]> git.zerfleddert.de Git - proxmark3-svn/blobdiff - armsrc/lfops.c
Fixed several issues found using a coverity-scan
[proxmark3-svn] / armsrc / lfops.c
index 17d293edcd6925b432a56fdb45854dd061e3a3a7..74f04913e6e66760e5a617860110e412dd900192 100644 (file)
 #include "crc16.h"
 #include "string.h"
 
 #include "crc16.h"
 #include "string.h"
 
-void AcquireRawAdcSamples125k(int at134khz)
-{
-       if (at134khz)
-               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
-       else
-               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
-
-       // Connect the A/D to the peak-detected low-frequency path.
-       SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-
-       // Give it a bit of time for the resonant antenna to settle.
-       SpinDelay(50);
 
 
-       // Now set up the SSC to get the ADC samples that are now streaming at us.
-       FpgaSetupSsc();
-
-       // Now call the acquisition routine
-       DoAcquisition125k();
-}
-
-// split into two routines so we can avoid timing issues after sending commands //
-void DoAcquisition125k(void)
+/**
+* Does the sample acquisition. If threshold is specified, the actual sampling 
+* is not commenced until the threshold has been reached. 
+* @param trigger_threshold - the threshold
+* @param silent - is true, now outputs are made. If false, dbprints the status
+*/
+void DoAcquisition125k_internal(int trigger_threshold,bool silent)
 {
        uint8_t *dest = (uint8_t *)BigBuf;
        int n = sizeof(BigBuf);
 {
        uint8_t *dest = (uint8_t *)BigBuf;
        int n = sizeof(BigBuf);
@@ -53,38 +37,95 @@ void DoAcquisition125k(void)
                }
                if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
                        dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
                }
                if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
                        dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-                       i++;
                        LED_D_OFF();
                        LED_D_OFF();
-                       if (i >= n) break;
+                       if (trigger_threshold != -1 && dest[i] < trigger_threshold)
+                               continue;
+                       else
+                               trigger_threshold = -1;
+                       if (++i >= n) break;
                }
        }
                }
        }
-       Dbprintf("buffer samples: %02x %02x %02x %02x %02x %02x %02x %02x ...",
-                       dest[0], dest[1], dest[2], dest[3], dest[4], dest[5], dest[6], dest[7]);
+       if(!silent)
+       {
+               Dbprintf("buffer samples: %02x %02x %02x %02x %02x %02x %02x %02x ...",
+                               dest[0], dest[1], dest[2], dest[3], dest[4], dest[5], dest[6], dest[7]);
+               
+       }
+}
+/**
+* Perform sample aquisition. 
+*/
+void DoAcquisition125k(int trigger_threshold)
+{
+       DoAcquisition125k_internal(trigger_threshold, false);
+}
+
+/**
+* Setup the FPGA to listen for samples. This method downloads the FPGA bitstream 
+* if not already loaded, sets divisor and starts up the antenna. 
+* @param divisor : 1, 88> 255 or negative ==> 134.8 KHz
+*                                 0 or 95 ==> 125 KHz
+*                                 
+**/
+void LFSetupFPGAForADC(int divisor, bool lf_field)
+{
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+       if ( (divisor == 1) || (divisor < 0) || (divisor > 255) )
+               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
+       else if (divisor == 0)
+               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+       else
+               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor);
+
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | (lf_field ? FPGA_LF_ADC_READER_FIELD : 0));
+
+       // Connect the A/D to the peak-detected low-frequency path.
+       SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
+       // Give it a bit of time for the resonant antenna to settle.
+       SpinDelay(50);
+       // Now set up the SSC to get the ADC samples that are now streaming at us.
+       FpgaSetupSsc();
+}
+/**
+* Initializes the FPGA, and acquires the samples. 
+**/
+void AcquireRawAdcSamples125k(int divisor)
+{
+       LFSetupFPGAForADC(divisor, true);
+       // Now call the acquisition routine
+       DoAcquisition125k_internal(-1,false);
+}
+/**
+* Initializes the FPGA for snoop-mode, and acquires the samples. 
+**/
+
+void SnoopLFRawAdcSamples(int divisor, int trigger_threshold)
+{
+       LFSetupFPGAForADC(divisor, false);
+       DoAcquisition125k(trigger_threshold);
 }
 
 void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, uint8_t *command)
 {
 }
 
 void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, uint8_t *command)
 {
-       int at134khz;
 
