c32b7955fdf09a1c6bde0fa14587fc2ba404f42 100644 (file)
--- a/tools/at91sam7s256-jtagkey.cfg
+++ b/tools/at91sam7s256-jtagkey.cfg
@@ -1,27 +1,24 @@
-#define our ports\r
-telnet_port 4444\r
-gdb_port 3333\r
-\r
-#commands specific to the Amontec JTAGKey\r
-interface ft2232\r
-ft2232_device_desc "Amontec JTAGkey A"\r
-ft2232_layout jtagkey\r
-ft2232_vid_pid 0x0403 0xcff8\r
-jtag_speed 2\r
-jtag_nsrst_delay 200\r
-jtag_ntrst_delay 200\r
-\r
-#reset_config <signals> [combination] [trst_type] [srst_type]\r
-reset_config srst_only srst_pulls_trst\r
-\r
-#jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>\r
-jtag_device 4 0x1 0xf 0xe\r
-\r
-#daemon_startup <'attach'|'reset'>\r
-daemon_startup reset\r
-\r
-#target <type> <endianess> <reset_mode> <jtag#> [variant]\r
-target arm7tdmi little run_and_halt 0 arm7tdmi\r
-\r
-#run_and_halt_time <target#> <time_in_ms>\r
-run_and_halt_time 0 30\r
+#define our ports
+telnet_port 4444
+gdb_port 3333
+
+#commands specific to the Amontec JTAGKey
+interface ft2232
+ft2232_device_desc "Amontec JTAGkey A"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+jtag_khz 200
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
+#reset_config <signals> [combination] [trst_type] [srst_type]
+reset_config srst_only srst_pulls_trst
+
+jtag newtap sam7x256 cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x3f0f0f0f
+
+target create sam7x256.cpu arm7tdmi -endian little -chain-position sam7x256.cpu -variant arm7tdmi
+
+gdb_memory_map enable
+
+sam7x256.cpu configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x10000 -work-area-backup 0
+flash bank at91sam7 0x100000 0x40000 0 4 sam7x256.cpu