#include "cmdlf.h"
#include "cmdmain.h"
#include "util.h"
+#include "cmdscript.h"
unsigned int current_command = CMD_UNKNOWN;
static command_t CommandTable[] =
{
- {"help", CmdHelp, 1, "This help. Use '<command> help' for details of the following commands:\n"},
+ {"help", CmdHelp, 1, "This help. Use '<command> help' for details of a particular command."},
{"data", CmdData, 1, "{ Plot window / data buffer manipulation... }"},
- {"exit", CmdQuit, 1, "Exit program"},
{"hf", CmdHF, 1, "{ HF commands... }"},
{"hw", CmdHW, 1, "{ Hardware commands... }"},
{"lf", CmdLF, 1, "{ LF commands... }"},
- {"quit", CmdQuit, 1, "Quit program"},
+ {"script", CmdScript, 1,"{ Scripting commands }"},
+ {"quit", CmdQuit, 1, "Exit program"},
+ {"exit", CmdQuit, 1, "Exit program"},
{NULL, NULL, 0, NULL}
};
+command_t* getTopLevelCommandTable()
+{
+ return CommandTable;
+}
int CmdHelp(const char *Cmd)
{
CmdsHelp(CommandTable);
exit(0);
return 0;
}
-int getCommand(UsbCommand* response);
-void storeCommand(UsbCommand *command);
+/**
+ * @brief This method should be called when sending a new command to the pm3. In case any old
+ * responses from previous commands are stored in the buffer, a call to this method should clear them.
+ * A better method could have been to have explicit command-ACKS, so we can know which ACK goes to which
+ * operation. Right now we'll just have to live with this.
+ */
+void clearCommandBuffer()
+{
+ //This is a very simple operation
+ cmd_tail = cmd_head;
+}
+
+/**
+ * @brief storeCommand stores a USB command in a circular buffer
+ * @param UC
+ */
+void storeCommand(UsbCommand *command)
+{
+ if( ( cmd_head+1) % CMD_BUFFER_SIZE == cmd_tail)
+ {
+ //If these two are equal, we're about to overwrite in the
+ // circular buffer.
+ PrintAndLog("WARNING: Command buffer about to overwrite command! This needs to be fixed!");
+ }
+ //Store the command at the 'head' location
+ UsbCommand* destination = &cmdBuffer[cmd_head];
+ memcpy(destination, command, sizeof(UsbCommand));
+
+ cmd_head = (cmd_head +1) % CMD_BUFFER_SIZE; //increment head and wrap
+
+}
+/**
+ * @brief getCommand gets a command from an internal circular buffer.
+ * @param response location to write command
+ * @return 1 if response was returned, 0 if nothing has been received
+ */
+int getCommand(UsbCommand* response)
+{
+ //If head == tail, there's nothing to read, or if we just got initialized
+ if(cmd_head == cmd_tail){
+ return 0;
+ }
+ //Pick out the next unread command
+ UsbCommand* last_unread = &cmdBuffer[cmd_tail];
+ memcpy(response, last_unread, sizeof(UsbCommand));
+ //Increment tail - this is a circular buffer, so modulo buffer size
+ cmd_tail = (cmd_tail +1 ) % CMD_BUFFER_SIZE;
+
+ return 1;
+
+}
+
/**
* Waits for a certain response type. This method waits for a maximum of
* ms_timeout milliseconds for a specified response command.