        /* Make sure the tag is reset */
 
        /* Make sure the tag is reset */
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        SpinDelay(2500);
 
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        SpinDelay(2500);
 
+
+       int divisor_used = 95; // 125 KHz
        // see if 'h' was specified
        // see if 'h' was specified
-       if (command[strlen((char *) command) - 1] == 'h')
-               at134khz = TRUE;
-       else
-               at134khz = FALSE;
 
 
-       if (at134khz)
-               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
-       else
-               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+       if (command[strlen((char *) command) - 1] == 'h')
+               divisor_used = 88; // 134.8 KHz
 
 
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
 
 
+       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); 
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
        // Give it a bit of time for the resonant antenna to settle.
        SpinDelay(50);
        // Give it a bit of time for the resonant antenna to settle.
        SpinDelay(50);
+
        // And a little more time for the tag to fully power up
        SpinDelay(2000);
 
        // And a little more time for the tag to fully power up
        SpinDelay(2000);
 
@@ -96,12 +137,9 @@ void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1,
                FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
                LED_D_OFF();
                SpinDelayUs(delay_off);
                FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
                LED_D_OFF();
                SpinDelayUs(delay_off);
-               if (at134khz)
-                       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
-               else
-                       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); 
 
 
-               FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+               FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
                LED_D_ON();
                if(*(command++) == '0')
                        SpinDelayUs(period_0);
                LED_D_ON();
                if(*(command++) == '0')
                        SpinDelayUs(period_0);
@@ -111,15 +149,12 @@ void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1,
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        LED_D_OFF();
        SpinDelayUs(delay_off);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        LED_D_OFF();
        SpinDelayUs(delay_off);
-       if (at134khz)
-               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
-       else
-               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); 
 
 
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 
        // now do the read
 
        // now do the read
-       DoAcquisition125k();
+       DoAcquisition125k(-1);
 }
 
 /* blank r/w tag data stream
 }
 
 /* blank r/w tag data stream
@@ -156,6 +191,7 @@ void ReadTItag(void)
        uint32_t threshold = (sampleslo - sampleshi + 1)>>1;
 
        // TI tags charge at 134.2Khz
        uint32_t threshold = (sampleslo - sampleshi + 1)>>1;
 
        // TI tags charge at 134.2Khz
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
 
        // Place FPGA in passthrough mode, in this mode the CROSS_LO line
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
 
        // Place FPGA in passthrough mode, in this mode the CROSS_LO line
@@ -363,6 +399,7 @@ void AcquireTiType(void)
 // if not provided a valid crc will be computed from the data and written.
 void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
 {
 // if not provided a valid crc will be computed from the data and written.
 void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
 {
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);   
        if(crc == 0) {
                crc = update_crc16(crc, (idlo)&0xff);
                crc = update_crc16(crc, (idlo>>8)&0xff);
        if(crc == 0) {
                crc = update_crc16(crc, (idlo)&0xff);
                crc = update_crc16(crc, (idlo>>8)&0xff);
@@ -434,6 +471,7 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
        int i;
        uint8_t *tab = (uint8_t *)BigBuf;
     
        int i;
        uint8_t *tab = (uint8_t *)BigBuf;
     
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
     
        AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
     
        AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
@@ -592,217 +630,243 @@ void CmdHIDsimTAG(int hi, int lo, int ledcontrol)
                LED_A_OFF();
 }
 
                LED_A_OFF();
 }
 
-
-// loop to capture raw HID waveform then FSK demodulate the TAG ID from it
-void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
+size_t fsk_demod(uint8_t * dest, size_t size)
 {
 {
-       uint8_t *dest = (uint8_t *)BigBuf;
-       int m=0, n=0, i=0, idx=0, found=0, lastval=0;
-  uint32_t hi2=0, hi=0, lo=0;
+       uint32_t last_transition = 0;
+       uint32_t idx = 1;
 
 
-       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+       // we don't care about actual value, only if it's more or less than a
+       // threshold essentially we capture zero crossings for later analysis
+       uint8_t threshold_value = 127;
 
