]> git.zerfleddert.de Git - proxmark3-svn/blobdiff - client/flash.c
Applied Holiman's fixes for iclass.c and CSNs
[proxmark3-svn] / client / flash.c
index 3a0a1cda61b8564fdad3012cddf4f7b88496d6a2..7976d41098178f10db1780bf0685b87be6f78420 100644 (file)
 #include <stdlib.h>
 #include "proxmark3.h"
 #include "sleep.h"
-//#include "proxusb.h"
 #include "flash.h"
 #include "elf.h"
 #include "proxendian.h"
-#include "usb_cmd.h"
+#include "../include/usb_cmd.h"
 
 void SendCommand(UsbCommand* txcmd);
 void ReceiveCommand(UsbCommand* rxcmd);
@@ -276,8 +275,7 @@ static int get_proxmark_state(uint32_t *state)
 {
        UsbCommand c;
        c.cmd = CMD_DEVICE_INFO;
-//     SendCommand_(&c);
-  SendCommand(&c);
+       SendCommand(&c);
        UsbCommand resp;
        ReceiveCommand(&resp);
 
@@ -391,7 +389,6 @@ int flash_start_flashing(int enable_bl_writes,char *serial_port_name)
                        c.arg[2] = 0;
                }
                SendCommand(&c);
-//             SendCommand_(&c);
                return wait_for_ack();
        } else {
                fprintf(stderr, "Note: Your bootloader does not understand the new START_FLASH command\n");
@@ -407,25 +404,11 @@ static int write_block(uint32_t address, uint8_t *data, uint32_t length)
 
        memset(block_buf, 0xFF, BLOCK_SIZE);
        memcpy(block_buf, data, length);
-  UsbCommand c;
-/*
-       c.cmd = {CMD_SETUP_WRITE};
-       for (int i = 0; i < 240; i += 48) {
-               memcpy(c.d.asBytes, block_buf + i, 48);
-               c.arg[0] = i / 4;
-               SendCommand(&c);
-//             SendCommand_(&c);
-               if (wait_for_ack() < 0) {
-                       return -1;
-    }
-       }
-*/
+       UsbCommand c;
        c.cmd = CMD_FINISH_WRITE;
        c.arg[0] = address;
-//     memcpy(c.d.asBytes, block_buf+240, 16);
-//     SendCommand_(&c);
        memcpy(c.d.asBytes, block_buf, length);
-  SendCommand(&c);
+       SendCommand(&c);
   return wait_for_ack();
 }
 
@@ -486,8 +469,7 @@ void flash_free(flash_file_t *ctx)
 // just reset the unit
 int flash_stop_flashing(void) {
        UsbCommand c = {CMD_HARDWARE_RESET};
-//     SendCommand_(&c);
-  SendCommand(&c);
-  msleep(100);
-  return 0;
+       SendCommand(&c);
+       msleep(100);
+       return 0;
 }
Impressum, Datenschutz