Separate WITH_LF and WITH_LF_StandAlone

[proxmark3-svn] / armsrc / lfops.c

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index 9c6c9ed8d85b7339a3be90833368760d10da598e..911ba8da1c62e81d8fc7973928e931bf87cede3e 100644 (file)
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -4,7 +4,7 @@
 // the license.
 //-----------------------------------------------------------------------------
 // Miscellaneous routines for low frequency tag operations.
 // the license.
 //-----------------------------------------------------------------------------
 // Miscellaneous routines for low frequency tag operations.

-// Tags supported here so far are Texas Instruments (TI), HID
+// Tags supported here so far are Texas Instruments (TI), HID, EM4x05, EM410x

 // Also routines for raw mode reading/simulating of LF waveform
 //-----------------------------------------------------------------------------
 
 // Also routines for raw mode reading/simulating of LF waveform
 //-----------------------------------------------------------------------------
 


@@ -28,51 +28,103 @@
  */
 void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint32_t period_1, uint8_t *command)
 {
  */
 void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint32_t period_1, uint8_t *command)
 {

+       // start timer
+       StartTicks();

 
 

-       int divisor_used = 95; // 125 KHz
-       // see if 'h' was specified
-
-       if (command[strlen((char *) command) - 1] == 'h')
-               divisor_used = 88; // 134.8 KHz
+       // use lf config settings
+       sample_config *sc = getSamplingConfig();

 
 

-       sample_config sc = { 0,0,1, divisor_used, 0};
-       setSamplingConfig(&sc);
-       //clear read buffer
-       BigBuf_Clear_keep_EM();
-
-       /* Make sure the tag is reset */
+       // Make sure the tag is reset

        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);

-       SpinDelay(2500);
+       WaitMS(2500);

 
 

-       LFSetupFPGAForADC(sc.divisor, 1);
+       // clear read buffer (after fpga bitstream loaded...)
+       BigBuf_Clear_keep_EM();

 
 

-       // And a little more time for the tag to fully power up
-       SpinDelay(2000);
+       // power on
+       LFSetupFPGAForADC(sc->divisor, 1);

 
 

+       // And a little more time for the tag to fully power up
+       WaitMS(2000);
+       // if delay_off = 0 then just bitbang 1 = antenna on 0 = off for respective periods.
+       bool bitbang = delay_off == 0;

        // now modulate the reader field
        // now modulate the reader field

-       while(*command != '\0' && *command != ' ') {
+
+       if (bitbang) {
+               // HACK it appears the loop and if statements take up about 7us so adjust waits accordingly...
+               uint8_t hack_cnt = 7;
+               if (period_0 < hack_cnt || period_1 < hack_cnt) {
+                       DbpString("Warning periods cannot be less than 7us in bit bang mode");
+                       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+                       LED_D_OFF();
+                       return;
+               }
+
+               // hack2 needed---  it appears to take about 8-16us to turn the antenna back on 
+               // leading to ~ 1 to 2 125khz samples extra in every off period 
+               // so we should test for last 0 before next 1 and reduce period_0 by this extra amount...
+               // but is this time different for every antenna or other hw builds???  more testing needed
+
+               // prime cmd_len to save time comparing strings while modulating
+               int cmd_len = 0;
+               while(command[cmd_len] != '\0' && command[cmd_len] != ' ')
+                       cmd_len++;
+
+               int counter = 0;
+               bool off = false;
+               for (counter = 0; counter < cmd_len; counter++) {
+                       // if cmd = 0 then turn field off
+                       if (command[counter] == '0') {
+                               // if field already off leave alone (affects timing otherwise)
+                               if (off == false) {
+                                       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+                                       LED_D_OFF();
+                                       off = true;
+                               }
+                               // note we appear to take about 7us to switch over (or run the if statements/loop...)
+                               WaitUS(period_0-hack_cnt);
+                       // else if cmd = 1 then turn field on
+                       } else {
+                               // if field already on leave alone (affects timing otherwise)
+                               if (off) {
+                                       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+                                       LED_D_ON();
+                                       off = false;
+                               }
+                               // note we appear to take about 7us to switch over (or run the if statements/loop...)
+                               WaitUS(period_1-hack_cnt);
+                       }
+               }
+       } else { // old mode of cmd read using delay as off period
+               while(*command != '\0' && *command != ' ') {
+                       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+                       LED_D_OFF();
+                       WaitUS(delay_off);
+                       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc->divisor);
+                       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+                       LED_D_ON();
+                       if(*(command++) == '0') {
+                               WaitUS(period_0);
+                       } else {
+                               WaitUS(period_1);
+                       }
+               }

                FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
                LED_D_OFF();
                FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
                LED_D_OFF();

-               SpinDelayUs(delay_off);
-               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
-
-               FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-               LED_D_ON();
-               if(*(command++) == '0')
-                       SpinDelayUs(period_0);
-               else
-                       SpinDelayUs(period_1);
+               WaitUS(delay_off);
+               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc->divisor);

        }
        }

-       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-       LED_D_OFF();
-       SpinDelayUs(delay_off);
-       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);

 
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 
        // now do the read
 
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 
        // now do the read

-       DoAcquisition_config(false);
+       DoAcquisition_config(false, 0);
+
+       // Turn off antenna
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+       // tell client we are done
+       cmd_send(CMD_ACK,0,0,0,0,0);

 }
 
 /* blank r/w tag data stream
 }
 
 /* blank r/w tag data stream


@@ -387,7 +439,8 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
        int i;
        uint8_t *tab = BigBuf_get_addr();
 
        int i;
        uint8_t *tab = BigBuf_get_addr();
 

-       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+       //note FpgaDownloadAndGo destroys the bigbuf so be sure this is called before now...
+       //FpgaDownloadAndGo(FPGA_BITSTREAM_LF);  

        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
 
        AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
 
        AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;


@@ -401,13 +454,19 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
        i = 0;
        for(;;) {
                //wait until SSC_CLK goes HIGH
        i = 0;
        for(;;) {
                //wait until SSC_CLK goes HIGH

+               int ii = 0;

                while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
                while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {

-                       if(BUTTON_PRESS() || (usb_poll_validate_length() )) {
-                               FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-                               DbpString("Stopped");
-                               return;
+                       //only check every 1000th time (usb_poll_validate_length on some systems was too slow)
+                       if ( ii == 1000 ) {
+                               if (BUTTON_PRESS() || usb_poll_validate_length() ) {
+                                       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+                                       DbpString("Stopped");
+                                       return;
+                               }
+                               ii=0;

                        }
                        WDT_HIT();
                        }
                        WDT_HIT();

+                       ii++;

                }
                if (ledcontrol)
                        LED_D_ON();
                }
                if (ledcontrol)
                        LED_D_ON();


@@ -419,14 +478,20 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
 
                if (ledcontrol)
                        LED_D_OFF();
 
                if (ledcontrol)
                        LED_D_OFF();

+               ii=0;

                //wait until SSC_CLK goes LOW
                while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
                //wait until SSC_CLK goes LOW
                while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {

-                       if(BUTTON_PRESS() || (usb_poll_validate_length() )) {
-                               DbpString("Stopped");
-                               FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-                               return;
+                       //only check every 1000th time (usb_poll_validate_length on some systems was too slow)
+                       if ( ii == 1000 ) { 
+                               if (BUTTON_PRESS() || usb_poll_validate_length() ) {
+                                       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+                                       DbpString("Stopped");
+                                       return;
+                               }
+                               ii=0;

                        }
                        WDT_HIT();
                        }
                        WDT_HIT();

+                       ii++;

                }
 
                i++;
                }
 
                i++;


@@ -503,7 +568,7 @@ static void fcAll(uint8_t fc, int *n, uint8_t clock, uint16_t *modCnt)
        uint8_t wavesPerClock = clock/fc;
        uint8_t mod = clock % fc;    //modifier
        uint8_t modAdj = fc/mod;     //how often to apply modifier
        uint8_t wavesPerClock = clock/fc;
        uint8_t mod = clock % fc;    //modifier
        uint8_t modAdj = fc/mod;     //how often to apply modifier

-       bool modAdjOk = !(fc % mod); //if (fc % mod==0) modAdjOk=TRUE;
+       bool modAdjOk = !(fc % mod); //if (fc % mod==0) modAdjOk=true;

        // loop through clock - step field clock
        for (uint8_t idx=0; idx < wavesPerClock; idx++){
                // put 1/2 FC length 1's and 1/2 0's per field clock wave (to create the wave)
        // loop through clock - step field clock
        for (uint8_t idx=0; idx < wavesPerClock; idx++){
                // put 1/2 FC length 1's and 1/2 0's per field clock wave (to create the wave)