 
-       // Connect the A/D to the peak-detected low-frequency path.
-       SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
+       // sync to first lo-hi transition, and threshold
 
 
-       // Give it a bit of time for the resonant antenna to settle.
-       SpinDelay(50);
+       //Need to threshold first sample
+       if(dest[0] < threshold_value) dest[0] = 0;
+       else dest[0] = 1;
 
 
-       // Now set up the SSC to get the ADC samples that are now streaming at us.
-       FpgaSetupSsc();
+       size_t numBits = 0;
+       // count cycles between consecutive lo-hi transitions, there should be either 8 (fc/8)
+       // or 10 (fc/10) cycles but in practice due to noise etc we may end up with with anywhere
+       // between 7 to 11 cycles so fuzz it by treat anything <9 as 8 and anything else as 10
+       for(idx = 1; idx < size; idx++) {
+               // threshold current value
+               if (dest[idx] < threshold_value) dest[idx] = 0;
+               else dest[idx] = 1;
 
 
-       for(;;) {
-               WDT_HIT();
-               if (ledcontrol)
-                       LED_A_ON();
-               if(BUTTON_PRESS()) {
-                       DbpString("Stopped");
-                       if (ledcontrol)
-                               LED_A_OFF();
-                       return;
-               }
+               // Check for 0->1 transition
+               if (dest[idx-1] < dest[idx]) { // 0 -> 1 transition
 
 
-               i = 0;
-               m = sizeof(BigBuf);
-               memset(dest,128,m);
-               for(;;) {
-                       if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
-                               AT91C_BASE_SSC->SSC_THR = 0x43;
-                               if (ledcontrol)
-                                       LED_D_ON();
-                       }
-                       if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
-                               dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-                               // we don't care about actual value, only if it's more or less than a
-                               // threshold essentially we capture zero crossings for later analysis
-                               if(dest[i] < 127) dest[i] = 0; else dest[i] = 1;
-                               i++;
-                               if (ledcontrol)
-                                       LED_D_OFF();
-                               if(i >= m) {
-                                       break;
-                               }
+                       if (idx-last_transition <  9) {
+                                       dest[numBits]=1;
+                       } else {
+                                       dest[numBits]=0;
                        }
                        }
+                       last_transition = idx;
+                       numBits++;
                }
                }
+       }
+       return numBits; //Actually, it returns the number of bytes, but each byte represents a bit: 1 or 0
+}
 
 
-               // FSK demodulator
 
 
-               // sync to first lo-hi transition
-               for( idx=1; idx<m; idx++) {
-                       if (dest[idx-1]<dest[idx])
-                               lastval=idx;
-                               break;
-               }
-               WDT_HIT();
+size_t aggregate_bits(uint8_t *dest,size_t size, uint8_t h2l_crossing_value,uint8_t l2h_crossing_value, uint8_t maxConsequtiveBits )
+{
+       uint8_t lastval=dest[0];
+       uint32_t idx=0;
+       size_t numBits=0;
+       uint32_t n=1;
 
 
-               // count cycles between consecutive lo-hi transitions, there should be either 8 (fc/8)
-               // or 10 (fc/10) cycles but in practice due to noise etc we may end up with with anywhere
-               // between 7 to 11 cycles so fuzz it by treat anything <9 as 8 and anything else as 10
-               for( i=0; idx<m; idx++) {
-                       if (dest[idx-1]<dest[idx]) {
-                               dest[i]=idx-lastval;
-                               if (dest[i] <= 8) {
-                                               dest[i]=1;
-                               } else {
-                                               dest[i]=0;
-                               }
+       for( idx=1; idx < size; idx++) {
 