*/
bool WaitForResponseTimeout(uint32_t cmd, UsbCommand* response, size_t ms_timeout) {
+ UsbCommand resp;
+
if (response == NULL) {
- UsbCommand resp;
response = &resp;
}
return;
} break;
- case CMD_MEASURED_ANTENNA_TUNING: {
- int peakv, peakf;
- int vLf125, vLf134, vHf;
- vLf125 = UC->arg[0] & 0xffff;
- vLf134 = UC->arg[0] >> 16;
- vHf = UC->arg[1] & 0xffff;;
- peakf = UC->arg[2] & 0xffff;
- peakv = UC->arg[2] >> 16;
- PrintAndLog("");
- PrintAndLog("# LF antenna: %5.2f V @ 125.00 kHz", vLf125/1000.0);
- PrintAndLog("# LF antenna: %5.2f V @ 134.00 kHz", vLf134/1000.0);
- PrintAndLog("# LF optimal: %5.2f V @%9.2f kHz", peakv/1000.0, 12000.0/(peakf+1));
- PrintAndLog("# HF antenna: %5.2f V @ 13.56 MHz", vHf/1000.0);
- if (peakv<2000)
- PrintAndLog("# Your LF antenna is unusable.");
- else if (peakv<10000)
- PrintAndLog("# Your LF antenna is marginal.");
- if (vHf<2000)
- PrintAndLog("# Your HF antenna is unusable.");
- else if (vHf<5000)
- PrintAndLog("# Your HF antenna is marginal.");
- } break;
+ // case CMD_MEASURED_ANTENNA_TUNING: {
+ // int peakv, peakf;
+ // int vLf125, vLf134, vHf;
+ // vLf125 = UC->arg[0] & 0xffff;
+ // vLf134 = UC->arg[0] >> 16;
+ // vHf = UC->arg[1] & 0xffff;;
+ // peakf = UC->arg[2] & 0xffff;
+ // peakv = UC->arg[2] >> 16;
+ // PrintAndLog("");
+ // PrintAndLog("# LF antenna: %5.2f V @ 125.00 kHz", vLf125/1000.0);
+ // PrintAndLog("# LF antenna: %5.2f V @ 134.00 kHz", vLf134/1000.0);
+ // PrintAndLog("# LF optimal: %5.2f V @%9.2f kHz", peakv/1000.0, 12000.0/(peakf+1));
+ // PrintAndLog("# HF antenna: %5.2f V @ 13.56 MHz", vHf/1000.0);
+ // if (peakv<2000)
+ // PrintAndLog("# Your LF antenna is unusable.");
+ // else if (peakv<10000)
+ // PrintAndLog("# Your LF antenna is marginal.");
+ // if (vHf<2000)
+ // PrintAndLog("# Your HF antenna is unusable.");
+ // else if (vHf<5000)
+ // PrintAndLog("# Your HF antenna is marginal.");
+ // } break;
case CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K: {
// printf("received samples: ");
}
-/**
- * @brief This method should be called when sending a new command to the pm3. In case any old
- * responses from previous commands are stored in the buffer, a call to this method should clear them.
- * A better method could have been to have explicit command-ACKS, so we can know which ACK goes to which
- * operation. Right now we'll just have to live with this.
- */
-void clearCommandBuffer()
-{
- //This is a very simple operation
- cmd_tail = cmd_head;
-}
-
-/**
- * @brief storeCommand stores a USB command in a circular buffer
- * @param UC
- */
-void storeCommand(UsbCommand *command)
-{
- if( ( cmd_head+1) % CMD_BUFFER_SIZE == cmd_tail)
- {
- //If these two are equal, we're about to overwrite in the
- // circular buffer.
- PrintAndLog("WARNING: Command buffer about to overwrite command! This needs to be fixed!");
- }
- //Store the command at the 'head' location
- UsbCommand* destination = &cmdBuffer[cmd_head];
- memcpy(destination, command, sizeof(UsbCommand));
-
- cmd_head = (cmd_head +1) % CMD_BUFFER_SIZE; //increment head and wrap
-
-}
-/**
- * @brief getCommand gets a command from an internal circular buffer.
- * @param response location to write command
- * @return 1 if response was returned, 0 if nothing has been received
- */
-int getCommand(UsbCommand* response)
-{
- //If head == tail, there's nothing to read, or if we just got initialized
- if(cmd_head == cmd_tail){
- return 0;
- }
- //Pick out the next unread command
- UsbCommand* last_unread = &cmdBuffer[cmd_tail];
- memcpy(response, last_unread, sizeof(UsbCommand));
- //Increment tail - this is a circular buffer, so modulo buffer size
- cmd_tail = (cmd_tail +1 ) % CMD_BUFFER_SIZE;
-
- return 1;
-
-}
projects / proxmark3-svn / blobdiff