@@ -545,6 +610,9 @@ void CmdHIDsimTAG(int hi, int lo, int ledcontrol)
                DbpString("Tags can only have 44 bits. - USE lf simfsk for larger tags");
                return;
        }
                DbpString("Tags can only have 44 bits. - USE lf simfsk for larger tags");
                return;
        }

+       // set LF so we don't kill the bigbuf we are setting with simulation data.
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+

        fc(0,&n);
        // special start of frame marker containing invalid bit sequences
        fc(8,  &n);     fc(8,  &n); // invalid
        fc(0,&n);
        // special start of frame marker containing invalid bit sequences
        fc(8,  &n);     fc(8,  &n); // invalid


@@ -595,6 +663,9 @@ void CmdFSKsimTAG(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
        uint8_t clk = arg2 & 0xFF;
        uint8_t invert = (arg2 >> 8) & 1;
 
        uint8_t clk = arg2 & 0xFF;
        uint8_t invert = (arg2 >> 8) & 1;
 

+       // set LF so we don't kill the bigbuf we are setting with simulation data.
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+

        for (i=0; i<size; i++){
                if (BitStream[i] == invert){
                        fcAll(fcLow, &n, clk, &modCnt);
        for (i=0; i<size; i++){
                if (BitStream[i] == invert){
                        fcAll(fcLow, &n, clk, &modCnt);


@@ -670,6 +741,9 @@ void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
        uint8_t separator = arg2 & 1;
        uint8_t invert = (arg2 >> 8) & 1;
 
        uint8_t separator = arg2 & 1;
        uint8_t invert = (arg2 >> 8) & 1;
 

+       // set LF so we don't kill the bigbuf we are setting with simulation data.
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+

        if (encoding==2){  //biphase
                uint8_t phase=0;
                for (i=0; i<size; i++){
        if (encoding==2){  //biphase
                uint8_t phase=0;
                for (i=0; i<size; i++){


@@ -741,11 +815,14 @@ void CmdPSKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
        uint8_t carrier = arg1 & 0xFF;
        uint8_t invert = arg2 & 0xFF;
        uint8_t curPhase = 0;
        uint8_t carrier = arg1 & 0xFF;
        uint8_t invert = arg2 & 0xFF;
        uint8_t curPhase = 0;

+       // set LF so we don't kill the bigbuf we are setting with simulation data.
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+

        for (i=0; i<size; i++){
                if (BitStream[i] == curPhase){
        for (i=0; i<size; i++){
                if (BitStream[i] == curPhase){

-                       pskSimBit(carrier, &n, clk, &curPhase, FALSE);
+                       pskSimBit(carrier, &n, clk, &curPhase, false);

                } else {
                } else {

-                       pskSimBit(carrier, &n, clk, &curPhase, TRUE);
+                       pskSimBit(carrier, &n, clk, &curPhase, true);

                }
        }
        Dbprintf("Simulating with Carrier: %d, clk: %d, invert: %d, n: %d",carrier, clk, invert, n);
                }
        }
        Dbprintf("Simulating with Carrier: %d, clk: %d, invert: %d, n: %d",carrier, clk, invert, n);


@@ -769,6 +846,7 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
        size_t size; 
        uint32_t hi2=0, hi=0, lo=0;
        int idx=0;
        size_t size; 
        uint32_t hi2=0, hi=0, lo=0;
        int idx=0;

+       int dummyIdx = 0;

        // Configure to go in 125Khz listen mode
        LFSetupFPGAForADC(95, true);
 
        // Configure to go in 125Khz listen mode
        LFSetupFPGAForADC(95, true);
 


@@ -784,7 +862,7 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
                // FSK demodulator
                //size = sizeOfBigBuff;  //variable size will change after demod so re initialize it before use
                size = 50*128*2; //big enough to catch 2 sequences of largest format
                // FSK demodulator
                //size = sizeOfBigBuff;  //variable size will change after demod so re initialize it before use
                size = 50*128*2; //big enough to catch 2 sequences of largest format

-               idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo);
+               idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo, &dummyIdx);

                
                if (idx>0 && lo>0 && (size==96 || size==192)){
                        // go over previously decoded manchester data and decode into usable tag ID
                
                if (idx>0 && lo>0 && (size==96 || size==192)){
                        // go over previously decoded manchester data and decode into usable tag ID


@@ -861,7 +939,7 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 {
        uint8_t *dest = BigBuf_get_addr();
        size_t size; 
 {
        uint8_t *dest = BigBuf_get_addr();
        size_t size; 