 
-                               lastval=idx;
-                               i++;
-                       }
+               if (dest[idx]==lastval) {
+                       n++;
+                       continue;
                }
                }
-               m=i;
+               //if lastval was 1, we have a 1->0 crossing
+               if ( dest[idx-1] ) {
+                       n=(n+1) / h2l_crossing_value;
+               } else {// 0->1 crossing
+                       n=(n+1) / l2h_crossing_value;
+               }
+               if (n == 0) n = 1;
+
+               if(n < maxConsequtiveBits)
+               {
+                       memset(dest+numBits, dest[idx-1] , n);
+                       numBits += n;
+               }
+               n=0;
+               lastval=dest[idx];
+       }//end for
+
+       return numBits;
+
+}
+// loop to capture raw HID waveform then FSK demodulate the TAG ID from it
+void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
+{
+       uint8_t *dest = (uint8_t *)BigBuf;
+
+       size_t size=0,idx=0; //, found=0;
+       uint32_t hi2=0, hi=0, lo=0;
+
+       // Configure to go in 125Khz listen mode
+       LFSetupFPGAForADC(95, true);
+
+       while(!BUTTON_PRESS()) {
+
                WDT_HIT();
                WDT_HIT();
+               if (ledcontrol) LED_A_ON();
+
+               DoAcquisition125k_internal(-1,true);
+               size  = sizeof(BigBuf);
+
+               // FSK demodulator
+               size = fsk_demod(dest, size);
 
                // we now have a set of cycle counts, loop over previous results and aggregate data into bit patterns
 
                // we now have a set of cycle counts, loop over previous results and aggregate data into bit patterns
-               lastval=dest[0];
-               idx=0;
-               i=0;
-               n=0;
-               for( idx=0; idx<m; idx++) {
-                       if (dest[idx]==lastval) {
-                               n++;
-                       } else {
-                               // a bit time is five fc/10 or six fc/8 cycles so figure out how many bits a pattern width represents,
-                               // an extra fc/8 pattern preceeds every 4 bits (about 200 cycles) just to complicate things but it gets
-                               // swallowed up by rounding
-                               // expected results are 1 or 2 bits, any more and it's an invalid manchester encoding
-                               // special start of frame markers use invalid manchester states (no transitions) by using sequences
-                               // like 111000
-                               if (dest[idx-1]) {
-                                       n=(n+1)/6;                      // fc/8 in sets of 6
-                               } else {
-                                       n=(n+1)/5;                      // fc/10 in sets of 5
-                               }
-                               switch (n) {                    // stuff appropriate bits in buffer
-                                       case 0:
-                                       case 1: // one bit
-                                               dest[i++]=dest[idx-1];
-                                               break;
-                                       case 2: // two bits
-                                               dest[i++]=dest[idx-1];
-                                               dest[i++]=dest[idx-1];
-                                               break;
-                                       case 3: // 3 bit start of frame markers
-                                               dest[i++]=dest[idx-1];
-                                               dest[i++]=dest[idx-1];
-                                               dest[i++]=dest[idx-1];
-                                               break;
-                                       // When a logic 0 is immediately followed by the start of the next transmisson
-                                       // (special pattern) a pattern of 4 bit duration lengths is created.
-                                       case 4:
-                                               dest[i++]=dest[idx-1];
-                                               dest[i++]=dest[idx-1];
-                                               dest[i++]=dest[idx-1];
-                                               dest[i++]=dest[idx-1];
-                                               break;
-                                       default:        // this shouldn't happen, don't stuff any bits
-                                               break;
-                               }
-                               n=0;
-                               lastval=dest[idx];
-                       }
-               }
-               m=i;
+               // 1->0 : fc/8 in sets of 6
+               // 0->1 : fc/10 in sets of 5
+               size = aggregate_bits(dest,size, 6,5,5);
+
                WDT_HIT();
 
                // final loop, go over previously decoded manchester data and decode into usable tag ID
                // 111000 bit pattern represent start of frame, 01 pattern represents a 1 and 10 represents a 0
                WDT_HIT();
 
                // final loop, go over previously decoded manchester data and decode into usable tag ID
                // 111000 bit pattern represent start of frame, 01 pattern represents a 1 and 10 represents a 0
-               for( idx=0; idx<m-6; idx++) {
+               uint8_t frame_marker_mask[] = {1,1,1,0,0,0};
+               int numshifts = 0;
+               idx = 0;
+               while( idx + sizeof(frame_marker_mask) < size) {
                        // search for a start of frame marker
                        // search for a start of frame marker
-                       if ( dest[idx] && dest[idx+1] && dest[idx+2] && (!dest[idx+3]) && (!dest[idx+4]) && (!dest[idx+5]) )
-                       {
-                               found=1;
-                               idx+=6;
-        if (found && (hi2|hi|lo)) {
-          if (hi2 != 0){
-            Dbprintf("TAG ID: %x%08x%08x (%d)",
-                     (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
-          }
-          else {
-            Dbprintf("TAG ID: %x%08x (%d)",
-                     (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
-          }
-                                       /* if we're only looking for one tag */
-                                       if (findone)
-                                       {
-                                               *high = hi;
-                                               *low = lo;
-                                               return;
-                                       }
-          hi2=0;
-                                       hi=0;
-                                       lo=0;
-                                       found=0;
-                               }
-                       }
-                       if (found) {
-                               if (dest[idx] && (!dest[idx+1]) ) {
-          hi2=(hi2<<1)|(hi>>31);
-                                       hi=(hi<<1)|(lo>>31);
-                                       lo=(lo<<1)|0;
-                               } else if ( (!dest[idx]) && dest[idx+1]) {
-          hi2=(hi2<<1)|(hi>>31);
-                                       hi=(hi<<1)|(lo>>31);
-                                       lo=(lo<<1)|1;
-                               } else {
-                                       found=0;
-          hi2=0;
-                                       hi=0;
-                                       lo=0;
+                       if ( memcmp(dest+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0)
+                       { // frame marker found
+                               idx+=sizeof(frame_marker_mask);
+
+                               while(dest[idx] != dest[idx+1] && idx < size-2)
+                               {       
+                                       // Keep going until next frame marker (or error)
+                                       // Shift in a bit. Start by shifting high registers
+                                       hi2 = (hi2<<1)|(hi>>31);
+                                       hi = (hi<<1)|(lo>>31);
+                                       //Then, shift in a 0 or one into low
+                                       if (dest[idx] && !dest[idx+1])  // 1 0
+                                               lo=(lo<<1)|0;
+                                       else // 0 1
+                                               lo=(lo<<1)|
+                                                               1;
+                                       numshifts ++;
+                                       idx += 2;
                                }
                                }
-                               idx++;
-                       }
-                       if ( dest[idx] && dest[idx+1] && dest[idx+2] && (!dest[idx+3]) && (!dest[idx+4]) && (!dest[idx+5]) )
-                       {
-                               found=1;
-                               idx+=6;
-                               if (found && (hi|lo)) {
-          if (hi2 != 0){
-            Dbprintf("TAG ID: %x%08x%08x (%d)",
-                     (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
-          }
-          else {
-            Dbprintf("TAG ID: %x%08x (%d)",
-                     (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
-          }
-                                       /* if we're only looking for one tag */
-                                       if (findone)
+                               //Dbprintf("Num shifts: %d ", numshifts);
+                               // Hopefully, we read a tag and  hit upon the next frame marker
+                               if(idx + sizeof(frame_marker_mask) < size)
+                               {
+                                       if ( memcmp(dest+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0)
                                        {
                                        {
-                                               *high = hi;
-                                               *low = lo;