-       int idx=0;
+       int idx=0, dummyIdx=0;

        //clear read buffer
        BigBuf_Clear_keep_EM();
        // Configure to go in 125Khz listen mode
        //clear read buffer
        BigBuf_Clear_keep_EM();
        // Configure to go in 125Khz listen mode


@@ -875,7 +953,7 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
                DoAcquisition_default(-1,true);
                // FSK demodulator
                size = 50*128*2; //big enough to catch 2 sequences of largest format
                DoAcquisition_default(-1,true);
                // FSK demodulator
                size = 50*128*2; //big enough to catch 2 sequences of largest format

-               idx = AWIDdemodFSK(dest, &size);
+               idx = AWIDdemodFSK(dest, &size, &dummyIdx);

                
                if (idx<=0 || size!=96) continue;
                // Index map
                
                if (idx<=0 || size!=96) continue;
                // Index map


@@ -1017,6 +1095,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
        uint8_t version=0;
        uint8_t facilitycode=0;
        uint16_t number=0;
        uint8_t version=0;
        uint8_t facilitycode=0;
        uint16_t number=0;

+       int dummyIdx=0;

        //clear read buffer
        BigBuf_Clear_keep_EM();
        // Configure to go in 125Khz listen mode
        //clear read buffer
        BigBuf_Clear_keep_EM();
        // Configure to go in 125Khz listen mode


@@ -1028,7 +1107,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
                DoAcquisition_default(-1,true);
                //fskdemod and get start index
                WDT_HIT();
                DoAcquisition_default(-1,true);
                //fskdemod and get start index
                WDT_HIT();

-               idx = IOdemodFSK(dest, BigBuf_max_traceLen());
+               idx = IOdemodFSK(dest, BigBuf_max_traceLen(), &dummyIdx);

                if (idx<0) continue;
                //valid tag found
 
                if (idx<0) continue;
                //valid tag found
 


@@ -1132,7 +1211,7 @@ void T55xxResetRead(void) {
        TurnReadLFOn(READ_GAP);
 
        // Acquisition
        TurnReadLFOn(READ_GAP);
 
        // Acquisition

-       doT55x7Acquisition(BigBuf_max_traceLen());
+       DoPartialAcquisition(0, true, BigBuf_max_traceLen(), 0);

 
        // Turn the field off
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
 
        // Turn the field off
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off


@@ -1161,7 +1240,8 @@ void T55xxWriteBlockExt(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg
        // Std Opcode 10
        T55xxWriteBit(testMode ? 0 : 1);
        T55xxWriteBit(testMode ? 1 : Page); //Page 0
        // Std Opcode 10
        T55xxWriteBit(testMode ? 0 : 1);
        T55xxWriteBit(testMode ? 1 : Page); //Page 0

-       if (PwdMode){
+
+       if (PwdMode) {

                // Send Pwd
                for (i = 0x80000000; i != 0; i >>= 1)
                        T55xxWriteBit(Pwd & i);
                // Send Pwd
                for (i = 0x80000000; i != 0; i >>= 1)
                        T55xxWriteBit(Pwd & i);


@@ -1181,22 +1261,19 @@ void T55xxWriteBlockExt(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg
        // so wait a little more)
 
        // "there is a clock delay before programming" 
        // so wait a little more)
 
        // "there is a clock delay before programming" 

-       //  - programming takes ~5.6ms for t5577 ~18ms for E5550
+       //  - programming takes ~5.6ms for t5577 ~18ms for E5550 or t5567

        //  so we should wait 1 clock + 5.6ms then read response? 
        //  so we should wait 1 clock + 5.6ms then read response? 

-       //  but we need to know we are dealing with t55x7 vs e5550 (or q5) marshmellow...
+       //  but we need to know we are dealing with t5577 vs t5567 vs e5550 (or q5) marshmellow...

        if (testMode) {
        if (testMode) {

-               // Turn field on to read the response
-               TurnReadLFOn(READ_GAP);
-
-               // Acquisition
-               // Now do the acquisition
-               // Now do the acquisition
-               DoPartialAcquisition(20, true, 12000);
+               //TESTMODE TIMING TESTS: 
+               // <566us does nothing 
+               // 566-568 switches between wiping to 0s and doing nothing
+               // 5184 wipes and allows 1 block to be programmed.
+               // indefinite power on wipes and then programs all blocks with bitshifted data sent.
+               TurnReadLFOn(5184); 