-                                               return;
+                                               if (hi2 != 0){
+                                                       Dbprintf("TAG ID: %x%08x%08x (%d)",
+                                                                (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
+                                               }
+                                               else {
+                                                       Dbprintf("TAG ID: %x%08x (%d)",
+                                                        (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
+                                               }
                                        }
                                        }
-          hi2=0;
-                                       hi=0;
-                                       lo=0;
-                                       found=0;
+
                                }
                                }
+
+                               // reset
+                               hi2 = hi = lo = 0;
+                               numshifts = 0;
+                       }else
+                       {
+                               idx++;
                        }
                }
                WDT_HIT();
                        }
                }
                WDT_HIT();
+
+       }
+       DbpString("Stopped");
+       if (ledcontrol) LED_A_OFF();
+}
+
+uint32_t bytebits_to_byte(uint8_t* src, int numbits)
+{
+       uint32_t num = 0;
+       for(int i = 0 ; i < numbits ; i++)
+       {
+               num = (num << 1) | (*src);
+               src++;
+       }
+       return num;
+}
+
+
+void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
+{
+       uint8_t *dest = (uint8_t *)BigBuf;
+
+       size_t size=0, idx=0;
+       uint32_t code=0, code2=0;
+
+       // Configure to go in 125Khz listen mode
+       LFSetupFPGAForADC(95, true);
+
+       while(!BUTTON_PRESS()) {
+
+
+               WDT_HIT();
+               if (ledcontrol) LED_A_ON();
+
+               DoAcquisition125k_internal(-1,true);
+               size  = sizeof(BigBuf);
+
+               // FSK demodulator
+               size = fsk_demod(dest, size);
+
+               // we now have a set of cycle counts, loop over previous results and aggregate data into bit patterns
+               // 1->0 : fc/8 in sets of 7
+               // 0->1 : fc/10 in sets of 6
+               size = aggregate_bits(dest, size, 7,6,13);
+
+               WDT_HIT();
+               
+               //Handle the data
+           uint8_t mask[] = {0,0,0,0,0,0,0,0,0,1};
+               for( idx=0; idx < size - 64; idx++) {
+
+               if ( memcmp(dest + idx, mask, sizeof(mask)) ) continue;
+
+                   Dbprintf("%d%d%d%d%d%d%d%d",dest[idx],   dest[idx+1],   dest[idx+2],dest[idx+3],dest[idx+4],dest[idx+5],dest[idx+6],dest[idx+7]);
+                   Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+8], dest[idx+9], dest[idx+10],dest[idx+11],dest[idx+12],dest[idx+13],dest[idx+14],dest[idx+15]);                         
+                   Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+16],dest[idx+17],dest[idx+18],dest[idx+19],dest[idx+20],dest[idx+21],dest[idx+22],dest[idx+23]);
+                   Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+24],dest[idx+25],dest[idx+26],dest[idx+27],dest[idx+28],dest[idx+29],dest[idx+30],dest[idx+31]);
+                   Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+32],dest[idx+33],dest[idx+34],dest[idx+35],dest[idx+36],dest[idx+37],dest[idx+38],dest[idx+39]);
+                   Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+40],dest[idx+41],dest[idx+42],dest[idx+43],dest[idx+44],dest[idx+45],dest[idx+46],dest[idx+47]);
+                   Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+48],dest[idx+49],dest[idx+50],dest[idx+51],dest[idx+52],dest[idx+53],dest[idx+54],dest[idx+55]);
+                   Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+56],dest[idx+57],dest[idx+58],dest[idx+59],dest[idx+60],dest[idx+61],dest[idx+62],dest[idx+63]);
+                       
+                   code = bytebits_to_byte(dest+idx,32);
+                   code2 = bytebits_to_byte(dest+idx+32,32); 
+
+                   short version = bytebits_to_byte(dest+idx+14,4); 
+                   char unknown = bytebits_to_byte(dest+idx+19,8) ;
+                   uint16_t number = bytebits_to_byte(dest+idx+36,9); 
+                   
+                   Dbprintf("XSF(%02d)%02x:%d (%08x%08x)",version,unknown,number,code,code2);
+                   if (ledcontrol)     LED_D_OFF();
+               
+                       // if we're only looking for one tag 
+                       if (findone){
+                               LED_A_OFF();
+                               return;
+                       }               
+               }
+               WDT_HIT();
        }
        }
+       DbpString("Stopped");
+       if (ledcontrol) LED_A_OFF();
 }
 
 /*------------------------------
 }
 
 /*------------------------------
@@ -872,8 +936,9 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 // Write one bit to card
 void T55xxWriteBit(int bit)
 {
 // Write one bit to card
 void T55xxWriteBit(int bit)
 {
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
        if (bit == 0)
                SpinDelayUs(WRITE_0);
        else
        if (bit == 0)
                SpinDelayUs(WRITE_0);
        else
@@ -887,8 +952,9 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMod
 {
        unsigned int i;
 
 {
        unsigned int i;
 
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 
        // Give it a bit of time for the resonant antenna to settle.
        // And for the tag to fully power up
 
        // Give it a bit of time for the resonant antenna to settle.
        // And for the tag to fully power up
@@ -920,7 +986,7 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMod
        // Now perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
        // so wait a little more)
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
        // Now perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
        // so wait a little more)
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
        SpinDelay(20);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 }
        SpinDelay(20);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 }
@@ -931,6 +997,7 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
        uint8_t *dest = (uint8_t *)BigBuf;
        int m=0, i=0;
   
        uint8_t *dest = (uint8_t *)BigBuf;
        int m=0, i=0;
   
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        m = sizeof(BigBuf);
   // Clear destination buffer before sending the command
        memset(dest, 128, m);
        m = sizeof(BigBuf);
   // Clear destination buffer before sending the command
        memset(dest, 128, m);
@@ -941,7 +1008,7 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
   
        LED_D_ON();
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
   
        LED_D_ON();
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
   
        // Give it a bit of time for the resonant antenna to settle.
        // And for the tag to fully power up
   
        // Give it a bit of time for the resonant antenna to settle.
        // And for the tag to fully power up
@@ -967,7 +1034,7 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
   
   // Turn field on to read the response
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
   
   // Turn field on to read the response
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
   
        // Now do the acquisition
        i = 0;
   
        // Now do the acquisition
        i = 0;
@@ -995,6 +1062,7 @@ void T55xxReadTrace(void){
        uint8_t *dest = (uint8_t *)BigBuf;
        int m=0, i=0;
   
        uint8_t *dest = (uint8_t *)BigBuf;
        int m=0, i=0;
   
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        m = sizeof(BigBuf);
   // Clear destination buffer before sending the command
        memset(dest, 128, m);
        m = sizeof(BigBuf);
   // Clear destination buffer before sending the command
        memset(dest, 128, m);
@@ -1005,7 +1073,7 @@ void T55xxReadTrace(void){
   
        LED_D_ON();
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
   
        LED_D_ON();
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
   
        // Give it a bit of time for the resonant antenna to settle.
        // And for the tag to fully power up
   
        // Give it a bit of time for the resonant antenna to settle.
        // And for the tag to fully power up
@@ -1021,7 +1089,7 @@ void T55xxReadTrace(void){
   
   // Turn field on to read the response
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
   
   // Turn field on to read the response
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
   
        // Now do the acquisition
        i = 0;
   
        // Now do the acquisition
        i = 0;
@@ -1164,6 +1232,26 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT)
        DbpString("DONE!");
 }
 
        DbpString("DONE!");
 }
 
+void CopyIOtoT55x7(uint32_t hi, uint32_t lo, uint8_t longFMT)
+{
+   int data1=0, data2=0; //up to six blocks for long format
+       
+    data1 = hi;  // load preamble
+    data2 = lo;
+    
+    LED_D_ON();
+    // Program the data blocks for supplied ID
+    // and the block 0 for HID format
+    T55xxWriteBlock(data1,1,0,0);
+    T55xxWriteBlock(data2,2,0,0);
+       
+    //Config Block
+    T55xxWriteBlock(0x00147040,0,0,0);
+    LED_D_OFF();
+       
+    DbpString("DONE!");
+}
+
 // Define 9bit header for EM410x tags
 #define EM410X_HEADER          0x1FF
 #define EM410X_ID_LENGTH       40
 // Define 9bit header for EM410x tags
 #define EM410X_HEADER          0x1FF
 #define EM410X_ID_LENGTH       40
@@ -1690,8 +1778,9 @@ void SendForward(uint8_t fwd_bit_count) {
   LED_D_ON();
   
   //Field on
   LED_D_ON();
   
   //Field on
+  FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
   FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
   FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
   
   // Give it a bit of time for the resonant antenna to settle.
   // And for the tag to fully power up
   
   // Give it a bit of time for the resonant antenna to settle.
   // And for the tag to fully power up
@@ -1703,7 +1792,7 @@ void SendForward(uint8_t fwd_bit_count) {
   FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
   SpinDelayUs(55*8); //55 cycles off (8us each)for 4305
   FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
   FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
   SpinDelayUs(55*8); //55 cycles off (8us each)for 4305
   FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);//field on
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
   SpinDelayUs(16*8); //16 cycles on (8us each)
   
   // now start writting
   SpinDelayUs(16*8); //16 cycles on (8us each)
   
   // now start writting
@@ -1715,7 +1804,7 @@ void SendForward(uint8_t fwd_bit_count) {
       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
       SpinDelayUs(23*8); //16-4 cycles off (8us each)
       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
       SpinDelayUs(23*8); //16-4 cycles off (8us each)
       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-      FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);//field on
+      FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
       SpinDelayUs(9*8); //16 cycles on (8us each)
     }
   }
       SpinDelayUs(9*8); //16 cycles on (8us each)
     }
   }
Impressum, Datenschutz