 
 

-               //doT55x7Acquisition(12000);

        } else {
                TurnReadLFOn(20 * 1000);
        } else {
                TurnReadLFOn(20 * 1000);

-       }

                //could attempt to do a read to confirm write took
                // as the tag should repeat back the new block 
                // until it is reset, but to confirm it we would 
                //could attempt to do a read to confirm write took
                // as the tag should repeat back the new block 
                // until it is reset, but to confirm it we would 


@@ -1205,6 +1282,9 @@ void T55xxWriteBlockExt(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg
                // response should be (for t55x7) a 0 bit then (ST if on) 
                // block data written in on repeat until reset. 
 
                // response should be (for t55x7) a 0 bit then (ST if on) 
                // block data written in on repeat until reset. 
 

+               //DoPartialAcquisition(20, true, 12000);
+       }
+

        // turn field off
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        LED_A_OFF();
        // turn field off
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        LED_A_OFF();


@@ -1263,9 +1343,7 @@ void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
 
        // Acquisition
        // Now do the acquisition
 
        // Acquisition
        // Now do the acquisition

-       DoPartialAcquisition(0, true, 12000);
-
-       //      doT55x7Acquisition(12000);
+       DoPartialAcquisition(0, true, 12000, 0);

 
        // Turn the field off
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
 
        // Turn the field off
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off


@@ -1391,10 +1469,10 @@ void CopyIndala224toT55x7(uint32_t uid1, uint32_t uid2, uint32_t uid3, uint32_t
        //Program the 7 data blocks for supplied 224bit UID
        uint32_t data[] = {0, uid1, uid2, uid3, uid4, uid5, uid6, uid7};
        // and the block 0 for Indala224 format 
        //Program the 7 data blocks for supplied 224bit UID
        uint32_t data[] = {0, uid1, uid2, uid3, uid4, uid5, uid6, uid7};
        // and the block 0 for Indala224 format 

-       //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7)
-       data[0] = T55x7_BITRATE_RF_32 | T55x7_MODULATION_PSK1 | (7 << T55x7_MAXBLOCK_SHIFT);
+       //Config for Indala (RF/32;PSK2 with RF/2;Maxblock=7)
+       data[0] = T55x7_BITRATE_RF_32 | T55x7_MODULATION_PSK2 | (7 << T55x7_MAXBLOCK_SHIFT);

        //TODO add selection of chip for Q5 or T55x7
        //TODO add selection of chip for Q5 or T55x7

-       // data[0] = (((32-2)>>1)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_PSK1 | 7 << T5555_MAXBLOCK_SHIFT;
+       // data[0] = (((32-2)>>1)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_PSK2 | 7 << T5555_MAXBLOCK_SHIFT;

        WriteT55xx(data, 0, 8);
        //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
        //      T5567WriteBlock(0x603E10E2,0);
        WriteT55xx(data, 0, 8);
        //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
        //      T5567WriteBlock(0x603E10E2,0);


@@ -1664,7 +1742,7 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
        SendForward(fwd_bit_count);
        WaitUS(400);
        // Now do the acquisition
        SendForward(fwd_bit_count);
        WaitUS(400);
        // Now do the acquisition

-       DoPartialAcquisition(20, true, 6000);
+       DoPartialAcquisition(20, true, 6000, 1000);

        
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
        LED_A_OFF();
        
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
        LED_A_OFF();


@@ -1697,7 +1775,7 @@ void EM4xWriteWord(uint32_t flag, uint32_t Data, uint32_t Pwd) {
 
        WaitUS(6500);
        //Capture response if one exists
 
        WaitUS(6500);
        //Capture response if one exists

-       DoPartialAcquisition(20, true, 6000);
+       DoPartialAcquisition(20, true, 6000, 1000);

 
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
        LED_A_OFF();
 
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
        LED_A_OFF();


@@ -1754,7 +1832,7 @@ void Cotag(uint32_t arg0) {
        switch(rawsignal) {
                case 0: doCotagAcquisition(50000); break;
                case 1: doCotagAcquisitionManchester(); break;
        switch(rawsignal) {
                case 0: doCotagAcquisition(50000); break;
                case 1: doCotagAcquisitionManchester(); break;

-               case 2: DoAcquisition_config(TRUE); break;
+               case 2: DoAcquisition_config(true, 0); break;

        }
 
        // Turn the field off
        }
 
        // Turn the field off